Study on Aromatic Phosphines for Novel Fluorometry of Hydroperoxides (I) -Synthesis and Spectral Properties of Diphenyl Aryl Phosphines and Their Oxides

Abstract

1-Naphthyldiphenylphosphine (NDPP), 9-anthryldiphenylphosphine (ADPP) and diphenyl-1-pyrenylphosphine (DPPP) and their oxides were prepared from triphenyl-phosphine (TPP) and the corresponding aryl bromides. These phosphines had no fluorescence, but their oxides showed blue fluorescence. The order of fluorescence intensities of these oxides were DPPP oxide > ADPP oxide > NDPP oxide. Hydroperoxides oxidized these phosphines to the corresponding oxides quantitatively. The relative reactivities were TPP > NDPP > DPPP > ADPP. The phosphines were stable in the dark, however, unstable in the light in chloroform. The reaction is proposed as novel type of fluorometry for hydroperoxides.     

钯(Ⅱ)催化CO/乙烯交替共聚反应机理反应状态下钯/膦配位结构的原位^3^1P NMR研究

应用加温加压原位核磁技术, 考察了不同配比的钯/膦催化剂在共聚反应条件下(C2H4/CO=1:1, 2.0MPa)的^3^1P NMR谱。实验表明, 在C2H4/CO共聚反应条件下, DPPP(1, 3-双二苯基膦丙烷)与Pd(OAc)2生成比较稳定的六元环螯合物,没有发现游离DPPP的^3^1P NMR信号。当反应温度高于100℃时, 螯合物即开始分解; 反应温度高于260℃时, 螯合物完全分解。DPPP/Pd(OAc)2=1时, 在反应条件下生成有活性的螯合物(DPPP)Pd(OCOCF3)2; DPPP/Pd(OAc)2>=2时, 在反应条件下生成无活性螯合物(DPPP)2Pd(OCOCF3)2。     

Core Charge Density Dominated Size-Conversion from Au6P8 to Au8P8Cl2

The stimulus-response of metal nanoclusters is crucial to their applications in catalysis and bio-clinics, etc. However, its mechanistic origin has not been well studied. Herein, the mechanism of the Au^IPPh₃Cl-induced size-conversion from [Au₆(DPPP)₄]²⁺ to [Au₈(DPPP)₄Cl₂]²⁺ (DPPP is short for 1,3-bis(diphenylphosphino)propane) is theoretically investigated with density functional theory (DFT) calculations. The optimal size-growth pathway, and the key structural parameters were elucidated. The Au−P bond dissociation steps are key to the size-growth, the easiness of which was determined by the charge density of the metallic core of the cluster precursors (i.e., “core charge density”). This study sheds light on the inherent structure–reactivity relationships during the size-conversion, and will benefit the deep understanding on the kinetics of more complex systems.     

Effect of polymer nature on the structure and properties of gel composites with incorporated bentonite particles

Composite gels based on polyacrylamide and poly(N-isopropyl acrylamide) with incorporated sodium bentonite particles are synthesized. It is shown that the presence of hydrophobic isopropyl groups in a polymer molecule promotes the subsequent formation of highly ordered aggregates of clay and cetylpyridinium chloride in a gel composite. An increase in temperature results in the collapse of composite gels based on poly(N-isopropyl acrylamide); however, no marked changes in the structure of lamellar aggregates of clay and surfactant are observed. It is revealed that the gel can stabilize lamellar structures formed in organoclay suspension prior to the incorporation into swollen polymer network.     

Study on Aromatic Phosphines for Novel Fluorometry of Hydroperoxides (II) -The Determination of Lipid Hydroperoxides with Diphenyl-1-Pyrenylphosphine -

Abstract

A new fluorometric determination of hydroperoxides was proposed. Non-fluorescent diphenyl-1-pyrenyl-phosphine (DPPP) was oxidized quantitatively by hydroperoxides to a strong fluorescent DPPP oxide. A sensitive assay for lipid hydroperoxides was developed based on the reaction. The reaction of lipid hydroperoxides with DPPP was conducted in the dark in the mixture of chloroform and methanol at 60°C within 60 min. The contents of hydroperoxides showed linear relation to the fluorescence intensities in a wide concentration range. The sensitivity was 10,000 times higher than conventional iodometry. The correlation constant between peroxide values obtained by iodometry and by this method was 0.9993 (n=10). The sample size was minimized to less than 3 mg per tube.     

AN IMPROVED SYNTHETIC METHOD FOR DIPHENYL-1-PYRENYLPHOSPHINE AND THE PROPERTIES AND STRUCTURE OF ITS BORANE ADDUCT

An efficient synthetic method for diphenyl-1-pyrenylphosphine, DPPP, has been developed involving a low temperature Li-Br exchange reaction using the commercially available 1-bromopyrene. An estimate of the donor ability of this phosphine has been obtained by measuring the A₁υ (CO) band of the Ni(CO)₃L complex which was found to be 0.4 wave numbers lower than that from the PPh₃ complex indicating that DPPP is a slightly better donor than PPh₃. The BH₃ adduct of DPPP has been prepared and, as the situation for the oxide of DPPP, this adduct is fluorescent. It is estimated that the fluorescence intensity is about half that of DPPPO. An x-ray structure of this adduct has been obtained, and the bond lengths and angles appear to be in expected ranges.     

Morphological studies of a (self-assembling oil gelator/liquid crystal) composite system

The aggregation structure of a novel (self-assembling oil gelator/liquid crystal) composite was investigated using light scattering studies and morphological observations. The oil gelator forms a self-assembled-networks aggregate in an organic solvent with a low molecular weight liquid crystal (LC). It became apparent from Hv light scattering patterns and polarizing optical microscopy that two types of LC molecular alignments exist in the composite: a random orientation and a spherulite type one in a nematic gel state. Also, optical and atomic force microscopic observations revealed that fibrils which formed bundles in the fibre-like and spherulite-like aggregates, were formed in the composite. The alignment of the liquid crystal molecules was related to the aggregation structure of the self-assembling oil gelator in a liquid crystal gel state.     

Morphological studies of a (self-assembling oil gelator/liquid crystal) composite system

The aggregation structure of a novel (self-assembling oil gelator/liquid crystal) composite was investigated using light scattering studies and morphological observations. The oil gelator forms a self-assembled-networks aggregate in an organic solvent with a low molecular weight liquid crystal (LC). It became apparent from Hv light scattering patterns and polarizing optical microscopy that two types of LC molecular alignments exist in the composite: a random orientation and a spherulite type one in a nematic gel state. Also, optical and atomic force microscopic observations revealed that fibrils which formed bundles in the fibre-like and spherulite-like aggregates, were formed in the composite. The alignment of the liquid crystal molecules was related to the aggregation structure of the self-assembling oil gelator in a liquid crystal gel state.     

Synthesis of Three‐dimensionally Ordered Macroporous TiO2 and TiO2/WO3 Composites and Their Photocatalytic Performance

This work presents the characterization and preparation of three‐dimensionally ordered macroporous TiO₂ and TiO₂/WO₃ composite nanoparticles with enhanced visible‐light‐responsive properties for rhodamine B (Rh B) photodegradation. The 3DOM TiO₂ and TiO₂/WO₃ composites were prepared through a dip‐infiltrating sol‐gel process using a polystyrene (PS) colloidal crystal template. The materials were characterized by SEM, TEM, XRD, BET, XPS and UV/Vis. The 3DOM TiO₂/WO₃ composite structures ranged from well‐defined 3DOM structures, which are highly ordered and interconnected via small pore windows, to collapsed three‐dimensional structures as the WO₃ content increased. The photoresponse range and specific surface area of the composite increased with less than 0.025 g of WCl₆. The 3DOM TiO₂/WO₃ composite with less than 0.025 g of WCl₆ exhibited a higher catalytic activity than 3DOM TiO₂ for the photocatalytic degradation of Rh B under simulated sunlight illumination.     

Aryl–Phenyl Scrambling in Intermediate Organopalladium Complexes: A Gas‐Phase Study of the Mizoroki–Heck Reaction

The intramolecular aryl–phenyl scrambling reaction within palladium–DPPP–aryl complex (DPPP=1,3‐bis(diphenylphosphino)propane) ions was analyzed by state‐of‐the‐art tandem MS, including gas‐phase ion/molecule reactions. The Mizoroki–Heck cross‐coupling reaction was performed in the gas phase, and the intrinsic reactivity of important intermediates could be examined. Moreover, linear free‐energy correlations were applied, and a mechanism for the scrambling reaction proceeding via phosphonium cations was assumed.     

Unexpected effect of light on colloidal crystal spacing

Colloidal crystals were formed from microsphere suspensions via a simple and novel approach using gel beads. The microspheres self-assembled not only around each bead but also between beads in an ordered pattern. The crystals shrunk under incident light, with the effect of blue (wavelength 450 to 500 nm) being the most profound. The results shed new light on the fundamental issue of self-assembly and colloid science.     

Surfactant-encapsulated polyoxometalloeuropate: polarized Eu3+ emission in the highly ordered self-organizing film

An organic/inorganic composite, (DODA)(9)EuW(10)O(36).9H(2)O, can form a highly ordered self-organizing film with a layered structure and almost fully interdigitated alkyl chains at solid supports. EuW10O36(9-) is deduced to be oriented in its self-organizing film, resulting in its polarized emission, which offers an accessible approach to fabricating the functional thin films containing polyoxometalates.     

Properties of composite proton-conducting membranes prepared from three-dimensionally ordered macroporous polyimide matrix and polyelectrolyte

A new proton-conducting composite membrane has been prepared by use of a three-dimensionally ordered macroporous matrix of polyimide and a proton-conducting gel polymer; the resulting composite membrane exhibited very high conductivity of 1.7 x 10-1 S cm-1 at 60 degrees C under 90% relative humidity.     

Remodeling of ordered membrane domains by GPI-anchored intestinal alkaline phosphatase

Glycosylphosphatidyl-inositol (GPI)-anchored proteins preferentially localize in the most ordered regions of the cell plasma membrane. Acyl and alkyl chain composition of GPI anchors influence the association with the ordered domains. This suggests that, conversely, changes in the fluid and in the ordered domains lipid composition affect the interaction of GPI-anchored proteins with membrane microdomains. Validity of this hypothesis was examined by investigating the spontaneous insertion of the GPI-anchored intestinal alkaline phophatase (BIAP) into the solid (gel) phase domains of preformed supported membranes made of dioleoylphosphatidylcholine/dipalmitoylphosphatidylcholine (DOPC/DPPC), DOPC/sphingomyelin (DOPC/SM), and palmitoyloleoylphosphatidylcholine/SM (POPC/SM). Atomic force microscopy (AFM) showed that BIAP inserted in the gel phases of the three mixtures. However, changes in the lipid composition of membranes had a marked effect on the protein containing bilayer topography. Moreover, BIAP insertion was associated with a net transfer of phospholipids from the fluid to the gel (DOPC/DPPC) or from the gel to the fluid (POPC/SM) phases. For DOPC/SM bilayers, transfer of lipids was dependent on the homogeneity of the gel SM phase. The data strongly suggest that BIAP interacts with the most ordered lipid species present in the gel phases of phase-separated membranes. They also suggest that GPI-anchored proteins might contribute to the selection of their own microdomain environment.     

Pore-filling Three-dimensionally Ordered Macroporous Polyimide Composite Proton Conducting Membranes

The silica opal templates were prepared from three silica colloids of different diameters of 230 nm, 500 nm and 1.5 mm by a filtration route. The large-scale stable opal template membranes after sintering the deposited SiO2 opal template can be successfully obtained by optimizing the pH value and NaCl concentration in silica colloidal solutions. The three-dimensionally ordered macroporous(3DOM) polyimide membranes without crack were fabricated by reproducing the structure of silica opal template. We prepared the pore-filling composite proton exchange membranes by filling the 3DOM structure with proton conducting organosilane sol. The result indicates that the composite membranes exhibit higher water uptake than pure filling organosilane gel. The proton conductivity increased with the increasing of pore cell in composite membranes.     

Selective Hydrogenation of Avermectin Catalyzed by Iridium-Phosphine Complexes

A series of new iridium complexes, IrCl（COD）（TMOPP） （1） [COD=1,5-cyclooctadiene, TMOPP=tris（4- methoxyphenyl）phosphine], IrCl（COD）（TFMPP） （2） [TFMPP = tris（4-trifluoromethylphenyl）phosphine], IrCl（COD）（BDNA） （3） [BDNA= 1,8-bis（diphenylphosphinomethyl）naphthalene], IrCl（COD）（BISBI） （4） [BISBI= 2,2＇-bis（diphenylphosphinomethyl）biphenyl] and IrCl（COD）（BDPB） （5） [BDPB= 1,2-bis（diphenylphosphinomethyl）benzene], were synthesized and characterized by NMR spectra and elemental analyses. In order to obtain the relationships between complex structures and their catalytic properties, IrCl（COD）（DPPM） （6） [DPPM = bis（diphenylphosphino）methane], IrCl（COD）（DPPE） （7） [DPPE= 1,2-bis（diphenylphosphino）ethane], IrCl（COD）（DPPP） （8） [DPPP=1,3-bis（diphenylphosphino）propane] and IrCl（COD）（TPP） （9） [TPP=triphenylphosphine], were also synthesized according to the reported methods. The hydrogenation results showed that the low electronic density at the central metal was favorable to increase the catalytic activity for the hydrogenation of avermectin, but decrease the selectivity to ivermectin. The complex with a large chelating ring and a bulky chelating backbone would easily cause the cleavage of C-O bond in avermectin to give a byproduct avermectin aglycon.     

Morphology control of liquid crystalline composite gels based on molecular self-assembling kinetics

Liquid crystalline composite gels consisting of a low molecular mass gelator and a low molecular mass liquid crystal were prepared by two types of gelation method (continuous cooling and isothermal gelating), which provide different molecular self-assembling kinetics of the low molecular mass gelator as gelation proceeds. Optical microscopy and atomic force microscopy revealed that numerous fine strands of the one-dimensionally assembled low molecular mass gelators were formed in the composite gels for both the continuous cooling method and the isothermal gelating method. However, the thinner strands were more homogeneously dispersed in the isothermal gelation product at an appropriate temperature, than in the continuous cooling process. This difference in dispersion state of the strands was shown (by polarizing optical microscopy) to have a significant influence on the molecular alignment of the low molecular mass liquid crystal in the liquid crystalline composite gel. The electro-optical response and light scattering-transmitting switching, of the liquid crystalline composite gel in an applied electric field was extremely dependent on the morphology of the gelators. High contrast light switching was achieved for the composite prepared by isothermal gelation. The response time of electro-optical switching was less than 100 µs under 30 V_rms.     

Morphology control of liquid crystalline composite gels based on molecular self-assembling kinetics

Liquid crystalline composite gels consisting of a low molecular mass gelator and a low molecular mass liquid crystal were prepared by two types of gelation method (continuous cooling and isothermal gelating), which provide different molecular self-assembling kinetics of the low molecular mass gelator as gelation proceeds. Optical microscopy and atomic force microscopy revealed that numerous fine strands of the one-dimensionally assembled low molecular mass gelators were formed in the composite gels for both the continuous cooling method and the isothermal gelating method. However, the thinner strands were more homogeneously dispersed in the isothermal gelation product at an appropriate temperature, than in the continuous cooling process. This difference in dispersion state of the strands was shown (by polarizing optical microscopy) to have a significant influence on the molecular alignment of the low molecular mass liquid crystal in the liquid crystalline composite gel. The electro-optical response and light scattering–transmitting switching, of the liquid crystalline composite gel in an applied electric field was extremely dependent on the morphology of the gelators. High contrast light switching was achieved for the composite prepared by isothermal gelation. The response time of electro-optical switching was less than 100?µs under 30?V_rms.     

ECEC/AA液晶溶液取向态织构及其自由基聚合

利用光学显微镜和小角光散射等方法研究了乙基氰乙基纤维素(ECEC)/丙烯酸(AA)取向液晶态织构。在切应力作用下ECEC/AA液晶溶液形成带状结构,其中大分子链沿切应力方向呈锯齿形取向,溶液浓度越高,取向液晶溶液中大分子链有序性越高,带状织构中的条带愈窄。通过紫外光引发聚合方式获得了保持取向液晶态中带状织构的复合物膜。     

Preparation and characterization of three-dimensionally ordered macroporous yttria-stabilized zirconia by aqueous organic gel route

Three-dimensionally ordered macroporous (3-DOM) yttria-stabilized zirconia (YSZ) was prepared by aqueous organic gel method through the interstitial spaces between polystyrene spheres assembled on glass substrates. The morphologies and pore size of the porous YSZ were characterized by scanning electron microscope (SEM) and nitrogen adsorption. The thermal behavior, the phase and chemical composition of PS/YSZ composite were investigated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results show that porous YSZ has been formed with the pores arranged in an ordered close-packed three-dimensional structure. Ni/YSZ cermet was also prepared by immersing the 3-DOM YSZ into the solution of nickel nitrate and urea. The electrical conductivity of Ni/YSZ was about 400 S cm⁻¹ between 600 and 800 °C.