Insertions of silylated carbenoids into vinylzirconocene chlorides. A convergent route to silyl-substituted allylzirconium reagents

A convergent route to allylzirconocene reagents by insertion of silyl-substituted carbenoids LiCR(SiMe₃)(Cl) into vinylzirconocene chlorides is reported. The product silylated allylzirconocenes react with aldehydes and ketones with high anti-selectivity to afford vinyl- (R=H) or allyl- (R=Me, Pr) silanes which may be converted into 4,5-trans-disubstitituted γ-lactones and stereodefined dienes.     

CoBr2(Bpy): an efficient catalyst for the direct conjugate addition of aryl halides or triflates onto activated olefins

An efficient cobalt-catalyzed method devoted to the direct conjugate addition of functionalized aryl compounds onto Michael acceptors is described. The CoBr2(2,2'-bipyridine) complex appears to be an extremely suitable catalyst for the activation of a variety of aromatic reagents ranging from halides to triflates functionalized by reactive groups. This procedure allows for the synthesis of compounds resulting from 1,4-addition in good to excellent yields. The versatility of this original process represents a simple alternative to most known methods using organometallic reagents.     

CuCl-catalyzed stereoselective conjugate addition of Grignard reagents to 2,3-allenoates

CuCl was found to be an efficient catalyst for the conjugate addition of 2,3-allenoates with Grignard reagents to synthesize poly-substituted β,γ-unsaturated alkenoates with high stereoselectivity in good to excellent yields. Primary, secondary, and tertiary alkyl, vinyl or phenyl Grignard reagents may all be used.     

Rhodium Fluoroapatite Catalyzed Conjugate Addition of Arylboronic Acids to α,β‐Unsaturated Carbonyl Compounds

Rhodium fluoroapatite (RhFAP) is an efficient catalyst for conjugate addition of organoboron reagents to α,β‐unsaturated carbonyl compounds. A variety of arylboronic acids and α,β‐unsaturated carbonyl compounds were converted to the corresponding conjugate‐addition products, demonstrating the versatility of the reaction. The reaction is highly selective. RhFAP was recovered quantitatively by simple filtration, and reused for four cycles.     

Formation of quaternary stereogenic centers by NHC-Cu-catalyzed asymmetric conjugate addition reactions with Grignard reagents on polyconjugated cyclic enones

The copper-catalyzed conjugate addition of various Grignard reagents to polyconjugated enones (dienone and enynone derivatives) is reported. The catalyst system, composed of copper triflate and an NHC ligand, led to the unusual selective formation of the 1,4-addition products. This reaction allows for the creation of all-carbon chiral quaternary centers with enantiomeric excesses up to 99%. The remaining unsaturation on the 1,4 adducts give access to valuable synthetic transformations.     

Highly enantioselective and regioselective copper-catalyzed 1,4 addition of grignard reagents to cyclic enynones

In this letter we describe an unusual result in terms of regioselectivity with respect to copper-catalyzed conjugate additions of various Grignard reagents to cyclic enynones. The use of Cu(OTf)(2) and NHC ligand L1 as the catalyst combination in CH(2)Cl(2) led to the unique formation of the 1,4 adduct. This selectivity does not follow the general trend previously observed in the literature using extended Michael acceptors. Moreover these reactions allowed for the creation of a quarternary stereogenic center with enantioselectivities up to 97% ee.     

Formation of Quaternary Stereogenic Centers by NHC–Cu‐Catalyzed Asymmetric Conjugate Addition Reactions with Grignard Reagents on Polyconjugated Cyclic Enones

The copper‐catalyzed conjugate addition of various Grignard reagents to polyconjugated enones (dienone and enynone derivatives) is reported. The catalyst system, composed of copper triflate and an NHC ligand, led to the unusual selective formation of the 1,4‐addition products. This reaction allows for the creation of all‐carbon chiral quaternary centers with enantiomeric excesses up to 99 %. The remaining unsaturation on the 1,4 adducts give access to valuable synthetic transformations.     

Rhodium-catalyzed conjugate addition of arylindium reagents to α,β-unsaturated carbonyl compounds

A novel rhodium-catalyzed conjugate addition of indium reagents to electron deficient olefins is reported. The reaction takes place in THF/MeOH at 110 °C using arylindium dichlorides, a rhodium(I)-binap complex as catalyst, and α,β-unsaturated ketones and lactones in good yields (45–94%). The addition of MeOH is crucial for an efficient transformation and NMR studies seem to indicate that promotes the catalytic cycle leaving the indium organometallic unaltered. The use of chiral non-racemic ligands allows performing the reaction with moderate enantioselectivities.     

Asymmetric conjugate addition to alkylidene malonates

Dialkylzinc and trialkylaluminium reagents undergo conjugate addition to alkylidene malonates with 0.5% copper triflate as catalyst. The reaction could be made enantioselective by completing the reaction in the presence of 0.5–1.0 mol% of chiral phosphorus ligand. Enantiomeric excesses (e.e.s) of up to 73% could be attained with a ligand prepared from TADDOL and 2-naphthylcyclohexanol.     

Conjugate phosphination of cyclic and acyclic acceptors using Rh(I)-phosphine or Rh(I)-carbene complexes. Probing the mechanism with chirality at the silicon atom or the phosphorus atom of the Si-P reagent

The Rh(I)-catalyzed conjugate phosphinyl transfer from an Si-P reagent to an electron-deficient acceptor requires individual protocols for cyclic and acyclic α,β-unsaturated carbonyls and carboxyls. While 1,4-addition to cyclic acceptors is catalyzed by a Rh(I)-phosphine complex, a Rh(I)-carbene complex is needed to promote conjugate phosphination of acyclic acceptors. General procedures for both systems are reported. Aside from monophosphine-derived Si-P reagents as phosphinide sources, dppe- as well as dppp-derived reagent having two Si-P units do also participate in this reaction. The mechanism of this Rh(I)-catalyzed activation of the Si-P reagent is still under debate. Control experiments with enantiopure silicon-stereogenic and racemic phosphorus-stereogenic Si-P reagents support a catalysis commencing with transmetalation rather than oxidative addition. Preparation and full characterization data of the Si-P compounds used in this investigation is included.     

Modulation of Multifunctional N,O,P Ligands for Enantioselective Copper‐Catalyzed Conjugate Addition of Diethylzinc and Trapping of the Zinc Enolate

In this work, we have successfully synthesized a new family of chiral Schiff base–phosphine ligands derived from chiral binaphthol (BINOL) and chiral primary amine. The controllable synthesis of a novel hexadentate and tetradentate N,O,P ligand that contains both axial and sp³‐central chirality from axial BINOL and sp³‐central primary amine led to the establishment of an efficient multifunctional N,O,P ligand for copper‐catalyzed conjugate addition of an organozinc reagent. In the asymmetric conjugate reaction of organozinc reagents to enones, the polymer‐like bimetallic multinuclear Cu? Zn complex constructed in situ was found to be substrate‐selective and a highly excellent catalyst for diethylzinc reagents in terms of enantioselectivity (up to >99 % ee). More importantly, the chirality matching between different chiral sources, C₂‐axial binaphthol and sp³‐central chiral phosphine, was crucial to the enantioselective induction in this reaction. The experimental results indicated that our chiral ligand (R,S,S)‐ L1 ‐ and (R,S)‐ L4 ‐based bimetallic complex catalyst system exhibited the highest catalytic performance to date in terms of enantioselectivity and conversion even in the presence of 0.005 mol % of catalyst (S/C=20 000, turnover number (TON)=17 600). We also studied the tandem silylation or acylation of enantiomerically enriched zinc enolates that formed in situ from copper‐ L4 ‐complex‐catalyzed conjugate addition, which resulted in the high‐yield synthesis of chiral silyl enol ethers and enoacetates, respectively. Furthermore, the specialized structure of the present multifunctional N,O,P ligand L1 or L4 , and the corresponding mechanistic study of the copper catalyst system were investigated by ³¹P NMR spectroscopy, circular dichroism (CD), and UV/Vis absorption.     

Copper-Catalyzed Addition of Grignard Reagents to in situ Generated Indole-Derived Vinylogous Imines

Chiral indole derivatives are ubiquitous motifs in pharmaceuticals and alkaloids. Herein, the first protocol for catalytic asymmetric conjugate addition of Grignard reagents to various sulfonyl indoles, offering a straightforward approach for the synthesis of chiral 3-sec-alkyl-substituted indoles in high yields and enantiomeric ratios is presented. This methodology makes use of a chiral catalyst based on copper phosphoramidite complexes and in situ formation of vinylogous imine intermediates.     

Highly diastereoselective conjugate additions of monoorganocopper reagents to chiral imides

Stereoselective conjugate additions to chiral N-enoyl amides employing various monoorganocuprate reagents, Li[RCuI], are described. The presence of TMSI in the addition of Li[RCuI] in THF provided the highest stereoselectivities. Reversed major diastereomeric ratios were obtained employing Li[RCuI] in ether or conventional copper-promoted Grignard reagents. The results presented support the favored anti-s-cis conformation of the substrates using Li[RCuI]/TMSI in THF, while the copper-promoted Grignard reagents or the Li[RCuI] reagents in ether favor the opposite syn-s-cis conformation. Influence of lithium ions on the stereoselective conjugate addition of the monoorganocuprate reagent, Li[BuCuI], has been investigated and two different mechanistic pathways are presented. The results show that iodotrimethylsilane (TMSI) is crucial for the asymmetric conjugate addition of the copper reagent, but only in THF or when 12-crown-4 is used. The reaction is thought not to involve any halosilane in any critical steps in the organocopper mechanisms conducted in ether. The (CuI)₄(SMe₂)₃ complex precursor plays an instrumental role for the conjugate addition using monoorganocopper reagents.     

C(2) symmetric chiral NHC ligand for asymmetric quaternary carbon constructing copper-catalyzed conjugate addition of grignard reagents to 3-substituted cyclohexenones

The asymmetric construction of quaternary carbon centers by conjugate addition of Grignard reagents to 3-methyl- and 3-ethylcyclohexenones was realized in a maximum enantioselectivity of 80% by using a C 2 symmetric chiral N-heterocyclic carbene (NHC)-copper catalyst, generated from (4 S,5 S)-1,3-bis(2-methoxyphenyl)-4,5-diphenyl-4,5-dihydro-1 H-imidazol-3-ium tetrafluoroborate and copper(II) triflate. The stereostructures of the NHC-Au complexes were analyzed by X-ray crystallography, which rationalized the good stereocontrolling ability of N-aryl NHCs.     

Conjugate addition of organocopper reagents in dichloromethane to α,β-unsaturated esters

Organocopper reagents in conjunction with Lewis acid activators provide greater stability than traditional cuprate reagents while maintaining the reactivity needed for conjugate addition reactions in dichloromethane. Whereas cuprates engage in cross-coupling pathways, organocopper nucleophiles are more selective for conjugate addition. The utility of organocopper reagents in dichloromethane for the conjugate addition to α,β-unsaturated esters is expanded upon herein.     

Copper(I) iodide dimethyl sulfide catalyzed 1,4-addition of alkenyl groups from alkenyl-alkylzincate reagents

The presence of catalytic quantities of the copper(I) iodide dimethyl sulfide complex {(CuI)₄(SMe₂)₃} with alkenyl-alkylzincate reagents allows for the complete chemoselective 1,4-addition of various alkenyl groups to a number of α,β-unsaturated carbonyl compounds in CH₂Cl₂ at +35 °C. The 1,4-addition of the mixed vinylzincate reagent is more efficient than the corresponding vinylzirconocene reagent in CH₂Cl₂ or THF. By employing CH₂Cl₂ as a medium, the asymmetric copper-catalyzed addition of the vinyl groups to α,β-unsaturated imides is facilitated by the presence of TMSOTf to give excellent yields and up to 95:5 diastereomeric ratios (dr).     

Recent topics on catalytic asymmetric 1,4-addition

Catalytic asymmetric 1,4-addition (conjugate addition; Michael addition) is one of the most powerful methods for carbon-carbon bond formation. Following the first efficient catalyst system developed by Feringa, which is composed of Cu(OTf)₂ and phosphoramidite with dialkylzincs, a variety of chiral catalysts have been reported for the catalytic asymmetric conjugate addition. In this digest review, we will first summarize novel chiral ligands that work efficiently for cyclic and acyclic enones and demonstrate the wide applicability of Michael acceptors. We will also introduce unique phenomena that include the nonlinear effect and reversal of enantioselectivity. Organomagnesium reagents have also been used instead of organozincs. Finally, we introduce the recent examples of the synthesis of natural products based on the catalytic asymmetric reaction. The rare experimental studies into the mechanism of copper-catalyzed 1,4-addition reported by Kitamura and Noyori’s group are also introduced.     

Copper‐Catalyzed Regio‐ and Enantioselective Addition of Silicon Grignard Reagents to Alkenes Activated by Azaaryl Groups

A new application of silicon Grignard reagents in C(sp³)?Si bond formation is reported. With the aid of BF₃?OEt₂, these silicon nucleophiles add across alkenes activated by various azaaryl groups under copper catalysis. An enantioselective version employing benzoxazole‐activated alkenes as substrates and a CuI‐josiphos complex as catalyst has been developed, forming the C(sp3)?Si bond with good to high enantiomeric ratios (up to 97:3). The method expands the toolbox for “conjugate addition” type C(sp³)?Si bond formation.     

Dramatic ligand effect in catalytic asymmetric reductive aldol reaction of allenic esters to ketones

A general catalytic asymmetric reductive aldol reaction of allenic esters to ketones is described. Two distinct constitutional isomers were selectively produced depending on the reaction conditions. A combination of CuOAc/(R)-DTBM-SEGPHOS/PCy3 as the catalyst predominantly produced gamma-cis-products in high yield with excellent enantioselectivity (up to 99% ee). The reaction was applicable to both aromatic and aliphatic ketones, including unsaturated ketones. On the other hand, CuF-Taniaphos complexes produced alpha-aldol products with high diastereo- and enantioselectivity (up to 84% ee). The new Taniaphos derivative L3, containing di(3,5-xylyl)phosphine and morpholine units, produced optimum results in the alpha-selective reaction. The products are versatile chiral building blocks in organic synthesis. Furthermore, the basic reaction pattern (i.e., conjugate addition-aldol reaction) was extended to a catalytic enantioselective alkylative aldol reaction to ketones using dialkylzinc reagents as the initiator.     

Highly enantioselective Cu(I)-Tol-BINAP-catalyzed asymmetric conjugate addition of Grignard reagents to α,β-unsaturated esters

The copper-catalyzed conjugate addition (CA) of organometallic reagents to α,β-unsaturated carbonyl compounds is one of the most versatile synthetic methods for the construction of C-C bonds. Interestingly, the application of Grignard reagents, which are among the most widely used of organometallic compounds, in asymmetric conjugate addition (CA) reactions has received less attention. Therefore, our group and others have been exploring better catalytic systems to effect the asymmetric 1,4-conjugate addition of Grignard reagents to α,β-unsaturated esters. It is only in the past decade that significant breakthroughs have been made in this field. In our studies, we found that CuI-Tol-BINAP could catalyze the asymmetric conjugate addition (CA) reactions of Grignard reagents, including the addition of MeMgBr to α,β-unsaturated esters to afford the β-methylated esters in good yields with excellent regio- and enantioselectivities. Both enantiomers of the products could be obtained by either using the enantiomers of the chiral Tol-BINAP or by using the geometrical isomer of the starting material. This method is also suitable for other Michael acceptors. In this article, we describe the development of the asymmetric Cu(I)-Tol-BINAP catalyzed 1,4-conjugate addition of Grignard reagents to α,β-unsaturated esters and applications of this chemistry. This method provides a convenient method to synthesize β-alkyl esters with high enantioselectivity or diastereoselectivity using CuI and the inexpensive chiral ligand, Tol-BINAP.