Magnetohydrodynamic and heat transfer effects on the stagnation-point flow of an electrically conducting nanofluid past a porous vertical shrinking/stretching sheet in the presence of variable stream conditions

A steady two-dimensional magnetohydrodynamic stagnation-point flow of an electrically conducting fluid and heat transfer with thermal radiation of a nanofluid past a shrinking and stretching sheet is investigated numerically. The model used for the nanofluid incorporates the effects of the Brownian motion and thermophoresis. A similarity transformation is used to convert the governing nonlinear boundary-layer equations into coupled higher-order nonlinear ordinary differential equations. The result shows that the velocity, temperature, and concentration profiles are significantly influenced by the Brownian motion, heat radiation, and thermophoresis particle deposition.     

Laminar boundary layer flow of a nanofluid along a wedge in the presence of suction/injection

The behavior of an incompressible laminar boundary layer flow over a wedge in a nanofluid with suction or injection has been investigated. The model used for the nanofluid integrates the effects of the Brownian motion and thermophoresis parameters. The governing partial differential equations of this problem, subjected to their boundary conditions, are solved by the Runge-Kutta-Gill technique with the shooting method for finding the skin friction and the rate of heat and mass transfer. The result are presented in the form of velocity, temperature, and volume fraction profiles for different values of the suction/injection parameter, Brownian motion parameter, thermophoresis parameter, pressure gradient parameter, Prandtl number, and Lewis number. The conclusion is drawn that these parameters significantly affect the temperature and volume fraction profiles, but their influence on the velocity profile is comparatively smaller.     

Radiative heat transfer in a hydromagnetic nanofluid past a non-linear stretching surface with convective boundary condition

Heat transfer characteristics of a two-dimensional steady hydromagnetic natural convection flow of nanofluids over a non-linear stretching sheet taking into account the effects of radiation and convective boundary condition has been investigated numerically. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. The local similarity solutions are obtained by using very robust computer algebra software Maple 13. The results corresponding to the dimensionless temperature profiles and the reduced Nusselt number, Sherwood number and skin friction coefficient are displayed graphically for various pertinent parameters. The results show that temperature within the boundary layer is enhanced with the increase of the Biot number, buoyancy due to nanoparticle concentration, strength of the applied magnetic field, Brownian motion parameter, and thermophoresis parameter. An opposite trend is observed for the increase of the buoyancy due to temperature, stretching index, and the radiation parameter. The results also show that the local rate of heat transfer strongly depends on the nonlinear stretching index, radiation parameter, Biot number, Brownian motion parameter, and thermophoresis parameter.     

The Onset of Convection in a Layer of a Porous Medium Saturated by a Nanofluid: Effects of Conductivity and Viscosity Variation and Cross-Diffusion

The linear stability theory for the Horton–Rogers–Lapwood problem is extended to the case where the porous medium is saturated by a nanofluid with thermal conductivity and viscosity dependent on the nanoparticle volume fraction. The effects of Brownian motion and thermophoresis are considered. In conjunction with the Brownian motion, the nanoparticle fraction becomes stratified, and hence the viscosity and the conductivity are stratified. The nanofluid is assumed to be dilute and this enables the porous medium to be treated as a weakly heterogeneous medium with variation, in the vertical direction, of conductivity and viscosity. In turn this allows an approximate analytical solution to be obtained.     

The onset of double-diffusive convection in a nanofluid layer

The onset of double-diffusive convection in a horizontal layer of a nanofluid is studied analytically. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. In addition the thermal energy equations include regular diffusion and cross-diffusion terms. The stability boundaries for both non-oscillatory and oscillatory cases have been approximated by simple analytical expressions. Physical significance of the obtained results is discussed.     

The onset of convection in a horizontal nanofluid layer of finite depth

This paper presents a linear stability analysis for the onset of natural convection in a horizontal nanofluid layer. The employed model incorporates the effects of Brownian motion and thermophoresis. Both monotonic and oscillatory convection for free–free, rigid–rigid, and rigid–free boundaries are investigated. The oscillatory instability is possible when nanoparticles concentrate near the bottom of the layer, so that the density gradient caused by such a bottom-heavy nanoparticle distribution competes with the density variation caused by heating from the bottom. It is established that the instability is almost purely a phenomenon due to buoyancy coupled with the conservation of nanoparticles. It is independent of the contributions of Brownian motion and thermophoresis to the thermal energy equation. Rather, the Brownian motion and thermophoresis enter to produce their effects directly into the equation expressing the conservation of nanoparticles so that the temperature and the particle density are coupled in a particular way, and that results in the thermal and concentration buoyancy effects being coupled in the same way.     

Thermal Instability in a Porous Medium Layer Saturated with a Viscoelastic Nanofluid

The onset of convection in a horizontal layer of a porous medium saturated with a viscoelastic nanofluid was studied in this article. The modified Darcy model was applied to simulate the momentum equation in porous media. An Oldroyd-B type constitutive equation was used to describe the rheological behavior of viscoelastic nanofluids. The model used for the viscoelastic nanofluid incorporates the effects of Brownian motion and thermophoresis. The onset criterion for stationary and oscillatory convection was analytically derived. The effects of the concentration Rayleigh number, Prandtl number, Lewis number, capacity ratio, relaxation, and retardation parameters on the stability of the system were investigated. Oscillatory instability is possible in both bottom- and top-heavy nanoparticle distributions. Results indicated that there is competition among the processes of thermophoresis, Brownian diffusion, and viscoelasticity that causes the convection to set in through oscillatory rather than stationary modes. Regimes of stationary and oscillatory convection for various parameters were derived and are discussed in detail.     

Effect of Local Thermal Non-equilibrium on the Onset of Convection in a Porous Medium Layer Saturated by a Nanofluid

The onset of convection in a horizontal layer of a porous medium saturated by a nanofluid is analytically studied. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. For the porous medium, the Darcy model is employed. The effect of local thermal non-equilibrium among the particle, fluid, and solid-matrix phases is investigated using a three-temperature model. The analysis reveals that in some circumstances the effect of LTNE can be significant, but for a typical dilute nanofluid (with large Lewis number and with small particle-to-fluid heat capacity ratio) the effect is small.     

Boundary-layer non-Newtonian flow over vertical plate in porous medium saturated with nanofluid

The free convective heat transfer to the power-law non-Newtonian flow from a vertical plate in a porous medium saturated with nanofluid under laminar conditions is investigated. It is considered that the non-Newtonian nanofluid obeys the mathematical model of power-law. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. The partial differential system governing the problem is transformed into an ordinary system via a usual similarity transformation. The numerical solutions of the resulting ordinary system are obtained. These solutions depend on the power-law index n, Lewis number Le, buoyancy-ratio number N _r, Brownian motion number N _b, and thermophoresis number N _t. For various values of n and Le, the effects of the influence parameters on the fluid behavior as well as the reduced Nusselt number are presented and discussed.     

Onset of Convection with Internal Heating in a Porous Medium Saturated by a Nanofluid

Linear stability analysis was applied to the onset of convection due to internal heating in a porous medium saturated by a nanofluid. A model in which the effects of thermophoresis and Brownian motion are taken into account is employed. We utilized more realistic boundary conditions than in the previous work on this subject; now the nanofluid particle fraction is allowed to adapt to the temperature profile induced by the internal heating, subject to the requirement that there is zero perturbation flux across a boundary. The results show that the presence of the nanofluid particles leads to increased instability of the system. We identified two combinations of dimensionless parameters that are the major controllers of convection instability in the layer.     

Transient natural convection flow of a nanofluid over a vertical cylinder

An analysis is performed to study unsteady free convective boundary layer flow of a nanofluid over a vertical cylinder. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. The governing equations are formulated and a numerical solution is obtained by using an explicit finite-difference scheme of the Crank-Nicolson type. The solutions at each time step have been found to reach the steady state solution properly. Numerical results for the steady-state velocity, temperature and nanoparticles volume fraction profiles as well as the axial distributions and the time histories of the skin-friction coefficient, Nusselt number and the Sherwood number are presented graphically and discussed.     

Natural Convection in a Nanofluid Saturated Rotating Porous Layer with Thermal Non-Equilibrium Model

In the present article, we study the effect of local thermal non-equilibrium on the linear and non-linear thermal instability in a nanofluid saturated rotating porous layer. The Darcy Model has been used for the porous medium, while the nanofluid layer incorporates the effect of Brownian motion along with thermophoresis. A three-temperature model is been used for the effect of local thermal non-equilibrium among the particle, fluid, and solid–matrix phases. The linear stability analysis is based on normal mode technique, while for nonlinear analysis a minimal representation of the truncated Fourier series analysis involving only two terms has been used.     

Non-linear Convective Transport in a Binary Nanofluid Saturated Porous Layer

In this article, we study double-diffusive convection in a horizontal porous medium saturated by a nanofluid, for the case when the base fluid of the nanofluid is itself a binary fluid such as salty water. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis, while the Darcy model is used for the porous medium. The thermal energy equations include the diffusion and cross-diffusion terms. The linear stability is studied using normal mode technique and for non-linear analysis, a minimal representation of the truncated Fourier series analysis involving only two terms has been used. For linear theory analysis, critical Rayleigh number has been obtained, while non-linear analysis has been done in terms of the Nusselt numbers.     

Convective Transport in a Nanofluid Saturated Porous Layer With Thermal Non Equilibrium Model

The effect of local thermal non-equilibrium on linear and non-linear thermal instability in a horizontal porous medium saturated by a nanofluid has been investigated analytically. The Brinkman Model has been used for porous medium, while nanofluid incorporates the effect of Brownian motion along with thermophoresis. A three-temperature model has been used for the effect of local thermal non-equilibrium among the particle, fluid, and solid-matrix phases. The linear stability is based on normal mode technique, while for nonlinear analysis, a minimal representation of the truncated Fourier series analysis involving only two terms has been used. The critical conditions for the onset of convection and the heat and mass transfer across the porous layer have been obtained numerically.     

Effects of Brownian Motion and Thermophoresis on the Mixed Convection of Nanofluid in a Porous Channel Including Flow Reversal

This article is devoted to combined convection heat transfer of nanofluids through a vertical channel filled with a homogeneous and isotropic porous medium. The flow is assumed to be fully developed and the “Brinkman extended Darcy” model is used for the flow in the porous media and “clear compatible” viscous dissipation model is considered. Also the model utilized for the nanofluid incorporates the effects of Brownian motion and thermophoresis. The governing momentum, energy, and nanopartices volume fraction equations are solved both analytically and numerically. The effects of the influential dimensionless parameters such as Brownian and thermophoresis parameters, mixed convection parameter (Gr/Re), Brinkman, Darcy and Lewis numbers on dimensionless velocity and temperature distributions and pressure drop are studied. Also, the results of the Nusselt number for the both left and right walls are presented and discussed.     

Free Convection Boundary Layer Flow from a Heated Upward Facing Horizontal Flat Plate Embedded in a Porous Medium Filled by a Nanofluid with Convective Boundary Condition

The steady laminar incompressible free convective flow of a nanofluid over a permeable upward facing horizontal plate located in porous medium taking into account the thermal convective boundary condition is studied numerically. The nanofluid model used involves the effect of Brownian motion and the thermophoresis. Using similarity transformations the continuity, the momentum, the energy, and the nanoparticle volume fraction equations are transformed into a set of coupled similarity equations, before being solved numerically, by an implicit finite difference numerical method. Our analysis reveals that for a true similarity solution, the convective heat transfer coefficient related with the hot fluid and the mass transfer velocity must be proportional to x ^−2/3, where x is the horizontal distance along the plate from the origin. Effects of the various parameters on the dimensionless longitudinal velocity, the temperature, the nanoparticle volume fraction, as well as on the rate of heat transfer and the rate of nanoparticle volume fraction have been presented graphically and discussed. It is found that Lewis number, the Brownian motion, and the convective heat transfer parameters increase the heat transfer rate whilst the thermophoresis decreases the heat transfer rate. It is also found that Lewis number and the convective heat transfer parameter enhance the nanoparticle volume fraction rate whilst the thermophoresis parameter decreases nanoparticle volume fraction rate. A very good agreement is found between numerical results of the present article for special case and published results. This close agreement supports the validity of our analysis and the accuracy of the numerical computations.     

Thermal Instability in a Porous Medium Layer Saturated by a Nanofluid: Brinkman Model

The onset of convection in a horizontal layer of a porous medium saturated by a nanofluid is studied analytically. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. For the porous medium, the Brinkman model is employed. Three cases of free–free, rigid–rigid, and rigid–free boundaries are considered. The analysis reveals that for a typical nanofluid (with large Lewis number), the prime effect of the nanofluids is via a buoyancy effect coupled with the conservation of nanoparticles, whereas the contribution of nanoparticles to the thermal energy equation is a second-order effect. It is found that the critical thermal Rayleigh number can be reduced or increased by a substantial amount, depending on whether the basic nanoparticle distribution is top-heavy or bottom-heavy, by the presence of the nanoparticles. Oscillatory instability is possible in the case of a bottom-heavy nanoparticle distribution.     

The onset of convection in a nanofluid saturated porous layer using Darcy model with cross diffusion

Linear and nonlinear stability analysis for the onset of convection in a horizontal layer of a porous medium saturated by a nanofluid is studied. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. The modified Darcy equation that includes the time derivative term is used to model the momentum equation. In conjunction with the Brownian motion, the nanoparticle fraction becomes stratified, hence the viscosity and the conductivity are stratified. The nanofluid is assumed to be diluted and this enables the porous medium to be treated as a weakly heterogeneous medium with variation, in the vertical direction, of conductivity and viscosity. The critical Rayleigh number, wave number for stationary and oscillatory mode and frequency of oscillations are obtained analytically using linear theory and the non-linear analysis is made with minimal representation of the truncated Fourier series analysis involving only two terms. The effect of various parameters on the stationary and oscillatory convection is shown pictorially. We also study the effect of time on transient Nusselt number and Sherwood number which is found to be oscillatory when time is small. However, when time becomes very large both the transient Nusselt value and Sherwood value approaches to their steady state values.     

Peristaltic flow of a nanofluid in a non-uniform tube

The present analysis discusses the peristaltic flow of a nanofluid in a diverging tube. This is the first article on the peristaltic flow in nanofluids. The governing equations for nanofluid are modelled in cylindrical coordinates system. The flow is investigated in a wave frame of reference moving with velocity of the wave c. Temperature and nanoparticle equations are coupled so Homotopy perturbation method is used to calculate the solutions of temperature and nanoparticle equations, while exact solutions have been calculated for velocity profile and pressure gradient. The solution depends on Brownian motion number N _b , thermophoresis number N _t , local temperature Grashof number B _r and local nanoparticle Grashof number G _r . The effects of various emerging parameters are investigated for five different peristaltic waves. It is observed that the pressure rise decreases with the increase in thermophoresis number N _t . Increase in the Brownian motion parameter N _b and the thermophoresis parameter N _t temperature profile increases. Streamlines have been plotted at the end of the article.     

Analysis of periodic and aperiodic convective stability of double diffusive nanofluid convection in rotating porous layer

The onset of periodic and aperiodic convection in a binary nanofluid saturated rotating porous layer is studied considering constant flux boundary conditions. The porous medium obeys Darcy’s law, while the nanofluid envisages the effects of the Brownian motion and thermophoresis. The Rayleigh numbers for stationary and oscillatory convection are obtained in terms of various non-dimensional parameters. The effect of the involved physical parameters on the aperiodic convection is studied graphically. The results are validated in comparison with the published literature in limiting cases of the present study.