Straight and thin ZnO nanorods: hectogram-scale synthesis at low temperature and cathodoluminescence

A novel seed-assisted chemical reaction at 95 degrees C has been employed to synthesize uniform, straight, thin, and single-crystalline ZnO nanorods on a hectogram scale. The molar ratio of ZnO seed and zinc source plays a critical role in the preparation of thin ZnO nanorods. At a low molar ratio of ZnO seed and zinc source, javelin-like ZnO nanorods consisting of thin ZnO nanorods with a diameter of 100 nm and thick ZnO nanorods with a diameter of 200 nm have been obtained. In contrast, straight ZnO nanorods with a diameter of about 20 nm have been prepared. Dispersants such as poly(vinyl alcohol) act spatial obstructors to control the length of ZnO nanorods. The morphology, structure, and optical property of the ZnO nanostructures prepared under different conditions have been characterized by transmission electron microscopy, field emission scanning electron microscopy, X-ray powder diffraction, high-resolution transmission electron microscopy, and cathodoluminescence. The formation mechanisms for the synthesized nanostructures with different morphologies have been phenomenologically presented.     

Low-temperature polymer-assisted synthesis of shape-tunable zinc oxide nanostructures dispersible in both aqueous and non-aqueous media

We report the shape-controlled synthesis of zinc oxide (ZnO) nanostructures by a poly(vinyl methyl ether) (PVME)-assisted alkaline hydrolysis of zinc acetate at low temperature (20 °C). In this method, ZnO nanostructures of various morphologies including dumbbells, lances and triangles have been successfully prepared via a simple variation of different reaction parameters such as polymer concentration, pH of the reaction mixture and precursor concentration. However, without PVME, ZnO of such structurally uniform morphologies were not formed; rather ZnO of a mixture of defined and undefined morphologies were obtained indicating PVME-assisted the growth of such regular shaped ZnO nanostructures. HRTEM analysis of lance- and triangle-shaped samples as well as SAED patterns of all kinds of samples (dumbbell, lance and triangle) revealed that the ZnO nanostrcutures are single crystalline in nature and might form through oriented growth. XRD analysis also revealed the formation of well crystalline ZnO with a hexagonal structure. FTIR spectroscopy and TGA analysis confirmed the adsorption of PVME on the surface of ZnO nanostructures. Being a solvent adaptable polymer, the adsorbed PVME makes these shaped ZnO nanostructures highly dispersible in both polar and non-polar organic solvents including water. The extent of dispersibility in different solvents was studied by spectroscopic and microscopic techniques. Such solvent adoptability of PVME-coated ZnO nanostructures increases its ease of applications in device fabrication as well as in biological systems.     

Controlled reduction of the deleterious effects of photocatalytic activity of ZnO nanoparticles by PVA capping

Nanoparticles of uncapped and PVA (poly vinyl alcohol) capped zinc oxide were synthesized by precipitation method. The synthesized ZnO nanoparticles were characterized by fourier transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and thermogravimetric-differential thermal analysis. The photocatalytic activity of bare and modified ZnO nanoparticles was studied by monitoring the degradation of Rhodamine B. The results show that PVA capped ZnO nanoparticles has reduced photocatalytic activity than the bare ZnO nanoparticles. The reduction in the chemical oxygen demand and total organic carbon results also revealed the reduced photocatalytic activity of PVA capped ZnO. The UV-shielding property was evaluated by measuring the transmittance which shows that both bare and PVA capped ZnO nanoparticles possess good UV-shielding ability.     

Photo-Oxidative Degradation of Poly(vinyl Chloride) Based Nanocomposites Under Ultraviolet Irradiation

The poly(vinyl chloride) based nanocomposites with 3.0% weight content of the photo-active zinc oxide (ZnO) nanoparticles or the photo-inert calcium carbonate (CaCO₃) nanoparticles was prepared by the solution mixing method, respectively. Their photo-oxidative degradation under ultraviolet irradiation (365 nm) at room temperature were compared with the pure poly(vinyl chloride) via Fourier transform infrared spectroscopy, Thermogravimetric analysis and x-ray photoelectron spectroscopy analyses. The results showed that the photo-inert calcium carbonate (CaCO₃) nanoparticles hampered the photo-degradation of poly(vinyl chloride), whereas the photoactive zinc oxide (ZnO) nanoparticles accelerated the photodegradation of poly(vinyl chloride). Furthermore, the ZnO nanoparticles also favored the crosslinking reaction of the dehydrochlorinated poly(vinyl chloride).     

Synthesis and optical properties of ZnO nanostructures in imidazolium-based ionic liquids

Different morphologies of ZnO nanostructures have been synthesized by a simple reflux method, in imidazolium-based ionic liquids and water as a solvent. The effects of ionic liquid as a template with different concentrations and the amount of sodium hydroxide on the morphology and size of nanostructures were investigated. The structural and optical properties of these ZnO particles were studied by using XRD, SEM and UV–Visible. The characteristic results revealed that using different ionic liquids in water not only prevent a drastic increase in the crystallite size of the zinc oxide species but also provide suitable conditions for the oriented growth of primary nanoparticles with nano sheet and nano hallow block. The results show that the longer alkyl chain at position-1 of imidazole ring or using dicationic ionic liquid with a definite concentration cause the more width of nano sheet. A possible mechanism was proposed to explain the formation of ZnO nanostructures with different morphology.     

Sonochemical Synthesis of Spherical Silica Nanoparticles and Polymeric Nanocomposites

In this work spherical SiO₂ nanoparticles were synthesized by sonochemical method using a new Schiff-base as a capping agent. The silica nanoparticles were obtained by hydrolysis of tetraethyl orthosilicate in aqueous alcohol solution. The effect of different parameters such as molar concentration of Schiff-base ligands and ultrasonic irradiation on the morphology and size of the products was examined. The results demonstrated that applying the appropriate amount of Schiff-base could be effective in control of particle size. The influence of SiO₂ nanostructures on the flame retardancy of the poly styrene, poly vinyl alcohol, cellulose acetate and ethyl cellulose was studied. In-situ and ex situ nanocomposites were investigated and results confirm that flame retardancy of in situ nanocomposites were better than ex situ samples. HO···Si–O–Si···OH barrier prevents reaching of flame, heat and oxygen to the polymeric nanocomposites.     

Solvent-Free Synthesis of ZnO Nanoparticles by a Simple Thermal Decomposition Method

This paper reports on a novel processing route for producing ZnO nanoparticles by solid-state thermal decomposition of zinc(II) acetate nanostructures obtained by the sublimation of zinc(II) acetate powder. The sublimation process of the Zn(OAc)₂ powder was carried out in the temperature 150 °C for 2 h. In addition, nanoparticles of ZnO were obtained by solid-state thermal decomposition of the synthesized Zn(OAc)₂ nanostructures. The synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, photoluminescence spectroscopy, and energy dispersive X-ray spectroscopy. The sublimation process of the Zn(OAc)₂ powder was carried out within the range of 150–180 °C. The XRD studies indicated the production of pure hexagonal ZnO nanoparticles after thermal decomposition.     

Synthesis and Characterization of Zinc Oxide Nano-particles by Solid State Chemical Reaction Method

Several important synthetic parameters such as precursor concentration, reaction time are found to determine the growth of ZnO nanostructures. These reaction parameters can be tuned to produce a variety size of nanostructures. In this work we show the importance of these parameters on the size of synthesized zinc oxide nano-powders. ZnO nanoparticles are synthesized by the solid-state reaction using ZnSO₄·7H₂O and NaOH as the reagents. In this method Zn(OH)₂ is the intermediate product of the reaction, we show that by adjusting the molar ratio of the reagents and grinding time, we can be removed this unwanted component in the final product so for obtaining pure ZnO nanostructures the calcinations process is not necessary, also we can tune the size of ZnO nanoparticles. XRD spectra of the nanoparticles demonstrate typical diffraction peaks of a well-crystalline Wurtzite ZnO structure transmission electron microscopic observations show that these nanoparticles are of hexagonal phase ZnO mostly in round shapes and he composition analysis by EDX indicate that final product is pure ZnO. In the optimum conditions by XRD analysis we see that the mean grain size of synthesized zinc oxide nano-particles is about 44 nm.     

Polymeric Matrix Nanocomposites: Influence of Cadmium Sulfide Nanostructure on the Thermal Degradation of Poly(Vinyl Alcohol) and Cellulose Acetate

In this work cadmium sulfide-thioglycolic acid (CdS-Organic) nanostructures were added to the poly(vinyl alcohol) and cellulose acetate polymeric matrixes. The influence of CdS-Organic (CdS-Org) content on the thermal degradation of polymeric matrixes was studied using thermogravimetric analysis. Thermal decomposition of the nanocomposites shifted towards higher temperature in the presence of the CdS-Org nanostructures. Nanostructures were characterized by scanning electron microscopy, atomic force microscopy, Ultraviolet–Visible and Fourier transform infrared spectroscopy.     

微波诱导燃烧法合成类花状ZnO纳米材料及其晶体结构、荧光性质研究

以硝酸锌[Zn(NO3)2.6H2O]和尿素[CO(NH2)2]作前驱体,通过微波诱导燃烧技术可控合成具有不同形貌的ZnO纳米晶体,并用热重分析和差热分析进行了研究。对各种生长条件:微波功率,辐射时间和尿素/Zn2+物质的量的比对ZnO纳米晶体形貌的影响作了分析。结果表明:尿素/Zn2+物质的量的比对ZnO纳米材料的形貌具有显著影响。X衍射图表明合成的ZnO纳米结构呈六角形。傅里叶变换红外光谱图中400~500 cm-1处明显的峰为Zn-O的振动峰。ZnO纳米结构的发光光谱在366 nm的带边发射,因缺陷又由许多可见光发射峰组成。用扫描电子显微镜、透射电子显微镜、选区电子衍射研究了花状ZnO纳米结构的增长机理。本方法仅需几分钟就获得的了ZnO纳米结构。     

海藻酸锌纤维热降解法制备氧化锌纳米结构

采用天然高分子海藻酸钠为原料, 以氯化锌水溶液为凝固浴, 通过湿法纺丝技术成功制备了海藻酸锌(Alg-Zn)纤维.通过在空气中不同温度下对所得海藻酸锌纤维进行热处理, 得到了多种ZnO纳米结构. 利用热失重分析(TG)、X射线衍射(XRD)、电子能量损失谱(EELS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)等手段对产物的组成、形貌和微观结构进行了详细表征. 结果表明, 焙烧温度和时间对所得ZnO纳米结构的尺寸和形貌具有重要影响; 800 ℃下热处理24 h以上可以得到直径约为120 nm的ZnO纳米棒. 通过仔细考察不同热处理时间得到的ZnO纳米结构, 提出了在焙烧条件下ZnO纳米棒的生长机理.     

Fine-tuning the synthesis of ZnO nanostructures by an alcohol thermal process

A simple and efficient alcohol thermal technique was applied to control the growth of the dimensions and morphology of ZnO nanostructures under mild conditions, where surfactant was not necessary. The size of ZnO nanocrystals increased with growth temperature and they transformed into nanorods with different aspect ratios through tuning the reaction time. The length of nanorods increased significantly with the reaction time, but their thickness only slightly increased. The as-prepared ZnO nanocrystals were monocrystalline and the growth orientation of ZnO nanorods was [001]. Photoluminescence measurements showed a blue shift in violet emission with a reduction in crystal size and revealed the quantum confinement effect. Electron irradiation induced structural damage was observed in the ZnO nanorods synthesized at 120 degrees C. Experimental results proved that the possible growth mechanism of ZnO nanostructures was oriented attachment.     

Synthesis of poly(vinyl alcohol)-based poly(crown ether)s and permeability of their polymeric membranes

Polymers that contain crown ether moieties at the side chain and are capable of forming rather tough film were synthesized by the polymer reaction of poly(vinyl alcohol) with formyl derivatives of aliphatic crown ethers such as 12-crown-4, 15-crown-5, and 18-crown-6. In the passive transport of alkali metal picrates across the poly(crown ether) membranes the permeation, particularly of alkali metals which tend to form intramolecular sandwich-type complexes with the crown ether rings, was retarded, compared with a poly(vinyl alcohol) membrane. The cation selectivities in the permeation of poly(crown ether) membranes differed significantly from those of poly(vinyl alcohol).     

The effect of polymers onto the size of zinc layered hydroxide salt and its calcined product

Zinc hydroxide nitrate, a brucite-like layered material was synthesized using pH control method. Poly(vinyl alcohol) and poly(ethylene glycol) were used at various percentages as size decreasing agents during the synthesis of zinc hydroxide nitrate. SEM and PXRD showed the decrease of size and thickness of the resultant zinc hydroxide nitrates. TG and surface area data confirmed the decrease of the particle sizes, too. When zinc hydroxide nitrates were heat treated at 500 °C, the physical properties of nano zinc oxides obtained depended on the parent material, zinc hydroxide nitrate.     

IMMOBILIZED CIBACRON BLUE F3G-A ON CROSSLINKED POLY (VINYL ALCOHOL) FOR AFFINITY CHROMATOGRAPHY

Immobilized triazine dye affinity chromatography has been widely used for protein purification. In this paper, cibacron Blue F3G-A was immobilized,through a spacer arm, onto a rigid hydrophilic porous polymer by reacting an epoxy-group-containing poly(vinyl alcohol) with 6-aminohexyl-N'-Cibacron Blue F3G-A,which was obtained by reacting Cibacron Blue F3G-A with excess of 1,6-diaminohexane, in a pH 8.6 buffer. The epoxy-group-containing poly(vinyl alcohol) was prepared by hydrolysis of macroporous crosslinded poly(vinyl acetate),which was synthesized by suspension copolymerization of vinyl acetate and triallyl isocyanurate in the presence of butyl acetate and n-heptane as diluents. The cibacron Blue F3G-A-immobilized poly(vinyl alcohol)was packed in a stainless steel column (250×5 mm I. D.) and the chromatographic behaviors of several proteins (cytochrome c, lysozyme, bovine serum albumin, insulin, and lactate dehydrogenase) were determined.     

PVA-Based Sol–Gel Synthesis and Characterization of CdO–ZnO Nanocomposite

CdO–ZnO nanocomposite was fabricated by a sol–gel pyrrolysis method based on the poly vinyl alcohol (PVA) polymeric network. The prepared nanocomposite was carefully characterized using scanning electron microscopy, X-Ray dispersive energy analysis, ICP-atomic emission spectroscopy, X-Ray diffraction, transmission electron microscopy and UV–visible spectroscopy. The structure, composition, and morphology of this composite depend on a number of aspects: the amounts of cadmium salt, zinc salt, and PVA in the initial solution, the solvent composition, and the pyrrolysis temperature. The obtained results showed that the nanocomposite had excellent linear nanoclusters created from nanograins. Each nanograin was made of a CdO core, completely covered by ZnO layers. Total diameter of each nanograin was 70–90 nm.     

Preparation and characterization of poly(vinyl alcohol)/organo-modified cloisite Na+ with chiral L-leucine amino acid/TiO2 nanocomposites

Poly(vinyl alcohol)/organo-clay/TiO₂ nanocamposites films were prepared with 10 wt % of organo-nanoclay and various amount of TiO₂ nanoparticles. Cloisite Na⁺ has been modified via cation exchange reaction using ammonium salt of natural L-leucine amino acid as a cationic surfactant. After that poly(vinyl alcohol)/organo-nanoclay/TiO₂ nanocomposites were synthesized by dispersion of TiO₂ on the surfaces of organo-nanoclay in poly(vinyl alcohol) matrix by using ultrasonic energy. Three nanocomposites with different loading of TiO₂ were prepared and characterized by X-ray diffraction, fourier transform infrared spectroscopy, field emission type scanning electron microscope, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis and ultraviolet-visible transmission spectra. The results showed that the organo-nanoclay and TiO₂ were dispersed homogeneously in poly(vinyl alcohol) matrix and also showed improvement in their thermal properties compared with the pure poly(vinyl alcohol).     

聚甲基乙烯基酮的不对称还原反应

聚甲基乙烯基酮的不对称还原反应李弘姚金水何炳林（吸附与分离功能高分子材料国家重点实验室南开大学高分子化学研究所天津３０００７１）关键词对称硅氢化，聚甲基乙烯基酮，手性噻唑烷，铑近年来手性过渡金属络合物催化的前手性酮和烯的不对称硅氢化反应已在国际上受...     

One-dimensional ZnO nanostructure arrays: synthesis and characterization

One-dimensional ZnO nanostructure arrays such as nanowires, nanonails, and nanotrees, have been synthesized by oxygen assisted thermal evaporation of metallic zinc on a quartz substrate over a large area. Morphological evolution of ZnO nanostructures at different time scales and different positions of the substrates have been studied by electron microscopy. A self-catalyzed vapor-liquid-solid (VLS) process is believed to be responsible for the nucleation and subsequently a vapor-solid process is operative for further longitudinal growth. The photoluminescence spectrum showed a weak UV and a broad green emission peak at 3.25 and 2.49 eV, respectively. The latter was attributed to the presence of zinc interstitial defects. Electrical resistivity as a function of temperature showed activated mechanisms to be present. The electrical response of the ZnO nanonail arrays to different gases (CO, NO2, and H2S) indicated that there could be possible application as gas sensors for this material.     

Morphology‐Dependent Gas‐Sensing Properties of ZnO Nanostructures for Chlorophenol

The crystal‐plane effect of ZnO nanostructures on the toxic 2‐chlorophenol gas‐sensing properties was examined. Three kinds of single‐crystalline ZnO nanostructures including nanoawls, nanorods, and nanodisks were synthesized by using different capping agents via simple hydrothermal routes. Different crystal surfaces were expected for these ZnO nanostructures. The sensing tests results showed that ZnO nanodisks exhibited the greatest sensitivity for the detection of toxic 2‐chlorophenol. The results revealed that the sensitivity of these ZnO samples was heavily dependent on their exposed surfaces. The polar (0001) planes were most reactive and could be considered as the critical factor for the gas‐sensing performance. In addition, calculations using density functional theory were employed to simulate the gas‐sensing reaction involving surface reconstruction and charge transfer both of which result in the change of electronic conductance of ZnO.