Reaction between carbon dioxide and elementary fluorine

Reactions between carbon dioxide and fluorine were examined at temperatures of 303-523 K under various pressure and mixture ratios of both gases. Reactions were carried out similarly under the existence of NaF, CsF and EuF₃.After the reaction, fluorine was removed and the reaction products were analyzed using FT-IR, GC/FT-IR and GC/MS. The major products were CF₃OF, COF₂, CF₄ and CF₂(OF)₂.The best yield of COF₂ was 11.1% under the reaction condition of CO₂/F₂ = 76 kPa/76 kPa with temperature of 498 K for 72 h in a direct reaction. The formation rate of COF₂ in the direct reaction was estimated as 0.232 dm³ mol⁻¹ h⁻¹ under the reaction conditions of CO₂/F₂ = 76 kPa/76 kPa, at 498 K. In the presence of CsF, it was estimated as 1.88 dm³ mol⁻¹ h⁻¹ at CO₂/F₂ = 76 kPa/76 kPa at 498 K.The activation energy of the COF₂ formation in the direct reaction was estimated as 45.7 kJ mol⁻¹ at CO₂/F₂ = 76 kPa/76 kPa at 498 K. In addition, 24.2 and 38.9 kJ mol⁻¹ were evaluated at CO₂/F₂ = 76 kPa/76 kPa at 498 K, respectively, in the presence of CsF and EuF₃.     

[PdCl2{8-(di-tert-butylphosphinooxy)quinoline)}]: a highly efficient catalyst for Suzuki-Miyaura reaction

The complex [PdCl₂(P-N)] containing the basic and sterically demanding 8-(di-tert-butylphosphinooxy)quinoline ligand (P-N) is a highly efficient catalyst for the coupling of phenylboronic acid with aryl bromides or aryl chlorides. The influence of solvent and base has been investigated, the highest rates being observed at 110 °C in toluene with K₂CO₃ as the base. With aryl bromides the reaction rates are almost independent on the electronic properties of the para aryl substituents, on the contrary, reduced reaction rates are observed when bulky substituents are present on the substrate. Nevertheless the coupling of 2-bromo-1,3,5-trimethylbenzene with phenylboronic acid can be carried out to completion in 2 h using a catalyst loading of 0.02 mol %. Under optimized reaction conditions, turnover frequencies as high as 1900 h⁻¹ can be obtained in the coupling of 4-chloroacetophenone with phenylboronic acid; lower reaction rates are obtained with substrates bearing EDG substituents on the aryl group.     

Cross coupling of 3-bromopyridine and sulfonamides (RNHSO2R·R = H, Me, alkyl; R = alkyl and aryl) catalyzed by CuI/1,3-di(pyridin-2-yl)propane-1,3-dione

N-(3-Pyridinyl)-substituted secondary and tertiary sulfonamides have been synthesized in good to excellent yields by the reaction of 3-bromopyridine with primary and secondary alkyl and aryl sulfonamides (MeSO₂NH₂, MeSO₂NHMe, TolSO₂NH₂, TolSO₂NHMe, 1,3-propanesultam, and 1,4-butanesultam), catalyzed by CuI (20 mol %) and 1,3-di(pyridin-2-yl)propane-1,3-dione (20 mol %) with K₂CO₃ (200 mol %) in DMF (0.17 M for ArBr) at 110-120 °C over 36-40 h. 2-Bromopyridine, 4-bromopyridine, and a wide variety of substituted phenyl bromides can also be successfully coupled with sulfonamides under these reaction conditions.     

Theoretical study on the reaction mechanism of CH4 with CaO

The reaction pathways and energetics for the reaction of methane with CaO are discussed on the singlet spin state potential energy surface at the B3LYP/6-311+G(2df,2p) and QCISD/6-311++G(3df,3pd)//B3LYP/6-311+G(2df,2p) levels of theory. The reaction of methane with CaO is proposed to proceed in the following reaction pathways: CaO + CH₄ → CaOCH₄ → [TS] → CaOH + CH₃, CaO + CH₄ → OCaCH₄ → [TS] → HOCaCH₃ → CaOH + CH₃ or [TS] → CaCH₃OH → Ca + CH₃OH, and OCaCH₄ → [TS] → HCaOCH₃ → CaOCH₃ + H or [TS] → CaCH₃OH → Ca + CH₃OH. The gas-phase methane–methanol conversion by CaO is suggested to proceed via two kinds of important reaction intermediates, HOCaCH₃ and HCaOCH₃, and the reaction pathway via the hydroxy intermediate (HOCaCH₃) is energetically more favorable than the other one via the methoxy intermediate (HCaOCH₃). The hydroxy intermediate HOCaCH₃ is predicted to be the energetically most preferred configuration in the reaction of CaO + CH₄. Meanwhile, these three product channels (CaOH + CH₃, CaOCH₃ + H and Ca + CH₃OH) are expected to compete with each other, and the formation of methyl radical is the most preferable pathway energetically. On the other hand, the intermediates HCaOCH₃ and HOCaCH₃ are predicted to be the energetically preferred configuration in the reaction of Ca + CH₃OH, which is precisely the reverse reaction of methane hydroxylation.     

General method of obtaining deuterium-labeled heterocyclic compounds using neutral D2O with heterogeneous Pd/C

A protocol of a versatile H-D exchange reaction of heterocyclic compounds catalyzed by heterogeneous Pd/C in D₂O is described. The reaction of various nitrogen-containing heterocycles with 10% Pd/C (10 wt % of the substrate) under hydrogen atmosphere in D₂O as a deuterium source at 110-180 °C for 24 h afforded the corresponding deuterated compounds with satisfactory efficiency of deuteration in moderate to excellent isolated yields. Furthermore, the Pd/C-H₂-D₂O system can be extended to the direct deuteration of biologically active compounds such as sulfamethazine, which is used as a synthetic antibacterial drug for fat stocks and would be applied as a general method for the preparation of the standard materials for the analysis of residual chemicals in foods and so on.     

Rapid access to homoallylic alcohols via Pd(OAc)2 catalyzed Barbier type allylation in presence of DMAP

DMAP was found to accelerate significantly the rate of Pd(OAc)₂ catalyzed Barbier type allylation of carbonyl compounds by allylbromide using SnCl₂·2H₂O as reducing agent. Both aldehyde as well as ketones produced excellent yields within a short reaction time in the presence of 3 mol % of Pd(OAc)₂ and 12 mol % of DMAP at room temperature. Aldehydes could be allylated within 5–10 min whereas, in case of ketones, the reaction completes in 45–120 min.     

Cyclic mechanism in the trapping of carbonyl oxides with alcohols and carboxylic acids

The reaction of diphenylcarbonyl oxide with alcohols and carboxylic acids, which has been classified as a nucleophilic trapping, is shown to be in the reactivity order: AcOH ? MeOH > CF₃CH₂OH > EtOH ? t-BuOH. A laser-flash spectroscopy indicated that the reaction of carboxylic acids is very fast, that is, one-tenth of the diffusion rate. These results suggest that the hydroxyl compounds react as an acid and a nucleophile at the same time and the major reaction is via the seven- and five-membered cyclic mechanism for RCO₂H and ROH, respectively.     

Si-C coupling reaction of polychloromethanes with HSiCl3 in the presence of Bu4PCl: Convenient synthetic method for bis(chlorosilyl)methanes

Coupling reaction of polychloromethanes CH_4−nCl_n (n = 2-4) with HSiCl₃ in the presence of tetrabutylphosphonium chloride (Bu₄PCl) as a catalyst occurred at temperatures ranging from 30 °C to 150 °C. The reactivity of polychloromethanes increases as the number of chlorine-substituents on the carbon increases. In the reactions of CCl₄ with HSiCl₃, a variety of coupling products such as bis(chlorosilyl)methanes CH₂(SiCl₃)(SiXCl₂) [X = Cl (1a), H (1b)], (chlorosilyl)trichloromthanes Cl₃CSiXCl₂ [X = Cl (2a), H (2b)], and (chlorosilyl)dichloromthanes Cl₂HCSiXCl₂ [X = Cl (3a), H (3b)] were obtained along with reductive dechlorination products such as CHCl₃ and CH₂Cl₂ depending on the reaction temperature. In the reaction of CCl₄, 2a is formed at the initial stage of the coupling reaction and converted to give CHCl₃ at low temperature of 30 °C, to give 1a, 3a, and CHCl₃ at 60 °C, and to afford 1a as major product and CH₂Cl₂ in competition above 100 °C. Si-H bond containing silylmethanes can be formed by the H-Cl exchange reaction with HSiCl₃. Reaction of CHCl₃ with HSiCl₃ took placed at 80 °C to give three compounds 1a, 3a, and CH₂Cl₂, and finally 3a was converted to give 1a and CH₂Cl₂ at longer reaction time. While the condition for the reaction of CH₂Cl₂ with HSiCl₃ required a much higher temperature of 150 °C. Under the optimized conditions for synthesizing bis(chlorosilyl)methanes 1a,b, a mixture of 1a and 1b were obtained as major products in 65% (1a:1b = 64:1) and 47% (42:5) yields from the reaction of CCl₄ and CHCl₃ at 100 °C for 8 h, respectively, and in 41% (34:7) yield from that of CH₂Cl₂ at 170 °C for 12 h. In the Si-C coupling reaction of polychloromethanes with HSiCl₃, it seems likely that a trichlorosilyl anion generated from the reaction of HSiCl₃ with Bu₄PCl is an important key intermediate.     

Computational study of reaction pathways in the course of interaction of deactivated silylenes with buta-1,3-diene

The PESs of systems including deactivated silylenes (SiHHal, SiHal₂, Hal = F, Cl, and 2-silaimidazol-2-ylidene, SiN₂H₂C₂H₂) and buta-1,3-diene have been studied using G3(MP2)//B3LYP method. Two major reaction channels, (2 + 1) and (4 + 1) cycloaddition reactions, leading to 2-vinylsiliranes and silacyclopent-3-enes, respectively, as well as [1,3]-sigmatropic rearrangements between 2-vinylsiliranes and the corresponding silacyclopent-3-enes, have been considered in detail. Reactivity of silylenes toward buta-1,3-diene decreases in the following series: SiHHal > SiHal₂ > SiN₂H₂C₂H₂, which is reflected in increase of the reaction barriers for both cycloaddition reactions and in decrease of exothermicity of the formation of the corresponding products. The (4 + 1) cycloaddition is preferable for SiHal₂ and SiN₂H₂C₂H₂ and can compete with (2 + 1) cycloaddition for SiHHal. [1,3]-Sigmatropic rearrangement is important for isomerization of 2-vinylsiliranes to the corresponding silacyclopent-3-enes for all systems studied, except the SiCl₂ system.     

Ligand-free, atom-efficient Suzuki-Miyaura type cross-coupling reactions at room temperature

The atom-efficient cross-coupling reaction of sodium tetraarylborates with aryl iodides and bromides was reported. The reaction can be performed directly using a catalytic system composed of palladium chloride, sodium carbonate and methanol (PdCl₂/Na₂CO₃/MeOH) under heat-free conditions at room temperature in an open air conditions. The reactions carried out in an atom-efficient way as 4 equiv of aryl halides coupled effectively with 1 equiv of sodium tetraarylborates to furnish 4 equiv of the corresponding functionalized biaryls in good to excellent yields.     

Mild copper-catalyzed N-arylation of azaheterocycles with aryl halides

A highly efficient copper(I)-catalyzed N-arylation of azaheterocycles with various aryl halides is reported. The N-arylation reaction can be carried out using as low as 0.5 mol % of (Cu(I)OTf)₂·PhH and 1.0 mol % of 4,7-dichloro-1,10-phenanthroline as the ligand. Furthermore, cheap and stable copper precursors like Cu(I)I and Cu(II)(OAc)₂·H₂O and the cheap and mild base K₂CO₃ can be used.     

Molybdenum oxide/bipyridine hybrid material {[MoO3(bipy)][MoO3(H2O)]}n as catalyst for the oxidation of secondary amines to nitrones

The inorganic-organic hybrid material {[MoO₃(bipy)][MoO₃(H₂O)]}_n (bipy = 2,2′-bipyridine) can be used as a water-tolerant catalyst for the oxidation of secondary amines under mild conditions using either urea hydrogen peroxide (UHP) or tert-butylhydroperoxide (TBHP) as the oxidant. Under optimized reaction conditions (2 mol % catalyst, 3-4 equiv TBHP, CH₂Cl₂ as the solvent, 40 °C), the corresponding nitrones were obtained with different efficiency depending on the nature of the cyclic or acyclic amine used.     

Highly enantioselective addition of linear alkyl alkynes to linear aldehydes

It is discovered that the use of biscyclohexylamine (Cy₂NH) as an additive can greatly enhance the enantioselectivity for the reaction of linear alkyl alkynes with linear aldehydes. The combination of (S)-BINOL (20 mol %), Cy₂NH (5 mol %), ZnEt₂ (2 equiv), and Ti(OⁱPr)₄ (0.5 equiv) catalyzes the reaction at room temperature in diethyl ether solution with 81-89% ee and 57-77% yield.     

Homogeneous, unmodified gold nanoparticle-based colorimetric assay of hydrogen peroxide

An unmodified gold nanoparticle-based colorimetric assay system in homogeneous format has been developed using hydrogen peroxide (H₂O₂) as a model analyte. H₂O₂ is added to o-phenylenediamine/horseradish peroxidase solution, and allowed to react for 10 min. Then, unmodified gold nanoparticles that serve as “reaction indicators” are added to the reaction solution. The resulting mixture color changes dramatically from red to blue. The reason is that azoaniline, a horseradish peroxidase-catalyzed oxidation product, induces the nanoparticle aggregation. Using this approach, H₂O₂ can be semiquantitatively determined over the concentration range of ∼4 orders of magnitude by the naked eye. If the observed peak intensity at 420 nm is used for the construction of the calibration plot, hydrogen peroxide can be accurately determined down to concentration levels of 1.3 × 10⁻⁶ M. Compared with the conventional electrochemical protocol, this sensing system offers several important advantages: (1) ability to be monitored by the naked eye, (2) avoiding the need of surface modification of electrodes or gold nanoparticles and (3) detection in homogeneous solution. It is worthy of note that this efficient and convenient strategy is also suitable for the detection of other species, such as glucose and cholesterol.     

Flow injection chemiluminescence determination of nitrofurazone in pharmaceutical preparations and biological fluids based on oxidation by singlet oxygen generated in N-bromosuccinimide-hydrogen peroxide reaction

A simple flow injection chemiluminescence (FI-CL) method was proposed for the determination of nitrofurazone. Strong CL signal was generated during the reaction of nitrofurazone with H₂O₂ and N-bromosuccinimide (NBS) in alkaline condition. The CL signal was proportional to the nitrofurazone concentration in the range 1.0 × 10⁻⁷ to 1.0 × 10⁻⁵ g mL⁻¹. The detection limit was 2 × 10⁻⁸ g mL⁻¹ nitrofurazone and the relative standard deviation was less than 4% (6.0 × 10⁻⁶ g mL⁻¹ nitrofurazone, n = 11). The proposed method was successfully applied to the determination of nitrofurazone in compound furacillin nasal drops, human plasma and urine samples. The CL reaction mechanism was also discussed briefly. Singlet oxygen generated in the reaction between H₂O₂ and NBS was suggested to be participated in the CL reaction.     

Asymmetric Michael addition promoted by (R,R)-trans-1,2-diaminocyclohexane in ionic liquids

In tetrafluoroborate based ionic liquids fair yields and enantiomeric excesses up to 91% were obtained in the Michael addition of ethyl cyclohexanone-2-carboxylate to methyl vinyl ketone, using (R,R)-trans-1,2-diaminocyclohexane as chiral auxiliary (37% mol/mol with respect to the donor). The presence of catalytic amounts of metal sources [Ni(OAc)₂ · 4H₂O, Co(acac)₂, FeCl₃ · 6H₂O, LaCl₃, Cu(OAc)₂ · H₂O] did not improve the activity, and, in some instances, caused a drop of enantioselectivity. Reactions carried out in the absence of any metal and with a Michael donor/diamine molar ratio of 20 allowed us to ascertain that the reaction can be performed catalytically.     

The formation of Lewis acid/base stabilised phosphanyltrielanes - A theoretical and experimental study

Theoretical investigations on the thermochemistry and the reaction mechanism of the formation of Lewis acid/base stabilised phosphanyltrielanes D · H₂EPH₂ · A (D = Lewis base, A = Lewis acid) were conducted. The reactions of EH₃ · D with A · PH₃ to form D · H₂EPH₂ · A and H₂ (E = B, Al, Ga; D = NH₃; A = BH₃, Cr(CO)₅) are all exothermic, regardless of whether donors and acceptors are present or absent. The lithium chloride elimination reactions between EH₂Cl · D and A · PH₂Li to give D · H₂EPH₂ · A and LiCl are endothermic for donor/acceptor stabilised compounds, if formation of gaseous LiCl is considered. If solid lithium chloride is considered all reactions are strongly exothermic. Studies of the transition state for H₂-elimination reactions between EH₃ · D and A · PH₃ to yield D · H₂EPH₂ · A and H₂ were only successful for E = Al, Ga. In these cases the reaction proceeds via a transition state featuring a five or six-coordinate group 13 element. Different donor molecules do not influence the activation energy of such H₂-elimination reactions, but nevertheless they have an effect on the reaction energy. The synthesis of the Cr(CO)₅ substituted phosphanyltrielanes [(CO)₅Cr(H₂PBH₂ · NMe₃)] (3a) and [(CO)₅Cr(H₂PAlH₂ · NMe₃)] (3b), as well as of the dinuclear complex [(CO)₈Cr₂(μ-HPBH₂ · NMe₃)₂] (4) are described, the latter as a subsequent reaction product of the photolysis of 3a. All compounds were characterised spectroscopically and by X-ray structure analysis.     

Determination of glucose using a coupled-enzymatic reaction with new fluoride selective optical sensing polymeric film coated in microtiter plate wells

The determination of glucose in beverages is demonstrated using newly developed fluoride selective optical sensing polymeric film that contains aluminum (III) octaethylporphyrin (Al[OEP]) ionophore and the chromoionophore ETH7075 cast at the bottom of wells of a 96-well polypropylene microtiter plate. The method uses a dual enzymatic reaction involving glucose oxidase enzyme (GOD) and horseradish peroxidase (HRP), along with an organofluoro-substrate (4-fluorophenol) as the source of fluoride ions. The concentration of fluoride ions after enzymatic reaction is directly proportional to the glucose level in the sample. The method has a detection limit of 0.8 mmol L⁻¹, a linear range of 0.9-40 mmol L⁻¹ and a sensitivity of 0.125 absorbance/decade of glucose concentration. Glucose levels in several beverage samples determined using the proposed method correlate well with a reference spectrophotometric enzyme method based on detection of hydrogen peroxide using bromopyrogallol red dye (BPR). The new method can also be used to determine H₂O₂ concentrations in the 0.1-50 mmol L⁻¹ range using a single enzymatic reaction involving H₂O₂ oxidation of 4-fluorophenol catalyzed by HRP. The methodology could potentially be used to detect a wide range of substrates for which selective oxidase enzymes exist (to generate H₂O₂), with the high throughput of simple microtiter plate detection scheme.     

The DFT and ab initio investigations on the mechanism of CF3O2 + H reaction

The mechanisms for the reaction of CF₃O₂ with atomic hydrogen were studied with ab initio and DFT methods. The results reveal that the reaction could take place on the singlet and triplet potential energy surfaces (PES). For the singlet PES, addition/elimination and substitution mechanisms are determined, and the former one is dominant. The most favorable channel involves the association of CF₃O₂ with H atom to form CF₃O₂H (IM1) via a barrierless process, and then the O–O bond dissociates to give out CF₃O + OH. The secondary product might be CF₃OH + O, formed from the O–O bond cleavage in the initial adduct CF₃O(H)O (IM2). Other products such as CF₃ + O₂H, HF + CF₂O₂ and O₂ + CHF₃ are of no importances because of higher barriers. On the triplet PES, only substitution mechanism is located. With higher barriers involving, the channels on the triplet PES could be negligible compared with the channels on the singlet PES.