Addition of silyloxydienes to 2,6-dibromo-1,4-benzoquinone: an approach to highly oxygenated bromonaphthoquinones for the synthesis of thysanone

The synthesis of tetraoxygenated bromonaphthoquinones 6a, 6b, 6c, 6d, key intermediates for a synthesis of the 3C protease inhibitor, thysanone, were investigated. Addition of 1-methoxy-1,3-bis(trimethylsilyloxy)-1,3-butadiene 8 to 2,6-dibromo-1,4-benzoquinone 10 in benzene afforded a mixture of naphthoquinone 6a, arising from Diels-Alder addition followed by aromatisation, and Michael adduct 12. The Michael adduct 12 predominated when THF was used as solvent whereas 6a predominated when benzene was used. Naphthoquinone 6a underwent benzylation to naphthoquinone 6c. Addition of 1,1-dimethoxy-3-trimethylsilyloxy-1,3-butadiene 9 to 2,6-dibromo-1,4-benzoquinone 10 followed by benzylation failed to afford the desired bromonaphthoquinone 6d yet methylation did afford naphthoquinone 6b. Bromonaphthoquinone 6d was finally prepared from naphthol 18, obtained from addition of diene 9 to 1,4-benzoquinone 17, followed by ortho-bromination and oxidation. Attempted Sakurai allylation of bromonaphthoquinone 6d afforded naphthodihydrofuran 21. A similar observation was observed for 2-carbomethoxy-1,4-naphthoquinone 22 that also underwent Sakurai allylation to afford naphthodihydrofuran 23. The structure of Michael adduct 12 was confirmed by X-ray crystallography.     

1,1,3,3,3-Pentafluoro-2-pentafluorophenyl-1,2-epoxypropane and trimethylphosphite: unusual 1,4-dioxan-2,5-dione ring formation

1,1,3,3,3-Pentafluoro-2-pentafluorophenyl-1,2-epoxypropane 1 reacted with trimethylphosphite giving two diastereomers, (Z)- and (E)-3,6-bis(trifluoromethyl)-3,6-bis(pentafluorophenyl)-1,4-dioxan-2,5-dione 2a, b in a 1:1 ratio, cyclodimerisation product of the intermediately generated α-lactone 4. Compounds 2a, b were hydrolysed to furnish 3,3,3-trifluoro-2-hydroxy-2-(2,3,4,5,6-pentafluorophenyl)propionic acid 5.     

Cyclic voltammetry and theoretical calculations of silyl-substituted 1,4-benzoquinones

Cyclic voltammograms of 2,3,5,6-tetrakis(trimethylsilyl)-1,4-benzoquinone (1a), 2,3,5,6-tetrakis(dimethylvinylsilyl)-1,4-benzoquinone (1b), 2,3,5,6-tetrakis(dimethylsilyl)-1,4-benzoquinone (1c), 4,4,6,6,10,10,12,12-octamethyl-4,6,10,12-tetrasilatricyclo[7.3.0.0^3,7]dodeca-1(9),3(7)-diene-2,8-dione (1d), and 5-t-butyl-2-(pentamethyldisilanyl)-1,4-benzoquinone (5h) showed that the first reduction step was reversible and that the second step was irreversible. The first half-wave reduction potentials of 1a, 1b, 1c, and 1d shifted negatively relative to 1,4-benzoquinone by −0.31, −0.24, −0.03, and −0.18 V, respectively. These results demonstrated that the electron-accepting ability of the chair-form quinones 1a and 1b was lower than that of the planar quinones 1c and 1d. The of 5h (−0.93 V vs. Ag/Ag⁺) was quite similar to that of 5-t-butyl-2-trimethylsilyl-1,4-benzoquinone (5a, −0.94 V). A cyclic voltammogram of dimethylsilylene-bridged 1,4-benzoquinone dimer 7 showed two kinds of (−0.76 and −0.94 V). The electrochemical behavior of 7 would be interpreted in terms of near-neighbor interactions between reduced and non-reduced quinone units. Theoretical calculations of the silyl-1,4-benzoquinones reproduced well the solid state structures of the compounds. Also, the computed vibrational frequencies of the silyl-1,4-benzoquinones were in good agreement with the IR absorption frequencies of the CO units in the compounds. The LUMO energy levels of the silyl-1,4-benzoquinones were quantitatively proportional to the .     

Reversible pyranyl complex formation and the mechanism of rearrangement to (η-6-oxocycloheptadienyl)Mn(CO)3 complexes in the reaction of β-cyclomanganated 1,5-diarylpenta-1,4-dien-3-ones and alkynes; the crystal structure of [2,4-diphenyl-6-(2-phenylethenyl)pyranyl-η]tricarbonylmanganese

[1-Phenyl-2-[(E)-3-phenylprop-2-en-1-oyl-κO]ethenyl-κC¹]tetracarbonylmanganese (1a) reacts with PhCCH in CCl₄ at room temperature to form [2,4-diphenyl-6-(2-phenylethenyl)pyranyl-η⁵]tricarbonylmanganese (2a), whose X-ray crystal structure is reported to complement that of its isomer [6-oxo-2,4,7-triphenylcyclohepta-1,4-dienyl-1,2,3,4,5-η]tricarbonylmanganese (3a), previously obtained from the reaction under reflux; but for 1a and PhCCPh the pyranyl complex cannot be isolated before rearrangement to the 3a analogue occurs. More forcing reaction conditions for 1a with Me₃SiCCH and for [1-(2-trifluoromethylphenyl)-2-[(E)-3-(2-trifluoromethylphenyl)prop-2-en-1-oyl-κO]ethenyl-κC¹]tetracarbonylmanganese (1b) with Me₃SiCCH and PhCCH give new analogues of 3a where previously only 2a analogues had been isolated.The reaction in CCl₄ under reflux of PhCCH and the β-deuterio analogue of 1a, [1-phenyl-2-[(E)-3-phenylprop-2-en-1-oyl-3d-κO]ethenyl-κC¹]tetracarbonylmanganese, gave deuteriated 3a with exo-D at the α-carbon, C7. This is inconsistent with the Mn-mediated Ph migration mechanism originally proposed to accommodate the endo position of Ph in 3a, and instead it implicates a cyclopropyl carbonyl-addition intermediate or a cyclopropyl acyl-substitution transition state in the key rearrangement step for 2a → 3a.     

Syntheses and structures of iron carbonyl complexes derived from N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine and N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine

The reaction of N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine (1) with Fe₂(CO)₉ in refluxing acetonitrile yielded di-(μ₃-thia)nonacarbonyltriiron (2), μ-[N-(5-methyl-2-thienylmethyl)-η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido]hexacarbonyldiiron (3), and N-(5-methyl-2-thienylmethylidene)amine (4). If the reaction was carried out at 45 °C, di-μ-[N-(5-methyl-2-thienylmethylidene)-η¹(N);η¹(S)-2-thiolethylamino]-μ-carbonyl-tetracarbonyldiiron (5) and trace amount of 4 were obtained. Stirring 5 in refluxing acetonitrile led to the thermal decomposition of 5, and ligand 1 was recovered quantitatively. However, in the presence of excess amount of Fe₂(CO)₉ in refluxing acetonitrile, complex 5 was converted into 2-4. On the other hand, the reaction of N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine (6) with Fe₂(CO)₉ in refluxing acetonitrile produced 2, μ-[N-(6-methyl-2-pyridylmethyl)-η¹ (N_py);η¹:η¹(N); η¹:η¹(S)-2-thiolatoethylamido]pentacarbonyldiiron (7), and μ-[N-(6-methyl-2-pyridylmethylidene)-η²(C,N);η¹:η¹(S)-2- thiolethylamino]hexacarbonyldiiron (8). Reactions of both complex 7 and 8 with NOBF₄ gave μ-[(6-methyl-2-pyridylmethyl)-η¹(N_py);η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido](acetonitrile)tricarbonylnitrosyldiiron (9). These reaction products were well characterized spectrally. The molecular structures of complexes 3, 7-9 have been determined by means of X-ray diffraction. Intramolecular 1,5-hydrogen shift from the thiol to the methine carbon was observed in complexes 3, 7, and 9.     

The reaction of α-phenethyl radicals with 1,4-benzoquinone and 2,6-di-tert-butyl-1,4-benzoquinone

The absolute rate constant for 1,4-benzoquinone (BQ) irreversibly trapping α-phenethyl radicals (3) has been determined as 4.4×10⁶ M⁻¹ s⁻¹ at 43 °C using acyclic cis azoalkane 9c as a radical precursor. These reactants afford the hydroquinone mono ether 4 at 30 °C but a mixture of products at elevated temperature. 2,6-Di-tert-butyl-1,4-benzoquinone (DTBQ) also reacts with 3 but the cyclohexadienone products are thermally labile.     

Cationic olefin Pd(II) complexes bearing α-iminoketone N,O-ligands: synthesis, intramolecular and interionic characterization and reactivity with olefins and alkynes

Complexes [Pd(η¹, η²-5-OMe-C₈H₁₂)(N,O)]BF₄ (N,O=2,6-(i-Pr)₂(C₆H₃)NC(Ph)-C(Ph)O, 1; 2,6-(i-Pr)₂(C₆H₃)NC(Me)-C(Ph)O, 2; 2-benzoylpyridine, 3) were synthesized by the reactions of [Pd(η¹,η²-5-OMe-C₈H₁₂)Cl]₂ with the suitable N,O-ligand. They were tested as catalysts for olefin or alkyne polymerizations. During such reactions 1-3 quantitatively transformed into their η¹,η²-1-OMe-C₈H₁₂ isomers (1a-3a). The same isomerization occurred in methylene chloride, even in the absence of olefins or alkynes, with a much slower rate. All complexes were fully characterized in solution by multinuclear and multidimensional low temperature NMR spectroscopy. The solid state structures of complexes 1 and 1a were investigated by X-ray single crystal studies. ¹⁹F, ¹H-HOESY NMR experiments carried out in methylene chloride-d₂ at 217 K indicated that the anion prefers to locate on the side of N,O-ligand shifted toward the O-arm in 1-1a and 2-2a while it approaches the N-arm in 3 and 3a compounds.     

Mono and dinuclear iridium, rhodium and ruthenium complexes containing chelating carboxylato pyrazine ligands: Synthesis, molecular structure and electrochemistry

The mononuclear complexes [(η⁵-C₅Me₅)IrCl(L¹)] (1), [(η⁵-C₅Me₅)RhCl(L¹)] (2), [(η⁶-p-PrⁱC₆H₄Me)RuCl(L¹)] (3) and [(η⁶-C₆Me₆)RuCl(L¹)] (4) have been synthesised from pyrazine-2-carboxylic acid (HL¹) and the corresponding complexes [{(η⁵-C₅Me₅)IrCl₂}₂], [{(η⁵-C₅Me₅)RhCl₂}₂], [{(η⁶-p-PrⁱC₆H₄Me)RuCl₂}₂], and [{(η⁶-C₆Me₆)RuCl₂}₂], respectively. The related dinuclear complexes [{(η⁵-C₅Me₅)IrCl}₂(μ-L²)] (5), [{(η⁵-C₅Me₅)RhCl}₂(μ-L²)] (6), [{(η⁶-p-PrⁱC₆H₄Me)RuCl}₂(μ-L²)] (7) and [{(η⁶-C₆Me₆)RuCl}₂(μ-L²)] (8) have been obtained in a similar manner from pyrazine-2,5-dicarboxylic acid (H₂L²). Compounds isomeric to the latter series, [{(η⁵-C₅Me₅)IrCl}₂(μ-L³)] (9), [{(η⁵-C₅Me₅)RhCl}₂(μ-L³)] (10), [{(p-PrⁱC₆H₄Me)RuCl}₂(μ-L³)] (11) and [{(η⁶-C₆Me₆)RuCl}₂(μ-L³)] (12), have been prepared by using pyrazine-2,3-dicarboxylic acid (H₂L³) instead of H₂L². The molecular structures of 2 and 3, determined by X-ray diffraction analysis, show the pyrazine-2-carboxylato moiety to act as an N,O-chelating ligand, while the structure analyses of 5-7, confirm that the pyrazine-2,5-dicarboxylato unit bridges two metal centres. The electrochemical behaviour of selected representatives has been studied by voltammetric techniques.     

Biomimetically inspired total synthesis of (12S)-12-hydroxymonocerin and (12R)-12-hydroxymonocerin

A concise asymmetric total synthesis of (12S)-12-hydroxymonocerin (1) and (12R)-12-hydroxymonocerin (2) were efficiently achieved from the known 4-bromo-2,6-dimethoxyphenol. The synthetic approach was inspired by our biomimetic synthesis of (+)-monocerin (3) and 7-O-demethylmonocerin (4). The cis-fused furobenzopyranones of 1 and 2 was efficiently constructed via an intramolecular nucleophilic trapping of a quinonemethide intermediate, which was obtained by benzylic oxidation of compound 10 using 2,3-Dichloro-5,6-dicyano-1,4-benzoquinone (DDQ).     

Endo and exo cyclometallated iron carbonyl complexes derived from N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine

The reaction of N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine (1) with Fe₂(CO)₉ in refluxing toluene gives endo cyclometallated iron carbonyl complexes 2 and 5, exo cyclometallated iron carbonyl complex 3, and unexpected iron carbonyl complex 4. Complexes 2, 3, and 5 are geometric isomers. Complex 5 differs from complex 2 in the switch of the original substituent from α to β position of the pyrrolyl ring, and the pyrrolyl ring bridges to the diiron centers in μ-(3,2-η¹:η²) coordination mode in stead of μ-(2,3-η¹:η²). In complex 4, the pyrrolyl moiety of the original ligand 1 has been displaced by a thienyl group, which comes from the same ligand. Single crystals of 2, 3, and 5 were subjected to the X-ray diffraction analysis. The major product 2 undergoes: (i) thermolysis to recover the original ligand 1; (ii) reduction to form a hydrogenation product, 6, of the original ligand; (iii) substitution to form a monophosphine-substituted complex 7; (iv) chemical as well as electrochemical oxidation to produce a carbonylation product, γ-butyrolactam 8.     

Syntheses and characterization of mono and dinuclear complexes of platinum group metals bearing benzene-linked bis(pyrazolyl)methane ligands

Reaction of the benzene-linked bis(pyrazolyl)methane ligands, 1,4-bis{bis(pyrazolyl)-methyl}benzene (L1) and 1,4-bis{bis(3-methylpyrazolyl)methyl}benzene (L2), with pentamethylcyclopentadienyl rhodium and iridium complexes [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂ (M = Rh and Ir) in the presence of NH₄PF₆ results under stoichiometric control in both, mono and dinuclear complexes, [(η⁵-C₅Me₅)RhCl(L)]⁺ {L = L1 (1); L2 (2)}, [(η⁵-C₅Me₅)IrCl(L)]⁺ {L = L1 (3); L2 (4)} and [{(η⁵-C₅Me₅)RhCl}₂(μ-L)]²⁺ {L = L1 (5); L2 (6)}, [{(η⁵-C₅Me₅)IrCl}₂(μ-L)]²⁺ {L = L1 (7); L2 (8)}. In contrast, reaction of arene ruthenium complexes [(η⁶­arene)Ru(μ-Cl)Cl]₂ (arene = C₆H₆, p-ⁱPrC₆H₄Me and C₆Me₆) with the same ligands (L1 or L2) gives only the dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(μ-L)]²⁺ {L = L1 (9); L2 (10)}, [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(μ-L)]²⁺ {L = L1 (11); L2 (12)} and [{(η⁶-C₆Me₆)RuCl}₂(μ-L)]²⁺ {L = L1 (13); L2 (14)}. All complexes were isolated as their hexafluorophosphate salts. The single-crystal X-ray crystal structure analyses of [7](PF₆)₂, [9](PF₆)₂ and [11](PF₆)₂ reveal a typical piano-stool geometry around the metal centers with six-membered metallo-cycle in which the 1,4-bis{bis(pyrazolyl)-methyl}benzene acts as a bis-bidentate chelating ligand.     

Trimethylstannyl (diphenylphosphino)acetate: a source of (diphenylphosphino)acetate ligand in the synthesis of coordination compounds

Trimethylstannyl (diphenylphosphino)acetate (1), which is readily accessible from potassium (diphenylphosphino)acetate and trimethylstannyl chloride, may serve as the source of (diphenylphosphino)acetate anion in the preparation of coordination compounds. Thus, the reactions between [M(cod)Cl₂] (M = Pd and Pt; cod = η²:η²-cycloocta-1,5-diene) and two equivalents of 1 give [M(Ph₂PCH₂CO₂-κ²O,P)₂] (2 and 3), while the reaction of [{Pd(μ-Cl)Cl(PFur₃)}₂] (4; Fur = 2-furyl) with one equivalent of 1 yields [SP-4-3]-[PdCl(Ph₂PCH₂CO₂-κ²O,P)(PFur₃)] (5). The reactions of 1 with the dimers [{Rh(η⁵-C₅Me₅)Cl(μ-Cl)}₂] and [{Ru(η⁶-1,4-MeC₆H₄(CHMe₂))Cl(μ-Cl)}₂] (at 1-to-metal ratio 1:1) produce O,P-chelated complexes as well, albeit as stable adducts with the liberated Me₃SnCl: [RhCl(η⁵-C₅Me₅)(Ph₂PCH₂CO₂-κ²O,P)] · Me₃SnCl (6) and[RuCl(η⁶-1,4-MeC₆H₄(CHMe₂))(Ph₂PCH₂CO₂-κ²O,P)] · Me₃SnCl (8). The related complexes with P-monodentate (diphenylphosphino)acetic acid, [RhCl₂(η⁵-C₅Me₅)(Ph₂PCH₂CO₂H-κ,P)] (7) and [RuCl₂(η⁶-1,4-MeC₆H₄(CHMe₂))(Ph₂PCH₂CO₂H-κP)] (9), were obtained by bridge splitting in the dimers with the phosphinocarboxylic ligand. All new compounds were characterized by spectral methods and combustion analyses, and the structures of 2 · 3CH₂Cl₂, 3, 4, 5, 6 and 8 were determined by X-ray crystallography.     

A series of novel metal-ferrocenedicarboxylate coordination polymers: crystal structures, magnetic and luminescence properties

Novel two-dimensional layered lanthanide(III)-ferrocenedicarboxylate coordination polymers {[M(η²-O₂CFcCO₂-η²)(μ₂-η²-O₂CFcCO₂-η²-μ₂)_0.5(H₂O)₂]·mH₂O}_n (Fc=(η⁵-C₅H₄)Fe(η⁵-C₅H₄), M=Tb³⁺, m=2, 1; M=Eu³⁺, m=2, 2; M=Y³⁺, m=1, 3) with trapezium-shaped units and one-dimensional wave-shaped Cd(II)-ferrocenedicarboxylate polymer {[Cd(η²-O₂CFcCO₂-η²)(H₂O)₃]·4H₂O}_n (4) have been prepared and structurally characterized by single crystal diffraction. In polymers 1-3, each central metal ion (Tb(III), or Eu(III) or Y(III)) is located in a pseudo-capped-tetragonal prism coordination geometry, and ferrocenedicarboxylate anion ligands have two coordination modes (bidentate-chelating mode and tridentate-bridging mode). The magnetic behaviors for 1 and 2 are studied in the temperature range of 5.0-300 K. The results show that the paramagnetic behavior of 2 is mainly due to the effective spin-orbital coupling between the ground and excited states through the Zeeman perturbation, and the weak magnetic interaction between Eu³⁺ centers can be observed. In addition, compared with sodium ferrocenedicarboxylate, the fluorescent intensities of the polymers 1-4 are enhanced in the solid state.     

Polymerization of ethene with zirconocene catalysts: an experimental and quantum chemical study of the influence of para-substituent in benzyl in bis{η-(1-benzyl)indenyl}zirconium dichlorides

The meso- and rac-like isomers of bis{η⁵-(1-benzyl)indenyl}zirconium dichloride (5), bis{η⁵-(1-para-methoxybenzyl)indenyl}zirconium dichloride (6), bis{η⁵-(1-para-fluoro-benzyl)indenyl}zirconium dichloride (7) and bis{η⁵-(1-phenylethyl)indenyl}zirconium dichloride (8) were synthesized and isolated. Solid-state structures of meso- and rac-like 5 were determined by X-ray structure analysis. Polymerization properties of the methylaluminoxane (MAO) activated diastereomers of complexes 5-8 were studied in ethene polymerizations under different monomer concentrations. The rac-like isomer of 1-phenylethyl-substituted 8/MAO showed significantly higher activity than the 1-benzyl substituted analogs 5-7/MAO. In addition, rac-8/MAO behaves like a single center catalyst producing polyethene with narrow molar mass distribution (1.8-1.9), while diastereomers of 5-7/MAO produce polymers with molar mass distributions varying from 2.7 up to 10.3. The rac and meso-like isomers of 5-7/MAO have different response on the monomer concentration. Quantum chemical calculations suggest a strong interaction between the benzyl substituent and the electron deficient zirconium center. The phenyl metal coordination energies depend on the electronic properties of the para-substituent. In 8/MAO, due to the ethyl spacer, the coordination does not have a significant role and therefore much higher activity and single center polymerization behavior is observed.     

Half-sandwich η-benzene Ru(II) complexes of phenolate-based pyridylalkylamine/alkylamine ligands: Synthesis, structure, and stabilization of one-electron oxidized species

Four half-sandwich ruthenium(II) complexes [(η⁶-C₆H₆)Ru(L¹-O)][PF₆] (1), [(η⁶-C₆H₆)Ru(L²-O)][PF₆] (2), [(η⁶-C₆H₆)Ru(L³-O)][PF₆] (3), [(η⁶-C₆H₆)Ru(L⁴-O)][PF₆] (4a), and [(η⁶-C₆H₆)Ru(L⁴-O)][BPh₄] (4b) [L¹-OH, 4-nitro-6-{[(2′-(pyridin-2-yl)ethyl)methylamino]methyl}-phenol; L²-OH, 2,4-di-tert-butyl-6-{[(2′-(pyridin-2-yl)ethyl)methylamino]methyl}-phenol; L³-OH, 2,4-di-tert-butyl-6-{[2′-((pyridin-2-yl)benzylamino)methyl}-phenol; L⁴-OH, 2,4-di-tert-butyl-6-{[(2′-imethylaminoethyl)methylamino]methyl}-phenol (L⁴-OH)], supported by a systematically varied series of tridentate phenolate-based pyridylalkylamine and alkylamine ligands are reported. The molecular structures of 1-3, 4a, and 4b have been elucidated in solution using ¹H NMR spectroscopy and of 1, 3, and 4b in the solid state by X-ray crystallography. Notably, due to coordination by the ligands the Ru center assumes a chiral center and in turn the central amine nitrogen also becomes chiral. The ¹H NMR spectra exhibit only one set of signals, suggesting that the reaction is completely diastereoselective [1: S_Ru,S_N/R_Ru,R_N; 2: R_Ru,R_N/S_Ru,S_N; 3: S_Ru,R_N/R_Ru,S_N; 4b: S_Ru,R_N/R_Ru,S_N]. The crystal packing in 1 and 3 is stabilized by C-H^…O interactions, in 4b no meaningful secondary interactions are observed. From the standpoint of generating phenoxyl radical, as investigated by cyclic voltammetry (CV), complex 1 is redox-inactive in MeCN solution. However, 2, 3, and 4a generate a one-electron oxidized phenoxyl radical coordinated species [2]²⁺, [3]²⁺, and [4a]²⁺, respectively. The radical species are characterized by CV, UV-Vis, and EPR spectroscopy. The stability of the radical species has been determined by measuring the decay constant (UV-Vis spectroscopy).     

Reactions of chelated η-pentadienyl iron complexes with nucleophiles

Ferracyclic (1-3-η³)pentadienyl complexes with electronically decoupled allyl and vinyl moieties were reacted with various heteroatom and carbon nucleophiles. Primary amines selectively attacked neutral (4-6-η³-pentadienyl)ferralactones 2 on the end of the allyl ligand to give 3-(endo-vinyl)-(4-6-η³-allyl)ferralactams 4 and by a similar reaction of the latter eventually 6-(exo-vinyl)-(4-6-η³-allyl)ferralactams 5. -like attack on the conjugated coplanar vinyl residue of 2 was not observed. The cationic η³-allyl complex 3 was attacked by nucleophiles either on the allylic terminus furnishing free (1Z, 3E)-dienes 8, or on the vinyl residue which is part of an activated Michael system to give η⁴-1,3-diene complexes 9. η⁴-1,3,5-Triene complex 10 was obtained with basic nucleophiles.     

Structural diversity in Cu(II), Cd(II) and Hg(II) coordination complexes with the rigid N,N′-bis(2/3-aryl)-1,4-benzenedicarboxamide ligand

The syntheses and structures of a series of metal complexes, namely Cu₂Cl₄(L¹)(DMSO)₂·2DMSO (L¹ = N,N′-bis(2-pyridinyl)-1,4-benzenedicarboxamide), 1; {[Cu(L²)_1.5(DMF)₂][ClO₄]₂·3DMF}_∞ (L² = N,N′-bis(3-pyridinyl)-1,4-benzenedicarboxamide), 2; {[Cd(NO₃)₂(L³)]·2DMF}_∞ (L³ = N,N′-bis-(2-pyrimidinyl)-1,4-benzenedicarboxamide), 3; {[HgBr₂(L³)]·H₂O}_∞, 4, and {[Na(L³)₂][Hg₂X₅]·2DMF}_∞ (X = Br, 5; I, 6) are reported. All the complexes have been characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 is dinuclear and the molecules are interlinked through S?S interactions. In 2, the Cu(II) ions are linked through the L² ligands to form 1-D ladder-like chains with 60-membered metallocycles, whereas complexes 3 and 4 form 1-D zigzag chains. In complexes 5 and 6, the Na(I) ions are linked by the L³ ligands to form 2-D layer structures in which the [Hg₂X₅]⁻ anions are in the cavities. The L² ligand acts only as a bridging ligand, while L¹ and L³ show both chelating and bridging bonding modes. The L¹ ligand in 1 adopts a trans-anti conformation and the L² ligand in 2 adopts both the cis-syn and trans-anti conformations, whereas the L³ ligands in 3–6 adopt the trans conformation.     

Synthesis and reactivity of asymmetrically substituted ansa-bridged zirconocene complexes: X-ray crystal structures of [Zr{R(H)C(η-C5Me4)(η-C5H4)}Cl2] (R = Bu, Bu) and [Zr{Bu(H)C(η-C5Me4)(η-C5H4)}(CH2Ph)2]

The dialkyl complexes, (R = Prⁱ, R′ = Me (2a), CH₂Ph (3a); R = Buⁿ, R′ = Me (2b), CH₂Ph (3b); R = Bu^t, R′ = Me (2c), CH₂Ph (3c); R = Ph, R′ = Me (2d), CH₂Ph (3d)), have been synthesized by the reaction of the ansa-metallocene dichloride complex, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (R = Prⁱ (1a), Buⁿ (1b), Bu^t (1c), Ph (1d)), and two molar equivalents of the alkyl Gringard reagent. The insertion reaction of the isocyanide reagent, CNC₆H₃Me₂-2,6, into the zirconium-carbon σ-bond of 2 gave the corresponding η²-iminoacyl derivatives, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}{η²-MeCNC₆H₃Me₂-2,6}Me] (R = Prⁱ (4a), Buⁿ (4b), Bu^t (4c), Ph (4d)). The molecular structures of 1b, 1c and 3b have been determined by single-crystal X-ray diffraction studies.     

Synthesis and structural characterization of η-allyl(α-diimine)nickel(II) complexes bearing trimethylsilyl groups

A set of isomeric para- and meta-trimethylsilylphenyl ortho-substituted N,N-phenyl α-diimine ligands [(Ar-NC(Me)-(Me)CN-Ar) Ar=2,6-di(4-trimethylsilylphenyl)phenyl (16); Ar=2,6-di(3-trimethylsilylphenyl)phenyl (17)] have been synthesized through a two-step procedure. The palladium-catalysed cross-coupling reaction between 2,6-dibromophenylamine (7) and 4-trimethylsilylphenylboronic acid (8), 3-trimethylsilylphenylboronic acid (9) was used to prepare 4,4^′-bis(trimethylsilyl)-[1,1^′;3^′,1″]terphenyl-2^′-ylamine (10) and 3,3^′-bis(trimethylsilyl)-[1,1^′;3^′,1″]terphenyl-2^′-ylamine (11). The di-1-adamantylphosphine oxide Ad₂P(O)H (13) and di-tert-butyl-trimethylsilylanylmethylphosphine tert-Bu₂P-CH₂-SiMe₃ (14) were used for the first time as ligands for the Suzuki coupling. The condensation of 2,2,3,3-tetramethoxybutane (15) with anilines 10 and 11 afforded α-diimines 16 and 17. The reaction of π-allylnickel chloride dimer (18), α-diimines (16), (17) and sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (BAF) (19) or silver hexafluoroantimonate (20) led to two sets of isomeric complexes [η³-allyl(Ar-NC(Me)-(Me)CN-Ar)Ni]⁺ X⁻, [Ar=2,6-di(4-trimethylsilylphenyl)phenyl, X=BAF (3), X=SbF₆ (4); Ar=2,6-di(3-trimethylsilylphenyl)phenyl, X=BAF (5), X=SbF₆ (6)]. The steric repulsion of closely positioned trimethylsilyl groups in 4 caused the distortion of the nickel square planar coordination by 17.6° according to X-ray analysis.     

Half sandwich complexes of Ru(II) and complexes of Pd(II) and Pt(II) with seleno and thio derivatives of pyrrolidine: Synthesis, structure and applications as catalysts for organic reactions

The reactions of PhSe⁻, PhS⁻ and Se²⁻ with N-{2-(chloroethyl)}pyrrolidine result in N-{2-(phenylseleno)ethyl}pyrrolidine (L1), N-{2-(phenylthio)ethyl}pyrrolidine (L2), and bis{2-pyrrolidene-N-yl)ethyl selenide (L3), respectively, which have been explored as ligands. The complexes [PdCl₂(L1/L2)] (1/7), [PtCl₂(L1/L2)] (2/8), [RuCl(η⁶-C₆H₆)(L1/L2)][PF₆] (3/9), [RuCl(η⁶-p-cymene)(L1/L2)][PF₆] (4/10), [RuCl(η⁶-p-cymene)(NH₃)₂][PF₆] (5) and [Ru(η⁶-p-cymene)(L1)(CH₃CN)][PF₆]₂·CH₃CN (6) have been synthesized. The L1-L3 and complexes were found to give characteristic NMR (Proton, Carbon-13 and Se-77). The crystal structures of complexes 1, 3-6, 9 and 10 have been solved. The Pd-Se and Ru-Se bond lengths have been found to be 2.353(2) and 2.480(11)/2.4918(9)/2.4770(5) Å, respectively. The complexes 1 and 7 have been explored for catalytic Heck and Suzuki-Miyaura coupling reactions. The value of TON has been found up to 85 000 with the advantage of catalyst’s stability under ambient conditions. The efficiency of 1 is marginally better than 7. The Ru-complexes 3 and 9 are good for catalytic oxidation of primary and secondary alcohols in CH₂Cl₂ in the presence of N-methylmorpholine-N-oxide (NMO). The TON value varies between 8.0 × 10⁴ and 9.7 × 10⁴ for this oxidation. The 3 is somewhat more efficient catalyst than 9.