A membraneless gas diffusion unit: design and its application to determination of ethanol in liquors by spectrophotometric flow injection

This work presents new design of a gas diffusion unit, called ‘membraneless gas diffusion (MGD) unit’, which, unlike a conventional gas diffusion (GD) unit, allows selective detection of volatile compounds to be made without the need of a hydrophobic membrane. A flow injection method was developed employing the MGD unit to determine ethanol in alcoholic drinks based on the reduction of dichromate by ethanol vapor. Results clearly demonstrated that the MGD unit was suitable for determination of ethanol in beer, wine and distilled liquors. Detection limit (3S/N) of MGD unit was lower than the GD unit (GD: 0.68%, v/v; MGD: 0.27%, v/v). The MGD design makes the system more sensitive as mass transfer is more efficient than that of GD and thus, MGD can perfectly replace membrane-based designs.     

Flow injection colorimetric method using acidic ceric nitrate as reagent for determination of ethanol

Ceric ammonium nitrate has been used for qualitative analysis of ethanol. It forms an intensely colored unstable complex with alcohol. In this work, a simple flow injection (FI) colorimetric method was developed for the determination of ethanol, based on the reaction of ethanol with ceric ion in acidic medium to produce a red colored product having maximum absorption at 415 nm. Absorbance of this complex could be precisely measured in the FI system. A standard or sample solution was injected into a deionized water donor stream and flowed to a gas diffusion unit, where the ethanol diffused through a gas permeable membrane made of plumbing PTFE tape into an acceptor stream to react with ceric ammonium nitrate in nitric acid. Color intensity of the reddish product was monitored by a laboratory made LED based colorimeter and the signal was recorded on a computer as a peak. Peak height obtained was linearly proportional to the concentration of ethanol originally presented in the injected solution in the range of 0.1-10.0% (v/v) (r² = 0.9993), with detection limit of 0.03% (v/v). With the use of gas diffusion membrane, most of the interferences could be eliminated. The proposed method was successfully applied for determination of ethanol in some alcoholic beverages, validating by gas chromatographic method.     

Hydrazine determination in sludge samples by high-performance liquid chromatography

A relatively simple and cost-effective method utilizing HPLC with UV detection was developed to detect and quantify hydrazine in sludge samples. The method was developed primarily for sludge samples, but it can also be applicable to soil and other environmental samples. The hydrazines in the matrices were derivatized to hydrazones with benzaldehyde. The hydrazones were separated using HPLC with an RP C-18 column in an isocratic mode with methanol-water (95:5 v/v) and detected with UV detection at 313 nm. The detection limit (25 microL injection) for the method is 0.02 microg/mL of hydrazine.     

Flow/sequential injection determination of gaseous ammonia with a glass diffusion denuder

A new combination of a flow/sequential injection method for the analysis of ammonia has been developed. Gaseous ammonia is selectively absorbed in a phosphoric acid coated glass tube and determined with Berthelot reagents by flow injection. The combination of the gas diffusion denuder sampler with flow injection makes this method very sensitive and selective. The limit of detection of 0.15 mug NH(3).     

Utilization of Dual Phase Gas Diffusion FIA with a Mass Spectrometer as a Detector

Abstract

The coupling of dual phase gas diffusion flow injection analysis with mass spectrometry has been shown to be feasible. This combined technique offers a high degree of selectivity and sensitivity. This technique was developed to determine whether volatile mixed arsenic selenium hydrides are formed in dual phase gas diffusion flow injection analysis hydride generation.     

Sensitive and Rapid Flow Injection Amperometric Hydrazine Sensor using an Electrodeposited Gold Nanoparticle Graphite Pencil Electrode

A gold (Au) nanoparticle-modified graphite pencil electrode was prepared by an electrodeposition procedure for the sensitive and rapid flow injection amperometric determination of hydrazine (N₂H₄). The electrodeposited Au nanoparticles on the pretreated graphite pencil electrode surface were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction spectroscopy, and electrochemical impedance spectroscopy. Cyclic voltammograms showed that the Au nanoparticle-modified pretreated graphite pencil electrode exhibits excellent electrocatalytic activity toward oxidation of hydrazine because the highly irreversibly and broadly observed oxidation peak at +600?mV at the pretreated graphite pencil electrode shifted to ?167?mV at the Au nanoparticle pretreated graphite pencil electrode; in addition, a significant enhancement in the oxidation peak current was obtained. Thus, the flow-injection (FI) amperometric hydrazine sensor was constructed based on its electrocatalytic oxidation at the Au nanoparticle-modified pretreated graphite pencil electrode. The Au nanoparticle-modified pretreated graphite pencil electrode exhibits a linear calibration curve between the flow injection amperometric current and hydrazine concentration within the concentration range from 0.01 to 100?µM with a detection limit of 0.002?µM. The flow injection amperometric sensor has been successfully used for the determination of N₂H₄ in water samples with good accuracy and precision.     

衍生化-气相色谱-三重四极杆质谱法测定泼尼松龙中联氨

泼尼松龙是一种广泛用于临床治疗的肾上腺糖皮质激素药物,其中联氨的残留会直接影响用药安全,但目前国内外还没有出台相应的法律法规和标准来管控药物中联氨的残留限值.联氨具有强极性和强还原性,理化性质很不稳定,易被氧化,又因缺少发色团,相对分子质量太小,检测起来难度很大,需引入一种衍生化试剂,降低其极性,生成相对分子质量较大且...     

Flow injection chemiluminescence determination of hydrazine by oxidation with chlorinated isocyanurates

A rapid and sensitive flow injection chemiluminescence (CL) method is described for the determination of hydrazine based on the CL generated during its reaction with either sodium dichloroisocyanurate (SDCC) or trichloroisocyanuric acid (TCCA) in alkaline medium. The emission intensity is greatly enhanced if dichlorofluorescein (DCF) as sensitizer is present in the reaction medium. The presence of citrate prevents the precipitation of some cations in the reaction medium and also causes an enhancement in emission intensity. The effect of analytical and flow injection variables on these CL systems and determination of hydrazine are discussed. The optimum parameters for the determination of hydrazine were studied and were found to be the following: SDCC and TCCA both 1x10(-3) M; NaOH, 2x10(-1) M; DCF, 5x10(-6) M; citrate, 1x10(-3) M and flow rate, 3.8 ml min(-1). The optimized method yielded 3sigma detection limits of 2x10(-7) and 3x10(-7) M for hydrazine with SDCC and TCCA oxidants, respectively. The method is simple, fast, sensitive, and precise and was applied to the determination of hydrazine in water samples.     

Simultaneous flow-injection flourimetric determination of ammonia and hydrazine with a novel mode of forming pH gradients

A flow injection configuration is suggested for the simultaneous determination of ammonia and hydrazine at the μg ml^?1 level by formation of zones of different pH. The analytes react with o-phthalaldehyde and mercaptoethanol to form fluorescent derivatives at different pH values. In addition to the normal flow method, a stopped flow method is proposed to increase the ranges that can be quantified. The analysis of samples containing hydrazine and ammonia in ratios between 0.3 and 70.0 is described.     

Flow injection determination of hydrazine with fluorimetric detection

A spectrophotometric flow injection system is described for the determination of hydrazine, involving oxidation of hydrazine by thallium(III) with concomitant formation of thallium(I). The optimum analytical conditions have been established. The linear range for hydrazine is 25-500 ng ml(-1) with a detection limit of 20 ng ml(-1). The sampling frequency is 40+/-5 samples h(-1). The relative standard deviation for 100, 250 and 500 ng ml(-1) is 3.5, 2.6 and 1.8%, respectively. The method has been applied to the determination of hydrazine in water.     

微流控芯片流动注射气体扩散分离光度测定系统的研究

提出了纳升级进样量的微流控芯片流动注射气体扩散分离光度检测系统. 制作三层结构微流控芯片, 在玻璃片上加工微反应通道, 用聚二甲基硅氧烷[Poly(dimethylsiloxane), PDMS]加工气体渗透膜和具有接收气体微通道的底片, 实现了生成气体的化学反应、气-液分离和检测在同一微芯片上的集成化. 采用缝管阵列纳升流动注射进样系统连续进样, 用吸光度法测定NH+4以验证系统性能. 结果表明， 该系统对NH+4的检出限为140 μmol/L(3σ), 峰高精度为3.7%(n=9). 在进样时间12 s、注入载流48 s和每次进样消耗200 nL试样条件下, 系统分析通量可达60样/h. 若加大样品量到800 nL, 使接收溶液停流1 min, 该系统对NH+4的检出限可达到35 μmol/L(3σ), 但分析通量降低到20样/h.     

Development of an automated measurement system using a diffusion scrubber and high-performance liquid chromatography for the monitoring of formaldehyde and acetaldehyde in automotive exhaust gas.

An automated measurement system for monitoring formaldehyde (HCHO) and acetaldehyde (CH3CHO) in automotive exhaust gas by using a diffusion scrubber in combination with high-performance liquid chromatography (HPLC) was developed. HCHO and CH3CHO are effectively collected by the diffusion scrubber, which consists of a hydrophobic porous PTFE tube disposed concentrically within a Pyrex-glass tube and a scrubbing solution. 2,4-Dinitrophenylhydrazine is used as the scrubbing solution for trapping HCHO and CH3CHO, which are derivatized to formaldehyde 2,4-dinitrophenylhydrazone (DNPH-HCHO) and acetaldehyde 2,4-dinitrophenylhydrazone (DNPH-CH3CHO), respectively, with phosphoric acid as an acid catalyst. After the collection of the gas sample, the sample solution in the diffusion scrubber is injected into the HPLC system and DNPH-HCHO and DNPH-CH3CHO are separated and determined. All measurement operations are sequenced by a programmable controller and an automated continuous measurement can be performed at 10 min intervals. The collection efficiencies of HCHO and CH3CHO were higher than 97% at a gas flow rate of 0.21 min-1. The detection limit (3 sigma of the blank value) was 0.001 ppm v/v for HCHO and CH3CHO for a 1.61 gas sample volume. No interference of co-existing nitrogen dioxide (NO2) in the collection of HCHO and CH3CHO was observed. The average concentration of HCHO in the exhaust gas from methanol-fueled vehicles was 77.3 ppm v/v (n = 5) in the cold-phase mode when engines were first started. In the hot-phase mode, the average concentration of HCHO was 3.3 ppm v/v (n = 15). The concentrations of HCHO measured by this automated measurement system were in good agreement with those obtained using the impinger-HPLC method.     

Simultaneous determination of hydroxylamine and cyanide in formulations containing pralidoxime salts by flow injection

A flow injection method is described for the simultaneous determination of cyanide and hydroxylamine which are known decomposition products of formulations containing pralidoxime salts used in the treatment of anticholinesterase poisoning. By using the diffusion of HCN from the carrier stream followed by amperometric detection, high selectivity and sensitivity and a wide dynamic range can be achieved. Hydroxylamine is determined by its oxidation with iodine to nitrite which can then be determined colorimetrically. The gas diffusion unit effectively acts as a stream splitter for the two analytes allowing their simultaneous determination from a single sample injection. The performance of the system and its applicability to thermally stressed pralidoxime solutions are described.     

Simultaneous flow injection determination of ammoniacal nitrogen and chloride in industrial effluent water with a combined on-line gas diffusion/dialyser unit

An on-line gas diffusion/dialyser unit has been designed and incorporated into the manifold of a flow injection system for the simultaneous determination of two different species in a single sample injected into the FIA system. A fast and reliable fully automated two-component flow injection procedure has been carried out where a single sample (50 l industrial effluent water) is injected into a carrier stream and simultaneously gas diffused and dialysed in a single on-line gas diffusion/dialyser unit for the determination of ammonia and chloride, respectively. The results obtained for the ammoniacal nitrogen and chloride in industrial effluent water compared well with data obtained by standard methods. The relative standard deviation for industrial effluent water samples with concentrations of ammoniacal nitrogen in the range between 0.050 and 1 g/l and chloride from 0.127 to 2.531 g/l have been better than 1.0% for ammoniacal nitrogen and 0.5% for chloride, respectively. The proposed system could be attractive for routine analyses of industrial effluent water.     

填充毛细管液相色谱-毛细管气相色谱在线联用分析八角茴香挥发油

首次将填充毛细管高效液相色谱-毛细管气相色谱在线联用技术(μ-HPLC-CGC)用于分离分析八角茴香果实的挥发油成分。液相色谱选用氰基分析柱(250 mm×0.32 mm i.d.),正己烷-乙腈-二氯甲烷(体积比为80∶8∶12)为流动相,对挥发油样品做族组分分离,得到的5个族组分被依次存放在多位储存接口内,然后不分流分别转入毛细管气相色谱仪做详细分析。气相色谱柱由10 m×0.53 mm i.d.保留间隔柱和30 m×0.53 mm i.d.×1.0 μm SE-54分析柱组成。采用了不分流柱内进样模     

Flow Injection Analysis with BAW Detection

A new flow injection analysis technique is described. It is based on the use of a new kind of bulk acoustic wave (BAW) detector in combination with gas diffusion separation. The method is characterized by its high selectivity, promising sensitivity, favorable throughput, good precision and simple construction, which make it an attractive alternative to the conventional analytical methods.     

Flow injection analysis chemiluminescence detection of residual ozone

Chemiluminescent reagents for the determination of residual ozone were compared. Each method was automated using gas diffusion flow injection analysis. The luminol method gave a four order of magnitude working range with an LOD of 0.008 mg O(3)/l. The luminol method has better analytical characteristics than the standard colorimetric Indigo Blue methods.     

Electrocatalytic oxidation of hydrazine at poly(4,5-dihydroxy-1,3-benzenedisulfonic acid) multiwall carbon nanotubes modified-glassy carbon electrode: Improvement of the catalytic activity

A stable electroactive thin film of poly(4,5-dihydroxy-1,3-benzenedisulfonic acid) was electrochemically deposited at the surface of multiwall carbon nanotubes-glassy carbon electrode. The electrocatalytic oxidation of hydrazine has been studied at the surface of the modified electrode using cyclic voltammetry, chronoamperometry and linear sweep voltammetry as diagnostic techniques. The modified electrode exhibits good electrocatalytic activity for the oxidation of hydrazine with a good sensitivity. Linear calibration range was in the wide concentration range of 10–3540 μM hydrazine with a detection limit of 1.8 μM and a sensitivity of 85.3 nA/μM. A Tafel plot, derived from voltammograms, indicated a one-electron transfer process to be the rate-limiting step and the overall number of electrons involved in the catalytic oxidation of hydrazine was found to be four. The influences of potentially interfering substances were studied. The diffusion coefficient of hydrazine was also evaluated. Finally, the proposed modified electrode was used for the determination of hydrazine in spiked water samples.     

Determination of ethanol in liquor by near-infrared spectrophotometry with flow injection

A simple procedure for the determination of ethanol in a liquor by near-infrared (NIR) spectrophotometry with flow injection (FI) is proposed. A liquor sample is equilibrated off-line with dried chloroform to extract ethanol into the organic phase. The extract is injected into a carrier stream of dried chloroform passing through a home-made flow through cell (1 mm path length) sitting in a NIR spectrophotometer for continuous monitoring of absorbance at 2305 or 2636 nm. The ethanol content can be evaluated from a calibration established by a plot of change in absorbance versus concentration of ethanol standard solutions. Optimization of the system will be discussed. A calibration is linear in the range of 20–50% (v/v) ethanol. A throughput of 240 injections h⁻¹ can be obtained. The procedure is validated by comparing the results with an analysis using gas chromatography.     

A hydrogen-nitrogen gas coulometer

The hydrogen-oxygen gas coulometer yields a negative error at small current densities. A hydrogen-nitrogen gas coulometer, employing a hydrazine sulphate electrolyte, and free from this error, is described. A new form of the gas coulometer, employing the hydrazine sulphate electrolyte and suitable for the accurate integration of small quantities of electricity (5 to 20 coulombs) has been developed.