Behavior of acetonitrile confined to mesoporous silica gels as studied by 129Xe NMR: a novel method for determining the pore sizes

129Xe NMR spectra of xenon dissolved in acetonitrile confined into three mesoporous silica gels with nominal pore diameters of 40, 60, and 100 A have been measured over the temperature range 170-245 K. The spectra consist of a number of lines, which contain detailed information on the system. The most interesting result is that the chemical shift of a particular signal observed below the melting point of confined acetonitrile is highly sensitive to the pore size, and hence its shape is sensitive to the pore size distribution function. This signal originates from the xenon atoms sited in very small cavities built up inside the pores during the freezing transition. It can be used to determine the size or even the size distribution function of the pores. In addition, the emergence of this signal reveals the phase transition temperature of acetonitrile inside the pores, which can also be used to determine the size of the pores. The difference in the chemical shifts of two other signals, which arise from xenon dissolved in bulk and confined acetonitrile, provides still another novel method for determining the size of the pores.     

Xenon porometry at room temperature

Xenon porometry is a method in which porous material is immersed in a medium and the properties of the material are studied by means of 129Xe nuclear magnetic resonance (NMR) of xenon gas dissolved in the medium. For instance, the chemical shift of a particular signal (referred to as signal D) arising from xenon inside small pockets formed in the pores during the freezing of the confined medium is highly sensitive to the pore size. In the present study, we show that when naphthalene is used as the medium the pore size distribution of the material can be determined by measuring a single one-dimensional spectrum near room temperature and converting the chemical shift scale of signal D to the pore radius scale by using an experimentally determined correlation. A model has been developed that explains the curious behavior of the chemical shift of signal D as a function of pore radius. The other signals of the spectra measured at different temperatures have also been identified, and the influence of xenon pressure on the spectra has been studied. For comparison, 129Xe NMR spectra of pure xenon gas adsorbed to porous materials have been measured and analyzed.     

Behavior of a thermotropic nematic liquid crystal confined to controlled pore glasses as studied by 129Xe NMR spectroscopy

The behavior of nematic liquid crystal (LC) Merck Phase 4 confined to controlled pore glass (CPG) materials was investigated using 129Xe nuclear magnetic resonance (NMR) spectroscopy of xenon gas dissolved in the LC. The average pore diameters of the materials varied from 81 to 2917 A, and the measurements were carried out within a wide temperature range (approximately 185-370 K). The spectra contain lots of information about the effect of confinement on the phase of the LC. The theoretical model of shielding of noble gases dissolved in liquid crystals on the basis of pairwise additivity approximation was applied to the analysis of the spectra. When pore diameter is small, smaller than approximately 150 A, xenon experiences on average an isotropic environment inside the pore, and no nematic-isotropic phase transition is observed. When the size is larger than approximately 150 A, nematic phase is observed, and the LC molecules are oriented along pore axis. The orientational order parameter of the LC, S, increases with increasing pore size. In the largest pores, the orientation of the molecules deviates from the pore axis direction to magnetic field direction, which implies that the size of the pores (approximately 3000 A) is close to magnetic coherence length. The decrease of magnetic coherence length with increasing temperature is clearly seen from the spectra. When the sample is cooled rapidly by immersing it in liquid nitrogen, xenon atoms do not squeeze out from the solid, as they do during gradual freezing, but they are occluded inside the solid lattice, and their chemical shift is very sensitive to crystal structure. This makes it possible to study the effect of confinement on the solid phases. According to the measured 129Xe NMR spectra, possibly three different solid phases are observed from bulk liquid crystal in the used temperature region. The same is also seen from the samples containing larger pores (pore size larger than approximately 500 A), and the solid-solid phase-transition temperatures are the same. However, no first-order solid-solid phase transitions are observed from the smaller pores. Melting point depression, that is, the depression of solid-nematic transition temperature observed from the pores as compared with that in bulk LC, is seen to be very sensitive to the pore size, and it can be used for the determination of pore size of an unknown material.     

Behavior of liquid crystals confined to mesoporous materials as studied by 13C NMR spectroscopy of methyl iodide and methane as probe molecules

The behavior of thermotropic nematic liquid crystals (LCs) Merck Phase 4 and ZLI 1115 confined to mesoporous controlled pore glass materials was investigated using 13C nuclear magnetic resonance spectroscopy of probe molecules methyl iodide and methane. The average pore diameters of the materials varied from 81 to 375 A, and the temperature series measurements were performed on solid, nematic, and isotropic phases of bulk LCs. Chemical shift, intensity, and line shape of the resonance signals in the spectra contain lots of information about the effect of confinement on the state of the LCs. The line shape of the 13C resonances of the CH3I molecules in LCs confined into the pores was observed to be even more sensitive to the LC orientation distribution than, for example, that of 2H spectra of deuterated LCs or 129Xe spectra of dissolved xenon gas. The effect of the magnetic field on the orientation of LC molecules inside the pores was examined in four different magnetic fields varying from 4.70 to 11.74 T. The magnetic field was found to have significant effect on the orientation of LC molecules in the largest pores and close to the nematic-isotropic phase transition temperature. The theoretical model of shielding of noble gases dissolved in LCs based on pairwise additivity approximation was utilized in the analysis of CH4 spectra. For the first time, a first-order nematic-isotropic phase transition was detected to take place inside such restrictive hosts. In the larger pores a few degrees below the nematic-isotropic phase transition of bulk LC the 13C quartet of CH3I changes as a powder pattern. Results are compared to those derived from 129Xe NMR measurements of xenon gas in similar environments.     

2D 129Xe EXSY of xenon atoms in a thermotropic liquid crystal confined to a controlled-pore glass

Two-dimensional (129)Xe exchange spectroscopy (EXSY) NMR measurements are presented for xenon atoms dissolved in a thermotropic nematic Liquid Crystal (LC), Merck Phase 4, confined to a mesoporous Controlled-Pore Glass (CPG) material with an average pore diameter of 81 A. Experiments were carried out as a function of mixing time at two different temperatures in which Phase 4 appears in nematic and isotropic phases. The exchange rate constants of xenon atoms between two different sites were determined utilizing the intensities of diagonal and off-diagonal signals measured in the EXSY spectra. In the studied system, the sites are: (a) xenon dissolved in the bulk LC between the CPG particles; and (b) xenon in the LC confined inside the pores. The diffusion rate of xenon atoms between the various sites was observed to be very slow.     

Influence of diffusion on pore size distributions determined by xenon porometry

Xenon porometry is a new method for characterization of porous materials. In this method, the material is immersed in a medium, and its properties are studied by means of 129Xe NMR spectra of xenon dissolved in the sample. The method is particularly suitable for the determination of pore size distribution of the material, since the spectra display two signals whose chemical shift is dependent on the pore size. A prerequisite for an accurate determination is the fact that the diffusion of xenon between different pores is slow enough. The diffusion is studied in this work using two-dimensional exchange spectroscopy (2-D EXSY). The spectra measured as a function of the mixing time imply that the exchange is really slow as compared with the NMR time scale, and therefore the distribution of the resonance frequencies indeed represents the pore size distribution.     

Characterization of the metal-organic framework compound Cu3(benzene 1,3,5-tricarboxylate)2 by means of 129Xe nuclear magnetic and electron paramagnetic resonance spectroscopy

129Xe NMR measurements of adsorbed xenon are shown for the first time to be a suitable tool to characterize the porosity and the properties of the metal-organic framework Cu3(BTC)2(H2O)3 (BTC = benzene 1,3,5-tricarboxylate). The NMR experiments are performed at room temperature and over a wide range of xenon pressure and on two different synthesized Cu3(BTC)2 samples. 129Xe NMR results reveal that in dependence on the kind of the synthesis pathway either one or two signals are observed which can be attributed to two kinds of fast exchange of xenon atoms in two pores with different pore sizes. Coadsorption experiments of xenon and ethylene demonstrate that the xenon atoms prefer to fill the greater pores of the material because the smaller pores are occupied with residual molecules from the synthesis procedure and additionally adsorbed ethylene. Besides the NMR experiments a series of electron paramagnetic resonance (EPR) measurements are performed to estimate the state of copper having a strong influence on the chemical shift of the adsorbed xenon. The EPR experiments demonstrate that spin exchange between the interconnected copper dimers is taking place across the BTC linker molecules in the Cu3(BTC)2 framework.     

MCM-41分子筛的合成及129Xe核磁共振的研究

ＭＣＭ４１中孔分子筛是１９９２年由Ｍｏｂｉｌ公司的科学家Ｋｒｅｓｇｅ［１］等人首次合成的,并在《自然》杂志发表。这种中孔分子筛具有六角形孔径,孔径２ｎｍ～１０ｎｍ,这种分子筛的孔径可以通过水晶模板来控制［２］。已报道的合成ＭＣＭ４１,孔径一般在２．０ｎｍ～３．５ｎｍ,使用的水晶模板一般是单一或两种阳离子季铵盐表面活性剂［３,４］。本论文通过引入第二种扩孔模板,与阳离子季铵盐协同作用,合成了孔径５．２ｎｍ（ＢＥＴ法测）的ＭＣＭ４１。通过氮气的吸脱附,测定了分子筛的比表面和孔径等性质。Ｊ．Ｆｒａｉｓｓａｒｄ…     

MCM-41分子筛的合成及129Xe核磁共振的研究

Purely siliceous MCM-41 with a narrow pore-size distribution, different pore size, high surface area was synthesized . As prepared, calcined and catalytically tested MCM-41 materials have been comprehensively characterized by N₂ adsorption/desorption at 77K and ¹²⁹Xe NMR. By adding mesitylene during the synthesis, the pore size of MCM-41 was enlarged to 5.2nm. The chemical shift in ¹²⁹Xe NMR spectroscopy of adsorbed xenon indicates that the MCM-41 is one dimensional pore channels .     

Hyperpolarized 129Xe NMR investigation of multifunctional organic/inorganic hybrid mesoporous silica materials

An extensive study has been made on a series of multifunctional mesoporous silica materials, prepared by introducing two different organoalkoxysilanes, namely 3-[2-(2-aminoethylamino)ethylamino]propyltrimethoxysilane (AEPTMS) and 3-cyanopropyltriethoxysilane (CPTES) during the base-catalyzed condensation of tetraethoxysilane (TEOS), using the variable-temperature (VT) hyperpolarized (HP) 129Xe NMR technique. VT HP-129Xe NMR chemical shift measurements of adsorbed xenon revealed that surface properties as well as functionality of these AEP/CP-functionalized microparticles (MP) could be controlled by varying the AEPTMS/CPTES ratio in the starting solution during synthesis. Additional chemical shift contribution due to Xe-moiety interactions was observed for monofunctional AEP-MP and CP-MP as well as for bifunctional AEP/CP-MP samples. In particular, unlike CP-MP that has a shorter organic backbone on the silica surface, the amino groups in the AEP chain tends to interact with the silanol groups on the silica surface causing backbone bending and hence formation of secondary pores in AEP-MP, as indicated by additional shoulder peak at lower field in the room-temperature 129Xe NMR spectrum. The exchange processes of xenon in different adsorption regions were also verified by 2D EXSY HP-129Xe NMR spectroscopy. It is also found that subsequent removal of functional moieties by calcination treatment tends to result in a more severe surface roughness on the pore walls in bifunctional samples compared to monofunctional ones. The effect of hydrophobicity/hydrophilicity of the organoalkoxysilanes on the formation, pore structure and surface property of these functionalized mesoporous silica materials are also discussed.     

Novel method for the measurement of xenon gas solubility using 129Xe NMR spectroscopy

A novel method is presented for determining xenon partitioning between a gas phase and a liquid phase. An experimental setup which permits the simultaneous measurement of the 129Xe chemical shift in both the gas and the liquid phases, that is, under the same experimental conditions, has been designed. Xenon solubility is obtained via 129Xe chemical shift measurements in the gas phase. The method was validated against xenon solubility data from the literature; in general, the agreement is found to be within 3%. The solubility of xenon in three solvents for which data have not been previously reported (acetone, acetonitrile, and 1,1,2,2-tetrachloroethane) was determined using this novel method. 129Xe chemical shifts for dissolved xenon are also reported; it is found that xenon-xenon interactions may play a significant role in the liquid phase even at low equilibrium xenon pressures.     

129Xe nuclear magnetic resonance study of pitch-based activated carbon modified by air oxidation/pyrolysis cycles: a new approach to probe the micropore size

(129)Xe NMR has been used to study a series of homologous activated carbons obtained from a KOH-activated pitch-based carbon molecular sieve modified by air oxidation/pyrolysis cycles. A clear correlation between the pore size of microporous carbons and the (129)Xe NMR of adsorbed xenon is proposed for the first time. The virial coefficient delta(Xe)(-)(Xe) arising from binary xenon collisions varied linearly with the micropore size and appeared to be a better probe of the microporosity than the chemical shift extrapolated to zero pressure. This correlation was explained by the fact that the xenon collision frequency increases with increasing micropore size. The chemical shift has been shown to vary very little with temperature (less than 9 ppm) for xenon trapped inside narrow and wide micropores. This is indicative of a smooth xenon-surface interaction potential.     

Nondisruptive Dissolution of Hyperpolarized 129Xe into Viscous Aqueous and Organic Liquid Crystalline Environments

Studies of hyperpolarized xenon‐129 (hp‐¹²⁹Xe) in media such as liquid crystals and cell suspensions are in demand for applications ranging from biomedical imaging to materials engineering but have been hindered by the inability to bubble Xe through the desired media as a result of viscosity or perturbations caused by bubbles. Herein a device is reported that can be reliably used to dissolve hp‐¹²⁹Xe into viscous aqueous and organic samples without bubbling. This method is robust, requires small sample volumes (<60 μL), is compatible with existing NMR hardware, and is made from readily available materials. Experiments show that Xe can be introduced into viscous and aligned media without disrupting molecular order. We detected dissolved xenon in an aqueous liquid crystal that is disrupted by the shear forces of bubbling, and we observed liquid‐crystal phase transitions in (MBBA). This tool allows an entirely new class of samples to be investigated by hyperpolarized‐gas NMR spectroscopy.     

Probing the interaction of solvents with the stationary phase of C18 high-performance liquid chromatographic column material by variable-temperature dependent 129Xe nuclear magnetic resonance spectroscopy

VT (129)Xe NMR was applied to probe the interactions of solvents having different polarity indices with the stationary phase of a RP-C18 HPLC column material. It was observed that the highly polar ethylene glycol molecules do not mix with the alkyl chains of the RP-C18 stationary phase and the solvent is unable to enter the pores and the spaces between the particles. Three phases in this sample are defined as stationary/xenon phase, xenon gas phase (in the pores and the spaces between the particles) and ethylene glycol/xenon phase. In contrast to ethylene glycol, the nonpolar solvent cyclohexane was observed to be well mixed with the RP-C18 stationary phase. The capillary rise effect allows the solvent to enter the pores and the spaces between the particles. Two phases in this sample are defined as stationary/cyclohexane/xenon phase and cyclohexane/xenon phases. The properties of ethyl acetate are between those of ethylene glycol and cyclohexane. The (129)Xe NMR results show that the rational reversed phases should be conditioned from highly solvating to more polar solvents to remove the trapped air. The (129)Xe NMR results also show that pure stationary phase exists only when a highly polar solvent is used in reversed-phase chromatography. For a solvent with lower polarity, a stationary/solvent phase actually forms. This, together with the mobile phase, determines the selective factor for separating mixtures.     

129Xe NMR as a probe of polymer blends

The miscibility of two-component polymer blends has been investigated using xenon-129 (¹²⁹Xe) nuclear magnetic resonance (NMR) to probe the phase morphology. The chemical shift of ¹²⁹Xe dissolved in a given polymer is unique, thus heterogeneous blends with large domain sizes exhibit two ¹²⁹Xe NMR lines. When a single resonance is obtained, the data are consistent with miscibility, yielding an upper bound on the domain size. The temperature dependence of the relative solubilities and chemical shifts of ¹²⁹Xe dissolved in the pure components may allow a determination of the phase morphology in blends exhibiting a single resonance. The method is used to demonstrate that polychloroprene and 25% epoxidized 1,4-polyisoprene form a miscible blend.     

Freezing phenomena of lennard-jones fluid confined in jungle-gym nanospace: a monte carlo study

We performed grand canonical Monte Carlo simulations for a Lennard-Jones fluid confined in a jungle-gym (JG) nanospace of cubic structure modeled on a specific type of metal organic frameworks (MOFs) to investigate freezing phenomena. Our simulations clarified that the JG nanospace with the pore sizes from 5sigma to 11sigma strongly depresses freezing due to a geometrical hindrance effect, resulting in far lower freezing temperature than the bulk freezing point. The fluid-rod interaction is found to give little effect on the freezing temperature in the larger pore sizes. For smaller pores from 2sigma to 3sigma, on the other hand, a dominant factor is a template effect to enhance the localization of molecules into a specific configuration that matches the locations of potential minima, leading to a variety of molecular configurations. In this range of smaller pore sizes, the solidification temperatures are higher than those of the larger pores mainly due to strong influence of the fluid-rod interaction but are still lower than the bulk freezing temperature. In addition, a unique solid-to-solid transition is observed in a specific size of pore of 2.73sigma, which is caused by structural correlation between adjacent cells. On the basis of these results, a phase diagram in the JG nanospace is drawn.     

<Superscript>129</Superscript>Xe NMR spectroscopy of adsorbed xenon: Possibilites for exploration of microporous carbon materials

Despite the extensive use of ¹²⁹Xe NMR for characterization of high surface-to-volume porous solids, particularly zeolites, this method has not been widely used to explore the properties of microporous carbon materials. In this study, commercial amorphous carbons of different origin (produced from different precursors) and a series of activated carbons obtained by successive cyclic air oxidation/pyrolysis treatments of a single precursor were examined. Models of ¹²⁹Xe chemical shift as a function of local Xe density, mean pore size, and temperature are discussed. The virial coefficient arising from binary xenon collisions, σ_Xe-Xe, varied linearly with the mean pore size given by N₂ adsorption analysis; σ_Xe-Xe appeared to be a better probe of the mean pore size than the chemical shift extrapolated to zero pressure, σ_S.     

Probing polymer colloids by Xe NMR

Model aqueous dispersions of polystyrene, poly(methyl methacrylate), poly(n-butyl acrylate) and a statistical copolymer poly(n-butyl acrylate-co-methyl methacrylate) were studied using xenon NMR spectroscopy. The ¹²⁹Xe NMR spectra of these various latexes reveal qualitative and quantitative differences in the number of peaks and in their line widths and chemical shifts. Above the glass transition temperature, exchange between xenon sorbed in the particle core and free xenon outside the particles is fast on the ¹²⁹Xe spectral time-scale and a single ¹²⁹Xe signal is observed. At temperatures below the glass transition temperature, the exchange between sorbed and free xenon is slow on the ¹²⁹Xe spectral time-scale and two ¹²⁹Xe NMR signals can be observed. If the signal of sorbed ¹²⁹Xe is observed, its chemical shift, line width and integral relative to the integral of free ¹²⁹Xe can be used for the characterization of the particle core. The line width of free ¹²⁹Xe provides the residence time of xenon outside the particles and can be used to determine the rate constant characterizing the kinetics of penetration of xenon in the particles. This rate constant emerges as promising parameter for the characterization of the polymer particle surface.     

超极化129Xe核磁共振技术及其在多孔催化材料研究中的应用

 激光抽运和自旋交换的超极化 129Xe 核磁共振是近几年发展起来的一种新方法,它比普通 129Xe 核磁共振的检测灵敏度提高约104 ～105倍,是研究材料孔结构和孔内粒子分布的强有力工具. 本文介绍了超极化 129Xe 核磁共振技术并综述了其在多孔催化材料研究中的应用,特别是对催化反应中广泛使用的无机微孔和介孔材料中的应用进行了详细的讨论. 最后展望了此技术的应用前景.     

129Xe NMR study of the localization of PdCl2 supported on carbon nanotubes

Localization of PdCl₂ clusters supported on multi-wall carbon nanotubes (MWCNT) has been investigated using ¹²⁹Xe NMR of adsorbed xenon. As-made MWCNTs with channels initially inaccessible for adsorption and ball-milled MWCNTs with the totally accessible internal surface were used as supports. The observed ¹²⁹Xe NMR spectra were determined by the dynamics of xenon exchange between the aggregate pores and nanotube channels. No considerable changes of the ¹²⁹Xe NMR spectrum with the concentration of supported PdCl₂ were observed for the as-made MWCNT, while an additional resonance appeared for the ball-milled nanotubes. The ¹²⁹Xe NMR experiments evidenced the supported species to be localized on the internal surface of the ball-milled MWCNT.