Automated Sequential‐injection Chemiluminescence Determination of Glucosamine Sulphate via Luminol‐Hydrogen Peroxide System

A highly sensitive automated sequential‐injection chemiluminescence (SIA‐CL) method for determination of glucosamine sulphate (GLS) was developed. The goal of the present work is the evaluation of the enhancement effect of the investigated drug glucosamine sulphate on the chemiluminescence reaction between luminol and H₂O₂ in alkaline medium of 1.0 × 10^?2 mol L^?1 sodium hydroxide at pH 11. The experimental conditions affecting the CL reaction such as the sequence of the reagents, concentrations, flow rate and aspirated volumes of reactants were systematically investigated and optimized. Under optimum conditions 50 μL of 1.0 × 10^?3 mol L^?1 luminol, 30 μL of a GLS test solution and 50 μL of 1.0 × 10^?2 mol L^?1 H₂O₂ were used and the luminescing zone was pushed into the detector at a flow rate 100 μL s^?1. The proposed method recorded high sensitivity, accuracy and simplicity that could be clarified as linear concentration range 1.0‐2000 ng mL^?1 with rectilinear part (r = 0.9992, n = 9) and limit of detection 0.3 ng mL^?1, along with relative standard deviation 1.3%. It was found that the developed method can be used directly to determine the investigated drug GLS in its pharmaceutical dosage forms and in spiked serum and urine by diluting the samples for a 1000 fold. The obtained results were statistically analyzed and compared with those obtained by the reported method.     

银（III）配合物-鲁米诺流动注射化学发光新体系测定肾上腺素

儿茶酚胺是一类非常重要的神经递质,在人体的心血管系统、神经系统、内分泌腺、肾脏、平滑肌等组织系统的生理活动中起着广泛的调节作用。肾上腺素为儿茶酚胺的一种,建立灵敏、高效的肾上腺素检测技术具有重要的临床意义。本文将银（Ⅲ）配合物与鲁米诺组成新的流动注射化学发光体系,利用碱性介质中肾上腺素对三价银配合物－鲁米诺化学发光体系有明显的增强效应来测定肾上腺素的含量,并据此建立了高效测定肾上腺素的流动注射化学发光新方法。在优化的条件下,该方法测定肾上腺素的线型范围为1.0×10－9～1.0×10－7 mol L-1,检出限为8.0×10－10 mol L-1,对1.5×10－8 mol L-1肾上腺素11次平行测定,其相对标偏差为2.9％。利用建立的分析方法测定了药物肾上腺素,并对三价银－鲁米诺化学发光新体系测定肾上腺素的反应机理进行了讨论。     

Flow injection determination of hydrogen peroxide using diperiodatoargentate- and diperiodatonickelate-luminol chemiluminescence

A novel chemiluminescence (CL) method for the determination of hydrogen peroxide is described. Method is based on the transition metals in highest oxidation state complex, which include diperiodatoargentate (DPA) and diperiodatonickelate (DPN) and show excellent sensitisation on the luminol-H₂O₂ CL reaction with low luminol concentration in alkaline medium. In particular, the sensitiser which was previously reported (such as Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Fe³⁺, Cr³⁺, KIO₄, K₃Fe(CN)₆ etc.) to be unobserved CL due to poor sensitisation with such low concentration of luminol which makes the method hold high selectivity. Based on this observation, the detection limits were 6.5?×?10^?9?mol?L^?1 and 1.1?×?10^?8?mol?L^?1 hydrogen peroxide for the DPN- and DPA-luminol CL systems, respectively. The relative CL intensity was linear with the hydrogen peroxide concentration in the range of 2.0?×?10^?8–6.0?×?10^?6?mol?L^?1 and 4.0?×?10^?8–4.0?×?10^?6?mol?L^?1 for the DPN- and DPA-luminol CL systems, respectively. The proposed method had good reproducibility with a relative standard deviation of 3.4% (8.0?×?10^?7?mol?L^?1, n?=?7) and 1.0% (2.0?×?10^?6?mol?L^?1, n?=?7) for the DPN- and DPA-luminol CL systems, respectively. A satisfactory result has been gained for the determination of H₂O₂ in rainwater and artificial lake water by use of the proposed method.     

Chemiluminescent detection of cell apoptosis enzyme by gold nanoparticle-based resonance energy transfer assay

We report a new chemiluminescence resonance energy transfer (CRET) technique, using gold nanoparticles (AuNPs) as efficient energy acceptor, for homogeneous measurement of cell apoptosis enzyme with high sensitivity. In the design of the CRET system, we chose the highly sensitive chemiluminescence (CL) reaction between luminol and hydrogen peroxide catalysed by horseradish peroxidase (HRP) because the CL spectrum of luminol (λ _max 425 nm) partially overlaps the visible absorption bands of AuNPs. In this system, the peptide substrate (DEVD) of caspase 3 was linked to the AuNP surface by Au–S linkage. HRP was attached to the AuNP surface by means of a bridge formed by the streptavidin–biotin reaction. CRET occurred as a result of formation of AuNP–peptide–biotin–streptavidin–HRP complexes. The CL of luminol was significantly reduced, because of the quenching effect of AuNPs. The quenched CL was recovered after cleavage of DEVD by caspase 3, an enzyme involved in the apoptotic process. Experimental conditions were systematically investigated. Under the optimum conditions the increase of the CL signal was linearly dependent on caspase 3 concentration within the concentration range 25 pmol L^?1 to 800 pmol L^?1 and the detection limit of caspase 3 was as low as 20 pmol L^?1, one order of magnitude lower than for FRET sensors based on graphene oxides. Our method was successfully used to detect drug-induced apoptosis of cells. This approach is expected to be extended to other assays, i.e., using other enzymes, analytes, CL substances, and even other nanoparticles (e.g., quantum dots and graphene). Fig. a

?     

Poly(2-amino-5-(4-pyridinyl)-1, 3, 4-thiadiazole) film modified electrode for the simultaneous determinations of dopamine, uric acid and nitrite

Poly(2-amino-5-(4-pyridinyl)-1,3,4-thiadiazole) (PAPT) modified glassy carbon electrode (GCE) was fabricated and used for the simultaneous determinations of dopamine (DA), uric acid (UA) and nitrite (NO₂ ^?) in 0.1 mol?L^?1 phosphate buffer solution (PBS, pH 5.0) by using cyclic voltammetry and differential pulse voltammetry (DPV) techniques. The results showed that the PAPT modified GCE (PAPT/GCE) not only exhibited electrocatalytic activities towards the oxidation of DA, UA and NO₂ ^? but also could resolve the overlapped voltammetric signals of DA, UA and NO₂ ^? at bare GCE into three strong and well-defined oxidation peaks with enhanced current responses. The peak potential separations are 130 mV for DA–UA and 380 mV for UA–NO₂ ^? using DPV, which are large enough for the simultaneous determinations of DA, UA and NO₂ ^?. Under the optimal conditions, the anodic peak currents were correspondent linearly to the concentrations of DA, UA and NO₂ ^? in the ranges of 0.95–380 μmol?L^?1, 2.0–1,000 μmol?L^?1 and 2.0–1,200 μmol?L^?1 for DA, UA and NO₂ ^?, respectively. The correlation coefficients were 0.9989, 0.9970 and 0.9968, and the detection limits were 0.2, 0.35 and 0.6 μmol?L^?1 for DA, UA and NO₂ ^?, respectively. In 0.1 mol?L^?1 PBS pH 5.0, the PAPT film exhibited good electrochemical activity, showing a surface-controlled electrode process with the apparent heterogeneous electron transfer rate constant (k _s) of 25.9 s^?1 and the charge–transfer coefficient (α) of 0.49, and thus displayed the features of an electrocatalyst. Due to its high sensitivity, good selectivity and stability, the modified electrode had been successfully applied to the determination of analytes in serum and urine samples.     

Flow-Injection Chemiluminescent Determination of Piroxicam Using Tris (2,2′-bipyridyl) Ruthenium(II)—Potassium Permanganate System

Abstract

A rapid and sensitive chemiluminescence method using flow-injection has been developed for the determination of an analgesic agent drug, piroxicam. The method is based on the chemiluminescence reaction of piroxicam with an acidic potassium permanganate and Ru(bipy)₃ ²⁺. The chemiluminescence intensity is greatly enhanced when quinine sulfate is used as a sensitizer. After optimization of the different experimental parameters, a calibration graph was obtained over a concentration range of 3.0 × 0^?8–3.0 × 0^?5 mol L^?1 with the detection limit of 1.0 × 0^?8 mol L^?1. The relative standard deviation is 1.5% (n = 11) for the determination of 8.0 × 10^?7 mol L^?1 piroxicam. The proposed method was successfully applied to commercial tablets, spiked serum, and urine samples.     

Determination of arsenic(V) in freshwaters by flow injection with luminol chemiluminescence detection

A simple and rapid flow injection (FI) method is reported for the determination of arsenic(V) based on luminol chemiluminescence (CL) detection. The molybdoarsenic heteropoly acid formed by arsenic and ammonium molybdate in the presence of ammonium vanadate in acidic conditions generated chemiluminescence emission via the oxidation of luminol. The limit of detection was 0.15 μg L^?1, with a sample throughput 120 h^?1. A linear calibration graph was obtained over the range 0.15 to 7.5 μg L^?1 (r ² = 0.9989; n = 9) with relative standard deviation (n = 4) in the range 0.8 to 2.5%. Interfering cations were removed by passing the sample through an in-line iminodiacetate chelating column and phosphate (at 0.6 mg L^?1) was removed off-line by magnesium-induced coprecipitation (MAGIC) method. The method was applied to freshwater samples and the results obtained were in reasonable agreement with the results obtained using HGAAS as the reference method.     

Flow-Injection Electrochemiluminescence Detecting Rifampicin Based on Its Sensitizing Effect

Introduction Rifampicin, a semi synthetic compound, is used primarily in the treatment of tuberculosis, and it is also an excellent amistaphyloco antibiotic when used in combination with other antibiotics, so it is very useful clinically.1 Therefore, the determination of rifampicin has attracted much attention. From now on, techniques for the determination of rifampicin have been primarily based on spectrophotometry,2 double-wavelength thin-layer scan,3 chemiluminescence,4 high performance liq…     

Electrochemical Quartz Crystal Impedance Study of Glucose Oxidation on a Nickel Hydroxide Modified Au Electrode in Alkaline Solution

The electrochemical quartz crystal impedance (EQCI) technique has been applied to investigate glucose oxidation on bare and Ni(OH)₂‐modified Au electrodes in 0.2 mol L^?1 KOH aqueous solution. The EQCI responses suggest different contributions of H⁺‐release and OH^?‐incorporation reactions of the Ni(OH)₂‐film redox process in 0.2 mol L^?1 aqueous KOH at different potentials. Glucose adsorption on the Ni(OH)₂‐modified Au electrode was studied. A mechanism for potential cyclic redox process of glucose at Ni(OH)₂‐modified Au electrode is suggested, mainly based on a comparative EQCI analysis with direct glucose oxidation on bare gold and glucose ad‐/desorption on Ni(OH)₂ film.     

A Flow-Based Analytical Procedure for Salbutamol Determination Exploiting Chemiluminescence in a Liquid-Core Waveguide

Abstract

Salbutamol is a bronchodilator whose use is restricted due to its anabolic effects. A flow-based procedure for salbutamol determination based on the inhibition of chemiluminescence of the luminol/hypochlorite system was developed. A flow cell constructed with a liquid-core waveguide was employed to constrain the emitted radiation, minimizing losses during transport to detector. Linear response was observed within 2.5 × 10^?6 and 1.0 × 10^?5 mol L^?1 with a detection limit estimated as 1 × 10^?7 mol L^?1 at the 99.7% confidence level. The coefficient of variation (n = 20), sampling rate, and luminol consumption per determination were estimated as 2.8%, 164 determinations h^?1, and 50 µg, respectively. Results for pharmaceutical samples were in agreement with those obtained by reference procedures at the 95% confidence level.     

Study on Electrochemiluminesce of Ru(bpy3)2+ Immobilized in a Titania Sol‐Gel Membrane

The immobilization of tris(2,2′‐bipyridyl)ruthenium(II), Ru(bpy)₃²⁺, at a glassy carbon electrode was achieved by entrapping the Ru(bpy)₃²⁺ in a vapor deposited titania sol‐gel membrane. The electrogenerated chemiluminescence (ECL) of the immobilized Ru(bpy)₃²⁺ was studied. The Ru(bpy)₃²⁺ modified electrode showed a fast ECL response to both oxalate and proline. The ECL intensity was linearly related to concentrations of oxalate and proline over the ranges from 20 to 700 μmol L^?1 and 20 to 600 μmol L^?1, respectively. The detection limits for oxalate and proline at 3σ were 5.0 μmol L^?1 and 4.0 μmol L^?1, respectively. This electrode possessed good precision and stability for oxalate and proline determinations. The electrogenerated chemiluminescence mechanism of proline system was discussed. This work provided a new way for the immobilization of Ru(bpy)₃²⁺ and the application of titania sol‐gel membrane in electrogenerated chemiluminescence.     

Determination of Nitrite in Aqueous Solutions using the Linear Sweep Voltammetry Technique

ABSTRACT

An electrochemical method using linear sweep voltammetry techniques was developed to determine nitrite ion in aqueous solution in the presence of nitrate. Nitrite solutions exhibited a well-defined oxidation wave at +1.0V vs SCE at vitreous carbon, while no oxidation process was observed for nitrate solutions. The pH of the nitrite solutions varied from 2.37 to 5.60 and no change was observed in the Ep values, except for the pH 5.60 solution, where little change was verified. The potential also did not vary with change in the nitrite concentration in the 5.0 x 10^?5 to 7.0 x 10^?4 mol L^?1 range. Very good straight lines for plots of current versus nitrite concentration in the 7.0 x 10^?5 to 7.0 x 10^?4 mol L^?1 range were obtained; the correlation coefficient was never worse than 0.990. The nitrite determination was also performed in the presence of 1.0 x 10^?3 mol L^?1 of NO₃ ^? ions. The addition of NO₃ ^? did not change significantly the current values even when it was added in one hundred times molar excess.     

Effect of complexones and tensides on selectivity of nitrogen dioxide determination in air with a chemiluminescence aerosol detector

Modification of the luminol solution by means of addition of various complexones and surfactants has been investigated to eliminate interferences from gaseous co-pollutants in the determination of ambient nitrogen dioxide using a chemiluminescence aerosol detector. The simultaneous presence of EDTA and triton X-100 or X-405 together with sulphite and iodide in the luminol solution suppressed interferences from ozone and peroxyacetyl nitrate to a negligible level and no scrubbers or corrections of the NO₂ measurements were needed.

In general, the best composition of the reagent solution included luminol, KOH, Na₂SO₃, KI, Na₂EDTA and triton X-100. From the point of view of selectivity of NO₂ determination, an optimum reagent solution consisted of luminol (0.002 M), KOH (0.5 M), Na₂SO₃ (0.2 M), KI (0.1 M), Na₂EDTA (0.05 M) and triton X-100 (0.5 vol.%). Interferences from ozone (170 ppb (v/v)) and peroxyacetyl nitrate (81 ppb (v/v)) were 0.2 and 1.2%, respectively, for nitrogen dioxide at a concentration of 50 ppb (v/v) and 0.25 and 1.7%, respectively, for 0.5 ppb (v/v) NO₂. The calibration graph was linear for NO₂ concentrations ranging from 3 to 665 ppb (v/v). Below 3 ppb (v/v) NO₂ the detector response to nitrogen dioxide can be fitted with a linear equation of the third order.     

Label-Free Electrochemiluminescent Determination of DNA Using Luminol and Hemin Functionalized Nanoparticles

Luminol and hemin dual-functionalized silica nanoparticles were synthesized using a typical reverse water-in-oil microemulsion protocol. The obtained nanoparticles were further characterized by transmission electron microscopy, scanning electron microscopy, atomic absorption spectrometry, chemiluminescence, and electrochemiluminescence. The results indicated that the luminol and hemin dual-functionalized silica nanoparticles exhibited significantly higher chemiluminescence and electrochemiluminescence intensities than those of luminol functionalized silica nanoparticles due to the catalytic effect of hemin on the chemiluminescence and electrochemiluminescence of luminol. Furthermore, a simple and sensitive label-free electrochemiluminescence DNA biosensor was developed based on the chitosan modified luminol and hemin dual-functionalized silica nanoparticles and a single-stranded DNA probe. The chitosan modified luminol and hemin dual-functionalized silica nanoparticles were immobilized on the surface of an indium-doped tin oxide electrode and the single-stranded DNA probe was immobilized on the surface of the nanoparticles through electrostatic interactions between single-stranded DNA and chitosan, which allowed hybridization with the target DNA sequences. The hybridization events were evaluated by electrochemiluminescence, and only the complementary sequence formed double-stranded DNA with the DNA probe to give strong electrochemiluminescence signals. Finally, the electrochemiluminescence intensity was found to be linearly related to the concentration of the complementary sequence at concentrations from 1.0?×?10^?12 to 1.0?×?10^?6?mol·L^?1 with a detection limit of 5.0?×?10^?13?mol·L^?1.     

Flow‐Injection Chemiluminometric Analysis of Thyroxine Hormone in a KMnO,4‐Na2SO3 System

An analytical method consisting of flow injection sampling and chemiluminescence detection for the determination of thyroxine hormone is described. It is based on the weak chemiluminescent reaction of KMnO₄ ‐ Na₂SO₃ in acidic medium, which is enhanced by the addition of thyroxine hormone. The chemiluminescence intensity was correlated linearly with concentration of thyroxine in the range of 1.0 × 10^?7 – 2.0 × 10^?6 mol L^?1 (r² = 0.9976) with a relative standard deviation (n = 4) in the range of 1.0 – 1.9%. The limit of detection (3σ blank) is 5.0 × 10^?9 mol L^?1 with a sample throughput of 180 h^?1. The method has been applied to the determination of thyroxine in pharmaceutical preparations and the results are in good agreement with the value reported. Metal and non‐metal ions and some organic compounds commonly present in tablets and some amino acids were also studied for thyroxine determination.     

Sensitive Nonenzymatic Electrochemiluminescence Determination of Hydrogen Peroxide in Dental Products using a Polypyrrole/Polyluminol/Titanium Dioxide Nanocomposite

A layer-by-layer assembled of a polypyrrole and polyluminol was synthesized through the electrodeposition of pyrrole and luminol in acidic medium on a graphite electrode. The electrode was then modified by casting titanium dioxide (TiO₂) nanoparticles on its surface for enhancing electrochemiluminescence of luminol. The properties of this electrochemiluminescence sensor were studied by cyclic voltammetry, electrochemical impedance spectroscopy, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. The results demonstrated that the modification of this electrochemiluminescence sensor shows sensitive response for the determination of hydrogen peroxide. Figures of merit include broad linearity from 1?pmol L^?1 to 4?µmol L^?1 (R²?=?0.996) with a limit of detection as low as 0.40?pmol L^?1 at a signal-to-noise ratio of three and good reproducibility with relative standard deviation of 4% for the determination of a 400?nmol L^?1 hydrogen peroxide solution (n?=?4), along with favorable long-term stability. The presence of glucose, citric acid, uric acid, dopamine, and ascorbic acid at concentrations as high as 100?nmol L^?1 of H₂O₂ did not produce any electrochemiluminescence signals, which demonstrates the selective nature of this modified electrode. The sensor was also used for the determination of H₂O₂ in mouthwash formulations and dental whitelight gels.     

A Multicommuted Flow‐based System for Hydrogen Peroxide Determination by Chemiluminescence Detection Using a Photodiode

Abstract

A simple, rapid, and automated assay for hydrogen peroxide in pharmaceutical samples was developed by combining the multicommutation system with a chemiluminescence (CL) detector. The detection was performed using a spiral flow‐cell reactor made from polyethylene tubing that was positioned in front of a photodiode. It allows the rapid mixing of CL reagent and analyte and simultaneous detection of the emitted light. The chemiluminescence was based on the reaction of luminol with hydrogen peroxide catalyzed by hexacyanoferrate(III).

The feasibility of the flow system was ascertained by analyzing a set of pharmaceutical samples. A linear response within the range of 2.2–210 µmol l^?1 H₂O₂ with a LD of 1.8 µmol l^?1 H₂O₂ and coefficient of variations smaller than 0.8% for 1.0×10^?5 mol l^?1 and 6.8×10^?5 mol l^?1 hydrogen peroxide solutions (n=10) were obtained. Reagents consumption of 90 µg of luminol and 0.7 mg of hexacyanoferrate(III) per determination and sampling rate of 200 samples per hour were also achieved.     

Parameters Affecting the Peroxyoxalate Chemiluminescence

ABSTRACT

A careful study of the parameters affecting the chemiluminescent reaction of TCPO (bis(2,4,6-trichlorophenyl)oxalate) and 2-NPO (bis(2-nitrophenyl)oxalate) with hydrogen peroxide, in the presence of imidazole (used as buffer and catalyst) and the fluorophore 3-AFA (3-aminofluoranthene), was carried out in acetonitrile/water medium. The data are reported in terms of the time (t_Imax) required for the relative maximum chemiluminescence intensity (I_max) and the area (A) under the curve of intensity νs. time. At controlled acidity and high unprotonated imidazole concentration ([IMI] = 1x10^?2 mol.L^?1), the I_max and t_Imax values do not depend on the acetonitrile/water ratio. The CL intensity is maximum at around pH 6.0 (higher buffer capacity). For 1x10^?2 < [IMI] < 1x10^?4 mol.L^?1, the area is largest when [IMI] = 1x10^?3 mol.L^?1 and linearly dependent on the hydrogen peroxide concentration (10^?5 ? 10^?3 mol.L^?1). The area is also enhanced by increasing the fluorophore concentration. The acidity controls the unprotonated imidazole and H⁺ concentration. Several errors can arise from quantitative analyses carried out without control of the HIMI⁺ and IMI concentrations.     

Meldola's Blue Immobilized on a SiO2/SnO2/Phosphate Xerogel,a New Sensor for Determination of Ascorbic Acid in Medicine and Commercial Fruit Juice

A modified carbon paste electrode with SiO₂/SnO₂/Phosphate/Meldola's blue, SSPMelB, was used to study the electrocatalytic oxidation of ascorbic acid by cyclic voltammetry and chronoamperometry. The adsorbed dye mediates ascorbic acid oxidation at an anodic potential of 0.04 V vs. saturated calomel electrode (SCE) at pH 7.0, in 0.5 mol L^?1 solution. The linear range of the sensor is between 4.0×10^?7 and 2.0×10^?3 mol L^?1, with a limit of detection of 4.0×10^?7 mol L^?1. This novel electrode shows good analytical performance for determination of ascorbic acid in medicine and commercial fruit juice.     

Transport properties of ZrV2O7-V2O5 composites with liquid-channel grain boundary structure

Transport properties (conductivity, transport numbers of oxygen ions, oxygen permeability) are studied for new composites of ZrV₂O₇-25, 30, 35, 40 mol % of V₂O₅ with a liquid-channel grain boundary structure (LGBS) at 680–740°C. It is shown that the composite of ZrV₂O₇-40 mol % of V₂O₅ with LGBS has high selective oxygen permeability of 1.1 × 10^?8 mol cm^?2 s^?1 (T = 740°C, $P'_{O_2 } $ = 0.21 atm, $P''_{O_2 } $ = 0.003 atm, L = 2 mm) and can be used as an ion-transport membrane for separation of oxygen from air.