Synthesis,characterization, and dyeing performance of some azo thienopyridine and thienopyrimidine dyes based on wool and nylon

A string of novel heterocyclic mono azo dyes were synthesized and their utilization in dyeing different fabrics as wool and nylon were discussed. Thienopyridine azo dyes 4 and 6 were prepared by reaction of chloro acetamidederivative 2 with diamino compounds to yield 3 and 5 , followed by reaction with NaNO₂/HCl and coupling with nucleophilic reagent. One-pot reaction of chloro acetamide 2 with ammonium thiocyanat in solvent ethanol gave the unexpected thienopyrimidine derivative 7 , which contain two active sites, the former is primary amine that was able to form diazonium salt that coupled with N,N-dimethylaniline, resorcinol, and/or self-coupling to afford the azo dyes 8-10 , and the latter is active methylene group that underwent coupling with different diazonium salts to give the azo thienopyrimidine derivative dye 11-15 . The dyeing performance of these azo dyes had been investigated in terms of their dyeing behavior and fastness properties on different fabrics. Results showed that the color strength (K/S) values, as well as, washing, rubbing, and resistance to acid, alkali and light showed high efficiency of these heterocyclic mono azo dyes to dye wool rather than nylon fibers.     

UV-Spectrometric Determination of Total Phenols Using Diazotized Sulfanilic Acid

Phenolic compounds, including nitro- and chlorophenols, in neutral aqueous solutions react with diazotized sulfanilic acid. The molecular absorption coefficients of azo dyes obtained from various phenols in the range 360?380 nm are quite close, which ensures the determination of the total concentration of phenols as C₆H₅OH. Under optimized conditions, the systematic errors in the analysis of model mixtures did not exceed 30 rel. %. They may be due to either the difference in molar absorption coefficients, or the delayed formation or instability of some azo dyes, and also due to the influence of reducing agents and arylamines. The procedure may become a good alternative to the determination of the phenolic index of sewage waters by the reaction with 4-aminoantipyrine.     

Sustainable synthesis of [1]benzopyran azo dyes using CuCr2O4 NPs

In this study, copper chromite nanoparticles (CuCr₂O₄ NPs) were prepared by a simple hydrothermal method. This nanomaterial was found as an efficient heterogeneous catalyst for the synthesis of a new class of [1]benzopyran azo dyes via pseudo-three-component reaction of (E)-1,2-diphenyl-1-diazene with 4-hydroxycoumarin in the ratio 1:2. The aim of the present work was to provide a practical and high yielding protocol that offers several advantages such as simple procedure with an easy work-up, mild reaction conditions, and the use of CuCr₂O₄ NPs as an efficient and easily recoverable catalyst.     

Synthesis and solvatochromism study of some new 4-(benzyloxy)-2-((4-aryl)diazenyl)phenols

A series of novel azo disperse dyes were synthesized by coupling reaction of 4-benzyloxyphenol with diazotized p-substituted aniline derivatives as diazo components.These compounds were characterized by spectroscopic techniques and elemental analysis. Ionization constants,pK_a,for these dyes were determined using electronic spectroscopic method.     

Fullerene‐Catalyzed Reduction of Azo Derivatives in Water under UV Irradiation

Metal‐free fullerene (C₆₀) was found to be an effective catalyst for the reduction of azo groups in basic aqueous solution under UV irradiation in the presence of NaBH₄. Use of NaBH₄ by itself is not sufficient to reduce the azo dyes without the assistance of a metal catalyst such as Pd and Ag. Experimental and theoretical results suggest that C₆₀ catalyzes this reaction by using its vacant orbital to accept the electron in the bonding orbital of azo dyes, which leads to the activation of the N?N bond. UV irradiation increases the ability of C₆₀ to interact with electron‐donor moieties in azo dyes.     

Azo dyes degradation using TiO2-Pt/graphene oxide and TiO2-Pt/reduced graphene oxide photocatalysts under UV and natural sunlight irradiation

The photocatalytic degradation of azo dyes with different structures (amaranth, sunset yellow and tartrazine) using TiO₂-Pt nanoparticles (TPt), TiO₂-Pt/graphene oxide (TPt-GO) and TiO₂-Pt/reduced graphene oxide (TPt-rGO) composites were investigated in the presence of UV and natural sunlight irradiation. The composites were prepared by a combined chemical-thermal method and characterized by Transmission Electron Microscopy (TEM), X-ray powder diffraction (XRD), Infrared (FTIR) and UV–Vis spectroscopy. The modification of TiO₂-Pt with graphene oxide shifted its optical absorption edge towards the visible region and increased its photocatalytic activity under UV and natural sunlight irradiation. The efficiency of catalysts on azo dyes degradation (in similar conditions) reached high values (above 99%) under sunlight conditions, proving the remarkable photocatalytic activities of obtained composites. TPt-GO nanocomposite exhibited higher photoactivity than TPt or TPt-rGO, demonstrating degradation efficiencies of 99.56% for amaranth, 99.15% for sunset yellow and 96.23% for tartrazine. The dye photodegradation process follows a pseudo-first-order kinetic with respect to the Langmuir-Hinshelwood reaction mechanism. A direct dependence between azo dyes degradation rate and chemical structure of dyes has been observed.     

Synthesis of Novel and Thermally Stable Water Insoluble Coumarin‐based Azo Dyes via a Mild and Green Procedure

A series of novel azo coumarin dyes were synthesized by the diazotization of 7‐amino coumarins in the presence of catalytic amounts of tungstate sulfuric acid (TSA) followed by coupling with phenol derivatives. Tungstate sulfuric acid catalyzes this reaction at room temperature and short reaction time with high yields.     

Synthesis of azobenzenes: the coloured pieces of molecular materials

Azobenzenes are ubiquitous motifs very important in many areas of science. Azo compounds display crucial properties for important applications, mainly for the chemical industry. Because of their discovery, the main application of aromatic azo compounds has been their use as dyes. These compounds are excellent candidates to function as molecular switches because of their efficient cis-trans isomerization in the presence of appropriate radiation. The classical methods for the synthesis of azo compounds are the azo coupling reaction (coupling of diazonium salts with activated aromatic compounds), the Mills reaction (reaction between aromatic nitroso derivatives and anilines) and the Wallach reaction (transformation of azoxybenzenes into 4-hydroxy substituted azoderivatives in acid media). More recently, other preparative methods have been reported. This critical review covers the various synthetic methods reported on azo compounds with special emphasis on the more recent ones and their mechanistic aspects (170 references).     

Ionic liquid 1-(3-Trimethoxysilylpropyl)-3-methylimidazolium nitrite as a new reagent for the efficient diazotization of aniline derivatives and in situ synthesis of azo dyes

A new ionic liquid 1-(3-trimethoxysilylpropyl)-3-methylimidazolium nitrite was synthesized. This ionic liquid was used as a convenient nitrosonium source in diazotization of arylamines into their corresponding diazonium salts which were converted into their related azo dyes via the in situ azo-coupling with aniline derivatives or phenolic compounds. The diazotization of anilines in this ionic liquid and subsequent azo-coupling generated the related azo dyes in good to excellent yields at 0?C5 °C in short reaction times via a simple experimental procedure.     

Synthesis and evaluation of a series of symmetrical hot brand bis azo reactive dyes using 4,4′-methylene-bis-metanilic acid on various fibre

4,4′-Methylene-bis-metanilic acid (A) was synthesized by the reaction between metanilic acid and formaldehyde. The compound (A) was used as a bifunctional middle component in the preparation of several symmetrical hot brand bis azo reactive dyes. The compound (A) was tetrazotized and coupled with various m-nitro anilino cyanurated coupling component to give various hot brand bis azo reactive dyes. The entired compounds have been identified by IR, ¹H NMR spectra and elemental analysis. The dyes were applied on silk, wool and cotton fabrics and their fastness properties were evaluated. All the dyes give good fastness properties. The percentage dye bath exhaustion was also been studied.     

Synthesis and spectral characterization of some new azo dyes and their metal complexes

A series of azo-metal chelate dyes have been synthesized by coupling substituted o-nitroaniline and p-t-/s-butylphenol. The spectral characterization of the azo dyes containing o-hydroxy group and azo-metal(II) chelate [metal(II): Cu, Ni, Co] dyes by IR spectra, UV–VIS spectra, NMR spectra, elemental analysis and magnetic susceptibility techniques are reported. The stoichiometry of the azo-metal chelates was determined by the spectroscopic titration method to be 1:2 (ML₂).     

聚苯乙烯基偶氮聚合物的合成研究

改进了聚苯乙烯的硝化、还原、重氮化和偶合反应路线 (NRDC) ,使每步反应都得到很高的产率 ,并利用大分子重氮盐 (MDS)分别与苯胺、N 烃基苯胺和酚等三类化合物偶合 ,得到相应的聚苯乙烯基偶氮聚合物 .核磁共振分析结果证明了产物的高偶联率 .通过对大分子重氮盐热稳定性的研究 ,发现偶合反应之后需要一步加热反应以消除残余重氮基团 .还研究了这些聚合物的紫外 可见吸收光谱性质 ,氨 (胺 )基偶氮产物的水溶液表现出了明显的pH敏感性     

A Novel Kinetic Approach for Photocatalytic Degradation of Azo Dye with CdS and Ag/CdS Nanoparticles Fixed on a Cement Bed in a Continuous‐Flow Photoreactor

Azo dyes are one of the synthetic dyes that have been used in many textile industries. Azo dye and their intermediate products are toxic, carcinogenic, and mutagenic to aquatic life. Removal of azo dyes is one of the main challenges before releasing the wastes discharged by textile industries. Photocatalytic degradation of azo dyes by nanoparticles is one of the environment‐friendly methods used for the removal of dyes from textile effluents. Therefore, this study focused on degradation of azo dye, Direct Red 264. Photocatalytic degradation of DR 264 azo dye was investigated using CdS and Ag/CdS nanoparticles immobilized on a cement bed in a continuous‐flow photoreactor under UV‐C exposure. The effect of the parameters of type and mass of catalyst, temperature, flow rate, dye concentration, and light intensity were evaluated for azo dye removal. Under optimal conditions, photocatalytic degradation of DR 264 azo dye using Ag/CdS nanoparticles immobilized on a cement bed in a continuous‐flow photoreactor obtained an efficiency of 99.99%. A developed kinetic model was proposed based on the intrinsic elementary reactions. The proposed model is in a good agreement with the Langmuir–Hinshelwood (L–H) equation. The pseudo–steady‐state approximation has considered for the concentration of hydroxyl radicals associated with the L–H model under certain conditions and explains consistently the dependence of the apparent kinetic parameter, k_obs (the reaction rate constant), and K_R (the adsorption equilibrium constant) with the light intensity. Based on the model, k_obs for Ag/CdS was greater than the CdS nanoparticles.     

Environmentally green approach to synthesize azo dyes based on 1-naphthol using nano BF3·SiO2 under solvent-free conditions

A series of azo dyes were efficiently synthesized by mixing aromatic amines and NaNO₂ in the presence of nano silica supported boron trifluoride (nano BF₃·SiO₂) and then diazo coupling with 1-naphthol under solvent-free conditions at room temperature. The present methodology has proven to be simple, rapid, environmentally benign, green, and cost-effective compared with previous synthetic methods. Also, by using this procedure, aryl diazonium salts supported on nano BF₃·SiO₂ were very stable to be kept at room temperature for several months without any special conditions.     

Surface modification of inorganic oxide particles with silane coupling agent and organic dyes

The silane coupling agent 3‐glycidoxypropyl trimethoxylsilane (GPS) was grafted onto the surface of silica gel, P ₂ glass beads and TiO ₂ oxide particles. FT‐IR, thermogravimetric and elemental analysis were used to characterize the modified particles. The effects of various factors on the GPS grafting efficiency such as catalyst, GPS concentration, reaction temperature and time were studied. After modification with GPS, the xanthene dye rhodamine B and azo dyes 4‐phenylazophenol and 4‐phenylazoaniline, respectively, were grafted on to the particles, which were then used as pigment fillers. The colors of the pigments were adjusted by changing the kind of dyes, the concentration, the pH and the reaction solvents. Copyright © 2001 John Wiley & Sons, Ltd.     

A new spectrophotometric method for the determination of nadolol

A new spectrophotometric method has been developed for the assay of nadolol in pure form and in tablets. The assay procedure is based on a derivatization methodology employing 4-carboxyl-2,6-dinitrobenzene diazonium ion (CDNBD) as a diazo coupling reagent. The azo dye formed between nadolol and CDNBD absorbed visible light at the wavelength maximum of 416 nm (λ_max) demonstrating a bathochromic shift from the absorption maximum of nadolol. Optimization studies established an optimal reaction time of 10 min at 60 °C. The assays were linear over 1.25–10 μg ml^?1 of nadolol, and the reaction occurred by a 3:1 reagent/drug stoichiometric ratio. The method is found to be selective and has a lower detection limit of 0.29 μg ml^?1. Recovery studies over three days gave mean recovery of 101.4% (RSD 3.0%). This new method has been successfully applied in the determination of nadolol and nadolol/bendroflumethiazide tablets with accuracy and precision similar to the official (USP) HPLC procedure (p > 0.05). The new procedure has the advantages of high sensitivity, lower limit of detection and could find application as an in-process quality control method for nadolol.     

Synthesis,Characterization, and Fluorescence Studies of Novel Heterocyclic Azo Dyes Derived from Benzothiazole

Ten novel fluorescent azo disperse dyes 2a – e (open forms) and 3a – e (closed forms) were obtained by the coupling reaction of carbocyclic amine based diazonium chloride with compounds 2 and 3 . The synthesized dyes were characterized by elemental analysis, high‐resolution mass spectrometry, Fourier transform infrared, and NMR spectral techniques. Moreover, we investigated the substituent effect and solvatochromic properties of the dyes on absorption and fluorescence spectra. At the same time, the absorption and emission spectral data of the closed form dyes 3a – e were compared with the open form dyes 2a – e due to more planarity of the closed form dyes that lead to the extension of the π–electron conjugation.     

Photoinduced,Direct C(sp2)−H Bond Azo Coupling of Imidazoheteroarenes and Imidazoanilines with Aryl Diazonium Salts Catalyzed by Eosin Y

Herein, a greener approach to the eosin Y-Na₂ catalyzed, C(sp²)−H bond azo coupling of imidazoheteroarene with aryl diazonium salts is described, under acid free conditions. This direct photoredox process resulted in the corresponding azo products in good to excellent yields. Besides, this new approach could also be applicable to anilines, which is a poorly reactive substrate by other methods. The main features of this reaction are that it provides high yields and is gram-scalable and applicable to biologically relevant imidazoheteroarenes and -anilines.     

Antimicrobial activities and absorption properties of disazo dyes containing imidazole and pyrazole moieties

The newly synthesized thirteen disazo dyes containing imidazole and pyrazole cycles (3a-3m) were carried out by diazotization reaction of 5-amino-4-arylazo-3-methyl-1H-pyrazoles (2a-2m) and coupling reaction with 1-methyl imidazole. Structures of synthesized azo dyes were characterized by UV–Vis, FT-IR, ¹H-NMR, elemental analysis and their solvatochromic properties were studied in DMSO, DMF, methanol, acetic acid and chloroform. In addition, the antimicrobial activities of dyes against twelve pathogenic bacteria were examined in detail and all dyes showed antimicrobial activity against different bacterial strains.     

Waste-Free Solid-State Organic Syntheses: Solvent-Free Alkylation,Heterocyclization, and Azo-Coupling Reactions

Summary. Solid-state techniques allow for waste-free quantitative syntheses. The solid–solid reactions of α-haloketones with several pyrazolones and with thiosemicarbazones were shown to afford the corresponding pyrazolyl ethers and 4-substituted 2-(arylidenehydrazino)thiazoles. The product yields are quantitative in all cases and the products do not require purifying workup. Therefore, these reactions are truly solvent-free, sustainable, and no wastes are produced. A diazonium nitrate is quantitatively accessible by gas–solid reaction of the corresponding amine with NO₂ gas. It is a useful material for environmental synthesis of azo dyes through solid-state coupling with a variety of coupling compounds, as e.g. β-naphthol, acetoacetanilide, pyrazolones, and barbituric acid.