等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

Stable Structure and Characteristic Spectroscopy of(CH3COCH3)n(n=1～7)Clusters

The stable acetone molecule clusters have been studied by using Beeke's threeparameter(B3LYP)density functional theory(DFT)with standard 6-31G(d)basis set.The calculated results show that the optimal structures of acetone clustets are cyclic and the cycles become larger and larger with the increase of cluster size.The strongest vibration peaks for neutral clusters are C=O stretching vibration.The C=O stretching peaks of cyclic acetone clusters split into double ones when n≥3,the frequencies are red-shifted and corresponding intensities increase with the increase of cluster size.     

用密度泛函方法研究质子化苯基丙酮-水团簇

The structure and growth trend of the protonated acetophenone-water clusters have been investigated using the DFT-B3LYP method combined with the standard 6-31+G(d,p) basis set. In order to obtain more accurate single-point energy the B3LYP/6-311++G(3df,2p) method was adapted. The results show that the formation of H+C8H8O-H2O is a barrierless reaction process and the equilibrium distance between the proton and the O atom in C8H8O molecule is 1.015 A. For H+C8H8O-(H2O)n(n=1,2,3) clusters, the proton lies between the acetophenone molecule C8H8O and the water molecule H2O. The distance between the proton and the O atom of the C8H8O molecule increased from n=1 to n=3; C8H8O-H+-H2O can be regarded as an solvation shell. For H+C8H8O (H2O)n (n=4,5,6,7,8) clusters, the proton lies between the two H2O molecules forming a H5O2+ structure, C8H8O-H5O2+ is an important structure, which the other H2O molecules will attack from different sides.     

N-甲替甲酰胺-水的氢键团簇的从头计算研究

The N-methylformamide（NMF）-water clusters were studied by ab inito calculations at MP2/6-31+G** and MP2 / 6-311 ++ G（d,p）levels. The equilibrium geometries and the dissociation channels and dissociation energies of both neutral and ionic NMF-H2O clusters are presented. For N-methylformamide,cis-form has lower energy than trans-form. In NMFH+,the proton prefers to link with the O atom of N-methylformamide. The results show that both cis- and trans- form of NMF can form a linear hydrogen bond with water. Although the energy of trans-NMF is higher than cis-NMF,trans-form exits more stably because it can form a double hydrogen bond with water. After the ionization of the NMF-H2O cluster,both the cis- and the trans-form will produce protonated products.     

氨和甲醇团簇中的质子转移反应

应用激光多光子电离质谱和分子束技术研究了氨和甲醇二元团簇,实验观测到两个系列质子化的团簇离子: (CH3OH)nH+和(CH3OH)nNH4+(1≤n≤14 ),其产生是经过二元团簇内的质子转移反应。同时也研究了氘代甲醇CH3OD和氨混合团簇,结果表明OD原子团中的D转移概率比CH3原子团中的质子转移概率大几倍。在HF/STO-3G和MP2/6-31G*　*水平上对氨和甲醇二元团簇进行了计算,结果表明与CH3相比OH中的质子转移更加容易,因为CH3中的质子转移过程要克服高度约120 kJ/mol的能垒。     

氟丙烯在高温下的热稳定性

用单脉冲激波管研究了全氟丙烯C3F6的分解。使用H2作为清扫剂。产物包括 CH4、 C2F4、 CF3H和C2F3H,作为对断键反应过程的指示。C3F6的断键反应为 C3F6  CF3+C2F3 （1） 得到其速率常数表达式为 k（C3F6  CF3+C2F3)=10(17.4±0.2)exp-(355300±8360)/(RT) s-1 温度范围为1090 K相似文献   

Chiral recognition in diaziridine clusters and the problem of racemization waves

Theoretical calculations (B3LYP/6-31+G**) of chiral clusters of diaziridines have been carried out. Five configurations of chiral and nonchiral clusters with up to eight monomers have been considered. The proton transfer within the neutral and protonated clusters has been studied as a possible source of racemization waves. The optical rotatory power (ORP) has been calculated for the neutral and protonated homochiral clusters. The results show that the clusters with alternated chiral molecules are the preferred ones and that the proton transfer proceeds with low energetic barriers in the protonated systems. The ORP results are very dependent on the shape of the clusters and the neutral or protonated state of them.     

A theoretical investigation of the plausibility of reactions between ammonia and carbonyl species (formaldehyde, acetaldehyde, and acetone) in interstellar ice analogs at ultracold temperatures

We have reexamined the reaction between formaldehyde and ammonia, which was previously studied by us and other workers in modestly sized cluster calculations. Larger model systems with up to 12H(2)O were employed, and reactions of two more carbonyl species, acetaldehyde and acetone, were also carried out. Calculations were performed at the B3LYP/6-31+G** level with bulk solvent effects treated with a polarizable continuum model; limited MP2/6-31+G** calculations were also performed. We found that while the barrier for the concerted proton relay mechanism described in previous work remains modest, it is still prohibitively high for the reaction to occur under the ultracold conditions that prevail in dense interstellar clouds. However, a new pathway emerged in more realistic clusters that involves at least one barrierless step for two of the carbonyl species considered here: ammonia reacts with formaldehyde and acetaldehyde to form a partial charge transfer species in small clusters (4H(2)O) and a protonated hydroxyamino intermediate species in large clusters (9H(2)O, 12H(2)O); modest barriers that decrease sharply with cluster size are found for the analogous processes for the acetone-NH(3) reaction. Furthermore, if a second ammonia replaces one of the water molecules in calculations in the 9H(2)O clusters, deprotonation can occur to yield the same neutral hydroxyamino species that is formed via the original concerted proton relay mechanism. In at least one position, deprotonation is barrierless when zero-point energy is included. In addition to describing the structures and energetics of the reactions between formaldehyde, acetaldehyde, and acetone with ammonia, we report spectroscopic predictions of the observable vibrational features that are expected to be present in ice mixtures of different composition.     

Ion-molecule chemistry within boron tribromide clusters: experiment and theory

Molecular clusters of BBr3 were subjected to electron ionization and mass analysis in a reflectron time-of-flight mass spectrometer. Five series of cluster ions were observed, with formulas corresponding to each of the possible fragment ions of BBr3 being solvated by neutral BBr3 molecules. Geometry optimizations on the observed cluster ions using density functional theory (B3LYP/6-31G*) predict that fragment ions smaller than BBr3+ undergo reactions with neutral BBr3 molecules to form covalently bound adduct species that function as core ions within the clusters. Once all boron atoms are saturated, the reactions cease, and larger cluster ions consist of BBr3 molecules loosely bound to the core ions. Divalent bromine atoms are present in at least three of the cluster ions, and most of the intermolecular contact within the clusters is between Br atoms. Enthalpies of formation, addition reactions, and BBr3 elimination from the cluster ions were derived from B3LYP and MP2 calculations at the B3LYP/6-31G* geometries using both the 6-31G* and the 6-311++G(2df,2p) basis sets. The results are compared to limiting expectations based on known bulk thermochemistry.     

Density functional and multiphoton ionization studies of N,N-dimethylformamide–(methanol)n clusters

The multiphoton ionization of the hydrogen-bonded clusters N,N-dimethylformamide–(methanol)_n (DMF–(CH₃OH)_n) was studied using a time-of-flight mass spectrometer at the wavelengths of 355 and 532 nm. At both wavelengths, a series of protonated DMF–(CH₃OH)_nH⁺ ions was obtained. The clusters were also investigated by density functional theory B3LYP method in conjunction with basis sets 6-31+G(d,p) and 6-311+G(2d,p). Equilibrium geometries of both neutral and ionic DMF–CH₃OH clusters, and dissociation channels and dissociation energies of the ionic clusters are presented. The results show that when DMF–CH₃OH is vertically ionized and dissociated, DMFH⁺ and CH₃O are the dominant products via proton transfer reaction. A high energy barrier makes another channel corresponding to the production of DMFH⁺ and CH₂OH disfavored. In the DMF–(CH₃OH)H⁺ ion, the proton prefers to link with the O atom of DMF molecule. Variation of atomic charges during proton transfer in hydrogen bond of the protonated cluster DMF–(CH₃OH)H⁺ ion is also discussed.     

One water molecule stabilizes the cationized arginine zwitterion

Singly hydrated clusters of lithiated arginine, sodiated arginine, and lithiated arginine methyl ester are investigated using infrared action spectroscopy and computational chemistry. Whereas unsolvated lithiated arginine is nonzwitterionic, these results provide compelling evidence that attachment of a single water molecule to this ion makes the zwitterionic form of arginine, in which the side chain is protonated, more stable. The experimental spectra of lithiated and sodiated arginine with one water molecule are very similar and contain spectral signatures for protonated side chains, whereas those of lithiated arginine and singly hydrated lithiated arginine methyl ester are different and contain spectral signatures for neutral side chains. Calculations at the B3LYP/6-31++G** level of theory indicate that solvating lithiated arginine with a single water molecule preferentially stabilizes the zwitterionic forms of this ion by 25-32 kJ/mol and two essentially isoenergetic zwitterionic structure are most stable. In these structures, the metal ion either coordinates with the N-terminal amino group and an oxygen atom of the carboxylate group (NO coordinated) or with both oxygen atoms of the carboxylate group (OO coordinated). In contrast, the OO-coordinated zwitterionic structure of sodiated arginine, both with and without a water molecule, is clearly lowest in energy for both ions. Hydration of the metal ion in these clusters weakens the interactions between the metal ion and the amino acid, whereas hydrogen-bond strengths are largely unaffected. Thus, hydration preferentially stabilizes the zwitterionic structures, all of which contain strong hydrogen bonds. Metal ion size strongly affects the relative propensity for these ions to form NO or OO coordinated structures and results in different zwitterionic structures for lithiated and sodiated arginine clusters containing one water molecule.