阴极电泳涂料用颜料分散树脂及颜料浆的研制

采用多异氰酸酯制备一种季铵化剂,该季铵化剂和环氧树脂反应制备含有季铵盐基团的阳离子颜料分散树脂及颜料浆。本文研究了TDI单体类型、环氧树脂分子量、IO封闭TDI摩尔比例对颜料分散树脂水溶性、分散性及颜料浆稳定性的影响,并对颜料分散树脂和颜料浆的性能进行测试,结果表明:该颜料分散树脂对颜料具有优异的分散效果;该颜料分散树脂和常见颜料分散研磨而成的颜料浆贮存稳定性、施工稳定性性能优异,该产品具有良好的市场应用前景。     

水性颜料体系无树脂色浆的制备与应用

中性墨水属于热力学上不稳定的颜料悬浮体系,选择低黏度、高稳定性的色浆是保证墨水体系分散稳定性的重要手段之一.基于此,以颜料炭黑和酞菁蓝为着色剂,配合超分散剂(EK43)与协同增效剂(BM10),制备了两款适用于中性墨水体系的无树脂色浆.首次从色浆粒径与体系分散稳定性角度出发,确定了EK43、BM10用量以及最佳研磨时间...     

有机颜料酞菁蓝微胶囊的原位微悬浮法制备及其表征

通过简单的超声分散及强力剪切将滤饼中的有机颜料颗粒以初级粒子形式均匀稳定地分散到单体分散液和微悬浮液中的单体小液滴内,经有机颜料单体分散液的预聚处理和原位微悬浮聚合制备得到一系列具有高颜料包裹率和窄粒径分布特点的微米级聚合物胶粒.实验观察和粒径分析DLS证明,预聚处理可明显提高微悬浮体系中单体液滴相的黏度,因而可有效改...     

高分子型炭黑分散剂的合成及其性能研究

研究了嵌段型分分子颜料分散剂的合成及其有炭黑分散体系中的分散稳定作用。结果表明，高分子嵌段分散剂在炭黑分散体系中能明显改善分散稳定性。同时发现，嵌段分散剂的组成、结构及分子量对分散作用有综合影响。     

水溶性分散剂的合成及其性能研究

合成了苯乙烯－顺丁烯二酸酐共聚型水溶性分解剂，并讨论了这种分散剂对导电粉及炭黑等难分散颜料的分散稳定性作用。结果表明，在水介质中，该发散剂能明显改善导电粉和炭黑颜料的分散稳定性。     

紫外光固化油墨中的颜料分散

１引言九十年代以来,印刷油墨行业受到来自环境保护的压力越来越大。辐射固化油墨（其中ＵＶ固化占９０％）的研究和应用出现了日新月异、迅猛发展的良好势头。紫外光固化油墨较之传统油墨固化迅速、能耗低,可用于对热敏感的基材,固化产品性能优越,最重要的是无溶剂挥发造成的环境污染,是面向二十一世纪的绿色工业技术！”。紫外光固化油墨中的颜料分散与传统油墨类似,但油墨本身成本高低与组分及其配比关系极大,其中如何选择颜料、分散助剂,如何调整分散工艺是控制成本的关键技术。１．１影响颜料分散的因素油墨中颜料分散的情况,…     

聚合物分散剂中锚定基团含量对颜料紫23分散性能影响

聚合物分散剂主要通过锚定基团吸附在颜料表面而起到稳定作用,锚定基团含量会影响到分散剂的吸附效果,进一步影响到颜料的稳定。本文采用溶液聚合法以苯乙烯和端羟基聚乙二醇甲基丙烯酸酯(HO-PEG-MA)为原料,通过改变两者的加入比例来制备不同含量苯基为锚定基团的聚合物分散剂,用于有机颜料紫23的分散稳定,并对研磨后色浆的粒径、吸附量、储存稳定性等进行了测试。结果表明,苯乙烯和端羟基聚乙二醇甲基丙烯酸酯加入的摩尔比为3:1时,稳定效果最好,研磨后粒径可达到为191.3 nm,且储存稳定效果好。     

涂布加工纸用分散剂

YH分散剂是一种有机分散剂。它对纸张涂布所用的各种无机颜料(如瓷土、碳酸钙、硫酸钡或混合颜料)均有良好的分散效果,与颜料浆中其他各种添加成分有良好的相容性。在配制颜料浆时,只需加颜料重量的(0.4-0.8)%的分散剂,就可以使颜料具有良好的流动性。尤其是当颜料浆中固体含量高达60-70%时,用一般无机磷酸盐分散剂已无能为力,而且YH分散剂仍能制得符合涂布工艺要求的均匀颜料浆。     

微波消解样品-电感耦合等离子体质谱法测定有机颜料中重金属元素

颜料是一类具有装饰和保护双重作用的有色物质,通常是以细微粒子的分散形式应用于涂料、油墨、塑料、橡胶、纺织品、纸张、建材、搪瓷、食品用具等制品中。随着颜料工业的快速发展,颜料的质量安全问题不断显现,特别是颜料中重金属污染问题[1]。无机颜料中重金属检测的前处理方法一般采用湿法消解,而有机颜料难溶于水,无法采用湿法消解,采用干法消解又容易引起铅等元素的不确定性损失。本工作采用微波消解-电感耦合等离子体质谱     

电泳显示微胶囊的制备和性能

以有机颜料联苯胺黄为显色粒子, 四氯乙烯和甲苯混合溶液为分散介质, 油溶性蓝N为吸光染料, 用超分散剂CH-2C分散颜料粒子, 脲醛树脂为壁材, 通过一步原位聚合法制备了电泳显示微胶囊. 通过显微镜检查微胶囊的表面形貌及粒径, 并对微胶囊内颜料粒子的电场响应特性和显示性能进行考察. 结果表明, 所得微胶囊表面光滑, 囊壁透明, 囊内颜料粒子对电场变化能够快速可逆地响应, 并具有双稳显示特性.     

Adsorption of comb copolymers on weakly attractive solid surfaces

In this work continuum and lattice Monte Carlo simulation methods are used to study the adsorption of linear and comb polymers on flat surfaces. Selected polymer segments, located at the tips of the side chains in comb polymers or equally spaced along the linear polymers, are attracted to each other and to the surface via square-well potentials. The rest of the polymer segments are modeled as tangent hard spheres in the continuum model and as self-avoiding random walks in the lattice model. Results are presented in terms of segment-density profiles, distribution functions, and radii of gyration of the adsorbed polymers. At infinite dilution the presence of short side chains promotes the adsorption of polymers favoring both a decrease in the depletion-layer thickness and a spreading of the polymer molecule on the surface. The presence of long side chains favors the adsorption of polymers on the surface, but does not permit the spreading of the polymers. At finite concentration linear polymers and comb polymers with long side chains readily adsorb on the solid surface, while comb polymers with short side chains are unlikely to adsorb. The simple models of comb copolymers with short side chains used here show properties similar to those of associating polymers and of globular proteins in aqueous solutions, and can be used as a first approximation to investigate the mechanism of adsorption of proteins onto hydrophobic surfaces.     

Preparation and characterization of polyaniline blends with polyvinyl acetate,polystyrene and polyvinyl chloride for toxic gas sensors

The conditions of processing and gas sensing of ­polyaniline (PANi) blends with polyvinyl acetate (PVAc), polystyrene (PS) and polyvinyl chloride (PVC) were investigated. Flexible, free‐standing and stretchable films of various blends compositions were obtained by casting. The mechanisms of the conducting blends response to a selection of gases and vapours were investigated using two techniques: measurement of conductance and mass changes using a four‐point probe method and X‐ray fluorescence (XRF) device, respectively. These responses to toxic gases and vapours are better explained by polymer blends than homopolymers. Prepared films were exposed to hydrogen halides, hydrogen cyanide, halogens, monochloroacetic acid (MCAA), 1‐3‐5 trichloromethyl benzene (TCMB), methylbenzyl bromide (MBB), bromoacetone (BA) and cyanogen bromide (CB). The changes in conductivity of various polymer frequently observed are partly due to one stage in the two‐stage sorption perhaps involving the swelling of the polymer and then diffusion of gases into polymer chains. The swelling of polymers is a slow process, therefore, we have pre‐swelled polymer films which tend to decrease the response times of blends in respect to gases. The structures of the blends are examined by STA (TGA & DSC) and SEM studies. Copyright © 2001 John Wiley & Sons, Ltd.     

Molecular weight distribution of metallocene polymerization with long chain branching using a binary catalyst system

In metallocene polymerization, termination by β-hydride elimination generates polymer chains containing unsaturated vinyl groups at their chain ends. Further polymerization of these macromonomers produces branched polymers. Material properties of the branched polymers not only depend on molecular weight and branching density, but also on chain structure. This work presents analytical expressions to predict the bivariate distribution of molecular weight and branching density for polymer chains having dendritic and comb structures. It is shown that when a single metallocene catalyst is used the formation of dendritic polymers is favored with only a very small fraction of highly branched chains assuming comb structure. The use of a binary catalyst system is therefore proposed to obtain high content of comb polymers. One catalyst generates macromonomers and the other yields in-situ branching. It is found that the comb polymers give much narrower molecular weight distributions than dendritic polymers with same branching densities.     

Synthesis of Well-defined Long Chain Branched Polyethylene via Anionic Polymerization Combined with Graft-onto Method

Comb-like polyethylene(PE) was prepared via anionic polymerization combined with “graft-onto” process. The polybutadiene(PB) backbone underwent hydroxylation at 1,2-vinyl groups to obtain a controlled number of hydro- xyl groups along the main chain. After the translation of hydroxyl groups to tosyl groups, a nucleophilic substitution by living anionic PB chains was achieved. The comb PE was finally obtained by the hydrogenation of the obtained unsaturated comb polymer. Since the living anionic polymerization was used to prepare the backbones and the branch chains, molecular weight to molecular weight distribution(M_w/M_n<1.5) can be well-controlled in the final comb polymer, including the average number and length of branches.     

Grafting of Polymer Brushes from Xanthate-Functionalized Silica Particles

Monodisperse silica particles (SiPs) were surface-modified with a newly designed silane coupling agent comprising a triethoxysilane and an alkyl halide, namely, 6-(triethoxysilyl)hexyl 2-bromopropionate, which was further treated with potassium O-ethyl dithiocarbonate (PEX) to immobilize xanthate molecules on the particle surfaces. Surface-initiated macromolecular design via interchange of xanthates (MADIX) polymerization of vinyl acetate (VAc) was conducted with the xanthate-functionalized SiPs. The polymerization was well controlled and produced SiPs coated with poly(vinyl acetate) (PVAc) with a well-defined target molar mass and a graft density of about 0.2 chains nm⁻². Dynamic light scattering and TEM measurements revealed that the hybrid particles were highly dispersible in good solvents without any aggregation. The PVAc brushes were hydrolyzed with hydrochloric acid to produce poly(vinyl alcohol) brushes on the SiP surfaces. In addition, the number of xanthate molecules introduced on the SiP surfaces could be successfully controlled by adjusting the concentration of PEX. Thus, the SiPs have two functionalities: xanthates able to act as a MADIX chain-transfer agent and alkyl bromide initiation sites for atom transfer radical polymerization (ATRP). By using these unique bifunctional particles, mixed polymer brushes were constructed on the SiPs by MADIX of VAc followed by ATRP of styrene or methyl methacrylate.     

NIPAM共聚物多孔水凝胶的光引发RAFT合成及其溶胀性能

采用光引发可逆加成-断裂链转移(RAFT)方法,在室温下先合成了链端含有三硫代碳酸酯基的大分子链转移剂聚(N,N'-二甲基丙烯酰胺)(PDMAM),然后与N-异丙基丙烯酰胺(NIPAM)、N,N'-二甲基双丙烯酰胺(BIS)交联共聚合,并通过聚乙二醇的制孔作用制得PNIPAM-g-PDMAM梳型/多孔水凝胶.采用FTI...     

Chitosan-N-poly(ethylene oxide) brush polymers for reduced nonspecific protein adsorption

The possibility of using a novel comb polymer consisting of a chitosan backbone with grafted 44 units long poly(ethylene oxide) side chains for reducing nonspecific protein adsorption to gold surfaces functionalized by COOH-terminated thiols has been explored. The comb polymer was attached to the surface in three different ways: by solution adsorption, covalent coupling, and microcontact printing. The protein repellent properties were tested by monitoring the adsorption of bovine serum albumin and fibrinogen employing surface plasmon resonance and imaging null ellipsometry. It was found that a significant reduction in protein adsorption is achieved as the comb polymer layer is sufficiently dense. For solution adsorption this was achieved by adsorption from high pH solutions. On the other hand, the best performance of the microcontact printed surfaces was obtained when the stamp was inked either at low or at high pH. For a given comb polymer layer thickness/poly(ethylene oxide) density, significant differences in protein repellent properties were observed between the different preparation methods, and it is suggested that a reduction in the mobility of the comb polymer layer generated by covalent attachment favors a reduced protein adsorption.     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

Laser Raman and FTIR studies on Li+ interaction in PVAc-LiClO4 polymer electrolytes

The polymer electrolytes composed of poly(vinyl acetate) (PVAc) with various stoichiometric ratios of lithium perchlorate (LiClO(4)) salt have been prepared by solution casting method. The techniques Fourier transform infra-red (FTIR) and Laser Raman spectroscopy have been used to monitor polymer-salt complex formation, ion-ion and ion-polymer interactions as a function of salt concentration. Significant changes in both Laser Raman and FTIR spectra are observed which reveals an interaction between ester oxygens with lithium cation coordination. These results strongly suggest the interaction of lithium cation and network polymer chains. When the salt content is increased, the intensity of the internal Raman modes of the ClO(4)(-) increases. The ClO(4)(-) stretching mode observed at 934 cm(-1) in Laser Raman shows some additional shoulder peaks with increase in salt concentration. This reveals the presence of free anions, ion contact pairs and higher order ionic clusters. From the FTIR and Laser Raman results the transport mechanism of ions in PVAc:LiClO(4) polymer electrolytes has been discussed.     

聚丙烯酰胺-CuCl~2膜表面结构及对醋酸乙烯酯 聚合催化性能研究

根据IR,ESR,XPS和电导率的测试结果推定,在催化剂聚丙烯酰胺-CuCl~2膜表面上,1个Cu^2^+与聚丙烯酰胺4个链节单元配位,产生σ配位键而交联,形成疏水性的聚丙烯酰胺-Cu(Ⅱ)配位聚合物膜.从该膜的X射线光电子能谱中的Shake-up效应得知,膜表面的Cu^2^+具有高自旋态电子构型,其缺位处与醋酸乙烯酯,Na~2SO~3配位活化,并产生自由基氢,从而在室温Na~2SO~3水溶液体系(pH=7)中能催化引发醋酸乙烯酯按自由基加聚反应历程进行聚合,诱导期3min20s,得率75%。