Interactions between dextran-modified poly(methyl methacrylate) latex particles and concanavalin A

The electrostatic and affinity interactions between concanavalin A (Con A) and dextran-modified latex particles were investigated. The ratio of the initial number of dextran active sites to that of Con A molecules plays an important role in determining the structure of flocs formed during adsorption and, thereby, has an influence on the amount of adsorbed Con A and the subsequent elution yield. NaCl and d-glucose, used successively in the two-step desorption of Con A, were employed to study the relative importance of electrostatic and affinity interactions involved in the Con A adsorption process. A significant fraction of adsorbed Con A is attributed to the electrostatic interaction mechanism. The feasibility of using the dextran-modified latex products to purify Con A from Jack bean meal was demonstrated. Received: 22 February 2000 Accepted: 19 September 2000     

Synthesis of iron oxide/poly(methyl methacrylate) composite latex particles: Nucleation mechanism and morphology

A magnetic poly(methyl methacrylate) (PMMA) composite latex was prepared by soapless emulsion polymerization in the presence of ferrofluid, and the ferrofluid was prepared by means of a coprecipitation method. The effects of various polymerization parameters, such as the monomer concentration, ferrofluid content, and initiator concentration, on the conversion curve and particle size of the magnetic composite latex particles were examined in detail. The results showed that two nucleation mechanisms were involved according to the polymerization conditions. In the monomer‐rich and less ferrofluid system, self‐nucleation of PMMA was dominant over the entire course of emulsion polymerization. In the ferrofluid‐rich system, seeded emulsion polymerization was the main course to form the magnetic composite latex particles. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5695–5705, 2004     

Colloidal stability of chitosan-modified poly(methyl methacrylate) latex particles

Experiments of coagulation kinetics were used to study the influence of the electrolyte concentration on the colloidal stability of cationic poly(methyl methacrylate) latex particles with various degrees of chitosan modification. For the chitosan-free latex products prepared by various levels of 2,2′ azobis(2-amidinopropane) dihydrochloride (V-50) at constant pH, the critical coagulation concentration (ccc) increases with increasing V-50 concentration, due to the enhanced particle surface charge density. On the other hand, the chitosan-modified latex products at constant pH do not exhibit very different values of ccc. This result is attributed to the counterbalance between two opposite effects related to the grafted chitosan, that is, the increased particle surface charge density and the enhanced shift of the particle's shear plane toward the aqueous phase with the chitosan content. The ccc of the latex products with various degrees of chitosan modification decreases significantly when the pH increases from 3 to 7. This is because the degree of ionization of the surface amino groups (the particle surface charge density) decreases with increasing pH. As a result, the stability of the colloidal system decreases significantly with increasing pH. The apparent Hamaker constant and diffuse potential were obtained from the coagulation kinetics data. These two parameters along with the zeta potential and particle size data for the latex samples taken immediately after the end of the coagulation experiments were also used to study the effect of ionic strength on the colloidal stability of the latex particles. Received: 10 October 1998 Accepted in revised form: 16 December 1998     

Colloidal stability of dextran-modified latex particles toward adsorption of concanavalin A

The colloidal stability of the dextran-modified poly(methyl methacrylate) (PMMA) latex particles toward adsorption of a carbohydrate-binding protein, concanavalin A (Con A), is primarily controlled by the charge neutralization mechanism. Formation of a crosslinked network structure via the specific affinity interactions between the dimeric Con A molecules and the dextran molecules anchored onto different latex particles may also have an impact on the coagulation kinetics. Judging from the data of coagulation kinetics, the colloidal stability of the latex particles toward added Con A in the decreasing order is: latex particles without dextran modification>latex particles with a dextran content of 2.15%>latex particles with a dex-tran content of 1.24% based on total polymer weight (PMMA+grafted dextran). The coagulation mechanisms involved in the adsorption of Con A onto the latex particles have been proposed to explain these experimental data. Charge neutralization of the negatively charged latex particles by adsorption of the positively charged Con A is the predominant destabilization mechanism. The ratio of the number of dextran active sites to that of Con A molecules plays an important role in the formation of the crosslinked network structure. The electrolytes in water cause a reduction in the electrostatic repulsion force among the interactive latex particles, but this ionic strength effect is not significant in comparison with charge neutralization. Received: 22 October 1997 Accepted: 24 December 1997     

Dextran stabilized poly(methyl methacrylate) latex particles and their potential application for affinity purification of lectins

 Stable poly(methyl methacrylate) latex particles (220–360 nm in diameter) using dextran as the protective colloid were prepared and characterized in this study. Such an emulsion polymerization system follows Smith–Ewart Case III kinetics (i.e., the average number of free radicals per particle is greater than 0.5) due to the relatively large latex particle size. The carbohydrate content of these dextran modified emulsion polymers shows a maximum around 5% dextran based on total monomer weight. The latex stability during polymerization is closely related to the carbohydrate content of these latex particles, and it is controlled by the ratio of the thickness of the dextran adsorption layer to that of the electric double layer of the latex particles. The critical flocculation concentration (CFC) of the latex products correlates well with the latex stability during polymerization. The greater the total scrap produced during polymerization (i.e., the stronger the bridging flocculation), the lower is the CFC of the latex products. The affinity precipitation of concanavalin A (a model lectin used in this study) by the dextran modified PMMA latex particles is also illustrated in this study. The specifically adsorbed concanavalin A increases with the carbohydrate content of the dextran modified latex particles. Received: 9 December 1996 Accepted: 8 April 1997     

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with poly(butadiene-block-methyl methacrylate)

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with butadiene-methyl methacrylate diblock copolymers has been investigated by transmission electron microscopy. When the diblock copolymers are added to the blends, the size of PB particles decreases and their size distribution gets narrower. In PB/PMMA7.6K blends with P(B-b-MMA)25.2K as a compatibilizer, most of micelles exist in the PMMA phase. However, using P(B-b-MMA)38K as a compatibilizer, the micellar aggregation exists in PB particles besides that existing in the PMMA phase. The core of a micelle in the PMMA phase is about 10 nm. In this article the influences of temperature and homo-PMMA molecular weight on compatibilization were also examined. At a high temperature PB particles in blends tend to agglomerate into bigger particles. When the molecular weight of PMMA is close to that of the corresponding block of the copolymer, the best compatibilization result would be achieved. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 85–93, 1998     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

Swelling equilibrium and preferential sorption of crosslinked poly(methyl methacrylate) in the mixture acetonitrile + n-butanol

Measurements of preferential sorption,( ₃), determined by refractometry, and swelling equilibrium, ₃ ^–1, of PMMA networks have been carried out in the cosolvent mixture MeCN+BuOH at 25 and 49 C. With an intermediate mixture composition, ₃ ^–1 passes through a maximum at both temperatures. At 25 C MeCN is preferentially adsorbed by the network over most of the composition range, but a small inversion is detected. At 49 C MeCN is preferentially adsorbed over all the composition range.The behavior of the system crosslinked PMMA/MeCN + BuOH is compared with the results obtained for solutions of linear PMMA in mixtures formed by the same two solvents, MeCN and BuOH.     

Synthesis of densely branched poly(methyl methacrylate)s via ATR copolymerization of methyl methacrylate and ethylene glycol dimethacrylate

Densely branched poly(methyl methacrylate)s have been synthesized by copolymerization of methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDMA) using atom transfer free radical polymerization (ATRP). By employing the phenyl and benzyl esters of 2-bromo-2-methylpropionic acid as the initiators with 2,2-bipyridyl and Cu(I)Cl it has been possible to use high field ¹H nuclear magnetic resonance spectroscopy to evaluate in some detail the composition and structure of the branched PMMAs obtained. Parallel molar mass size exclusion chromatographic analysis using a multi-angle light scattering detector with a refractive index detector (MALS/SEC) has allowed the branched architecture of the products to be confirmed. Rather remarkably, high yields of branched PMMAs can be obtained without crosslinking using MMA/EGDMA molar feed ratios of up to 5/1 by appropriate adjustment of the molar feed of initiator. In particular by maintaining the EGDMA/initiator molar feed ratio ∼1/1 fully soluble products can be obtained that are densely branched since this feed ratio ensures that on average each living primary chain initiated contains on average only one branching EGDMA segment. As might be expected this controlled free radical process offers better control in the synthesis of branched polymer than the corresponding system we have reported using conventional free radical polymerization, and unlike the latter which requires the use of a chain transfer agent, the ATRP system requires no additional chain regulating component. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2375–2386, 2007     

Synthesis of core/shell structure of glycidyl–functionalized poly(methyl methacrylate) latex nanoparticles via differential microemulsion polymerization

The differential microemulsion polymerization technique was used to synthesize the nanoparticles of glycidyl-functionalized poly(methyl methacrylate) or PMMA via a two-step process, by which the amount of sodium dodecyl sulfate (SDS) surfactant required was 1/217 of the monomer amount by weight and the surfactant/water ratio could be as low as 1/600. These surfactant levels are extremely low in comparison with those used in a conventional microemulsion polymerization system. The glycidyl-functionalized PMMA nanoparticles are composed of nanosized cores of high molecular weight PMMA and nano-thin shells of the random copolymer poly[(methyl methacrylate)-ran-(glycidyl methacrylate)]. The particle sizes were about 50 nm. The ratios of the glycidyl methacrylate in the glycidyl-functionalized PMMA were achieved at about 5–26 wt.%, depending on the reaction conditions. The molecular weight of glycidyl-functionalized PMMA was in the range of about 1 × 10⁶ to 3 × 10⁶ g mol⁻¹. The solid content of glycidyl-functionalized PMMA increased when the amount of added glycidyl methacrylate was increased. The glycidyl-functionalized polymer on the surface of nano-seed PMMA nanoparticles was a random copolymer which was confirmed by ¹H-NMR spectroscopy. The amounts of functionalization were investigated by the titration of the glycidyl functional group. The structure of the glycidyl-functionalized PMMA nanoparticles was investigated by means of TEM. The glycidyl-functionalized PMMA has two regions of T_g which are at around 90 °C and 125 °C, respectively, of which the first one was attributed to the poly[(methyl methacrylate)-ran-(glycidyl methacrylate)] and the second one was due to the PMMA. A core/shell structure of the glycidyl-functionalized PMMA latex nanoparticles was observed.     

Polyepichlorohydrin polyurethane/poly(methyl methacrylate) interpenetrating polymer networks

Polyurethane (PU) based on polyepichlorohydrin/poly(methyl methacrylate) (PECH/PMMA) interpenetrating polymer networks (IPNs) was synthesized by a simultaneous method. The effects of composition, hydroxyl group number of PECH, NCO/OH ratio and crosslinking agent content in IPNs were investigated in detail. Some other glycols, such as poly(ethylene glycol), poly(propylene glycol) and hydroxyl-terminated polybutadiene, were also used to obtain PU/PMMA IPNs. The interpenetrating and fracture behaviors of the IPNs are explained briefly.     

Investigation at the chain segmental level of the miscibility of poly(vinyl chloride)/atactic poly(methyl methacrylate) blends

We employed high‐resolution ¹³C cross‐polarization/magic‐angle‐spinning/dipolar‐decoupling NMR spectroscopy to investigate the miscibility and phase behavior of poly(vinyl chloride) (PVC)/poly(methyl methacrylate) (PMMA) blends. The spin–lattice relaxation times of protons in both the laboratory and rotating frames [T₁(H) and T_1ρ(H), respectively] were indirectly measured through ¹³C resonances. The T₁(H) results indicate that the blends are homogeneous, at least on a scale of 200–300 Å, confirming the miscibility of the system from a differential scanning calorimetry study in terms of the replacement of the glass‐transition‐temperature feature. The single decay and composition‐dependent T_1ρ(H) values for each blend further demonstrate that the spin diffusion among all protons in the blends averages out the whole relaxation process; therefore, the blends are homogeneous on a scale of 18–20 Å. The microcrystallinity of PVC disappears upon blending with PMMA, indicating intimate mixing of the two polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2390–2396, 2001     

Structure and properties of poly(methyl methacrylate) particles prepared by a modified microemulsion polymerization

Nanoscale poly(methyl methacrylate) (PMMA) particles were prepared by modified microemulsion polymerization. Different from particles made by traditional microemulsion polymerization, the particles prepared by modified microemulsion polymerization were multichain systems. PMMA samples, whether prepared by the traditional procedure or the modified procedure, had glass-transition temperatures (T_g's) greater than 120 °C and were rich in syndiotactic content (55–61% rr). After the samples were dissolved in CHCl₃, there were decreases in the T_g values for the polymers prepared by the traditional procedure and those prepared by the modified process. However, a more evident T_g decrease was observed in the former than in the latter; still, for both, T_g was greater than 120 °C. Polarizing optical microscopy and wide-angle X-ray diffraction indicated that some ordered regions formed in the particles prepared by modified microemulsion polymerization. The addition of a chain-transfer agent resulted in a decrease in both the syndiotacticity and T_g through decreasing polymer molecular weight. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 733–741, 2004     

The degradation of poly(methyl methacrylate) in the effect of negative thixotropy

An investigation of the degradation of poly(methyl methacrylate) in the case of negative thixotropy of its solutions in tricresyl phosphate showed that the number of polymer bonds broken by flow as expressed through the decrease of molecular weight in the course of the effect is determined by shear energy imposed on the system, irrespective of the velocity gradient and temperature used.     

Phase behavior of a water/2‐propanol/poly(methyl methacrylate) cosolvent system

A phase diagram of poly(methyl methacrylate) in mixtures of water and 2‐propanol, individually nonsolvents for the polymer, was studied at 25 °C. For this system, there were two liquid–liquid demixing regions separated by a miscible region. This cosolvent phenomenon was thought to be a joint effect of the nonsolvents. The phase behavior was modeled according to modified Flory–Huggins chemical‐potential equations, which accounted for the possible contribution from a ternary interaction in terms of a lumped parameter, χ₁₂₃. The calculated phase‐equilibrium curves (binodals) agreed well with the measured results. By contrast, if only binary interaction parameters were considered, computations yielded binodals whose compositions departed significantly from the measured data. Using the wet phase inversion method with casting dopes selected on the basis of the phase diagram, we prepared membranes with microporous structures in various coagulation baths. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 747–754, 2000     

Synthesis of Poly(methyl methacrylate) Nanosize Particles by Differential Microemulsion Polymerization

Poly(methyl methacrylate) nanosize particles were synthesized by a differential microemulsion polymerization process. Sodium dodecylsulfate and ammonium persulfate were used as the surfactant and initiator, respectively. The effects of reaction conditions on the particle size have been investigated. A particle size of less than 20 nm in diameter has been achieved with surfactant/monomer and surfactant/water weight ratios of 1:18 and 1:120, i.e. much milder conditions than those previously reported in the literature.

TEM image of nanoparticles prepared via differential microemulsion polymerization.     

Thermal and photochemical stability of poly(methyl methacrylate) and its blends with poly(vinyl acetate)

An investigation of the thermal stability of poly(methyl methacrylate) (PMMA) blends with poly(vinyl acetate) (PVAc) revealed that PVAc acts as a stabilizer as concerns thermal and photochemical degradation when the processes take place in air. The temperatures of decomposition of these blends are higher than that of pure PMMA. The efficiency of photodegradation and photooxidation in the blends is lower than that of pure PMMA.     

Analysis on absorption spectra of Nd in poly(methyl methacrylate)

The absorption spectrum of neodymium (III) (Nd³⁺ doped in poly(methyl methacrylate) was measured. The Nephlauxetic effect was found in the spectrum compared to other spectra of Nd³⁺ doped in various matrices. The experimental data used, Slater-Condon parameters (F₂,F₄,F₆) and Lander parameter (ζ_4f) were calculated by the Taylor series expansion based on the assumption that the energy separation between J-levels of the 4fⁿ-configuration is a function of F₂,F₄,F₆ and ζ_4f. The Judd-Ofled intensity parameters (Ω₂,Ω₄,Ω₆) were also calculated. Analysis of the Nephlauxetic effect and the parameters variation on the host matrices was carried out.     

Poly(methyl methacrylate) encapsulation of calcium carbonate particles

Dispersed calcium carbonate particles are encapsulated with poly(methyl methacrylate). The optimum condition for the polymerization is investigated; and the encapsulated particles are characterized by spectrophotometric analysis, acid decomposition, thermal analysis, and microscopic observation. From the conversion comparison of the MMA monomer it is found that the optimum concentration of polymerization initiator is 1.58 × 10^?3 mol/L. The highest yield of encapsulation is obtained at 250 rpm with a concentration of 0.5 wt % surfactant (sodium dodecyl benzene sulfonate). A comparison of the Fourier transform IR spectra distinctly indicates the formation of PMMA on the surface of the calcium carbonate particles. The outcome of an acid decomposition test proves that the PMMA coating protects the particles. In addition, thermal analyses and microscopic observation characterize the PMMA on the surface of encapsulated particles. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4063–4073, 2004