X射线荧光光谱法同时快速测定锑矿石中伴生及有害元素

采用粉末压片制样,波长色散型X射线荧光光谱法测定锑矿石中9个次量伴生及有害元素Cu、Pb、Zn、As、Co、Ni、W、Ba、S.选用国家标准物质和人工合成标准参考物质建立校准工作曲线,采用经验系数法和散射线内标法校正基体效应和元素重叠干扰.方法的检出限低、精密度(RSD,n=12)小于5%,测定结果与参考值或化学值一致性良好.与化学法相比,操作简单、快速、准确度高,精密度好,有效解决化学法在锑矿石伴生、有害等微量组分分析中过程烦琐、干扰严重等问题.     

粉末压片—X射线荧光光谱法测定土壤中的铜铅锌砷锑钴铬镍等重金属元素

采用粉末压片法制样,使用ZSX PrimusⅡ型X射线荧光光谱仪,对土壤样品中与生命健康和环境污染有直接影响的重金属元素Cu、Pb、Zn、As、Sb、Co、Cr、Ni进行同时测定.选用土壤国家标准物质、以国家标准物质为基体自制校准物质绘制标准曲线,解决了相关标准不足的问题,拓宽了元素测定范围(10~20 000μg/g),重点探讨了As、Sb的测量条件.虽然As、Sb的检出限和准确测定下限较高,但对于土壤质量的评价有重要的参考意义.方法快速、简便、准确.     

X射线荧光光谱(XRF)法测定土壤污染样品中9种重金属元素

采用粉末压片法制样,利用理学ZSX PrimusⅡX射线荧光光谱仪,用国家标准物质土壤(GSS系列)、沉积物(GSD系列)、环境保护部标准样品研究所研制的土壤标准样品GSB Z 50011-88(黑钙土)、GSB Z 50012-88(棕壤)、GSB Z 50013-88(红壤)、GSB Z 50014-88(褐土)、湖南污染土壤标准(GBW0732729)作标准样品,建立了X射线荧光光谱(XRF)法测定农业地质土壤污染物样品中的Cu、Pb、Cr、Ni、Zn、Co、As、Mn、V等9种重金属元素的方法,采用经验系数法校正谱线重叠干扰和基体校正。用3个土壤考核样品和环境保护部标准样品研究所研制的GSB07-3272-2015作为样品评估方法的准确度和精密度,结果符合《全国土壤污染状况详查土壤样品分析测试方法技术规定》中规定的Cu、Pb、Cr、Ni、Zn、Co、As、Mn、V元素检测方法质量要求。     

自动消解仪—ICP法测定水系沉积物中6种重金属元素

建立了自动消解仪-电感耦合等离子体发射光谱法(ICP-OES)同时测定水系沉积物中Cu、Zn、Ni、Cr、Pb、Co六种元素含量的方法。该方法的相关系数好、检出限低。方法经国家标准物质(GBW07361)验证,准确度和精密度均能达到环境监测分析的要求,为水系沉积物中重金属元素含量的测定提供了简单可靠的分析方法。     

X射线荧光光谱(XRF)法测定土壤污染样品中9种重金属元素

采用粉末压片法制样,利用理学ZSX PrimusⅡX射线荧光光谱仪,用国家标准物质土壤(GSS系列)、沉积物(GSD系列)、环境保护部标准样品研究所研制的土壤标准样品GSB Z 50011-88(黑钙土)、GSB Z 50012-88(棕壤)、GSB Z 50013-88(红壤)、GSB Z 50014-88(褐土)、湖南污染土壤标准(GBW0732729)作标准样品,建立了X射线荧光光谱(XRF)法测定农业地质土壤污染物样品中的Cu、Pb、Cr、Ni、Zn、Co、As、Mn、V等9种重金属元素的方法,采用经验系数法校正谱线重叠干扰和基体校正。用3个土壤考核样品和环境保护部标准样品研究所研制的GSB07-3272-2015作为样品评估方法的准确度和精密度,结果符合《全国土壤污染状况详查土壤样品分析测试方法技术规定》中规定的Cu、Pb、Cr、Ni、Zn、Co、As、Mn、V元素检测方法质量要求。     

电感耦合等离子体原子发射光谱法(ICP-OES)测定水系沉积物中6种重金属元素

建立了自动消解仪消解-电感耦合等离子体原子发射光谱法(ICP-OES)同时测定水系沉积物中Cu,Zn,Ni,Cr,Pb,Co 6种元素含量的方法。方法中6种元素的检出限为0.000 2~0.02mg/L,工作曲线的相关系数均大于0.999。方法经国家标准物质(GBW07361)验证,准确度和精密度均能达到环境监测分析的要求,为水系沉积物中重金属元素含量的测定提供了简单可靠的分析方法。     

Epsilon5高能偏振能量色散X-射线荧光光谱仪测定垃圾焚烧灰渣中有害元素

使用粉末样品压片制样,用Epsilon5高能偏振能量色散X射线荧光(EDXRF)光谱仪测定垃圾焚烧灰渣中S、Cl、Ba、Cr、Cu、Na、Mn、Pb、Zn、Cd、As、Mo等多种有害元素,采用土壤、水系沉积物、海底沉积物、矿物等国家标准物质和人工合成标样作为校准。     

X射线荧光光谱法测定土壤污染样品中9种重金属

采用粉末压片法制样,利用理学ZSX PrimusⅡX射线荧光光谱仪,用国家标准物质土壤(GSS系列)、沉积物(GSD系列)、环境保护部标准样品研究所研制的土壤标准样品GSB Z 50011-88(黑钙土)、GSB Z 50012-88(棕壤)、GSB Z 50013-88(红壤)、GSB Z 50014-88(褐土)、湖南污染土壤标准(GBW0732729)做标准样品,建立XRF方法测定农业地质土壤污染物样品中的Cu、Pb、Cr、Ni、Zn、Co、As、Mn、V这9种重金属元素的方法,采用经验系数法校正谱线重叠干扰和基体校正。用3个土壤考核样和环境保护部标准样品研究所研制的GSB07-3272-2015作为样品评估该方法的准确度和精密度,结果符合《全国土壤污染状况详查土壤样品分析测试方法技术规定》中上述元素的规定检测方法质量要求。     

X射线荧光光谱法测定农田底泥中8种元素

建立X射线荧光光谱法测定农田底泥样品中砷、铬、铜、锰、镍、铅、锌、铁8种元素含量的分析方法.以塑料环粉末压片法制样,选用50种土壤、水系沉积物标准物质拟合校准曲线,探讨各元素的测定条件.当待测样品与建立校准曲线的标准样品粒径均小于75μm时,能够有效减少矿物效应和粒度效应的影响,从而提高检测准确度;各元素在各自的含量范...     

微波消解–火焰原子吸收光谱法测定土壤和沉积物中的重金属

建立微波消解–火焰原子吸收光谱法测定土壤和沉积物中Cu,Zn,Pb,Ni,Cr含量的方法。以HNO_3–HF–H_2O_2为消解体系,土壤和沉积物样品经微波消解后用火焰原子吸收光谱法测定。测定Cu,Pb,Zn时的助燃比为4∶1,测定Cr时的助燃比为4∶1.5,测定Ni时的助燃比为5∶1;Cu,Zn,Pb,Ni,Cr的检测波长分别为324.7,213.9,217.0,232.0,357.9 nm。各元素质量浓度在0～1.2mg/L范围内与吸光度呈良好的线性关系,线性相关系数均大于0.999,检出限为0.22～0.88 mg/kg。测定结果的相对标准偏差为1.0%～4.1%(n=6),加标回收率为95.0%～99.0%。该方法操作简便、快速,适用于土壤和沉积物样品中重金属的分析检验。     

Ammonium Acetate Extracts and Their Analysis for the Speciation of Metal Ions in Soils and Sediments

Abstract

The use of ammonium acetate (1 mol/l at pH 7) extraction of soils and sediments for the speciation of metal ions is briefly discussed. Because the sensitivity of flame atomic absorption spectrometry (FAAS) is insufficiently sensitive for the determination of many of the heavy metals in ammonium acetate extracts of unpolluted, and even in some polluted soils, the use of electrothermal atomic absorption spectrometry (ETAAS) was studied. A general procedure, using graphite furnace atomisation and the “universal” matrix modifier, palladium, was developed, that was sufficiently sensitive for the determination of Cd, Cr, Cu, Ni, Pb and Zn even in unpolluted soils. The concentration of zinc, however, will almost always be high enough for determination of FAAS and this method is to be preferred to ETAAS for this element.

While, for Cr, Cu, Ni and Pb, direct calibration with external standard solutions is practicable, it is necessary to use the standard additions calibration method for cadmium, to avoid matrix interference effects. The standard additions technique is recommended, however, because it compensates for real differences in the operating parameters of different instruments set to the same nominal values. This is particularly important for interlaboratory comparisons or for certification analyses in the preparation of reference materials.     

钽内标X射线荧光光谱法测定钨精矿中WO_3

提出了以钽为内标波长色散X射线荧光光谱法测定钨精矿中WO3的新方法。以Na2B4O7和Li2B4O7(质量比65:35)的混合物作为熔剂,Ta2O5为内标,同时加入LiNO3为氧化剂,在1200℃下进行熔融制样,最后将本方法应用于实际样品的分析,结果表明,以钽作为内标测定WO3,不仅可以在很大程度上降低实验操作和仪器测量带来的偏差,也可以消除基体效应的影响。方法用于测定白钨精矿和黑钨精矿中WO3,其准确度和精密度优于重量分析法。     

Energy dispersive X-Ray fluorescence determination of thorium in phosphoric acid solutions

Energy dispersive X-ray fluorescence studies on determination of thorium (in the range of 7 to 137 mg/mL) in phosphoric acid solutions obtained by dissolution of thoria in autoclave were made. Fixed amounts of Y internal standard solutions, after dilution with equal amount of phosphoric acid, were added to the calibration as well as sample solutions. Solution aliquots of approximately 2–5 µL were deposited on thick absorbent sheets to absorb the solutions and the sheets were presented for energy dispersive X-ray fluorescence measurements. A calibration plot was made between intensity ratios (Th Lα/Y Kα) against respective amounts of thorium in the calibration solutions. Thorium amounts in phosphoric acid samples were determined using their energy dispersive X-ray fluorescence spectra and the above calibration plot. The energy dispersive X-ray fluorescence results, thus obtained, were compared with the corresponding gamma ray spectrometry results and were found to be within average deviation of 2.6% from the respective gamma ray spectrometry values. The average precision obtained in energy dispersive X-ray fluorescence determinations was found to be 4% (1σ). The energy dispersive X-ray fluorescence method has an advantage over gamma ray spectrometry for thorium determination as the amount of sample required and measurement time is far less compared to that required in gamma ray spectrometry.     

Extraction procedures for the determination of heavy metals in contaminated soil and sediment

Extraction tests are commonly used to study the mobility of metals in soils and sediments by mimicking different environmental conditions or dramatic changes on them. The results obtained by determining the extractable elements are dependent on the extraction procedure applied. The paper summarises state of the art extraction procedures used for heavy metal determination in contaminated soil and sediments. Two types of extraction are considered: single and sequential. Special attention is paid to the Standard, Measurement and Testing projects from the European Commission which focused on the harmonisation of the extraction procedures and on preparing soil and sediment certified reference materials for extractable heavy metal contents.     

Determination of Hg,As, Pb,and Cd in Orchard Soils by Sequential Injection Vapor Generation Atomic Fluorescence Spectrometry

An analytical procedure was developed for determination of Hg, As, Pb, and Cd in soil samples using sequential injection vapor generation atomic fluorescence spectrometry (SI-VG-AFS) with sample preparation by microwave digestion system. The effects of analytical conditions on the fluorescence intensity were investigated and optimized. Under the optimized condition, the detection limits of the method were 5, 68, 40, and 3 ng L^?1 for Hg, As, Pb, and Cd, respectively. The accuracy of method was verified by the determination of the certified reference soil, and the recoveries for Hg, As, Pb, and Cd were in the range of 98.7–106.1%. The proposed method has been successfully applied to determine the heavy metals in navel orange orchard soils in Ganzhou, and the environmental quality of the orchard soils was assessed based on the content of the heavy metals. According to the second criterion of environmental quality standard for soils, Pb content in all soil samples collected from the orchards of 18 districts were within safe limits, but a few orchards were slightly contaminated with Hg, As, and Cd. Comparison of heavy metal mean concentrations with the safe limits of environmental quality standard for soils, the quality of Ganzhou navel orange orchard soils were in line with the request of the green food production base.     

光谱法快速测定半钢发热剂中Si、P、S的方法研究

目前,国内没有关于半钢发热剂的国家标准检测方法,只能根据组分范围分别检测各个组分,不仅耗时而且大量化学试剂对环境造成污染。故研究半钢发热剂全组分快速测定方法。文章采用粉末压片制样,研究其制样条件,包括磨样时间、压样时间和压力对测定结果的影响。采用其他方法定值提供的检测样品,作为X-射线荧光光谱法内控标样,文章中基体校正采用经验系数法,通过解谱拟合建立校准曲线,校准曲线建立后仪器建立漂移校正程序。实验结果精密度好,各元素的相对标准偏差在0.15%-1.3%。准确度满足生产需求,实验方法可用于公司快速检测半钢发热剂化学组分。     

Development of a procedure for the determination of X-ray fluorescence of metals in aerosols

The precision of the determination of the of heavy metals in aerosols by X-ray fluorescence after their collection on a paper filter is evaluated depending on the chemical composition and weight of unsaturated samples. Recommendations on the choice of the optimal shape of the calibration function and on the conditions for the determination of its coefficients used for the X-ray analysis of unsaturated samples are formulated. A procedure for the X-ray determination of metals in aerosols collected on paper filters is developed; its performance characteristics are presented.     

Slurry sampling for the determination of thallium in soils and sediments by graphite furnace atomic absorption spectrometry

The analytical conditions for thallium determination in soils and sediments by slurry sampling graphite furnace atomic absorption spectrometry were studied and optimized. Elimination of a strong background for soils rich in organic materials by application of tungsten carbides coated graphite tubes/platforms was studied in detail. Tungsten carbides increased the maximum permissible pyrolysis temperature from 300 to 900 degrees C. The mechanism of tungsten carbide formation on different graphite surfaces was proposed. Application of a strong basic anion-exchange resin for interference elimination in thallium determination in marine sediments was described. Calibration was performed directly using aqueous standards both for soil and sediment analysis. Analysis of CRM confirmed the reliability of the approach. The precision and accuracy of thallium determination by the described method for soils and sediments was acceptable. A characteristic mass of 13.8 pg was obtained and the limit of detection for the proposed method was around 0.06 microg g(-1) Tl.     

Determination of Y,Ba and Cu in superconductor films by X-ray fluorescence analysis

Radionuclide X-ray fluorescence analysis was used for the determination of Y, Ba and Cu in thin high-temperature superconducting films. Atomic emission ICP spectrometry was used to estimate the precision and accuracy of analytical results. Reasonable agreement between both methods was obtained when a polynomial calibration curve was applied.     

熔融制样–X射线荧光光谱法同时测定铀钼矿中主次成分

采用混合熔剂熔融制样,建立了同时测定铀钼矿中U,Mo,SiO_2,Fe_2O_3,Al_2O_3等的X射线荧光光谱法。以Li_2B_4O_7–LiBO_2作为熔融试剂,NH_4NO_3作为样品的氧化剂,样品与熔剂的质量比为1∶10。除使用铀矿石国家标准物质外,主要选取人工混合校准样品及历年实验室比对的铀钼矿校准样品绘制成工作曲线。采用理论系数法校正样品的基体效应,用Br Kα,Zr Kα,U Lα,Ba Lα,Zn Kα谱线扣除相应元素的谱线重叠干扰。该方法各组分测定结果的相对标准偏差均小于2.0%(n=10);用标准物质验证方法的准确度,测定值相对误差在0.00~8.00%之间,与标准值基本吻合。该法应用于生产实验中,可以满足对铀钼矿准确、快速的测量要求。