The preparation of a series of ring-linked derivatives of [Fe2(η-C5H5)2(CO)2(μ-CO)2] starting from [Fe2η5,η5-C5H4CH(NMe3)CH(NMe2)C5H4}(CO)2(μ-CO)2]+ salts

The salts [Fe₂η⁵,η⁵-C₅H₄CH{NMe₃)CH(NMe₂)C₅H₄}(CO)₂(μ-CO)₂][X] (X = I or SO₃CF₃) are the synthetic precursors to a wide range of [Fe₂(η-C₅H₅)₂(CO)₂(μ-CO)₂] derivatives in which the two cyclopentadienyl ligands are joined by a two-carbon bridge.     

Preparation and crystal structures of [μ-SbPh2]2[Mo(CO)2(η5-C5H5)]2·CHCl3 and SbPh[Fe(CO)2(η5-C5H5)]2

Antimony is reduced when [SbPh₂BrO]₂ is treated with Na[Mo(CO)₃(η⁵-C₅H₅)] to produce [μ-SbPh₂]₂[Mo(CO)₂(η⁵-C₅H₅)]₂. A structure determination shows diphenylstibido groups bridging between two Mo(CO)₂(η⁵-C₅H₅) moieties giving a central ‘butterfly’ shaped Sb₂Mo₂ ring. The cyclopentadiene rings are trans to each other and Mo–Sb and Sb–Sb separations are both short. An iron analogue could not be obtained from [SbPh₂BrO]₂ and Na[Fe(CO)₂(η⁵-C₅H₅)] but a mixture of SbPh[Fe(CO)₂(η⁵-C₅H₅)]₂ and SbPh₂[Fe(CO)₂(η⁵-C₅H₅)] was obtained using SbPh₂Cl. An X-ray structure for SbPh[Fe(CO)₂(η⁵-C₅H₅)]₂ shows an open stibinidine structure.     

Synthesis and structures of the η5-C5H5Cl(CO)2W-η1,η5-(PPh2)C5H4(CO)2Fe-η1,η5-C5H4Mn(CO)3 and MeSi[C5H4(CO)2Fe-η1,η5-C5H4Mn(CO)2PPh3]3 complexes

The metallation of the η⁵-C₅H₅(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₃ complex with BuⁿLi (THF, ?78 °C) followed by the treatment of the lithium derivative with Ph₂PCl afforded the η⁵-Ph₂PC₅H₄(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₃ complex. The reaction of the latter with η⁵-C₅H₅(CO)₃WCl in the presence of Me₃NO produced the trinuclear complex η⁵-C₅H₅Cl(CO)₂W-η¹,η⁵-(Ph₂P)C₅H₄(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₃. The structure of the latter complex was established by IR, UV, and 1H and ³¹P NMR spectroscopy and X-ray diffraction. The reaction of MeSiCl₃ with three equivalents of LiC₅H₄(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₂PPh₃ gave the hexanuclear complex MeSi[C₅H₄(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₂PPh₃]₃.     

Insertion reactions of t-Bu(η5-C5H5)Fe(CO)2

The complex t-Bu(η⁵-C₅H₅)FE(CO)₂ has been treated with triphenylphosphine in refluxing THF to produce t-BuCO(η⁵-C₅H₅)Fe(CO)(PPh₃). The large steric bulk of the t-butyl group suggests that this reaction should be faster than the reaction involving the methyl group, and a kinetic investigation illustrates this to be the case. The same steric bulk predicts that the reaction with SO₂ should be slow, and indeed we have been unable to effect the related SO₂ insertion reaction. Attempts to prepare the corresponding t-Bu(η⁵-C₅H₅)W(CO)₃ led to formation of the related isobutyl complex.     

Triphospha-Ferrocenes as Ligands. Crystal Structures of [Fe(η5-C5Me5)(η5-C2 TBu2P3)M(CO)5)], (M= Cr,MO, W) and the Novel ruthenium and Nickel Complexes [Fe(η5-C5Me5) (η5-C2 TBu2P3)Ru3(CO)9] and [Fe(η5-C5Me5)(η5-C2 tBu2P3)Ni(Co)2]2

Abstract

Syntheses and structures of penta- and hexaphosphorus analogues of ferrocene have been described recently¹. Unlike their simple ferrocene analogues, these complexes have further ligating potential towards other transition metal centres by virtue of the availability of the ring phosphorus lone-pair electrons that are not involved in the η⁵-coordination. We now describe the first examples of coordination compounds of the triphospha-ferrocene [Fe(η⁵-C₅Me₅) (η⁵-C₂ ^tBu₂P₃]. In the ruthenium complex [Fe(η⁵-C₅Me₅)(η⁵-C₂ ^tBu₂P₃) Ru₃(CO)₉] ² two adjacent phosphorus atoms of the η⁵-C₂ ^tBu₂P₃ ring are interlinked by a ruthenium carbonyl cluster in which all three ruthenium atoms interact with the phosphorus atoms. The tetrametallic nickel complex [Fe(η⁵-C₅Me₅)(η⁵-C₂ ^tBu₂P₃)Ni(CO)₂]₂ ³ represents the first example of intermolecular interlinkage of two phospha-ferrocene systems by two metal centres.     

Cyclooctaselenadiazole: synthesis,decomposition pathway,and reaction with (η5-C5H5) Co(L)2 (L = C2H4, PPh3). Crystal and molecular structure of [(η5-C5H5)CO]2(μ2-η3,η2-C8H6Se)

Thermolysis of cyclooctaselenadiazole (2) yields only selenium-containing products. Compound 2 reacts with CpCo sources to give [(η⁵-C₅H₅)CO]₂(μ₂η³,η²-C₈H₆Se), a fluxional compound whose structure has been determined by X-Ray crystallography.     

Regiospecific substitution of carbonyl by phosphine ligands in hydrocarbyl-substituted carbonyl clusters. Synthesis and spectroscopic characterization of Fe3(CO)8(PPh3)(μ3-η2- ⊥ -EtC2Et) and (η5-C5H5)NiFe2(CO)5(PPh3)(η3-η2- ⊥-C2But)

The complexes Fe₃(CO)₈(PPh₃)(μ₃-η²- ⊥ -EtC₂Et) and (η⁵-C₅H₅)NiFe₂(CO)₅(PPh₃)(η₃-η²- ⊥-C₂Bu^t) have been obtained by treating Fe₃(CO)₉(C₂Et₂) or (Cp)NiFe₂(CO)₆(C₂Bu^t) with PPh₃ under mild conditions; the substituted clustes have been characterized spectroscopically. Structures are proposed in which the phosphine is on the unique metalatom σ-bonded to the alkyne or acetylide moiety. Replacement of CO by PPh₃ ligands rather than by addition, is observed for the formally unsaturated Fe₃(CO)₉(C₂Et₂). Reorientation of the acetylide was expected for (Cp)NiFe₂(CO)₆(C₂Bu^t) upon substitution, but was not observed.     

Self-recognition by the iron chiral auxiliary [(η5-C5H5)Fe(CO)(PPh3] in the formation of (RR,SS)-[(η5-C5H5)FE(CO)(PPh3)COCH2]2CH2

Complete self-recognition of chirality is observed in the Michael addition of the enolate derived from R,S-[η⁵-C₅H₅Fe(CO)(PPh₃-COCH₃] to the acryloyl complex R,S-[(η⁵-C₅H₅Fe(CO)(PPh₃)-COCHCH₂)] to generate exclusively the single diastereoisomer of the glutaroyl complex RR,SS-[(η⁵-C₅H₅)Fe(CO)(PPh₃)COCH₂]₂CH₂.     

Application of electron-transfer chain catalysis: preparation of bridged 〚{(η5-C5H5)Fe(CO)2}2(μ-diphosphine)2+〛 complexes without chelated 〚(η5-C5H5)Fe(CO)(η2-diphosphine)+〛 byproducts

The ligand substitution by diphosphine L–L on (η⁵-C₅H₅)Fe(CO)₂I usually results in the chelated 〚(η⁵-C₅H₅)Fe(CO)(η²-L–L)⁺〛〚I^–〛 product exclusively. One could suppress the chelated complexes and selectively prepare the bridged 〚{(η⁵-C₅H₅)Fe(CO)₂}₂(μ-L–L)²⁺〛 complexes by application of the electron-transfer chain catalysis with a chemical initiation. Introducing a catalytic amount of reductant at low temperature to the mixture of 2:1 (η⁵-C₅H₅)Fe(CO)₂I/L–L in THF selectively produces the bridged complexes in 78–93% isolated yields where L–L is Ph₂P(CH₂)_nPPh₂, n = 1–4, or (η⁵-C₅H₄PPh₂)₂Fe.     

Conformational analysis and x-ray crystal structure of [(η5-C5H5)Fe(CO)(PPh3)CH2CH3]

The complex [(η⁵-C₅H₅)Fe(CO)(PPh₃)CH₂CH₃] is shown by ¹H NMR spectroscopy and an X-ray crystal structure analysis to adopt a single conformation with the methyl group residing between the cyclopentadienyl and carbon monoxide ligands.     

Electron transfer in organometallic clusters: XIV. Crystal and electronic structures of the tricobalt carbon cluster (η5-C5H5)Fe[η5-C5H4-CCo3(CO)9] and the biscarbyne cluster (η5-C5H5)Fe[η5-C5H4CCo3(η5-C5H5)3CH]

The crystal and molecular structures of (η⁵-C₅H₅)Fe[η⁵--C₅H₄CCo₃(CO)₉] (1), Pna2₁, α 17.354, b 11.463, c 11.207 Å Z = 4, R = 0.053, R_w = 0.056 for 939 reflections (I>3σ(I)) at 293 K, and (η⁵-C₅H₅Fe[η⁵--C₅H₄CCo₃(η⁵C₅H₅)₃CH] (2), P2₁/n, a 13.807(9), b 11.254(4), c 13.991(9) Å, β 99.98(5)°, Z = 4, R = 0.033 and R_w = 0.033 for 3051 observed reflections (I>3σ(I)) at 180 K, have been determined by X-ray methods.The results provide a detailed characterisation of related tricobalt-carbon complexes directly bound to ferrocene residues. In 1 the ferrocenyl moiety tops the pyramidal CCo₃ cluster core, while in 2 the CCo₃C core is bipyramidal with a ferrocenyl substituent on one capping carbon atom and a hydrogen atom at the other. In both cases the ferrocenyl group is tilted towards one cobalt atom of the cluster core, a distortion believed to be the consequence of the non-degeneracy of the carbyne p(π) orbitals resulting from a cooperative π-interaction between the clusters and the ferrocenyl substituents.     

The mechanism of fluxionality of (1,2,7-η3-2-Me-benzyl)(η5-C5H5)Mo(CO)2

It is shown that (1,2,7-η³-2-Me-benzyl)(η⁵-C₅H₅)Mo(CO)₂ exits in solution as one isomer which is fluxional, probably via (7-η¹-2-Me-benzyl)((η⁵-C₅H₅)Mo(CO)₂, with ΔG^≠₃₇₀ = 23.6 ± 1.0 kcal mol⁻¹. In contrast, (1,2,7-η³-3-Me-benzyl)(η⁵-C₅H₅)Mo(CO)₂ exits as two isomers at −20°C, which undergo interconversion at room temperature with ΔG^≠ 15.7 kcal mol⁻¹. This dynamic process is an allyl rotation. It is probable that there is also a low energy [1,5]-sigmatropic shift.     

The asymmetric sythesis of (-)-actinonin using the iron chiral auxiliary [(η5-C5H5)Fe(CO)(PPh3)]

The asymmetric synthesis of the α-pentyl succinate fragment of (-)-Actinonin is achieved using the chiral iron acetyl S-(+)-[(η⁵-C₅H₅)Fe(CO)(PPh₃)COCH₃] and subsequently converted to (-)-Actinonin in an overall yield of 41%.     

The reactions of AgI electrophile with [Fe2(η-C5H5)2(CO)2(L){CN(Me)H}]+ and [Fe2(η-C5H5)2(CO)2{CN(Me)H}2]2+ salts (L = CO or CNMe)

The protonated species [Fe₂(η-C₅H₅)₂(CO)₂(η-CO){μ-CN(Me)H}]X, [Fe₂(η-C₅H₅)₂(CO)(CNMe)(μ-CO){μ-CN(Me)H}][X], and [Fe₂(η-C₅H₅)₂(CO)₂{η-CN(Me)H}₂][X]₂ react with one equivalent of AgY. The Ag⁺ and one H⁺ act together as a two-electron oxidant. Silver metal is precipitated quantitatively and the substrates cleaved to give mono-nuclear products of the type (a) [Fe(η-C₅H₅)(CO)(L)X] and [Fe(η-C₅H₅(CO)(L)Y] or (b) Fe(η-C₅H₅(CO)(L)(CNMe)][X] (L = CO, CNMe). If X⁻ and Y⁻ are both coordinating anions such as NO₃⁻, I⁻, or Br⁻ or the solvent is MeCN products of type (a) are usually obtained with X = Y = MeCN⁺ if acetonitrile is used as the solvent. However, if either X⁻ or Y⁻ is a non-coordinating anion such as BF₄⁻ or PF₆⁻ and methanol is the solvent, the products are usually those of type (b). When X⁻ = [p-MeC₆H₄SO₃]⁻, both types of products are obtained in significant amounts. If two equivalents of Ph₃P are added to the methanol solution of [Fe₂(η-C₅H₅)₂(CO)₂{-CN(Me)H}₂[BF₆]₂, no reaction takes place until the third equivalent of AgNO₃ has been added. The products have been isolated and characterized by analysis and infrared spectroscopy. The previously unreported [Fe₂(η-C₅H₅)₂(CO)(CNMe)(η-CO){η-CN(Me)H}] X salts are described for X⁻ = BF₄⁻, PF₆⁻, Br⁻ · 2H₂O, I⁻ · H₂O, NO₃⁻ · 0.5H₂O, and p-MeC₆H⁴SO₃⁻.     

The Thermolysis of [Ru3(CO)12] in Cyclohexene: Synthesis and Charaterisation of the New Clusters [Ru3H2(CO)9(μ3-η1:η2:η1-C6H8)] and [Ru5(CO)12(μ4-η2-C6H8)(η4-C6H8)]

Thermolysis of [Ru₃(CO)₁₂] in cyclohexene for 24 h affords the complexes [Ru(CO)₃(η⁴-C₆H₈)] (1), [Ru₃H₂(CO)₉(μ₂-η¹:η²:η¹-C₆H₈)] (2), [Ru₄(CO)₁₂(μ₄-C₆H₈)] (3) [Ru₄(CO)₉(μ₄-C₆H₈)(η⁶-C₆H₆)] (4a and 4b, two isomers) and [Ru₅(CO)₁₂(μ₄-η²-C₆H₈)(η⁴-C₆H₈)] (5), where 1, 3, 4a and 4b have been previously characterised as products of the thermolysis of [Ru₃(CO)₁₂] with cyclohexa-1,3-diene. The molecular structures of the new clusters 2 and 5 were determined by single-crystal X-ray crystallography, showing that two conformational polymorphs of 5 exist in the solid state, differing in the orientation of the cyclohexa-1,3-diene ligand on a ruthenium vertex.     

Synthesis and reactions of phosphido-bridged μ3-alkylidyne clusters; X-ray crystal structures of the complexes [Co2W(μ-PEt2)3(CO)5(η-C5H5)], [Co2W{μ3-C(R)C(Et)C(Et)C(O)}(μ-CO)(CO)4(PPh2{C(Et)CHEt})(η-C5H5)], and [CoW{μ-C(R)C(Et)C(Et)C(OH)}(CO)4(η-C5H5)] (R = C6H4Me-4)

Reactions of the phosphido-bridged complexes [Co₂W(μ-H)(μ₃-CC₆H₄Me-4)(μ-PR₂)(CO)₆(η-C₅H₅)] (R = Ph or Et) with PR₂H (R = Ph or Et) or RCCR (R = Me or Et) are dominated by processes involving facile PC, CC and CH bond formation. The X-ray structures of the complexes [Co₂W(μ-PEt₂)₃(CO)₅(η-C₅H₅)], [Co₂W{μ₃-C(R)C(Et)C(Et)C(O)}(μ-CO)(CO)₄(PPh₂{C(Et)CHEt})(η-C₅H₅)], and [CoW{μ-C(R)C(Et)C(Et)C(OH)}(CO)₄(η-C₅H₅)] (R = C₆H₄Me-4) have been determined.     

Replacement of terminal and bridging oxo groups by phenylimido groups in (η-C5H5)OMo(μ-O)2OMo(η-C5H5) giving (η-C5H5)(NPh)Mo(μ-NPh)2Mo(NPh)(η-C5H5)

The treatment of (η-C₅H₅)OMo(μ-O)₂MoO(η-C₅H₅) with excess phenylisocyanate at reflux in tetrahydrofuran yields the arylimido-substituted complex (η-C₅H₅)(NPh)Mo(η-NPh)₂Mo(NPh)(η-C₅H₅), which has been characterized by elemental analysis, and mass, IR and ¹H NMR spectra.