Palladium-catalyzed benzannulation from alkynes and allylic compounds

Various alkynes reacted with allyl tosylates in the presence of palladium catalysts, giving polysubstituted benzenes with good to high regioselectivity. Pentasubstituted and trisubstituted benzenes were readily prepared by reaction of internal alkynes and terminal alkynes, respectively. The combination of allyl alcohols and p-toluenesulfonic anhydride could be utilized in place of isolated allyl tosylates. The cyclization of diynes with allyl tosylate afforded bicyclic compounds containing an aromatic ring.     

Selective cleavage of allyl and propargyl ethers to alcohols catalyzed by Ti(O-i-Pr)4/MXn/Mg

[reaction: see text] Allyl and propargyl ethers were effectively deallylated or depropargylated to the parent alcohols via a C-O bond cleavage catalyzed by a low-valent titanium reagent (LVT), Ti(O-i-Pr)4/TMSCl/Mg or Ti(O-i-Pr)4/MgBr2/Mg, under mild reaction conditions. Differentiation between the allyl and propargyl ethers was achieved by the reaction in the presence of AcOEt as an additive. The reagent also catalyzed intra- and intermolecular cyclotrimerization reactions of alkynes to substituted benzenes.     

Functionalized Benzofurans via Microwave‐Promoted Tandem Claisen‐Rearrangement/5‐endo‐dig Cyclization

Ortho‐allyloxy alkinyl benzenes undergo, upon microwave irradiation in dimethylformamide, a tandem sequence of Claisen‐rearrangement and 5‐endo‐dig cyclization to furnish 7‐allyl‐substituted benzofurans. With terminal alkynes, chroman‐4‐ones and enaminoketones become the main products. A mechanistic proposal for this observation relies on a reaction of the starting material with the solvent dimethylformamide under the microwave conditions.     

Palladium-catalyzed highly chemo- and regioselective formal [2+2+2] sequential cycloaddition of alkynes: a renaissance of the well known trimerization reaction?

A new concept of highly chemo- and regioselective formation of the benzene ring by a palladium-catalyzed formal [2 + 2 + 2] sequential intermolecular trimerization of alkynes is proposed. Homodimerization of terminal alkynes and subsequent [4 + 2] benzannulation with diynes gives tetrasubstituted benzenes in moderate to good yields. The introduction of two different alkynes (terminal and internal) in the first step of the sequence allows for construction of pentasubstituted benzenes from three different acyclic acetylenic units. In all cases the tetra- and pentasubstituted benzenes are formed as a single reaction product without being accompanied by any of regio- or chemoisomers. A significant acceleration of the sequential trimerization reaction in the presence of Lewis acid/phosphine combined system was observed. Mechanistic studies reveal that the Lewis acid assisted isomerization of the E-enyne formed in the first step of the sequence to the more reactive Z-isomer is responsible for the observed acceleration effect. The proposed methodology provides a conceptually new and synthetically useful route to multifunctional aromatic compounds.     

Regioselective synthesis of 1,3,5-substituted benzenes via the InCl(3)/2-iodophenol-catalyzed cyclotrimerization of alkynes

A novel indium(III)-catalyzed cyclotrimerization of alkynes in the presence of 2-iodophenol gave 1,3,5-substituted benzenes in excellent yields with complete regioselectivity. The reaction condition is tolerant to air, and atom economical, in accordance with the concept of modern green chemistry. This method provides a rapid and efficient access to 1,3,5-substituted benzenes.     

Pd-catalyzed one-pot multicomponent coupling reaction for the highly regioselective synthesis of polysubstituted benzenes

[Reaction: see text] Tetrasubstituted benzenes can be efficiently synthesized in a regioselective manner from alkynes and 2-bromoacrylates by palladium-catalyzed cascade Sonogashira coupling-benzannulation reaction.     

Regiospecific synthesis of 2-allyl-1,2,3-triazoles by palladium-catalyzed 1,3-dipolar cycloaddition

2-Allyl-1,2,3-triazoles were prepared by the palladium-catalyzed three component coupling (TCC) reaction of alkynes, allyl methyl carbonate and trimethylsilyl azide. A π-allylpalladium azide complex, which undergoes the 1,3-dipolar cycloaddition with alkynes, is proposed as a key intermediate in the TCC reaction.     

One-pot synthesis of substituted benzene via intermolecular [2+2+2] cycloaddition catalyzed by air-stable Ru(II)-complex

Intermolecular [2+2+2] cycloaddition reaction employing an air-stable ruthenium perchloro-cyclobutenonyl complex as a catalyst is reported. A series of internal alkynes were incorporated with dimethyl acetylene-dicarboxylate in a ratio of 1:2 to give various substituted benzenes in high yield and high chemoselectivity.     

Efficient and Z-selective cross-metathesis of conjugated enynes

[reaction: see text] The generation of a conjugated alkynyl alkylidene has been achieved using an allyl ether moiety as an intramolecular catalyst delivery vehicle. The reaction of this intermediate with alkenes and alkynes yields conjugated enynes with Z-selectivity.     

Nickel-catalyzed addition of dimethylzinc to aldehydes across alkynes and 1,3-butadiene: an efficient four-component connection reaction

In the presence of 10 mol % of Ni(acac)(2), four components comprising Me(2)Zn, alkynes, 1,3-butadiene, and carbonyl compounds combine in this order in 1:1:1:1 ratio to furnish (3E,6Z)-octadien-1-ols 1 in good yields. Similarly, the coupling reaction of Me(2)Zn, 1,omega-dienynes 5, and carbonyls furnishes 1-alkylidene-2-(4'-hydroxy-(1'E)-alkenyl)cyclopentanes and -cyclohexanes 6 and their oxygen and nitrogen heterocycle derivatives in good yield and an excellent level of 1,5-diastereoselectivity with respect to the cycloalkane methine carbon and the OH-bearing carbon of the C2 side chain. The reaction is completed in most cases within 1 h at room temperature under nitrogen, tolerates an ester, a hydroxy, an allyl and propargyl ethers, an allylamino, and a pyridyl functionalities, and accommodates a variety of aromatic and aliphatic alkynes and carbonyls (aldehydes and ketones).     

RhCl3/amine-catalyzed [2+2+2] cyclization of alkynes

The RhCl₃·3H₂O/i-Pr₂NEt-catalyzed [2+2+2] cyclotrimerization of alkynes has been achieved. The reaction can be widely used for various alkynes and provides tri- or hexa-substituted benzenes regioselectively in high yields. The [2+2+2] cycloaddition of diynes and alkynes is also developed, and it affords benzene derivatives in moderate to high yields.     

Highly beta-(E)-selective hydrosilylation of terminal and internal alkynes catalyzed by a (IPr)Pt(diene) complex

The regioselective hydrosilylation of terminal and internal alkynes catalyzed by the novel (IPr)Pt(AE) ( 7) (IPr = bis(2,6-diisopropylphenyl)imidazo-2-ylidene, AE = allyl ether) complex is presented. The (IPr)Pt(AE) catalyst displays enhanced activity and regioselectivity for the hydrosilylation of terminal and internal alkynes with low catalyst loading (0.1 to 0.05 mol %) when compared to the parent (IPr)Pt(DVDS) complex ( 6) (DVDS = divinyltetramethyldisiloxane). The reaction leads to exquisite regioselectivity in favor of the cis-addition product on the less hindered terminus of terminal and internal alkynes. The solvent effects were examined for the difficult hydrosilylation of benzylpropargyl ether. In light of the observed product distribution and kinetic data, a mechanistic scheme is proposed involving two competing catalytic cycles. One cycle leads to high regioselectivities while the other, having lost the stereodirecting IPr carbene ligand, displays low regiocontrol and activities. The importance of this secondary catalytic cycle is either caused by the strong coordinating ability of the alkyne or by the low reactivity of the silane or both.     

Copper oxide catalyzed domino process for the synthesis of substituted 2H-pyran-2-ones and polyhydroxy coumarin derivatives

An efficient method for the synthesis of substituted 2H-pyran-2-ones and polyhydroxy coumarin derivatives has been developed via CuO-catalyzed C–C bond formation followed by intramolecular cyclization reaction by reacting electron-deficient alkynes with 1,3-diketones and polyhydroxy benzenes, respectively. The domino reaction proceeded smoothly by using commercially available catalysts under reflux in toluene with very good yield.     

Iodocyclization of ethoxyethyl ethers to alkynes: a broadly applicable synthesis of 3-iodobenzo[b]furans

A wide variety of 3-iodobenzo[b]furans were readily prepared by iodocyclization of 2-alkynyl-1-(1-ethoxyethoxy)benzenes with the I(coll)2PF6-BF3 x OEt2 combination. Aryl-, vinylic-, and alkyl-substituted alkynes undergo iodocyclization in good to excellent yields. The mechanism of the reaction is also discussed.     

A highly practical instant catalyst for cyclotrimerization of alkynes to substituted benzenes

[reaction: see text] A 2-(2,6-diisopropylphenyl)iminomethylpyridine (1a)/CoCl(2).6H(2)O/Zn reagent has been developed as an effective instant catalyst for the intra- and intermolecular cyclotrimerization of alkynes to substituted benzenes, making the method extremely practical since the reagent, 1a/CoCl(2).6H(2)O/Zn, is inexpensive and easy to handle and the reaction is less sensitive to moisture and is reasonably general.     

Sonochemical Synthesis of 1,4‐Disubstituted 1,2,3‐Triazoles in Aqueous Medium

An ultrasound‐accelerated fast and efficient three‐component reaction for the regioselective synthesis of l,4‐disubstituted 1,2,3‐triazoles using different alkyl and allyl halides, terminal alkynes, and sodium azide in water at room temperature has been developed using CuI as catalyst. Ultrasonication dramatically decreases the reaction times.     

A Highly Active and Magnetically Recoverable Tris(triazolyl)–CuI Catalyst for Alkyne–Azide Cycloaddition Reactions

Nanoparticle‐supported tris(triazolyl)–CuBr, with a diameter of approximately 25 nm measured by TEM spectroscopy, has been easily prepared, and its catalytic activity was evaluated in the copper‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction. In initial experiments, 0.5 mol % loading successfully promoted the CuAAC reaction between benzyl azide and phenylacetylene, in water at room temperature (25 °C). During this process, the iron oxide nanoparticle‐supported tris(triazolyl)–CuBr displayed good monodispersity, excellent recoverability, and outstanding reusability. Indeed, it was simply collected and separated from the reaction medium by using an external magnet, then used for another five catalytic cycles without significant loss of catalytic activity. Inductively coupled plasma (ICP) analysis for the first cycle revealed that the amount of copper leached from the catalyst into the reaction medium is negligible (1.5 ppm). The substrate scope has been examined, and it was found that the procedure can be successfully extended to various organic azides and alkynes and can also be applied to the one‐pot synthesis of triazoles, through a cascade reaction involving benzyl bromides, alkynes, and sodium azide. In addition, the catalyst was shown to be an efficient CuAAC catalyst for the synthesis of allyl‐ and TEG‐ended (TEG=triethylene glycol) 27‐branch dendrimers.     

Reaction of allylsilanes and allylstannanes with alkynes catalyzed by electrophilic late transition metal chlorides

The intramolecular reaction of allylsilanes and allylstannanes with alkynes proceeds catalytically in the presence of Pt(II), Pd(II), Ru(II), and Au(III) chlorides. Although more limited, AgOTf also catalyzes the cyclization. Usually, PtCl2 as the catalyst in methanol or acetone gives the best results. The reaction proceeds by exo attack of the allyl nucleophile on the alkyne to form five- or six-membered ring carbocycles. The reaction generally proceeds with anti stereoselectivity. However, a terminally substituted trimethylsilyl derivative reacts by a syn-type addition. The intermediate alkenylpalladium complex has been trapped with allyl chloride to form an allylated derivative with an additional carbon-carbon bond.     

Palladium-Catalyzed Intermolecular Controlled Insertion of Benzyne-Benzyne-Alkene and Benzyne-Alkyne-Alkene-Synthesis of Phenanthrene and Naphthalene Derivatives

Aryne reagents, unlike alkynes, undergo insertion by allyl palladium complexes. The verification of the conversion described here is shown using Equation (1) as an example. The reaction proceeds in a few hours in refluxing acetonitrile to give the phenanthrene derivative in up to 71 % yield.     

The Ni-mediated cyclocarbonylation of allyl halides and alkynes made catalytic. Evidence supporting the involvement of pseudoradical Ni(i) species in the mechanism

We report here on a highly efficient catalytic method to synthesize intermolecularly the cyclopentane skeleton from starting products as simple as allyl halides, alkynes, and carbon monoxide under very mild reaction conditions by means of a substoichiometric amount of iron, acetone, and a catalytic amount of Ni(II) iodide.