Asararenes—A Family of Large Aromatic Macrocycles

We announce the establishment of a new family of macrocycles—the asararenes, which are based on para‐methylene linked “asarol methyl ether” (1,2,4,5‐tetramethoxybenzene) units. Macrocycles with 6–12 aromatic units have been synthesized and isolated in a single step from asarol methyl ether and paraformaldehyde. Even larger rings, with up to 15 asarol methyl ether units, have been observed by high‐resolution mass spectrometry. Single‐crystal X‐ray structures of asar[6]‐, asar[7]‐, asar[8]‐, asar[9]‐, asar[10]‐ and asar[11]arene highlight the diverse structural features of this family of macrocycles. While the cavities of the asar[6–8]arene macrocycles are mostly filled with methoxyl groups, the asar[9]‐ and asar[10]arene rings contain accessible cavities and self‐assemble into infinite channels filled with solvent molecules in the solid state. These solid‐state structures highlight the potential of this family of macrocycles for a wide range of potential applications.     

Tunable organic particles: An efficient approach from solvent-dependent Schiff base macrocycles

The synthesis of cyclopolymers upon controlling the degree of macrocyclic polymerization, followed by the discovery of new properties has attracted increasing attention in supramolecular chemistry. Herein, a Schiff-base condensation method performed at room temperature was used to control the formation of [1 + 1] and [2 + 2] macrocycles. In pure MeOH, the isomer [1 + 1] macrocycles were synthesized and organic particles such as dendritic, rods, and solid microspheres were directly precipitated from the reaction solution. The [1 + 1] macrocycles can be efficiently converted into their corresponding [2 + 2] macrocycles accompanied by the tunable morphology of the organic particles when n-hexane was added to the MeOH solution. Further studies showed that these organic particles have potential application toward the selective removal of Cd²⁺ ions with different adsorption ability in MeOH solution.     

Facile syntheses of homothia‐ and homoazacalixarenes

Decahomotetrathiacalix[6]arenes were conveniently prepared from the 2:2 cyclization reactions of bis(chloromethyl)phenol‐formaldehyde trimers with 1,2‐ethanedithiol in high yields. In contrast, the simi lar reactions of the trimers with 1,3‐propanedithiol instead of 1,2‐ethanedithiol gave 1:1 macrocycles, hexahomodithiacalix[3]arenes, in good yields. Homoazacalixarenes were also prepared from the analogous reactions using piperazines. These macrocycles adopt a cone‐like form as a preferable conformation in solution.     

Crowned Macrocycles Containing Two Pyrrolo[1,2-a] Indoles Created By Intramolecular Fusion

Heterocyclic fused-ring systems are of utmost importance because of their presence in many natural products with biological activity. Pyrroloindoles are tricyclic heterocycles that are present in various bioactive and medicinally valuable compounds. Herein, we report the synthesis of phenylene-bridged bis-pyrrolo[1,2-a]indole crowned macrocycles 1 – 3 in which the pyrrolo[1,2-a]indole moieties were formed via intramolecular fusion. The macrocycles were thoroughly characterized by 1D and 2D NMR, HRMS and X-ray crystallographic studies. The X-ray structure revealed that the two pyrrolo[1,2-a]indole moieties were parallel to each other, and one pyrrolo[1,2-a]indole unit was deviated by an angle of 9.54° while the other pyrrolo[1,2-a]indole unit was deviated by an angle of 12.0° from the mean plane defined by 28 core atoms. The macrocycles 1 – 3 absorb in the visible region and readily undergo oxidations because of their electron rich nature. The macrocycles 1 – 3 upon treatment with trifluoroacetic acid (TFA) generates the corresponding cation radicals 1 – 3 ^.+ which were stable in the open air for a week. The cation radicals 1 – 3 ^.+ absorb strongly in the NIR region and the experimental observations on crowned macrocycles 1 – 3 were corroborated by DFT and TD-DFT studies.     

Self-assembly, binding, and dynamic properties of heterodimeric porphyrin macrocycles

A series of heterodimeric tetralactam macrocycles have been self-assembled using two kinetically labile zinc porphyrin-pyridine interactions. The stability constants have been determined by UV-vis titrations in CHCl3. The stability constants depend on the degree of preorganization of the linker units connecting the interacting groups. The ability of the self-assembled macrocycles to bind a terephthalamide guest was also investigated. One of the macrocycles was used for the construction of a [2]rotaxane. The dynamic properties of this system provide insight into the exchange mechanisms that operate in complex noncovalent assemblies.     

Microwave assisted cyclocondensation of dialdehydes with chiral diamines forming calixsalen type macrocycles

Microwave irradiation of various dialdehydes and chiral diamines afforded chiral macrocyclic imines in moderate to good yields. Linked dialdehydes predominantly form [2+2] macrocycles whereas dialdehydes without linkers yield [3+3] macrocycles. This is the first report of template-free synthesis of calixsalen-type macrocycles formed in shorter reaction times under microwave conditions. In all the reactions, the salts of chiral diamines were used in contrast to the free diamines normally employed.     

Missing-link macrocycles: hybrid heterocalixarene analogues formed from several different building blocks

The synthesis and structural characterization of hybrid heterocalix[4]arene analogues containing pyrrole, benzene, methoxy-substituted benzene, and pyridine subunits is described. Macrocycles 1 and 2, examples of calix[2]benzene[2]pyrrole and calix[1]benzene[3]pyrrole systems, respectively, are synthesized by the condensation of pyrrole and an appropriate phenylbis(carbinol). Macrocycles 3 and 7, examples of calix[2]benzene[1]pyridine[1]pyrrole and calix[1]pyridine[3]pyrrole, respectively, are synthesized by the use of a carbene-based pyrrole-to-pyridine ring-expansion procedure. Single-crystal X-ray analysis reveals that compounds 1a, 1b, and 2b adopt 1,3-alternate conformations in the solid state, whereas compounds 3 and 7 display structures that are best described as "flattened partial cones" in terms of their conformation. (Series a refers to pure benzene-derived systems, whereas series b indicates macrocycles containing 5-methoxyphenyl subunits). In the solid state, the methoxy-functionalized macrocycles 1b and 2b, and the chloropyridine-containing macrocycle 7 exist as dimers. In the case of 1a and 7, these compounds interact with neutral solvent in the solid state. The conformations of the macrocycles in solution were explored by temperature-dependent proton NMR and NOESY spectral analysis. At 188 K, macrocycles 1a and 2a adopt flattened 1,3-alternate conformations, whereas macrocycles 3 and 7 exist in the form of flattened partial-cone conformations. Standard proton NMR titration analyses were carried out in the case of macrocycles 1a and 2a, and reveal that at least the second of these systems is capable of binding fluoride and chloride anions in CD(2)Cl(2) solution at room temperature (K(a)=571 and 17M(-1) in the case of 2a and F(-) and Cl(-), respectively).     

Co‐Conformational Distribution of Nanosized [2]Catenanes Determined by Pulse EPR Measurements

The co‐conformational ensembles of three differently sized [2]catenanes were studied by measuring pair correlation functions corresponding to the separation of nitroxide spin labels—one attached to each of the two macrocycles—with the double electron–electron resonance (DEER) experiment. A geometric model for the [2]catenanes was derived that approximates the macrocycles by circles and takes into account the topological constraint. Comparison of the experimental to the theoretically predicted pair correlation functions gives insight into the co‐conformational distribution and the size of the macrocycles. It was found that the macrocycles of the medium‐ and large‐sized catenanes in chloroform are close to fully expanded, while they are partially collapsed in glassy o‐terphenyl. For the small‐sized catenane, moderate interaction between the unsaturated sections of the macrocycles in chloroform is indicated by a slight overrepresentation of short label‐to‐label separations in the pair correlation function.     

Structure-property investigations of conjugated thiophenes fused onto a dehydro[14]annulene scaffold

A series of 12 thieno-fused macrocycles based on the dehydro[14]annulene framework have been prepared. Studies have focused on the optical and electronic properties of the dehydrobenzothieno[14]annulenes (DBTAs) and dehydrothieno[14]annulenes (DTAs) utilizing NMR spectroscopy, UV-vis spectrophotometry, electrochemistry, and DFT computations. X-ray crystal structures were also obtained for two of the macrocycles. The structure-property relationships were found to vary significantly based on the relative orientation of the thiophenes. The stability, properties, and reactivity of these macrocycles were found to be more typical of dehydroannulenes rather than oligothiophenes.     

Transition metal-mediated intramolecular [2+2+2] cycloisomerizations of cyclic triynes and enediynes

[reaction: see text] Nitrogen-containing 15-membered triacetylenic macrocycles known as 1,6,11-tris(arylsulfonyl)-1,6,11-triazacyclopentadeca-3,8,13-triynes (1) and enediynic macrocycles called 1,6,11-tris(arylsulfonyl)-1,6,11-triazacyclopentadeca-3-ene-8,13-diynes (4 and 5) were satisfactorily prepared. [2+2+2] cycloisomerization processes catalyzed by transition metals were tested in the above-mentioned macrocycles. Readily available and familiar cyclotrimerization precatalysts were examined for efficiency. Among them, the RhCl(CO)(PPh(3))(2) complex was found to catalyze the cycloisomerization reaction giving the desired cycloadducts in high yields.     

The synthesis of trianglimines: on the scope and limitations of the [3 + 3] cyclocondensation reaction between (1R,2R)-diaminocyclohexane and aromatic dicarboxaldehydes

The synthesis of aromatic dicarboxaldehydes, using dilithiation methodology is described along with their reactivity, in the [3 + 3] cyclocondensation reaction, with (1R,2R)-diaminocyclohexane to give trianglimine macrocycles. The scope and limitations of the cyclocondensation reaction are studied and some comments on the properties of the novel macrocycles are made such as their conformation in solution and temperature dependent dynamic NMR behaviour.     

π‐Conjugated [2]Catenanes Based on Oligothiophenes and Phenanthrolines: Efficient Synthesis and Electronic Properties

Novel π‐conjugated topologies based on oligothiophenes and phenanthroline have been assembled by combining their outstanding electronic and structural benefits with the specific properties of the topological structure. Macrocycles and catenanes are prepared by using an optimized protocol of transition metal‐templated macrocyclization followed by efficient Pd‐catalyzed cross‐coupling reaction steps. By using this method, [2]catenanes comprising two interlocked π‐conjugated macrocycles with different ring sizes have been synthesized. The structures of the [2]catenanes and corresponding macrocycles are confirmed by detailed ¹H NMR spectroscopy and high resolution mass spectrometry. Single crystal X‐ray structural analysis of the quaterthiophene–diyne macrocycle affords important insight into the packing features and intermolecular interaction of the new systems. The fully conjugated interlocked [2]catenanes are fully characterized by spectroscopic and electrochemical measurements.     

Synthesis, structure, and computational studies of soluble conjugated multidentate macrocycles

[Chemical reaction: See text] Conjugated, shape-persistent macrocycles based on [3 + 3] Schiff-base condensation are of interest for supramolecular materials. In an effort to develop new discotic liquid crystals based on these compounds, a series of macrocycles with peripheral alkoxy groups of varying length have been prepared. The synthesis and mechanism of formation have been probed by isolation of oligomeric intermediates. A single-crystal X-ray diffraction study of one macrocycle revealed a nonplanar, strongly hydrogen-bonded structure. To our surprise, even with very long substituents, the macrocycles were not liquid crystalline. This has been rationalized by ab initio calculations that indicate the macrocycles are undergoing rotation of the dihydroxydiiminobenzene rings that may not allow a stable discotic liquid crystalline phase. These results provide new insight into the formation and properties of these large macrocycles and may provide guidance to developing stable liquid crystalline materials in the future.     

Synthesis of huge macrocycles using two calix[4]arenes as templates

Macrocycles with up to 100 atoms have been synthesised using two calix[4]arenes as templates: first, (3,5-dialkenyloxy)phenyl groups are attached to the wide rim of a calix[4]arene via urea links, then the alkenyl groups are connected via a metathesis reaction using a tetratosylurea calix[4]arene for their correct prearrangement and finally the urea functions are cleaved to detach the newly formed macrocycles.     

Cucurbit[5]uril, Decamethylcucurbit[5]uril and Cucurbit[6]uril. Synthesis, Solubility and Amine Complex Formation

A simple way to prepare cucurbit[5]uril is described. The macrocycles of the cucurbituril type are nearly insoluble in water. The solubilities of cucurbit[5]uril, decamethylcucurbit[5]uril and cucurbit[6]uril in hydrochloric acid, formic acid and acetic acid of different concentrations have been investigated. Due to the formation of complexes between cucurbit[n]urils and protons the solubility increases in aqueous acids. The macrocyclic ligands are able to form complexes with several organic compounds. Thus, the complex formation of the cucurbituril macrocycles with different amines has beenstudied by means of calorimetric titrations. The reaction enthalpy gives noevidence of the formation of inclusion or exclusion complexes. ¹H-NMR measurements show that in the case of cucurbit[5]uril and cucurbit[6]uril the organic guest compound is included within the hydrophobic cavity. Decamethylcucurbit[5]uril forms only exclusion complexes with organicamines. This was confirmed by the crystal structure of the decamethylcucurbit[5]uril-1,6-diaminohexane complex.     

Synthesis of chiral nonracemic polyimine macrocycles from cyclocondensation reactions of biaryl and terphenyl aromatic dicarboxaldehydes and 1R,2R-diaminocyclohexane

The synthesis of biaryl and terphenyl dicarboxaldehydes using Suzuki coupling methodology and their macrocyclisation reactions with 1R,2R-diaminocyclohexane yielding novel polyimine macrocycles derived from the [2+2] and [3+3] cyclocondensation reactions is presented. The ratio of products was found to depend on the overall geometry of the dicarboxaldehydes.     

Tuning the (Chir)Optical Properties and Squeezing out the Inherent Chirality in Polyphenylene-Locked Helical Carbon Nanorings

Distorting linear polyaromatic hydrocarbons (PAHs) out of planarity affects their physical properties and breaks their symmetry to induce inherent chirality. However, the chirality cannot be achieved in large distorted PAHs-based macrocycles due to a low racemization barrier for isomerization. Herein, we report the precise synthesis and tuning size-dependent (chir)optical properties of a new class of chiral PAHs-containing conjugated macrocycles (cyclo[n]paraphenylene-2,6-anthrylene, [n]CPPAn_2,6 ; n=6–8). Their inherent chiralities were squeezed out in small anthrylene-based macrocycles. Efficient resolutions for chiral enantiomers with (P)/(M)-helicity of small [6-7]CPPAn s were achieved by HPLC. Interestingly, these macrocycles showed enriched size-dependent physical, chiral, and (chir)optical properties. Theoretical calculations indicate that these macrocycles have high strain energy (E_strain=60.8 to 73.4 kcal/mol) and very small E_gap (∼3.0 eV). Notably, these enantiomers showed strong chiroptical properties and dissymmetry factors (|g_abs| and |g_lum|∼0.01 for an enantiomer of [6]CPPAn_2,6 ), which can give them potential applications in optically active materials.     

Iodide-catalysed self-assembly of donor-acceptor [3]catenanes

Charged donor-acceptor [3]catenanes comprising the pi-accepting cyclobis(paraquat-4,4'-biphenylene) and pi-donating aromatic crown ether macrocycles have been prepared in high yields using thermodynamically controlled dynamic nucleophilic substitution.     

Pyrrole/macrocycle/MOF supramolecular co-assembly for flexible solid state supercapacitors

Supramolecular assemblies constructed through the encapsulation of conductive polymers (CPs) by macrocyclic molecules have attracted increasing interest in the fields of supramolecular chemistry and electrochemistry. In this work, an effective strategy was reported to improve the stability and conductivity of CPs by electrochemically constructing different supramolecular assemblies composed of macrocycles and CPs. Typically, we uploaded zinc-based MOF (ZIF-8) onto carbon nanotube film (CNTF) and further electrically deposited macrocycles and CPs to gain the flexible conductive electrodes. Herein, five different supramolecular macrocycles, including α-cyclodextrin (α-CD), sulfato-β-cyclodextrin (SCD), sulfonatocalix[4]arene (SC[4]), cucurbit[6]uril (CB[6]) and cucurbit[7]uril (CB[7]) were utilized and the electrochemical performances of the assembly electrodes increased in an order of α-CD < SCD < SC[4] < CB[6] < CB[7], significantly improving the areal capacitance up to 1533 mF/cm². This strategy may provide a new way for the application of macrocyclic supramolecules in electrochemical systems.     

Synthesis of Electron-Deficient Corona[5]arenes and Their Selective Complexation with Dihydrogen Phosphate: Cooperative Effects of Anion–π Interactions

Reported here are the syntheses, conformational structures, electrochemical properties, and noncovalent anion binding of corona[5]arenes. A (3+2) fragment coupling reaction proceeded efficiently under mild reaction conditions to produce a number of novel heteroatom- and methylene-bridged corona[3]arene[2]tetrazine macrocycles. Selective oxidation of the sulfur atom between two phenylene rings afforded sulfoxide- and sulfone-linked corona[5]arenes in good yields. All corona[5]arenes synthesized adopted similar 1,2,4-alternate conformational structures, forming pentagonal cavities. The cavity sizes and the electronic properties such as redox potentials, were measured with CV and DPV, and were influenced by the different bridging units. As electron-deficient macrocycles, the acquired corona[3]arene[2]tetrazines served as highly selective hosts, forming complexes with the hydrogen-bonded dimer of dihydrogen phosphate through cooperative anion–π interactions.