Synthesis and Biological Applications of Some Novel Spiro Heterocycles Containing 1,3,4‐Thiadiazine,Thiazole, and Oxazole Derivatives

2‐Ethoxy carbonylcyclopentanone (1) has been brominated to yield 2‐bromo‐2‐ethoxy carbonylcyclopentanone (2) which on further reaction with substituted thiosemicarbazones, thiocarbohydrazones, thiocarbamides and carbamides has furnished 1 ‐ thia‐3,4‐diaza‐5,7‐dioxo‐2‐[(substituted benzylidine)‐amino]spiro[4.5]dec‐2‐ene (3a–e) , 1‐thia‐3,4‐diaza‐5,7‐dioxo‐2‐[(substituted benzylidine)‐hydrazino] spiro[4.5]dec‐2‐ene (4a–e) , 1‐thia‐3‐aza‐2‐(substituted imino)‐4,6‐dioxo‐spiro[4.4]nonane (5a–f) and 1‐oxa‐3‐aza‐2‐(substituted imino)‐4,6‐dioxo‐spiro[4.4]nonane (6a–g) respectively. The structures of the compounds have been elucidated on the basis of spectral analysis.     

Imino ene reaction catalyzed by ytterbium(III) triflate and TMSCl or TMSOTf

A novel combined system of Yb(OTf)(3) with TMSCl or TMSOTf catalyzed an imino ene reaction. The reaction of N-tosylbenzaldimine (1) with alpha-methylstyrene (2) proceeded smoothly to give homoallylic amine 3 in the presence of a catalytic amount of Yb(OTf)(3) and TMSCl. This catalytic system was successfully applied to the imino ene reactions of various aldimines with alkenes. This new imino ene reaction provides a unique method for the three-component coupling reaction of an aldehyde, tosylamide, and alpha-methylstyrene in the presence of Yb(OTf)(3) and TMSOTf, to give the corresponding homoallylic amine.     

C60与叠氮化合物的单加成反应

本文从实验以及理论研究两方面介绍了C60与叠氧化合物的单加成反应。依照叠氮化合物的不同,C60与叠氮合物的单加成反应可分为烷基叠氮化物与C60的反应,酰基叠氧化物与C60的反应以及苯基叠氮化与C60的反应三类,而反应产物则为C60亚氨基[6,6]闭环衍生物和C60亚氨基[5,6]开环衍生物两类,不同类型的反应具有不同的反应机理,某些C60亚氨基[5,6]开环衍生物可以转化为C60亚氨基[6,6]闭环衍生物。本文还介绍了碳纳米管与叠氮化合物的加成反应。     

Rhodium(I)‐Catalyzed Bridged [5+2] Cycloaddition of cis‐Allene‐vinylcyclopropanes to Synthesize the Bicyclo[4.3.1]decane Skeleton

Previously reported was that cis‐ene‐vinylcyclopropanes (cis‐ene‐VCPs) underwent Rh‐catalyzed [5+2] reaction to give 5,7‐fused bicyclic products, where vinylcyclopropane (VCP) acts as five‐carbon synthon. Unfortunately, this reaction had very limited scope. Replacing the 2π component of cis‐ene‐VCPs to allene moiety, the corresponding cis‐allene‐VCPs did not undergo the expected normal [5+2] cycloaddition to give 5,7‐fused bicyclic products. Instead, the challenging bicyclo[4.3.1]decane skeleton was obtained via an unprecedented bridged [5+2] cycloaddition. DFT calculations were applied to understand why this bridged [5+2] reaction is favored over the anticipated but not realized normal [5+2] reaction.     

Competitive thermal ene reaction and Diels-Alder reactions of 2-[N-(alk-2-enyl)benzylamino]-3-vinylpyrido[1,2-a]pyrimidin-4(4H)-ones

Thermal reaction of 2-[N-(alk-2-enyl)benzylamino]-3-(2-substituted and 2,2-disubstituted)vinylpyrido[1,2-a]pyrimidin-4(4H)-ones gave azepine, the desired ene products, and/or pyran derivatives. The formation of the latter was responsible for the [4+2] cycloaddition reaction between the α,β-unsaturated ester carbonyl moiety as a diene part and the alkenylamino moiety as an ene one. The reaction features depended upon the kinds of substituents both on the vinyl and alkenyl counterparts; strongly electron-withdrawing substituents on the vinyl moiety or an electron-donating substituent on the alkenyl one changed the reaction feature from the ene reaction to the hetero Diels-Alder reaction.     

Conservation of the planar chiral information in the tandem oxy-cope/ene reaction

[reaction: see text] We report the stereoselective synthesis of a Decalin unit using a tandem oxy-Cope/ene reaction. [3,3]-Shift of 1,2-divinylcyclohexenol 18 generates (1E, 3Z, 7E) cyclodecatrien-2-ol 23 which tautomerizes to ketone 21 (Figure 3). The chiral information embedded in 23 is transferred into the newly formed stereogenic carbon C6 in 21. The efficiency of the chirality transfer is a reflection of the difference in the rates of ring inversion versus tautomerization of 23. Ketone 21 undergoes a carbonyl-ene reaction to give Decalin 20. Assuming a rapid equilibrium between macrocyclic diastereomers, the diastereomeric ratio of the transannular ene reaction is governed by the Curtin-Hammett principle. Analysis of the conservation of the planar chiral information in the tandem oxy-Cope/ene reaction is presented.     

Can the nitroso ene reaction proceed concertedly?

All nitroso ene reactions so far reported follow exclusively stepwise reaction paths. Herein, we report the first concerted nitroso ene reaction that occurs between o-isotoluene (or its naphthalenic analogues) and nitroso compounds (e.g., nitrosomethane and 4-nitronitrosobenzene). [reaction: see text]     

PyBidine–Cu(OTf)2‐Catalyzed Asymmetric [3+2] Cycloaddition with Imino Esters: Harmony of Cu–Lewis Acid and Imidazolidine‐NH Hydrogen Bonding in Concerto Catalysis

A bis(imidazolidine)pyridine (PyBidine)–Cu(OTf)₂ complex catalyzing the endo‐selective [3+2] cycloaddition of nitroalkenes with imino esters was applied to the reaction of methyleneindolinones with imino esters to afford spiro[pyrrolidin‐3,3′‐oxindole]s in up to 98 % ee. X‐ray crystallographic analysis of the PyBidine–Cu(OTf)₂ complex and DFT calculations suggested that an intermediate Cu enolate of the imino ester reacts with nitroalkenes or methyleneindolinones, which are activated by NH‐hydrogen bonding with the PyBidine–Cu(OTf)₂ catalyst.     

Efficient synthesis of the azaspirocyclic core structure of halichlorine and pinnaic acid by intramolecular acylnitroso ene reaction

[reaction: see text] A new efficient strategy for the construction of the 6-azaspiro[4.5]decane ring system was developed using intramolecular ene reaction of the acylnitroso compound. The spirocyclic ene product obtained as a single diastereomer was subsequently subjected to highly stereoselective ethynylation, leading to the azaspirodecane core of halichlorine and the pinnaic acids.     

Solvent-dependent changes in the ene reaction of RTAD with alkenes: the cyclopropyl group as a mechanistic probe

[reaction: see text] The vinylcyclopropyl moiety was used as an efficient probe to test mechanistic possibilities of the triazolinedione-alkene ene reaction. In non-hydroxylic solvents, this reaction afforded only the ene adducts via a closed three-membered aziridinium imide (AI) intermediate, whereas in hydroxylic solvents a dipolar intermediate is favored and trapped by the cyclopropyl moiety to form the corresponding cyclopropyl-rearranged solvent-trapped adducts.     

Efficient three-component synthesis of tetrahydrothieno[3,2-f]quinolines

An efficient one-pot method for the synthesis of tetrahydrothieno[3,2-f]quinolines is described, using the imino Diels-Alder reaction between ethyl-5-aminobenzothiophene-2-carboxylate, aromatic aldehydes and cyclic enol ethers. Furthermore, hydroxyalkyl-substituted tetrahydrothieno[3,2-f]quinolines were synthesized in good yields, by performing the same imino Diels-Alder reaction in absence of aldehydes. The intramolecular aza-Diels-Alder reaction of 5-aminobenzothiophene with o-(allyloxy)benzaldehyde was also performed resulting in the fully oxidized thienoquinoline derivative.     

A bifunctional monomer derived from lactide for toughening polylactide

(6S)-3-Methylene-6-methyl-1,4-dioxane-2,5-dione was synthesized from L-lactide and used as the dienophile to prepare spiro[6-methyl-1,4-dioxane-2,5-dione-3,2'-bicyclo[2.2.1]hept[5]ene] via an exoselective and diastereofacial-selective Diels-Alder reaction. Polymerizations of this bifunctional lactide derivative were successfully carried out under ring-opening and ring-opening metathesis polymerization conditions to yield high molecular weight and high Tg polymers. We further demonstrated that by incorporating a small percentage of spiro[6-methyl-1,4-dioxane-2,5-dione-3,2'-bicyclo[2.2.1]hept[5]ene] into poly(1,5-cyclooctadiene) and copolymerizing it with DL-lactide, novel polymeric alloys of PLA can be created that have tremendous improvements in toughness over PLA and the corresponding binary blend of PLA and poly(1,5-cyclooctadiene).     

Synthesis of azoles from 3,3′-[(4-alkoxyphenyl)imino]bis(propanoic acid hydrazides)

Abstract  

Reaction of 3,3′-[(4-alkoxyphenyl)imino]bis(propanoic acid hydrazides) with CS₂ in alkaline solution and subsequent acidification gave 5,5′-[[(4-alkoxyphenyl)imino]diethane-2,1-diyl]bis(1,3,4-oxadiazole-2(3H)-thiones). The same dihydrazides on reaction with phenyl isocyanates or phenyl isothiocyanates were converted to bis[N′-(phenylaminocarbonyl)propanoic acid hydrazides] and bis[N′-(phenylaminocarbonothioyl)propanoic acid hydrazides], which underwent cyclization in alkaline medium to produce 5,5′-[[(4-alkoxyphenyl)imino]diethane-2,1-diyl]bis(4-phenyl-2,4-dihydro-3H-1,2,4-triazol-3-ones) and their 3-thio analogues, whereas in sulfuric acid or POCl₃ 5,5′-[[(4-alkoxyphenyl)imino]diethane-2,1-diyl]bis(N-phenyl-1,3,4-oxadiazol-2-amines) and 5,5′-[[(4-alkoxyphenyl)imino]diethane-2,1-diyl]bis(N-phenyl-1,3,4-thiadiazol-2-amines) were obtained.     

Control of the mode selectivity (ene reaction versus [2 + 2] cycloaddition) in the photooxygenation of ene carbamates: directing effect of an alkenylic nitrogen functionality

The geometry of the double bond in oxazolidinone-substituted ene carbamates controls the mode selectivity (ene reaction versus [2+2] cycloaddition) of singlet oxygen through stereoelectronic effects, whereas the chiral auxiliary provides high diastereoselectivity through steric shielding.     

Stereochemistry in the reaction of 4-methyl-1,2,4-triazoline-3,5-dione (MTAD) with beta,beta dimethyl-p-methoxystyrene. Are open biradicals the reaction intermediates?

The reaction of 4-methyl-1,2,4-triazoline-3,5-dione (MTAD) with beta,beta-dimethyl-p-methoxystyrene (1) in chloroform affords four adducts: the ene, two stereoisomeric [4 + 2]/ene diadducts, and a minor product that is probably the double Diels-Alder diadduct. In methanol, only one regioisomeric methoxy adduct is formed. The stereochemistry of the reaction was examined by specific labeling of the anti methyl group of 1 as CD(3). In chloroform, the ene adduct is formed with >97% synselectivity, while the [4 + 2]/ene diadducts are formed with 20% loss of stereochemistry at the methyl groups. In methanol, the methoxy adducts are formed with almost complete loss of stereochemistry. A mechanism involving open biradicals is inconsistent with the experimental results. It is likely that the reaction proceeds through the formation of an aziridinium imide and an open zwitterionic intermediate. The aziridinium imide leads to the formation of the ene adduct. The open zwitterion, which has sufficient lifetime to rotate around the C-C bond, leads to the formation of a [4 + 2] cycloadduct, which reacts with a second molecule of MTAD in an ene-type mode to afford two stereoisomeric [4 + 2]/ene diadducts. In methanol, solvent captures the zwitterionic intermediate and forms the methoxy adduct. The relative distribution of the products in chloroform depends on the reaction temperature. Lower temperatures favor the ene reaction (entropically favorable), whereas at higher temperatures the [4 + 2]/ene diadducts become the major products.     

Novel ene trimerization of 1-phenylcyclopropene

1-Phenylcyclopropene (1) was synthesized by treatment of 1,1,2-tribromo-2-phenylcyclopropane (2) with 2.5 equiv of methyllithium followed by protonation. Compound 1 underwent ene dimerization to form ene dimer 5 followed by ene reaction with monomer 1 (enophile) to give an ene trimer 6. Both of these two ene reactions derived endo transition states. In the meantime, the [2+2] adduct, trans-1,2-diphenylbicyclo[3.1.0.0(2,4)]hexane (7), was also formed. When the adduct 7 was heated at THF refluxing temperature, 1,2-diphenylcyclohexa-1,4-diene (8) was obtained. Compound 8 was treated with DDQ to yield o-diphenylbenzene.     

Ruthenium complex catalyzed direct ortho arylation and alkenylation of aromatic imines with organic halides

[reaction: see text] The ortho position of the aromatic ring of imino group substituted aromatic compounds is directly arylated and alkenylated with organic halides in the presence of a catalytic amount of a ruthenium(II)-phosphine complex.     

Pop-the-cork strategy in synthetic utilization of imines: stabilization by complexation and activation via liberation of the ligated species

Treatment of trans-[PtCl(4)(RCN)(2)] (R = Me, Et) with ethanol allowed the isolation of trans-[PtCl(4)[E-NH[double bond]C(R)OEt](2)]. The latter were reduced selectively, by the ylide Ph(3)P[double bond]CHCO(2)Me, to trans-[PtCl(2)[E-NH[double bond]C(R)OEt](2)]. The complexed imino esters NH[double bond]C(R)OEt were liberated from the platinum(II) complexes by reaction with 2 equiv of 1,2-bis(diphenylphosphino)ethane (dppe) in chloroform; the cationic complex [Pt(dppe)(2)]Cl(2) precipitates almost quantitatively from the reaction mixture and can be easily separated by filtration to give a solution of NH[double bond]C(R)OEt with a known concentration of the imino ester. The imino esters efficiently couple with the coordinated nitriles in trans-[PtCl(4)(EtCN)(2)] to give, as the dominant product, [PtCl(4)[NH[double bond]C(Et)N[double bond]C(R)OEt](2)] containing a previously unknown linkage, i.e., ligated N-(1-imino-propyl)-alkylimidic acid ethyl esters. In addition to [PtCl(4)[NH[double bond]C(Et)N[double bond]C(Et)OEt](2)], another compound was generated as the minor product, i.e., [PtCl(4)(EtCN)[NH[double bond]C(Et)N[double bond]C(Et)OEt]], which was reduced to [PtCl(2)(EtCN)[NH[double bond]C(Et)N[double bond]C(Et)OEt]], and this complex was characterized by X-ray single-crystal diffraction. The platinum(IV) complexes [PtCl(4)[NH[double bond]C(Et)N[double bond]C(R)OEt](2)] are unstable toward hydrolysis and give EtOH and the acylamidine complexes trans-[PtCl(4)[Z-NH[double bond]C(Et)NHC(R)[double bond]O](2)], where the coordination to the Pt center results in the predominant stabilization of the imino tautomer NH[double bond]C(Et)NHC(R)[double bond]O over the other form, i.e., NH(2)C(Et)[double bond]NC(R)[double bond]O, which is the major one for free acylamidines. The structures of trans-[PtCl(4)[Z-NH[double bond]C(Et)NHC(R)[double bond]O](2)] (R = Me, Et) were determined by X-ray studies. The complexes [PtCl(4)[NH[double bond]C(Et)N[double bond]C(R)OEt](2)] were reduced to the appropriate platinum(II) compounds [PtCl(2)[NH[double bond]C(Et)N[double bond]C(R)OEt](2)], which, similarly to the appropriate Pt(IV) compounds, rapidly hydrolyze to yield the acylamidine complexes [PtCl(2)[NH[double bond]C(Et)NHC(R)[double bond]O](2)] and EtOH. The latter acylamidine compounds were also prepared by an alternative route upon reduction of the corresponding platinum(IV) complexes. Besides the first observation of the platinum(IV)-mediated nitrile-imine ester integration, this work demonstrates that the application of metal complexes gives new opportunities for the generation of a great variety of imines (sometimes unreachable in pure organic chemistry) in metal-mediated conversions of organonitriles, the "storage" of imino species in the complexed form, and their synthetic utilization after liberation.     

Stereoselective Nickel‐Catalyzed [2+2] Cycloadditions of Ene‐Allenes

A stereoselective nickel‐catalyzed [2+2] cycloaddition of ene‐allenes is reported. This transformation encompasses a broad range of ene‐allene substrates, thus providing efficient access to fused cyclobutanes from easily accessed π‐components. A simple and inexpensive first‐row catalytic system comprised of [Ni(cod)₂] and dppf was used in this process, thus constituting an attractive approach to synthetically challenging cyclobutane frameworks under mild reaction conditions.     

Illustrating the power of singlet oxygen chemistry in a synthetic context: biomimetic syntheses of litseaverticillols A-G, I and J and the structural reassignment of litseaverticillol E

Biomimetic syntheses of the litseaverticillols A-G, I and J are reported herein. The syntheses rely heavily on the application of two different modes of reaction for photochemically generated singlet oxygen, namely, the [4+2] cycloaddition of singlet oxygen (1O2) with furans and the ene reaction of 1O2 with double bonds. The highlight of these syntheses is a one-pot cascade sequence, involving five synthetic operations initiated by a [4+2] reaction, to form the fully functionalised litseaverticillol core. A series of regioselective ene reactions are then used to appositely functionalise the side chains. The synthesis of litseaverticillol E (both its originally proposed and its actual structures) allows a structural reassignment of this natural product.