Synthesis and application of polytetrahydrofuran-grafted polystyrene (PS-PTHF) resin supports for organic synthesis

Cross-linked polystyrene (PS) with polytetrahydrofuran (PTHF) chains were prepared for use in solid phase organic synthesis (SPOS). The resins were prepared from styrene, styrene-PTHF macromonomers and cross-linkers 1,4-bis[4-vinylphenoxy]butane or divinylbenzene by suspension polymerization. The styrene-PTHF macromonomers were prepared by cationic polymerization of 4-vinylbenzyl bromide and 4-(4-vinylphenoxy)butyl iodide activated by silver hexafluoroantimonate and 4-(5-hydroxypentyl)styrene activated by triflic anhydride. Alternatively, polytetrahydrofuran-grafted polystyrene (PS-PTHF) resins could also be directly prepared from 5-hydroxypentyl JandaJel by cationic polymerization using triflic anhydride as the initiator. These PS-PTHF resins exhibited good swelling characteristics across a wide spectrum of polar and non-polar solvents. These resins were used in the synthesis of 3-methyl-1-phenyl-2-pyrazolin-5-one, which requires β-ketoester formation at low temperature (−78 °C), resulting in good yield and product purity; whereas the same synthesis carried out on PEG-grafted PS (PS-PEG) resin resulted in incomplete synthesis.     

Novel methodology for the synthesis of N-alkoxyamines

[reaction: see text] We report a new methodology for the synthesis of the N-alkoxyamines, which can be used as initiators in "living" free radical polymerization. Silyl radical abstraction from alkyl halides allows the synthesis of N-alkoxyamines inaccessible by other methods.     

Efficient procedure for the preparation of (vinyl)polystyrene resin

(Vinyl)polystyrene resin is prepared in one step by treatment of Merrifield resin with an excess dimethylsulfonium methylide.     

Novel method for synthesis of titanium silicalite-1 (TS-1)

Titanium silicalite-1 (TS-1) was easily synthesized using inorganic silicon and titanium source, tetrapropylammonium bromide (TPABr) or TPAOH as templating molecule, NH3· H2O, HDA or TEAOH etc. as base sources. In this system, TPA cations (come from TPABr or TPAOH) served as tern-plating agents to direct the MFI structure. NH3H2O, TEAOH or HDA etc. provides the alkalinity necessary for crystallization. X-ray diffraction, UV-Vis, ER spectroscopies, SEM, 29 Si MAS NMR showed that the zeolites obtained possessed all the structural characteristics of TS-1, and titanium atoms were introduced into the framework in TS-1. This material was proved to have high crystallinity and high catalytic activity to allyl chloride epoxidation and propylene epoxidation. All the samples synthesized had similar catalytic properties with a standard TS-1 through compared inorganic reactant system with organic synthesis system using propylene epoxidation. The effects of silicon source and TPABr/SiO2 ratio were discussed.     

An improved procedure for the preparation of aminomethyl polystyrene resin and its use in solid phase (peptide) synthesis

2-Aminoethanol was used to successively replace hydrazine in the preparation of aminomethyl polystyrene resin thereby facilitating purification and by-product removal. The syntheses of the polypeptides ACP (65-74) and oxytocin demonstrated that the use of aminomethyl polystyrene resin prepared in this manner was equal to or better than that prepared using the hydrazine method.     

Tetraethyleneglycol diacrylate (TTEGDA)-crosslinked polystyrene resin as an efficient solid support for gel phase peptide synthesis

Various applications of the newly developed tetraethyleneglycol diacrylate (TTEGDA)-crosslinked polystyrene resin are illustrated by the synthesis of model peptides, fully protected peptides, peptide amides and biologically important sequences. PS-TTEGDA resin was prepared by suspension polymerization of styrene and TTEGDA and functionalized with chloromethyl, 4-cholromethyl-3-nitro, aminomethyl, α-bromopropionyl, a-aminopropionyl, 4-bromomethyl 3-nitrobenzamido, 4-aminomethyl-3-nitrobenzamido groups. Peptide synthesis was carried out using these modified resins by standard solid phase methodology. Coupling and deprotection in this synthetic strategy went to near completion showing the positive role of hydrophilic and flexible crosslinking agent TTEGDA in facilitating gelphase reactions. The peptides were removed from the support by photolysis, trifluoroaceticacid (TFA) treatment,trans-esterification or ammonolysis in high purity and yield. The crude peptides were purified by column chromatography/FPLC and characterized by aminoacid analysis, sequencing or¹H-NMR.     

Characterization of a trace by-product of the synthesis of the protease inhibitor tipranavir (PNU-140690)

Tipranavir^TM (PNU-140690) is a protease inhibitor under clinical investigation for the treatment of human acquired immunodeficiency syndrome (AIDS). During scale-up synthesis of clinical quantities of the bulk drug, a colored, transient by-product of the final coupling reaction was observed. Quantities of this colored, transient chemical species were too low (<<0.1%) for characterization by conventional spectroscopic methods. It was, however, possible to isolate sufficient material for characterization based on mass spectrometry and submicro inverse-detection gradient (SMIDG) nmr methods by methanol stripping of silica gel that had been used in purification of bulk drug. This process afforded an enriched feedstock from which small quantities of this highly colored and unstable (halflife < 18 hours in methanol and < 10 minutes in acetone) trace contaminant could be isolated by semi preparative reversed phase hplc. The impurity was identified as an unstable Zincke salt formed by the condensation of two molecules of the anilino precursor and the pyridine used as a base in the final step of the synthetic process. Following identification of this impurity, efforts were undertaken to engineer it out of the synthetic process.     

A novel methodology for the synthesis of 1-desoxy-Δ-tetrahydrocannabinol (THC) analogues

A versatile and efficient sequence was developed for the synthesis of 1-desoxy-Δ⁸-THC analogues and is demonstrated by the synthesis of sulfonamide analogues with an acetylene group at the C-2^′ position in the side chain. In this procedure the 1-desoxy-Δ⁸- THC ring structure is built first and the synthesis of the side chain is then developed.     

Enantioselective synthesis of HIV protease inhibitor amprenavir via Co-catalyzed HKR of 2-(1-azido-2-phenylethyl)oxirane

A short and efficient enantioselective synthesis of the HIV protease inhibitor amprenavir 1 (99% ee) as well as a formal synthesis of saquinavir 3 have been achieved in high enantiomeric purity starting from commercially available materials. Our strategy mainly comprises a Co-catalyzed two-stereocentred hydrolytic kinetic resolution (HKR) of racemic 2-(1-azido-2-phenylethyl)oxirane as the chirality inducing step. Also presented is a concise synthesis of (S)-3-hydroxytetrahydrofuran 4, the key structural feature, in high enantiomeric purity (98% ee).     

The analysis of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO® resin) in mixtures of PPO resin,polystyrene, and copolymers of PPO resin and polystyrene

A method of determining the quantity of ungrafted poly(2,6-dimethyl-1,4-phenylene oxide) (PPO®

1 Trademark of General Electric Company.

resin) in mixtures of such polyphenylene oxide or PPO resin, polystyrene (PS), and graft copolymers of PPO resin and PS is described. The technique is a combination of physical and chemical separations and gel permeation chromatographic (GPC) analysis. The extent of grafting on PPO resin and the quantity of ungrafted PPO resin were calculated from molecular weight data and compositional analysis.     

P(v) intermediate-mediated E1cB elimination for the synthesis of glycals

Glycals are highly versatile and useful building blocks in the chemistry of carbohydrate and natural products. However, the practical synthesis of glycals remains a long-standing and mostly unsolved problem in synthetic chemistry. Herein, we present an unprecedented approach to make a variety of glycals using phosphonium hydrolysis-induced, P(v) intermediate-mediated E1cB elimination. The method provides a highly efficient, practical and scalable strategy for the synthesis of glycals with good generality and excellent yields. Furthermore, the strategy was successfully applied to late-stage modification of complex drug-like molecules. Additionally, the corresponding 1-deuterium-glycals were produced easily by simple ^tBuONa/D₂O-hydrolysis–elimination. Mechanistic investigations indicated that the oxaphosphorane intermediate-mediated E1cB mechanism is responsible for the elimination reaction.

A novel glucosylphosphonium-hydrolysis induced E1cB-elimination provides a highly efficient, practical and scalable method for the synthesis of glycals with good compatibility and excellent yields.     

Novel branched isocyanides as useful building blocks in the Passerini-amine deprotection-acyl migration (PADAM) synthesis of potential HIV-1 protease inhibitors

Novel branched isocyanides have been prepared from l-serine and used as building blocks in the Passerini-amine deprotection-acyl migration (PADAM) sequence for the preparation of compounds with activity against HIV-1 protease.     

Novel method for the synthesis of (trifluoromethyl)oxirane

The reaction of 3,3,3-trifluoropropene with N-bromosuccinimide in acetic acid at 65—70 °C affords 3-acetoxy-2-bromo-1,1,1-trifluoropropane. When treated with an alkali, the latter is readily converted into (trifluoromethyl)oxirane.     

Design and synthesis of stereochemically defined novel spirocyclic P2-ligands for HIV-1 protease inhibitors

The synthesis of a series of stereochemically defined spirocyclic compounds and their use as novel P2-ligands for HIV-1 protease inhibitors are described. The bicyclic core of the ligands was synthesized by an efficient nBu 3SnH-promoted radical cyclization of a 1,6-enyne followed by oxidative cleavage. Structure-based design, synthesis of ligands, and biological evaluations of the resulting inhibitors are reported.     

Features of polystyrene synthesis in the presence of (diphenylbutadiene)tricarbonylchromium

Features of radical polymerization of styrene in the presence of (diphenylbutadiene)tricarbonylchromium were studied.     

A general methodology for the asymmetric synthesis of 1-deoxyiminosugars

A general methodology for the stereoselective synthesis of 1-deoxymannojirimycin and its three other stereoisomers is described. The achiral olefin 6 was converted through the common olefin intermediate 12 to the target compounds in a highly stereocontrolled manner. The regioselective asymmetric aminohydroxylation (AA) and diastereoselective dihydroxylation reactions were used for the introduction of all four stereocenters in the targets, and the ring-closing metathesis (RCM) reaction was utilized for the construction of the required six-membered ring.     

Polymer-supported approach for solution-phase synthesis of cysteine trap protease inhibitors: procedure for straightforward optimization of the P1-P1' pocket

Peptide-based reversible and irreversible cysteine proteases inhibitors are well reported in the literature. Many of these compounds have an electrophilic carbonyl group as a cysteine trap in the place of a scissile amide moiety of the natural substrate. As a common mechanism strategy, we have designed a probe library of a cysteine trap for rapid optimization of P1-P1' pockets of different cysteine proteases. The synthesis of this library using a straightforward methodology based on polymer-supported reagents and scavengers to avoid tedious purification steps has been achieved. For the selective monobromination of diazo ketones, preparation of a new supported reagent, piperidinoaminomethylpolystyrene hydrobromide, is also described.     

Optimization of the process variables for the synthesis of cardanol-based novolac-type phenolic resin using response surface methodology

Models capable of predicting the maximum extent of conversion (p) of cardanol-based novolac-type phenolic resin, have been developed using response surface methodology to determine the optimum reaction conditions. Three-dimensional response surface and their contour plot were drawn. The maximum extent of conversion (98.93%) was predicted when the cardanol was condensed with formaldehyde (molar ratio 1:0.652) at 119.84 °C for a time period of 3 h with the catalyst (e.g., citric acid) concentration of 1.988% of total volume of cardanol and formaldehyde. The pH of the reaction mixture was maintained at 3.0. These predicted values for optimum process conditions were in good agreement with experimental data.