Synthesis and characterization of zinc titanate doped with magnesium

Zinc titanate crystals doped with magnesium have been grown by conventional solid state reaction technique using metal oxides. It is shown that they are semiconductors. The characteristics of zinc titanate samples were found to depend on the heating conditions and the amounts of additions. Our studies revealed that magnesium can replace the zinc ion and forms a solid solution in the ZnTiO₃ phase. The electrical resistivity of (Zn,Mg)TiO₃ varied with sintering temperature, and has a minimum when sintered at 900 °C. Increasing amounts of magnesium will also decrease the resistivity. A V-shaped temperature dependence of resistivity was observed. Furthermore, the dielectric constant increased with sintering temperature and decreased with increasing amounts of magnesium. It also shows a maximum Q factor at a frequency of 8 GHz for the sample of (Zn_0.9, Mg_0.1)TiO₃ sintered at 900 °C.     

Calcium substituting B-site in relaxor ferroelectrics with perovskite structure probed by chemical ordering

Chemical ordering of Ca²⁺ doped 0.9Pb(Mg_1/3Nb_2/3)O₃-0.1PbTiO₃ ceramics were investigated by dielectric spectra, TEM diffraction and A_1g mode in Raman spectra. It is found degree of relaxor behavior increases first, and then decreases. It conflicts the prediction Ca²⁺ substitutes for A-site ion Pb²⁺ according to crystal chemistry theory. In this letter, a new mechanism that Ca²⁺ substitutes for B-site ions has been proposed, which satisfactorily explained change of chemical ordering. It exhibits strong evidence doped ions with larger ionic radius (Ca²⁺) are quite possibly substitute much smaller ones (Nb⁵⁺ or Ti⁴⁺) in B-site rather than all substitute larger A-site ion in relaxor ferroelectrics.     

TiO2-nonstoichiometry dependence on piezoelectric properties and depolarization temperature of (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics

(Bi_0.5Na_0.5)_0.94Ba_0.06Ti_xO_1+2x lead-free piezoceramics with x varying from 0.97 to 1.03 were fabricated and characterized in order to investigate the effects of TiO₂-nonstoichiometry on the piezoelectric properties and depolarization temperature of (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ composition. X-ray diffraction (XRD) analysis showed that all samples have a single phase of perovskite structure with rhombohedral symmetry. Piezoelectric and dielectric measurements revealed that deficiency of TiO₂ leads to an increase in the piezoelectric coefficient (d₃₃), free relative permittivity (), and loss tangent (tan δ) besides an increase in the electromechanical coupling coefficient (k_p) within a certain amount, while excess of TiO₂ results in a decrease in k_p, d₃₃, and , but an increase in tan δ. Depolarization temperature (T_d) measurement indicated a decrease and an increase in T_d as a result of increasing TiO₂ deficiency and TiO₂ excess, respectively. This TiO₂-nonstoichiometry also induced changes in the remanent polarization (P_r) and coercive field (E_c) of the ceramics.     

Effects of composition on phase structure and electrical properties of (K0.5Na0.5)0.90Li0.06Sr0.02Nb(1−x)SbxO3 ceramics

Lead-free (K_0.5Na_0.5)_0.90Li_0.06Sr_0.02Nb_(1−x)Sb_xO₃ (KNLSN-Sb_x) ceramics were synthesized by ordinary sintering technique. The compositional dependence of phase structure and electrical properties of the ceramics was systematically investigated. All samples possessed pure perovskite structure, showing room temperature symmetries of orthorhombic at x<0.01, coexistence of orthorhombic and tetragonal phases at x=0.01, and tetragonal at 0.02≤x≤0.05. The temperature of the polymorphic phase transition (PPT) was shifted to lower temperature and dielectric relaxor behavior was induced by increasing Sb content. The samples near the coexistence region (x=0.01) exhibited enhanced electrical properties: d₃₃∼145 pC/N, k_p∼38% and P_r∼20.4 μC/cm².     

Bias field effects on the dielectric properties of 0.67Pb(Mg1/3Nb2/3)O3-0.33PbTiO3 single crystals with different orientations

The domain states and phase transitions in 0.67Pb(Mg_1/3Nb_2/3)O₃-0.33PbTiO₃ single crystals were investigated by studying their relative permittivity under various dc bias at constant heating and cooling rates. The orientation dependence of the bias field effect was revealed by examining the temperature dependence of relative permittivity as a function of crystal orientation (the 〈111〉, 〈011〉 and 〈001〉 directions) and dc bias field. The crystals basically have a macrodomain rhombohedral ferroelectric state in the ferroelectric phase under zero dc bias. External bias field could modulate the domain state and induce a stable macrodomain state in the crystals. Also, it is proposed that the dc bias applied along the 〈001〉 or 〈011〉 direction could induce a tetragonal ferroelectric phase or an orthorhombic ferroelectric phase, respectively, in an intermediate temperature range.     

Pulsed electron beam deposition of highly oriented thin films of polytetrafluoroethylene

Thin films of polytetrafluoroethylene (PTFE) were deposited by pulsed electron deposition (PED) technique. The transmission electron microscopy (TEM) image of the RT fabricated (20 Å thick) film on carbon coated copper grid shows crystalline nature. Infrared spectra show one to one correspondence between PED ablated film and the PTFE bulk target. The asymmetrical and symmetrical -CF₂- stretching modes were observed at 1220 and 1156 cm⁻¹, respectively. The -CF₂- wagging and bending modes occur at 644 and 512 cm⁻¹, respectively. X-ray diffraction patterns of the film deposited at room temperature (RT) show oriented film along (1 0 0) plane of hexagonal structure and the crystalline nature is retained up to 300 °C on vacuum annealing. The room temperature fabricated film shows smooth and pin hole free surface whereas post-annealing brings discontinuity, roughness and pin holes.     

Maxwell-Wagner characterization of dielectric relaxation in Ni0.8Zn0.2Fe2O4/Sr0.5Ba0.5Nb2O6 composite

Dense composites were prepared through incorporating the dispersed Ni_0.8Zn_0.2Fe₂O₄ ferromagnetic particles into Sr_0.5Ba_0.5Nb₂O₆ ferroelectric matrix. Extrinsic dielectric relaxation and associated high permittivities of the materials are reported in the composites. We used an ideal equivalent circuit to explain electrical responses in impedance formalism. A Debye-like relaxation in the permittivity formalism was also found. Interestingly, real permittivity (ε′) of the sample containing 30% Ni_0.8Zn_0.2Fe₂O₄ shows obvious independence of the temperature at 100 kHz. Dielectric relaxation and high-ε′ properties of the composites are explained in terms of the Maxwell-Wagner (MW) polarization model.     

On the understanding of the microscopic origin of the properties of diluted magnetic semiconductors by atom probe tomography

Spintronics, in which both the spin and charge of electrons are used for logic and memory operations, promises to revolutionize the current information technology. Just as silicon supports microelectronics, diluted magnetic semiconductors (DMSs) will be the platform of spintronics. Ideal DMSs should maintain ferromagnetic and semiconducting properties at operating temperatures to realize the spintronic functions. Although many high-temperature Curie temperature DMSs have been reported, the origin of ferromagnetism remains controversial. Currently, this is a major obstacle to the development of spintronic devices. The solution to this problem depends on a more complete understanding of DMS microstructure, especially the distribution of doped magnetic ions at atomic resolution and any defects introduced. Therefore, an analysis technique is required, possessing both high spatial and elemental resolutions, which is beyond the capability of conventional techniques, such as electron microscopy. However, atom probe tomography (APT), which recently has been successfully applied to nanoscale characterization of structural materials, has the potential to provide the unique combination of near atomic spatial and elemental resolutions needed for such an investigation.     

A study of room-temperature ferromagnetism in transition metal and fluorine-doped spray-pyrolyzed SnO2 thin films

Room-temperature ferromagnetism has been observed in Co- or Mn-doped SnO₂ and Co- and F-co-doped SnO₂ thin films. A maximum magnetic moment of 0.80μ_B/Co ion has been observed for Sn_0.90Co_0.10O_1.925−δF_0.075 thin films, whereas in the case of Sn_1−xMn_xO_2−δ it was 0.18μ_B/Mn ion for x=0.10. The magnetization of both Sn_1−xCo_xO_2−δ and Sn_1−xCo_xO_2−y−δF_y thin films depends on the free carrier concentration. An anomalous Hall effect has been observed in the case of Co-doped SnO₂ films. However, the same was not observed in the case of Mn-doped SnO₂ thin films. Carrier-mediated interaction is convincingly proved to be the cause of ferromagnetism in the case of Co:SnO₂. It is, however, proposed that no carrier-mediated interaction exists in the case of Mn:SnO₂. Present studies indicate that dopants and hence electronic cloud-lattice interaction plays an important role in inducing ferromagnetism.     

Dielectric properties of SrBi2−xPrxNb2O9 ceramics (x=0, 0.04 and 0.2)

SrBi_2−xPr_xNb₂O₉ (x=0, 0.04 and 0.2) ceramics were prepared by a solid state reaction method. X-ray diffraction analysis indicated that single-phase layered perovskite structure ferroelectrics were obtained. A relaxor behavior of frequency dispersion was observed among Pr-doped SrBi₂Nb₂O₉. The degree of frequency dispersion ΔT increased from 0 for x=0-7 °C for x=0.2, and the extent of relaxor behavior γ increased from 0.94 for x=0-1.45 for x=0.2. The substitution of Pr ions for Bi³⁺ ions in the Bi₂O₂ layers resulted in a shift of the Curie point to lower temperatures and a decrease in remanent polarization. In addition, the coercive field 2E_c reduced from 110 kV/cm for an undoped specimen to 90 kV/cm for x=0.2.     

First-principles study of structural, optical and elastic properties of cubic HfO2

The structural, optical and elastic properties of cubic HfO₂ were studied using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory (DFT). The ground-state properties such as lattice parameter and bulk modulus were calculated and these results are in favorable agreement with the previous work. The complex dielectric function, refractive index, extinction coefficient, complex conductivity function, energy-loss spectrum, absorption coefficient and optical reflectivity are calculated and the peak position distributions of imaginary parts of the complex dielectric function have been explained. The calculated elastic properties are consistent with other calculated results.     

The potts glass in uniform and random fields: a monte carlo investigation

As a simple model of an anisotropic orientational glass with short range forces, the 3-state Potts model on the simple cubic lattice with nearest neighbor interactions drawn from a Gaussian distribution is considered. With Monte Carlo methods we study the response of the system to a uniform “field” which favors one of the states. This is motivated by experiments which apply stress that favors one molecular orientation of the quadrupolar glass. The responsem to that fieldh=H/k _BT is analyzed in terms of an expansionm= χ₁ h+χ₁ h ²+χ₁ h ³+..., where χ₁ is the linear susceptibility, and χ₂,χ₁₃ are nonlinear susceptibilities. Unlike the case of spin glasses, where the spin inversion symmetry of the system in the absence of fields implies χ₂≡0,χ₂ is nonzero here and diverges to −∞ at the zero temperature transition of the model, while χ₃ diverges to +∞ as in spin glasses. At inifinite temperature, however, χ₁=1/3, χ₂=1/18 and χ₃=-1/54, i.e. the nonlinear susceptibilities have a different sign as at low temperature. In contrast, a random field does not induce a uniform order parameterm but only a glass order parameterq. The temperature dependence of this glass order parameterq(T) shows for intermediate field strength order parameterq(T) shows for intermediate field strength a maximum of the slopedq(T)/dT very similar to corresponding experiments.     

Enhanced spontaneous polarization in Sr and Ca co-doped BaTiO3 ceramics

The dielectric and ferroelectric properties of (Ba_xSr_1−x)_0.77Ca_0.23TiO₃ ceramics with x=1 to 0.7 were studied and compared with those of Ba_xSr_1−xTiO₃ and Ba_0.77Ca_0.23TiO₃ ceramics. It has been found that Sr doping of the Ba_0.77Ca_0.23TiO₃ ceramics causes a drastic decrease of the Curie temperature, just like Sr doping of pure BaTiO₃ ceramics, demonstrating a cell volume effect. However, the (Ba_xSr_1−x)_0.77Ca_0.23TiO₃ ceramics with x=0.9 and 0.8 have larger spontaneous polarization than those of the corresponding Ba_xSr_1−xTiO₃ and Ba_0.77Ca_0.23TiO₃ ceramics, along with sufficient insulating properties. The enhancement of their polarization was explained by the increase of the lattice parameter c/a ratio due to the lattice distortion and strain developed in the ceramics.     

Predominant factors affecting the dielectric and piezoelectric properties of bismuth-containing complex perovskite solid solution

To study the factors affecting the dielectric and piezoelectric properties of bismuth-containing complex perovskites, the solid solution (1−x)Pb(Mg_1/3Nb_2/3)O₃-xBi(Mg_2/3Nb_1/3)O₃ was prepared by the solid state reaction method and its dielectric and piezoelectric properties were investigated. It is found that (1) at room temperature, the nonlinearity of the DE-loop for Pb(Mg_1/3Nb_2/3)O₃ is completely suppressed at a rather low x (<5%); (2) dielectric constant versus temperature curves deviate from the Curie-Weiss law at a temperature T_d much higher than the dielectric constant peak temperature T_m and T_m−T_d decreases considerably with increasing x; and (3) frequency dispersion ΔT_m=T_m (1 MHz)−T_m (10 kHz) increases with increasing x. Possible factors responsible for the variation of the dielectric and piezoelectric properties with x are discussed.     

Observation of giant dielectric constant in CdCu3Ti4O12 ceramics

Although CdCu₃Ti₄O₁₂ is isostructural to CaCu₃Ti₄O₁₂, the room temperature low-frequency dielectric constant of the former compound was reported to be ∼400, only 1/25 of that of the latter material [M.A. Subramanian, et al., J. Solid State Chem. 151 (2000) 323]. In this communication, we report that the dielectric constant of CdCu₃Ti₄O₁₂ can be remarkably increased by elevating the sintering temperature. The room temperature dielectric constant at 100 kHz achieves 9000, almost as much as that of CaCu₃Ti₄O₁₂, for the sample sintered at 1283 K. The appearance of giant dielectric constant in CdCu₃Ti₄O₁₂ is explained in terms of internal barrier layer capacitance (IBLC) effect with the subgrain boundary as the barrier. Our result supplies an approach in searching for new giant-dielectric-constant materials in the CaCu₃Ti₄O₁₂ family.     

Ti deficiency effect on the dielectric response of CaCu3Ti4O12 ceramics

Single phase ceramics CaCu₃Ti_4.0O₁₂ and CaCu₃Ti_3.9O₁₂ have been prepared using the traditional solid-state reaction method. Compared with the stoichiometric ceramics CaCu₃Ti_4.0O₁₂, Ti-deficient ceramics CaCu₃Ti_3.9O₁₂ have the larger lattice parameter, the higher force constant, and smaller dielectric constant and the lower dissipation factor, although their fundamental characters of dielectric response are similar. Their characteristic relaxation frequencies are not well fitted with the Arrhenius Law but a tentatively supposed relation. With the Cole-Cole Law, the fitted broadened factors of dissipation peaks are 0.5433 and 0.8651 for CaCu₃Ti_3.9O₁₂ and CaCu₃Ti_4.0O₁₂, respectively. All facts mentioned above imply that mutually correlated motion of Ti ions or defects may be expected to be responsible for the giant dielectric constant and high dissipation factor of CaCu₃Ti_4.0O₁₂.     

Synthetic Co50Pt50/Ru/CoFe hard–soft trilayer in spin valves

The influence of deposition power and seedlayer on the properties of hard magnet Co₅₀Pt₅₀ was studied. Co₅₀Pt₅₀(/Co₉₀Fe₁₀)/Ru/Co₉₀Fe₁₀ trilayer was used as pining/pinned layer in spin valves. The influences of different hard layer, soft layer and free layer on exchange bias, interlayer coupling, and magnetoresistance (MR) ratio were studied. Weak antiferromagnetic interlayer coupling was obtained by adjusting the thickness of hard and soft layers. MR of a spin valve with structure Cr2/CoFe0.5/CoPt4/CoFe0.5/Ru0.8/CoFe2.2/Cu2.05/CoFe2.6/Cu1.1/Ta1 reached 10.68% (unit in nm), which is comparable to those of IrMn-based synthetic spin valves. The increment of the coercivity of the free layer is mainly due to the static magnetic interaction between the hard layer and the free layer.     

Improvement in Dielectric Tunability of Ba0.6Sr0.4TiO4-Mg2TiO4 Composite Ceramics via Heterogeneous Nucleation Processing

Dielectric tunable composite ceramics Ba0.6Sr0.4 TiO4-Mg2 TiO4 （BST-MT） are prepared with a heterogeneous nucleation sol-gel approach. The Mg2 TiO4 powders are synthesized by the conventionM solid-state reaction method. The micro-sized MT powders with dispersant Ciba-4010 are introduced into Ba-Sr-Ti sol to obtain uniform and homogeneous mixture compounds with nano-sized BST particles synthesized via heterogeneous nucleation （HN） in the sol-gel process. Thus, the mierostructural and dielectric properties can be tailored. The dielectric constants of BST-MT composite ceramics can be adjusted in a larg＇e range from 294 to 1790, and the dielectric tunability can be adjusted from 29.4% to 37.0% with different MT contents from 60wt% to 20wt%. Compared to the samples prepared by the conventional solid-state （SS） process, the BST-MT composite ceramics by the heterogeneous nucleation sol-gel process exhibit a more uniform microstructure, and improve dielectric properties.     

A comparative approach to predicting effective dielectric, piezoelectric and elastic properties of PZT/PVDF composites

The present study addresses the problem of quantitative prediction of effective relative permittivity, dielectric loss factor, piezoelectric charge coefficient, and Young's modulus of PZT/PVDF diphasic ceramic-polymer composite as a function of volume fraction of PZT in the different compositions. Theoretical results for effective relative permittivity derived from several dielectric mixture equations like those of Knott, Rother-Lichtenecker, Bruggeman, Maxwell-Wagner-Webmann-Skipetrov or Dias-Dasgupta, Furukawa, Lewin, Wiener, Jayasundere-Smith, Modified Cule-Torquato, Taylor, Poon-Shin and Rao et al. were fitted to the experimental data taken from previous works of Yamada et al. Similarly, the results for effective piezoelectric coefficient and Young's modulus, derived from different appropriate equations were fitted to the corresponding experimental data taken from the literature. The study revealed that only a few equations like modified Rother-Lichtenecker equation, Dias-Dasgupta equation and Rao equation for dielectric and piezoelectric properties while the four new equations developed in the present study of elastic property (Young's modulus) well fitted the corresponding experimental results. Further, the acceptable data put to various regression analyses showed that in most of the cases the third order polynomial regression analysis provided more acceptable fits.     

Relaxor Behaviour and Ferroelectric Properties of （Li0.12Na0.88） （Nb0.9-xWa0.10Sbx）O3 Lead-Free Ceramics

New lead-free ceramics （Lio.12Na0.88） （Nbo.9-x Ta0.10 Sbx） 03 （0.01 × 0.06） are synthesized by solid-state reaction method. The dielectric, piezoelectric and ferroelectric properties of the ceramics are studied. The dielectric constant dependence with temperature and frequency of the ceramic specimen with x = 0.04 shows typical characteristics of relaxor ferroelectrics, and the Vogel-Fulcher relationship is fulfilled. The dielectric behaviour and its relation to the phase transition phenomena are discussed. The polarization hysteresis loops at room temperature are also measured.