Effect of anions on the phase stability of γ-FeOOH nanoparticles and the magnetic properties of gamma-ferric oxide derived from lepidocrocite

The effect of anions such as Cl⁻, SO₄²⁻, and HPO₄²⁻ on the phase stability of FeOOH (α or γ) during precipitation is investigated. Oxidation of Fe(OH)₂·xH₂O from FeCl₂ solution with high Cl⁻ concentration ([Cl⁻]/[Fe]=R_Cl≥8) or (NH₄)₂Fe(SO₄)₂ (FAS) with [HPO₄²⁻]/[Fe]=R_P≥0.02 yields phase-pure γ-FeOOH. In the medium ranges of R_Cl and R_P, mixed phases of α-FeOOH and γ-FeOOH are obtained. Replacement of OH⁻ by Cl⁻ with the bridging cations or strongly bonded HPO₄²⁻ ions in the matrix of the intermediate phase (Fe_x²⁺Fe_y³⁺(OH)_2x+2y−nz·xH₂O(A)_zⁿ⁻, where A is anions such as Cl⁻, SO₄²⁻, HPO₄²⁻, etc.), promoted the lower density γ-FeOOH. However, the particles are less developed and have poor crystallinity as evidenced from transmission electron microscope and thermogravimetry-differential thermal analysis of the precipitates. Whereas, monophasic, uniformly sized, nano-lath shaped particles with high aspect ratio >10 are obtained when morphology-controlling cation additives such as Pt⁴⁺, Pd²⁺ or Rh³⁺ are present in FeCl₂ (R_Cl≥8) solution. Preferential adsorption of additives on (0k0) and (h00) planes limits the growth in the perpendicular directions leading to high aspect ratios. The effect of these additives are suppressed by the phosphate ion, a strong complexing ligand, giving rise to fibrous aggregate with the length of individual particles as small as 10-30 nm. While most of the Cl⁻ ion is removed from the final precipitates on washing, phosphate remained as HPO₄²⁻ as evidenced from IR absorption spectra. Maghemite obtained by dehydroxylating γ-FeOOH contains randomly distributed micropores bringing in the relaxation effects of spins on the surface atoms as deciphered from Mössbauer spectroscopy. This leads to the low σ_s (44-48 emu/g) and H_c (120-130 Oe) for γ-Fe₂O_3−δ particles. Whereas nearly pore-free single crystalline particles obtained by reduction followed by reoxidation has high value of σ_s (73 emu/g) and H_c (320 Oe), which decreases to 30 emu/g and 75 Oe, respectively, for nanoparticles obtained from phosphate stabilized lepidocrocite. The mobility of iron ions and counter mobility of vacancies during the topotactic transformation of γ-FeOOH to magnetite to γ-Fe₂O_3−δ renders the particles pore-free.     

Ferromagnetism of localized and itinerant electrons in two-dimensional organometallic networks

The magnetic properties of two-dimensional (2D) molecular magnets with compositions (NPn₄)[Fe^IIFe^III(C₂O₄)₃] and ((NPn₄)₂)[Fe₂(C₆Cl₂O₄)₃] are studied via ⁵⁷Fe Mössbauer spectroscopy. It is shown that substituting the bridging oxalate ligand (C₂O₄)^2? for chloranilate (C₆Cl₂O₄)^2? having the same coordination ability produces fundamental changes in the ground state, turning it from a ferrimagnetic insulator to a ferromagnetic conductor.     

Theoretical investigations of the spin Hamiltonian parameters for the tetragonal [Rh(CN)4Cl2] complex in KCl

The spin Hamiltonian parameters (g factors, hyperfine structure constants and superhyperfine parameters) for the tetragonal [Rh(CN)₄Cl₂]⁴⁻ complex in KCl are theoretically investigated from the perturbation formulas of these parameters for a 4d⁷ ion in a tetragonally elongated octahedron. This center can be assigned to the substitutional Rh²⁺ on host K⁺ site reduced from Rh³⁺ by capturing one electron during the electron irradiation, associated with the two axial ligands CN⁻ replaced by two Cl⁻. The crystal-fields of the two axial Cl⁻ are weaker than those of the four planar CN⁻, yielding the tetragonal elongation distortion. This system belongs to the case of low spin (S = 1/2) under strong crystal-fields, different from that of high spin (S = 3/2) under weak and intermediate crystal-fields (e.g., 3d⁷ ions such as Fe⁺ and Co²⁺ in conventional chlorides). The calculated spin Hamiltonian parameters show good agreement with the experimental data. The above [Rh(CN)₄Cl₂]⁴⁻ complex due to the different axial and perpendicular ligands is unlike the tetragonally elongated [RhCl₆]⁴⁻ complex due to the Jahn–Teller effect in the similar NaCl:Rh²⁺ crystals.     

The roles of hydrochloric acid and polyethylene glycol in magnetic fluids

Increasing interest has been drawn to the studies of magnetic fluids due to their multiple applications from industry to medicine. However, further exploration is still required for the techniques of preparing satisfying, convenient and stable magnetic fluids. We explored characteristics of magnetic liquids prepared by employing co-precipitation techniques of hydrochloric acid (HCl) and polyethylene glycol (PEG), and the functions of HCl and PEG in the magnetic liquid. According to the improved technique, after preparing Fe₃O₄ by a co-precipitation method, hydrochloric acid and PEG2000 react with magnetic particles at a certain temperature to generate the anticipated magnetic nanoparticles. The process could be under an air atmosphere rather than a N₂ atmosphere. Compared with traditional techniques, the magnetic nanoparticles prepared by this method have smaller size, better dispersion and stability, with the average hydrodynamic diameter adjustable between 8 and 50 nm. This study revealed that reduction of nanoparticles size is not mainly due to a [Cl⁻] coating over the magnetic nanoparticles, but that HCl reacts with Fe₃O₄ particles after being heated. Meanwhile, PEG can stabilize or coat Fe₃O₄ nanoparticles as a dispersing and stabilizing agent.     

Synthesis and investigation of magnetic properties of substituted ferrite nanoparticles of spinel system Mn1−xZnx[Fe2−yLy]O4

Superparamagnetic nanoparticles of the spinel ferrite four-element system Mn_1−xZn_x[Fe_2−yL_y]O₄ (where L:Gd³⁺, La³⁺, Ce³⁺, Eu³⁺, Dy³⁺, Er³⁺,Yb³⁺) were synthesized by the co-precipitation method. The magnetic moments of the 10 nm diameter nanoparticles were comparable to the ones of Fe₃O₄ nanoparticles. A comparatively low T_C (∼52–72 °C) was observed for some of the compositions. The heating mechanism of the superparamagnetic particles in the AC magnetic field at radiofrequency range is discussed and especially the absence of the hysteresis loop in the M–H curve at room temperature. One possible explanation—spontaneous particle agglomeration—was experimentally verified.     

Recent developments in the formation and structure of tin-iron oxides by laser pyrolysis

Complex oxides demonstrate specific electric and magnetic properties which make them suitable for a wide variety of applications, including dilute magnetic semiconductors for spin electronics. A tin-iron oxide Sn_1−xFe_xO₂ nanoparticulate material has been successfully synthesized by using the laser pyrolysis of tetramethyl tin-iron pentacarbonyl-air mixtures. Fe doping of SnO₂ nanoparticles has been varied systematically in the 3-10 at% range. As determined by EDAX, the Fe/Sn ratio (in at%) in powders varied between 0.14 and 0.64. XRD studies of Sn_1−xFe_xO₂ nanoscale powders, revealed only structurally modified SnO₂ due to the incorporation of Fe into the lattice mainly by substitutional changes. The substitution of Fe³⁺ in the Sn⁴⁺ positions (Fe³⁺ has smaller ionic radius as compared to the ionic radius of 0.69 Å for Sn⁴⁺) with the formation of a mixed oxide Sn_1−xFe_xO₂ is suggested. A lattice contraction consistent with the determined Fe/Sn atomic ratios was observed. The nanoparticle size decreases with the Fe doping (about 7 nm for the highest Fe content). Temperature dependent ⁵⁷Fe Mössbauer spectroscopy data point to the additional presence of defected Fe³⁺-based oxide nanoclusters with blocking temperatures below 60 K. A new Fe phase presenting magnetic order at substantially higher temperatures was evidenced and assigned to a new type of magnetism relating to the dispersed Fe ions into the SnO₂ matrix.     

Microwave synthesis of magnetic Fe3O4 nanoparticles used as a precursor of nanocomposites and ferrofluids

Methods to synthesize magnetic Fe₃O₄ nanoparticles and to modify the surface of particles are presented in the present investigation. Fe₃O₄ magnetic nanoparticles were prepared by the co-precipitation of Fe³⁺ and Fe²⁺, NH₃·H₂O was used as the precipitating agent to adjust the pH value, and the aging of Fe₃O₄ magnetic nanoparticles was accelerated by microwave (MW) irradiation. The obtained Fe₃O₄ magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The average size of Fe₃O₄ crystallites was found to be around 8–9 nm. Thereafter, the surface of Fe₃O₄ magnetic nanoparticles was modified by stearic acid. The resultant sample was characterized by FT-IR, scanning electron microscopy (SEM), XRD, lipophilic degree (LD) and sedimentation test. The FT-IR results indicated that a covalent bond was formed by chemical reaction between the hydroxyl groups on the surface of Fe₃O₄ nanoparticles and carboxyl groups of stearic acid, which changed the polarity of Fe₃O₄ nanoparticles. The dispersion of Fe₃O₄ in organic solvent was greatly improved. Effects of reaction time, reaction temperature and concentration of stearic acid on particle surface modification were investigated. In addition, Fe₃O₄/polystyrene (PS) nanocomposite was synthesized by adding surface modified Fe₃O₄ magnetic nanoparticles into styrene monomer, followed by the radical polymerization. The obtained nanocomposite was tested by thermogravimetry (TG), differential scanning calorimetry (DSC) and XRD. Results revealed that the thermal stability of PS was not significantly changed after adding Fe₃O₄ nanoparticles. The Fe₃O₄ magnetic fluid was characterized using UV–vis spectrophotometer, Gouy magnetic balance and laser particle-size analyzer. The testing results showed that the magnetic fluid had excellent stability, and had susceptibility of 4.46×10⁻⁸ and saturated magnetization of 6.56 emu/g. In addition, the mean size d (0.99) of magnetic Fe₃O₄ nanoparticles in the fluid was 36.19 nm.     

Mössbauer study of ultrafine amorphous Fe−B alloys

The chemical composition of ultrafine amorphous Fe−B powders prepared by a chemical reduction depends on the mixed molar ratio of KBH₄ to Fe ions. We propose the following reaction processes for the formation of ultrafine Fe−B powders: (1) 4Fe²⁺+2BH₄₋+6OH⁻→2Fe₂B+6H₂O+H₂ and (2) 4Fe²⁺+2BH₄₋+7OH⁻→2Fe₃B+Fe+BO₂+5H₂O+5/2H₂.     

A polyhedron model for the spinel systems LI x Fe1−x CR2O4

Mössbauer spectra of the system Li⁺ _xFe²⁺ _1?2xFe³⁺ _x[Cr₂]O₄ measured at 150 K consist of one Fe(III) absorption and several Fe(II) doublets. An explanation was able by use of a statistical model of the Fe(II) environments.     

Redox reactions of K3[Fe(CN)6] during mechanochemically stimulated phase transitions of AlOOH

Thermally induced redox reactions of K₃[Fe(CN)₆] (1) were investigated for a broad temperature range by thermal methods and structure analytical methods (ESR and Mößbauer spectroscopy, X-ray Powder diffraction and XANES). Based on the influence of the mechanically activated and transforming matrices 2 and 3, redox processes can be tuned to form doped Al₂O₃ systems which contain either isolated Fe³⁺ centres or redox active phases and precursors like (Al_1−xFe_x)₂O₃ (4), (Al_3−xFe_x)O₄ (5), Fe₃O₄, Fe₂O₃ and Fe⁰. The phase Fe₃C and the chemically reactive C-species were detected during the reaction of 1. The final composition of the doped products of α-Al₂O₃ is mainly influenced by the chemical nature of the Fe doping component, the applied temperature and time regime, and the composition of the gas phase (N₂, N₂/O₂ or N₂/H₂). From the solid state chemistry point of view it is interesting that the transforming matrix (2 and 3) possesses both oxidative and protective properties and that the incorporation of the Fe species can be performed systematically.     

High-spin metal-cyanide clusters: species incorporating [Mn(salen)] complexes as a source of anisotropy

The use of N,N′-ethylenebis(salycylideneiminato) (salen) complexes of Mn^III in assembling high-spin metal-cyanide coordination clusters with significant magnetic anisotropy is demonstrated. The reaction of [Mn(salen)(H₂O)₂]⁺with [Cr(CN)₆]³⁻ in aqueous solution generates {Cr[CNMn(salen)(H₂O)]₆}[Cr(CN)₆]·6H₂O (1), a previously reported compound featuring a heptanuclear cluster with a distorted octahedral geometry. A fit to the variable-temperature magnetic susceptibility data for 1 revealed the presence of weak antiferromagnetic coupling of within the cluster, giving rise to an S=21/2 ground state. In addition, variable-field magnetization data collected at low temperatures revealed the presence of magnetic anisotropy in the ground state, with the best fit yielding zero-field splitting parameters of D=+0.19 cm⁻¹ and A reaction intended to produce a direct analogue of 1 by employing [Fe(CN)₆]³⁻ in place of [Cr(CN)₆]³⁻ instead gave an unusually complex compound of formula {Fe(CN)₄[CNMn(salen)(MeOH)]₂}{[Mn(salen)(H₂O)]₂}[Mn(salen)(H₂O)(MeOH)]₂[Fe(CN)₆]·4H₂O (2). The crystal structure and magnetic properties of this compound are reported.     

High-temperature magnetic properties of noninteracting randomly oriented single-domain Fe3 − δO4 nanoparticles

Magnetic measurements have been performed on 40-nm sphere-like Fe_3 − δO₄ (δ=0.043) nanoparticles using a Quantum Design vibrating sample magnetometer. Coating Fe_3 − δO₄ nanoparticles with SiO₂ effectively eliminates magnetic interparticle interactions so that the coercive field HC in the high-temperature range between 300 K and the Curie temperature (855 K) can be well fitted by an expression for noninteracting randomly oriented single-domain particles. From the fitting parameters, the effective anisotropy constant K is found to be (1.38±0.11)×¹⁰⁵ erg/cm³, which is very close to the bulk magnetocrystalline anisotropy constant of 1.35×¹⁰⁵ erg/cm³. Moreover, the inferred mean particle diameter from the fitting parameters is in quantitative agreement with that determined from transmission electron microscope. Such a quantitative agreement between data and theory suggests that the ensemble of our SiO₂-coated sphere-like Fe_3 − δO₄ nanoparticles represents a good system of noninteracting randomly-oriented single-domain particles.     

Structure and magnetotransport properties of the new quasi-two-dimensional molecular metal β″-(BEDT-TTF)4H3O[Fe(C2O4)3] · C6H4Cl2

The β″-(BEDT-TTF)₄A^I[M^III(C₂O₄)₃] · G(A^I=NH ₄ ⁺ , H₃O⁺, K⁺, Rb⁺; M^III=Fe, Cr; G = “guest” solvent molecule) family of layered molecular conductors with magnetic metal oxalate anions exhibits a pronounced dependence of the conducting properties on the type of neutral solvent molecules introduced into the complex anion layer. A new organic dichlorobenzene (C₆H₄Cl₂)-containing conductor of this family, namely, β″-(BEDT-TTF)₄H₃O[Fe(C₂O₄)₃] · C₆H₄Cl₂, is synthesized. The structure of the synthesized single crystals studied by X-ray diffraction is characterized by the following parameters: a = 10.421(1) Å, b= 19.991(2) Å, c= 35.441(3) Å, β = 92.87(1)°, V= 7374(1) ų, space groupC2/c, and Z = 4. In the temperature range 0.5&;2-300 K, the conductivity of the crystals is metallic without changing into a superconducting state. The magnetotransport properties of the crystals are examined in magnetic fields up to 17 T at T = 0.5 K. In fields higher than 10 T, Shubnikov-de Haas oscillations are detected, and the Fourier spectrum of these oscillations contains two frequencies with maximum amplitudes of about 80 and 375 T. The experimental results are compared with the related data obtained for other phases of this family. The possible structural mechanisms of the effect of a guest solvent molecule on the transport properties of the β″-(BEDT-TTF)₄A^I[M^III(C₂O₄)₃] · G crystals are analyzed.     

Sono-enhanced degradation of dye pollutants with the use of H2O2 activated by Fe3O4 magnetic nanoparticles as peroxidase mimetic

Sono-enhanced degradation of a dye pollutant Rhodamine B (RhB) was investigated by using H₂O₂ as a green oxidant and Fe₃O₄ magnetic nanoparticles (MNPs) as a peroxidase mimetic. It was found that Fe₃O₄ MNPs could catalyze the break of H₂O₂ to remove RhB in a wide pH range from 3.0 to 9.0 and its peroxidase-like activity was significantly enhanced by the ultrasound irradiation. At pH 5.0 and temperature 55 °C, the ultrasound-assisted H₂O₂–Fe₃O₄ catalysis removed about 95% of RhB (0.02 mmol L⁻¹) in 15 min with a apparent rate constant of 0.15 min⁻¹ for the degradation of RhB, being 6.5 and 37.6 folds of that in the simple catalytic H₂O₂–Fe₃O₄ system, and the simple ultrasonic US-H₂O₂ systems, respectively. The beneficial synergistic behavior between Fe₃O₄ catalysis and ultrasonic was demonstrated to be dependent on Fe₃O₄ dosage, H₂O₂ concentration, pH value and temperature. As a tentative explanation, the observed significant synergistic effects was attributed to the positive interaction between cavitation effect accelerating the catalytic breakdown of H₂O₂ over Fe₃O₄ nanoparticles, and the function of Fe₃O₄ MNPs providing more nucleation sites for the cavitation inception.     

In situ Mössbauer spectroscopic study on cobalt and iron molybdates and their mixtures with Bi2(MoO4)3 during propene mild oxidation

Several Co and Fe and mixed Co, Fe molydates have been studied by Mössbauer spectroscopy at 360–415°C in a flow C₃H₆+O₂+N₂ 100/100/560 Torr, with and without adding Bi₂ (MoO₄)₃. It is concluded that cobalt stabilizes Fe²⁺ sites and Bi₂(MoO₄)₃ stabilizes Fe³⁺ in solid solution and it is proposed that Fe²⁺?Fe³⁺ pairs act as active sites in propene mild oxidation.     

Poly(allylamine) Stabilized Iron Oxide Magnetic Nanoparticles

This paper describes a new method for the dispersing and surface-functionalization of metal oxide magnetic nanoparticles (10 nm) with poly(allylamine) (PAA). In this approach, Fe₃O₄ nanoparticles, prepared with diethanolamine (DEA) as the surface capping agent in diethyleneglycol (DEG) and methanol, are ligand exchanged with PAA. This method allows the dispersing of magnetic nanoparticles into individual or small clusters of 2–5 nanoparticles in aqueous solutions. The resulting nanoparticles are water soluble and stable for months. The PAA stabilized Fe₃O₄ nanoparticles are characterized by TEM, TGA, and FT-IR. The PAA-coated Fe₃O₄ nanoparticles will allow further chemical tailoring and engineering of their surfaces for biomedical applications.     

Analysis of XPS spectra of Fe and Fe ions in oxide materials

Samples of the iron oxides Fe_0.94O, Fe₃O₄, Fe₂O₃, and Fe₂SiO₄ were prepared by high temperature equilibration in controlled gas atmospheres. The samples were fractured in vacuum and high resolution XPS spectra of the fractured surfaces were measured. The peak positions and peak shape parameters of Fe 3p for Fe²⁺ and Fe³⁺ were derived from the Fe 3p XPS spectra of the standard samples of 2FeO·SiO₂ and Fe₂O₃, respectively. Using these parameters, the Fe 3p peaks of Fe₃O₄ and Fe_1−yO are analysed. The results indicate that high resolution XPS techniques can be used to determine the Fe²⁺/Fe³⁺ ratios in metal oxides. The technique has the potential for application to other transition metal oxide systems.     

Green synthesis of silver and gold nanoparticles using Rosa damascena and its primary application in electrochemistry

Biosynthesis and characterizations of nanoparticles have become an important branch of nanotechnology. In this paper, green synthesis of gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs) using the flower extract of Rosa damascena as a reducing and stabilizing agent, has been discussed. This approach is simple, cost-effective and stable for a long time, reproducible at room temperature and in an eco-friendly manner to obtain a self-assembly of AuNPs and AgNPs. The resulting nanoparticles are characterized using UV–vis, TEM, XRD and FT-IR spectroscopic techniques. A modified glassy carbon electrode using AuNPs (AuNPs/GCE) was investigated by means of cyclic voltammetry in a solution of 0.1 M KCl and 5.0×10⁻³ M [Fe(CN)₆]^3−/4−. The results show that electronic transmission rate between the modified electrode and [Fe(CN)₆]^3−/4− increased.     

Ni-Al layered double hydroxides modified with citrate, malate, and tartrate: Preparation by coprecipitation and uptake of Cu from aqueous solution

We report on aqueous Cu²⁺ uptake by Ni-Al layered double hydroxides (Ni-Al LDHs) modified with citrate (C₆H₅O₇³⁻), malate (C₄H₄O₅²⁻), and tartrate (C₄H₄O₆²⁻) anions via coprecipitation. Dropwise addition of a mixed aqueous solution of Ni(NO₃)₂ and Al(NO₃)₃ to the respective organic acid solutions at a constant pH of 7.0-9.0 afforded LDHs with intercalated C₆H₅O₇³⁻ and Ni(C₆H₅O₇⁾⁻, C₄H₄O₅²⁻, and C₄H₄O₆²⁻ in their interlayers. The anions were also likely adsorbed on the LDH surface. Citrate·Ni-Al LDH could rapidly take up Cu²⁺ at a constant pH of 5.0, mainly via chelation by the intercalated and adsorbed anions, rather than coprecipitation with dissolved Al³⁺ to form Cu-Al LDH. By contrast, malate and tartrate were not active as chelating agents, probably because they formed bridges between brucite-like layers by direct coordination of the two −COO⁻ groups with Al³⁺ in those layers.     

Synthesis of Co-Cu-Zn doped Fe3O4 nanoparticles with tunable morphology and magnetic properties

Co-Cu-Zn doped Fe₃O₄ nanoparticles can be successfully synthesized using a simple method. The particles in the size range 20−400 nm with different regular shapes i.e. sphere-like, regular hexane and tetrahedron are controllably achieved by changing the metal ion concentration. Compared to pure Fe₃O₄ without dopants, Co-Cu-Zn doped Fe₃O₄ nanoparticles exhibit better microwave absorbing properties at 2−18 GHz. Among three Co-Cu-Zn doped Fe₃O₄ nanoparticles with different morphologies, tetrahedral Co-Cu-Zn doped Fe₃O₄ nanoparticles represent a better dielectric loss in high frequency range. This work is believed the first known report of Co-Cu-Zn doped Fe₃O₄ nanoparticles with tunable morphology and magnetic properties through the hydrothermal process without using any organic solvents, organic metal salts or surfactants.