Co-induced nano-structures on Si(1 1 1) surface

The interaction of cobalt atoms with silicon (1 1 1) surface has been investigated by means of scanning tunneling microscopy (STM) and low-energy electron diffraction (LEED). Besides the Co silicide islands, we have successfully distinguished two inequivalent Co-induced reconstructions on Si(1 1 1) surface. Our high-resolution STM images provide some structural properties of the two different derived phases. Both of the two phases seem to form islands with single domain. The new findings will help us to understand the early stage of Co silicide formations.     

Surface restructuring process on a Ag/Ge(0 0 1) surface studied by photoelectron spectroscopy

The atomic structure and charge distribution of Ag adsorbed Ge(0 0 1) surfaces have been investigated by means of Ge 3d core- and Ag 4d core-levels photoelectron spectroscopy. A mono-atomic layer of Ag was deposited on the clean Ge(0 0 1) c(4×2) surface at 80 K. The Ge 3d spectrum measured at 80 K was deconvoluted into two surface components, which is consistent with the previously proposed Ag ad-dimer model. After annealing the surface at room temperature, the rearrangement of the charge distribution was revealed to include electron transfer from Ge to Ag in conjunction with the surface restructuring process by the annealing.     

Band alignments at SrZrO3/Ge(0 0 1) interface: Thermal annealing effects

High-κ dielectrics SrZrO₃ were prepared on Ge(0 0 1) substrate using pulse laser deposition, and band alignments and thermal annealing effects were studied with high resolution X-ray photoemission spectroscopy. Valence and conduction band offsets at this interface were measured to be 3.26 eV and 1.77 eV, respectively. Interfacial Ge oxide layers were found at the interface. After annealing at 600 °C, the interfacial Ge oxide layers were eliminated, and the valence band offset increased to 3.50 eV, but the amorphous SrZrO₃ became polycrystalline in the meantime.     

Electronic structure of dysprosium silicide films grown on a Si(1 1 1) surface

The thickness-dependent electronic structures of Dy silicide films grown on a Si(1 1 1) surface have been investigated by angle-resolved photoelectron spectroscopy. Two (1×1) periodic bands, both of them cross the Fermi level, have been observed in the silicide films formed by Dy coverages of 1.0 monolayer and below, and more than five () periodic bands have been observed in thicker films. Taking the () periodic structure of Dy atoms in the submonolayer silicide film into account, the periodicity of the two metallic bands indicate that they mainly originate from the orbitals of Si atoms, which form a (1×1) structure. Of the () periodic bands observed in thick films, four of them are well explained by the folding of the (1×1) bands into a () periodicity. Regarding the other band, the three () periodic bands would originate from the electronic states related to the inner Si layers that form a () structure, and the one observed in the 3.0 ML film only might originate from the electron located at the interface between bulk Si and the Dy silicide film.     

In situ observation of a Au (1 1 1) electrode surface using the X-ray reciprocal-lattice space imaging method

A rapid X-ray diffraction method was proposed for in situ observation of a surface-intermediate structure on a liquid-solid interface. It used a combination of higher-energy monochromatic synchrotron X-rays in grazing incidence and an X-ray two-dimensional detector. Overall patterns were in situ taken, with one-time exposure, of the reciprocal-lattice space of a Au (1 1 1) electrode surface which was fixed at an angular position. We deduced change in crystal domain shapes of surface intermediates as well as its smaller lattice distortion by observing images of reconstructed surface rods during a surface-structural phase transition from the reconstructed surface to the bulk terminated surface. An anisotropic shape of surface-crystal domains was also observed.     

Aluminium adsorption on Ir(1 1 1) at a quarter monolayer coverage: A first-principles study

We present an ab initio density-functional study for aluminium adsorption on Ir(1 1 1) at high symmetry sites, namely, the fcc-, hcp-hollow, top and bridge sites. In each case, we calculate the atomic geometry, average binding energy, work function, and surface dipole moment at the coverage of 0.25 monolayer. We find the favourable structure to be Al at threefold hcp-hollow site, with a corresponding binding energy of 4.46 eV. We present and compare the electronic properties of the two lowest energy structures, i.e., at the threefold hollow sites and discuss the nature of the Al-Ir bond and binding site preference. In particular, we observe a large hybridization of Al-3s, 3p and Ir-5d states near Fermi level, forming an inter-metallic bonds. This results in a significant electron transfer from the Al atoms to the Ir(1 1 1) substrate, inducing an outward pointing surface dipole moment and a large decrease in the work function of 1.69 eV for Al in the hcp-hollow site. Compared to the fcc-hollow site, adsorption in the hcp-hollow site results in a lower density-of-states at the Fermi level, as well as a greater hybridization in the bonding states.     

Damping of the domain walls motion in Co-based amorphous ribbons with helical magnetic anisotropy: Part III

The damping of the motion of domain walls of a sandwich domain structure by the eddy currents magnetic fields, the stray fields and the hysteresis friction fields is investigated. The blocking of the motion of domain walls by the eddy currents magnetic fields is discovered.     

Temperature dependent photoluminescence down to 4.2 K in EuTFC

The temperature dependence of photoluminescence in Europium tris[3-(trifluoro-methylhydroxymethylene)-(+)-camphorate] (EuTFC) embedded in polymer films has been examined from 40 K down to 4.2 K with the goal of preparing sensor films for low-temperature thermal imaging. The behavior of EuTFC showed significant difference when based on polystyrene compared to poly(n-alkyl methacrylate)s. In poly(n-alkyl methacrylate)s prepared by standard methods for imaging applications, the photoluminescence is fully saturated below 30 K, whereas in polystyrene films there is a strong temperature dependence even down to 4.2 K. By optimizing the preparation procedure for films made of poly(butyl methacrylate) (PBMA) and poly(methyl methacrylate), also these polymers became very sensitive down to liquid helium temperature. The maximum temperature sensitivity of EuTFC in PBMA is found to be 1.0%/K at 4.2 K. The problem of delamination and cracking of the polymer film at cryogenic temperature is also avoided by the special preparation method.     

Chemically abrupt interface between Ce oxide and Fe films

A chemically abrupt Fe/Ce oxide interface can be formed by initial oxidation of an Fe film followed by deposition of Ce metal. Once a Ce oxide layer is formed on top of Fe, it acts a passivation barrier for oxygen diffusion. Further deposition of Ce metal followed by its oxidation preserve the abrupt interface between Ce oxide and Fe films. The Fe and Ce oxidation states have been monitored at each stage using X-ray photoelectron spectroscopy.     

Effects of hyperthermal proton bombardment on alkanethiol self-assembled monolayer on Au(1 1 1)

The effects of hyperthermal proton bombardment on alkanethiol self-assembled monolayer (SAM) on Au(1 1 1) are studied with scanning tunneling microscopy (STM) and X-ray photoemission spectroscopy (XPS). The STM and XPS results show that proton bombardment with proton energy as low as 2 eV can induce cross-linking of the adsorbed alkanethiols and transform the original ordered SAM lattice to an array of nanoclusters of the cross-linked alkanethiols. For a bombardment at 3 eV with a fluence of 3×10¹⁵ cm⁻², the typical cluster size is about 5 nm. In addition, the cluster size distribution is narrow, with no cluster larger than 8 nm. The cluster growth can be promoted by increasing the fluence at a fixed bombardment energy or increasing the energy at a fixed fluence. This indicates that surface diffusion of alkanethiols and cluster growth can be harnessed by the control of the bombardment energy and fluence.     

Atomic structure of CaF2/MnF2-Si(1 1 1) superlattices from X-ray diffraction

X-ray reflectivity and non-specular crystal truncation rod scans have been used to determine the three-dimensional atomic structure of the buried CaF₂-Si(1 1 1) interface and ultrathin films of MnF₂ and CaF₂ within a superlattice. We show that ultrathin films of MnF₂, below a critical thickness of approximately four monolayers, are crystalline, pseudomorphic, and adopt the fluorite structure of CaF₂. High temperature deposition of the CaF₂ buffer layer produces a fully reacted, CaF₂-Si(1 1 1) type-B interface. The mature, “long” interface is shown to consist of a partially occupied layer of CaF bonded to the Si substrate, followed by a distorted CaF layer. Our atomistic, semi-kinematical scattering method extends the slab reflectivity method by providing in-plane structural information.     

Magnetic properties of a ferrimagnetic core/shell nanocube Ising model: A Monte Carlo simulation study

Monte Carlo simulation has been used to study the magnetic properties and hysteresis loops of a single nanocube, consisting of a ferromagnetic core of spin- surrounded by a ferromagnetic shell of spin-1 with antiferromagnetic interface coupling. We find a number of characteristic phenomena. In particular, the effects of the shell coupling and the interface coupling on both the compensation temperature and the magnetization profiles are investigated. The effects of the interface coupling on the hysteresis loops are also examined.     

Thickness and temperature dependence of the dynamic magnetic behavior in disordered FePt films

We present in this work an investigation of the magnetic behavior of FePt films as a function of film thickness and thermal treatment. The films have been sputter-deposited on oxidized Si (1 0 0) crystals and are ferromagnetic at room temperature. Using ferromagnetic resonance techniques at 9.5 GHz we have studied a series of four films with a thickness in the range . The resonance spectra of these films were measured at and also above room temperature. The high temperature measurements produce irreversible changes in the samples which depend on the maximum temperature reached during the experiment. For relatively low measuring temperatures () the magnetic properties are generally improved, probably due to the release of stress formed during film fabrication. For larger temperatures () the absorption linewidth gradually broadens and the line could be hardly observed at room temperature if the measuring temperature exceeded . This behavior is due to the partial transformation of the metastable FCC phase to the ordered L1₀ high anisotropy phase. These data are consistent with the results found in samples annealed outside the resonant cavity.     

Magnetic ground state and spin waves in A(A = K, Rb or Cs)Fe1.5Se2

We present theoretical results on the ground state phase diagram, spin waves and dynamic structure factor on the J₁-J₂ model. In the reasonable physical parameter region corresponding to AFe_1.5Se₂, the A-collinear antiferromagnetic phase is stable. The spin wave spectra have two acoustic branches and four optical branches for this phase on the rhombus-ordered vacancy lattice, and each of them is twofold degenerate. However, they have one nondegenerate acoustic branch and two nondegenerate optical branches on the square-ordered vacancy lattice. To offer the theoretical guidance for the further experiments, we also discuss the magnetic excitation spectra and the inelastic neutron scattering pattern based on linear spin wave theory.     

Measurement of the F5/2 and H(2)9/2 manifold lifetime in Nd:YLiF4

We present direct measurements of the lifetime of the ⁴F_5/2 and ²H(2)_9/2 manifold in Nd³⁺:YLiF₄, using a fluorescence pump-probe technique. The technique populates the ⁴F_5/2 and ²H(2)_9/2 manifold directly with a pump pulse. Via excited state absorption from this excited manifold, the ²F(2)_5/2 manifold of Nd³⁺ is populated with a delayed probe pulse. The population in the ⁴F_5/2 and ²H(2)_9/2 manifold is monitored as a function of time by observing the change in integrated UV fluorescence from the ²F(2)_5/2 manifold for each time delay between pump and probe pulses. The pump and probe beams come from the fundamental and second harmonic wavelengths of a femtosecond Ti:sapphire regenerative amplifier. The measured lifetime agrees well with the energy gap law, based on other nonradiative lifetime measurements from the literature for Nd³⁺:YLiF₄.     

Spectral weights of the 2-dimensional t-J-type models: Wave function study

We examine the distribution of spectral weights (SWs) of the 2-dimensional t-t^′-t^″-J model describing cuprate superconductors in terms of the Gutzwiller projected Fermi liquid, as the possible normal state, and d-wave (superconducting) resonating valence bond state. Treat exactly strong correlation between electrons by numerical approach, we calculate SWs for removing an electron which can be compared with the observation made by the future angle-resolved photoemission spectroscopy experiment.     

Influence of surface heterogeneity in electroosmotic flows—Implications in chromatography, fluid mixing, and chemical reactions in microdevices

We analyze the influence of surface heterogeneity, inducing a random ζ-potential at the walls in electroosmotic incompressible flows. Specifically, we focus on how surface heterogeneity modifies the physico-chemical processes (transport, chemical reaction, mixing) occurring in microchannel and microreactors. While the macroscopic short-time features associated with solute transport (e.g. chromatographic patterns) do not depend significantly on ζ-potential heterogeneity, spatial randomness in the surface ζ-potential modifies the spectral properties of the advection-diffusion operator, determining different long-term properties of transport/reaction phenomena compared to the homogeneous case. Examples of physical relevance (chromatography, infinitely fast reactions) are addressed.     

Nanostructural and surface morphological evolution of chemically sprayed SnO2 thin films

Physical properties of a nanocrystalline thin film is greatly influenced by its morphological and structural evolution. We try to understand the transition of SnO₂ thin films from amorphous to nanocrystalline structure with XRD, IR, SEM, AFM and surface profiler studies. A 2D layer like structure resulting from quantum confinement is found for the films prepared at 400 °C. We observed a new IR band at 530 cm⁻¹ that was theoretically predicted and report it for the first time. A correlation of population of defects in SnO₂ films with change in lattice parameters and FWHM of IR bands are reported. The electric and optical properties of the films have been discussed.     

Point-contact study of the heavy-fermion superconductor CeCoIn5

We have investigated the differential conductance spectra of the point contacts between the heavy-fermion superconductor CeCoIn₅ and Pt. Many of them show a double-maximum structure that indicates the superconducting energy gap Δ. The Δ values derived using Blonder-Tinkham-Klapwijk model, however, varies from 0.47 to 0.77 meV, and yet they are within the scatter of the reported values. The evolution of Δ below T_c is slow as compared with that of BCS gap probably reflecting the unconventional superconductivity in CeCoIn₅.     

Scanning tunneling microscopy/spectroscopy on Au nanoparticles assembled using lauryl amine (LAM) and octadecane thiol (ODT)

In this report, we demonstrate scanning tunneling microscopy and spectroscopy on thin films of lauryl amine (LAM) and octadecane thiol (ODT) protected gold nanoparticles. We show that the zero current in the I-V curves (measure of Coulomb blockade (CB) of the nanoparticles) depends on the properties of the spacer molecule. In both the cases the gap voltage and the tunneling current at which the images are obtained are quite different which is further confirmed from the fitting performed based on the orthodox theory. The values for the capacitance and charging energy obtained from the fitting for ODT capped particles are comparable to the values obtained using spherical capacitor model. In contrast, values of these parameters were found to differ for LAM capped nanoparticles. While imaging, ODT capped nanoparticles were observed to drag along the scan direction leading to ordering of particles. Images of LAM capped gold nanoparticles show local ordering in self-assembly of particles although no evidence of large scale ordering in spatial Fourier transform was seen. These observations suggest that nanoparticles with larger CB would be imaged nonevasively in contrast to small CB systems for which tip induced effects will be dominant. In both the systems the current was found to rise faster than theoretical curves based on the orthodox theory suggesting that mechanism of charge transfer in this case may involve field emission rather than tunneling through a rectangular barrier. An attempt has been made to explain charge transfer based on Fowler-Nordheim (F-N) plots of the I-V curves.