Bis(fluoroalkyl)acrylic and methacrylic phosphate monomers, their polymers and some of their properties

Ten fluoromonomers of structure (R_FO)₂P(O)OCH₂CH₂OC(O)CRCH₂ were made in 30-64% yield by treating the chloridates (R_FO)₂P(O)Cl with HOCH₂CH₂OC(O)CRCH₂ in chloroform in the presence of triethylamine [R_F=CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, C₄F₉CH₂, C₄F₉CH₂CH₂ or C₆F₁₃CH₂CH₂; R  H or Me]. The chloromonomer (CCl₃CH₂O)₂P(O)OCH₂CH₂OC(O)CHCH₂ was obtained analogously in 29% yield. Polymerisation of the acrylate monomers, but not the methacrylate monomers, could be effected using α-azoisobutyronitrile as a radical initiator. Acrylic polymers having CF₃CH₂O, CCl₃CH₂O and C₆F₁₃CH₂CH₂O side-chains were obtained as translucent rubbers. Specimens of cotton fabric were treated with solutions of the polymers, and average water and oil repellency ratings measured. Fabric coated with the polymer with the C₆F₁₃CH₂CH₂O side-chain afforded protection from penetration of the test liquids. Treated fabrics were subjected to the limiting oxygen index (LOI) test according to BS EN ISO 4589-2 (1999): this test determines the point at which a material just burns in a volumetric flow of oxygen and nitrogen. The treated fabrics were more fire-resistant (LOI 22-29%) than the untreated fabric (LOI 18%). Fabric coated with the CCl₃CH₂O-based polymer can be considered fire-retardant (LOI 29%). The fluoromonomers were tested for anti-acetylcholinesterase activity and were found to be poor enzyme inhibitors; they are predicted to possess low acute toxicity.     

Reaction of syndiotactic poly(methacrylic acid hydrazide) with functional carboxylic acids

As a highly reactive tactic vinyl polymer, syndiotactic poly(methacrylic acid hydrazide) (s-PMH) was prepared from syndiotactic poly(methyl methacrylate) (s-PMMA) by hydrazinolysis. The s-PMH served as the starting polymer to prepare other tactic vinyl homopolymers having optically active functional carboxylic acids or N-protected amino acids as side chains. The condensation of the acids was carried out in water by water-soluble carbodiimides. Conversion was followed by pH and the resulting homopolymers characterized by ¹H- and ^13C-NMR spectroscopy. The NMR-spectra were assigned by comparison with low molecular weight model compounds, derived from pivalic acid hydrazide. In a third on-polymer reaction, the OH-groups present in the side chains of some of the polymers were employed for adding an optically active isocyanate to yield branched side chains.     

Complexation between poly(methacrylic) and poly(acrylic) acids and star-shaped poly(ethylene glycol) based on pyrogallol

Complex formation between polymethacrylic (PMAA) and polyacrylic acids, and star-shaped poly(ethylene glycol) prepared by ethoxylation of pyrogallol (Pyr–PEG) has been studied viscometrically and by potentiometric titration in water solution. The competitive ability of Pyr–PEG and of the derivatives of the ethoxylation of phenol and hydroquinone in complex formation with PMAA has been compared by UV spectroscopy. Pyr–PEG turns out to be the weakest competitor because of its chemical structure. © 1996 John Wiley & Sons, Inc.     

Polymerization of vinyl monomers initiated by organoaluminium compounds/benzoyl peroxide systems

The free-radical polymerization of methyl methacrylate (MMA) initiated by systems comprizing benzoyl peroxide (BPO) and different organoaluminium compounds (OACs) has been studied. The influence of the type of OAC, concentration of components of the initiation system, temperature, and time on the reaction yield have been determined. Systems containing BPO and diethylaluminium chloride (Et₂AlCl) have been found to enable us to obtain, in high yields at room temperature, of homopolymers of MMA, methyl acrylate, acrylonitrile (AN), vinyl acetate, and the alternating AN/styrene (St) copolymer; they are, however, not very active in the homopolymerization of St and vinyl chloride. Factors affecting the polymerization yield have been discussed in terms of the mechanism of the reaction between BPO and OACs, reactivity of alkyl radicals formed in these systems, and catalytic effect of OAC in the propagation step.     

Comparison of the different emulsion polymerization routes between acrylic and vinyl acetate monomers using poly(vinyl alcohol) as the sole stabilizer

The emulsion polymerization of acrylic and vinyl acetate monomers using poly(vinyl alcohol) (PVA) as protective colloid has been studied for a long time, whereas rare reports ranged over the lateral comparison of the two systems and the reason for the unstability of the PVA/MMA polymerization system was still indistinct. Here in this paper, a collection of experiments of methyl methacrylate (MMA) and vinyl acetate (VAc) were performed respectively with varied amount of PVA as the sole stabilizer. The grafting extent of the polymerisate was characterized through the fraction and FTIR and it was found that the grafted amount of PVA was even larger in the PVA/MMA copolymers than PVA/VAc copolymers, so the grafted mode of PVA was considered. Based on the kinetics, the slower initiation rate of sulfate radical towards MMA was found to be responsible for the unstability of corresponding colloids accompanied with the relatively quicker hydrogen abstraction of radical to PVA, which resulted in “layer-by-layer” grafting structure inside and the particle surface-grafting density was lowered thereof. This was proved with TEM and static contact angle measurements and a pseudo-homopolymer model was employed to describe the relationship of colloidal stability and the PVA density on surfaces.     

Gamma radiation induced graft copolymerization of vinyl monomers onto poly(vinyl alcohol)

In an attempt to modify water-soluble synthetic polymers, graft Copolymerization of methylmethacrylate (MMA) and ethyl acrylate (EA) onto poly(vinyl alcohol), PVA, has been studied by using gamma irradiation from a Co⁶⁰ source as initiator. The graft copolymerization was carried out in an aqueous medium by the mutual method in air. The effect of total dose and concentration of vinyl monomers on percentage of grafting has been determined. Water plays a significant role in the enhancement of graft copolymerization and the optimum amount of water to afford maximum grafting has been evaluated. The effect of CH₃OH on aqueous grafting of MMA and EA by radiation method has been studied. The graft copolymer has been characterized by IR spectroscopic and thermogravimetric methods.     

Thermodynamic studies of some complexation systems involving methacrylic acid-acrylamide copolymer,poly(vinyl pyrrolidone) and poly(ethylene oxide)

Interpolymer complexes of methacrylic acid-acrylamide copolymer have been prepared by the interaction of its comonomer units with two different homopolymers, and also with a single homopolymer. The stability constants and related thermodynamic parameters (e.g., ΔH⁰ and ΔS⁰) of the mixed complex were found to be significantly different from the single homopolymer complexes. This has been attributed to neighboring group influence and destabilization of various interacting forces at different temperatures. © 1994 John Wiley & Sons, Inc.     

Effect of urea on poly(methacrylic acid) and poly(acrylic acid) aqueous solutions

The effects of urea on aqueous solutions of both poly(methacrylic acid (PMA) and poly(acrylic acid) (PAA) have been investigated by using potentiometry, viscometry and study of the fluorescence of Auramine O, a cationic dye. The viscosity behaviour of unionized PMA obtained from direct dissolution of solid powder shows that the unneutralized macromolecules can be associated in water. The stability of such “aggregates” seems weak as indicated by their disappearance as soon as the charge density is very low. For PMA salt solution percolated through a cation (H⁺) exchange resin column, no association is observed. The pH-dependent conformational behaviour of PMA which, contrary to PAA, presents compact conformations in water at low charge density is discussed in terms of solvophobic/solvophilic interactions. It is shown that, even for urea concentration up to 8 M, the compact conformations of PMA are not completely destroyed. The formation of H⁺/urea complex is taken into account.     

Reversible pH-controlled switching of poly(methacrylic acid) grafts for functional biointerfaces

Responsive polymeric brushes of poly(methacrylic acid) (PMAA) were grafted from silicon surfaces using controlled surface-initiated atom-transfer radical polymerization (SI-ATRP). The growth kinetics of PMAA was investigated with respect to the composition of the ATRP medium by grafting the polymer in mixtures of water and methanol with different ratios. The dissociation behavior of the polymer layers was characterized by FTIR titration after incubating the polymer-grafted substrates in PBS buffer solutions with different pH values. PMAA layers show a strong pH-dependent behavior with an effective pK(a) of the bulk polymer brush of 6.5 ± 0.2, which is independent of the polymer brush thickness and methanol content of the ATRP grafting medium. The pH-induced swelling and collapse of the grafted polymer layers were quantified in real time by in situ ellipsometry in liquid environment. Switching between polymer conformations at pH values of 4 and 8 is rapid and reversible, and it is characterized by swelling factors (maximum thickness/minimum thickness) that increase with decreasing the methanol content of the SI-ATRP medium.     

Calorimetric investigation of poly(methacrylic acid) and poly(acrylic acid) in aqueous solution

The enthalpy of dissociation of poly(acrylic acid) and of poly(methacrylic acid) in water and in 0.5N NaCl at 25°C has been measured over a wide range of degrees of neutralization of the polyelectrolytes. In the case of poly(methacrylic acid) the calorimetric data permit the direct evaluation of the enthalpy of conformational transition of the polymer. For this transition, with the aid of standard free energy data derived from potentiometric titrations, the change in entropy was also estimated. The relative accuracy of the thermodynamic data, and the possibility of deriving therefrom information on the mechanism of transitions of the type, globular coils → expanded coils for partially hydrophobic synthetic polyelectrolytes in aqueous solution are discussed.     

The synthesis and characterization of monodisperse poly(acrylic acid) and poly(methacrylic acid)

A number of polyacrylic (PAA) and polymethacrylic (PMAA) acids have been synthesized by living anionic polymerization of the monomeric tert-butyl esters followed by subsequent hydrolysis of the corresponding polyesters. The necessary precautions were taken in order to assure good molecular weight control, as well as high yields in the polymerization reactions. The intermediate and final polymers were characterized by gel permeation chromatography and NMR-H¹ spectrometry.     

New fluorinated acrylic monomers for the surface modification of UV‐curable systems

New fluorinated acrylates were synthesized and used as modifying additives for acrylic UV‐curable systems. Their chemical structure is: C_nF_2n+1 R—OCO—CHCH₂, where the linear perfluorinated chain contains from 4 to 10 carbon atoms, while R is a linear alkyl group containing or not a thioether group. Notwithstanding their very low concentration, the fluorinated monomers caused a dramatic change of the surface properties of the films, without changing their curing conditions and their bulk properties. X‐ray photoelectron spectroscopy measurements showed that the monomers were able to concentrate selectively on the surfaces of the films, depending on their chemical structure and on the kind of substrate employed. The synthesis of the fluorinated monomers and the relationship between their chemical structure and the final surface properties of the UV‐cured films will be discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 77–87, 1999     

ATRP法合成聚去氢枞酸丙烯酸乙二醇酯的研究

本研究从歧化松香中提取的去氢枞酸(DHA)出发,经酰氯化后与丙烯酸(2-羟基)乙酯反应,合成了去氢枞酸丙烯酸乙二醇酯(DHAAGE);并以此为单体,2-溴-异丁酸乙酯(EBr-iB)为引发剂,CuBr/2,2'-联吡啶(2,2'-bipyridine)为催化体系,在90 oC下,利用原子转移聚合(ATRP)法制备了聚去氢枞酸丙烯酸乙二醇酯(PDHAAGE).利用FT-IR、1H-NMR和GPC对所制备的单体和聚合物进行了表征,同时考察了单体转化率随聚合反应时间的变化.结果表明,聚合反应动力学曲线呈良好线性关系,表观聚合速率常数kp′为3.6 ×10-7 s-1;所得聚合物的分子量分布很窄.     

Binding of a surfactant counterion to low-charge-density poly(acrylic acid) and poly(methacrylic acid)

The binding of a cationic surfactant, dodecylpyridinium (C12Py) chloride, with a low-charge-density poly (methacrylic acid) (PMA) was investigated in buffer solutions under the condition of constant pH. The binding isotherms with PMA consisted of two and three steps at a pH lower and higher than 3.2, respectively. Bindings in the first step were independent of pH and this step was considered to correspond to the solubilization of the hydrocarbon chains of C12Py into the nonpolar region of the compact form of PMA. This is the indication of the compact form from the binding isotherm. At pH higher than 3.2, the second step was discriminated and it depended on the pH. In the third step, a sharp rise in the degree of binding (β) was observed accompanying the solubilization of the precipitates of the PMA–C12Py complex. The binding with poly(acrylic acid) (PAA) and PMA in conventional unbuffered NaCl solutions was also examined and the pH profile of the solution during the binding process was determined. In the case of unbuffered NaCl solutions, the binding with PAA took place cooperatively at the critical association concentration (cac). The binding isotherm consisted of two steps and the pH decreased with the increase in β. The binding isotherm of PMA, on the other hand, consisted of three steps: the pH decreased slightly in the first step and considerably in the second step with the increase in β but it increased with β in the third step, exhibiting a pH minimum around 3.2. The binding in the first step coincided with that obtained in the buffered solutions. Linear relationships between β and the pH were found for both polymers. In the case of PMA, no cac was observed in both buffered and unbuffered NaCl solutions. Received: 24 January 2001 Accepted: 23 May 2001     

Self-assembly and influence of the organic counterion in the ternary systems dodecylamine/acrylic acid/water and dodecylamine/methacrylic acid/water

Due to complete proton transfer from the acid to the amine, a reaction between an equimolar mixture of dodecylamine and (meth)acrylic acid leads to the formation of dodecylammonium (meth)acrylate. The latter can be considered as a surfactant with a polymerizable organic counterion. The ternary phase diagrams of the two systems dodecylamine/acrylic acid/water and dodecylamine/methacrylic acid/water are described. Both systems can form isotropic solutions and lyotropic liquid crystalline lamellar phases. Moreover, the system with the methacrylate counterion can also form a cubic phase in the water-rich part of the phase diagram. The difference in the self-organization observed for the two systems is explained by the greater bulkiness and hydrophobicity of the methacrylate. Whereas the acrylate counterion behaves rather like a classic inorganic counterion, the methacrylate counterion resides in the outermost part of the aggregates, giving rise to a change in the surface curvature.     

Synthesis of double hydrophilic graft copolymer containing poly(ethylene glycol) and poly(methacrylic acid) side chains via successive ATRP

A well‐defined double hydrophilic graft copolymer, with polyacrylate as backbone, hydrophilic poly(ethylene glycol) and poly(methacrylic acid) as side chains, was synthesized via successive atom transfer radical polymerization followed by the selective hydrolysis of poly(methoxymethyl methacrylate) side chains. The grafting‐through strategy was first used to prepare poly[poly(ethylene glycol) methyl ether acrylate] comb copolymer. The obtained comb copolymer was transformed into macroinitiator by reacting with lithium diisopropylamine and 2‐bromopropionyl chloride. Afterwards, grafting‐from route was employed for the synthesis of poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methoxymethyl methacrylate) amphiphilic graft copolymer. The molecular weight distribution of this amphiphilic graft copolymer was narrow. Poly(methoxymethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections. The final product, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methacrylate acid), was obtained by selective hydrolysis of poly(methoxymethyl methacrylate) side chains under mild conditions without affecting the polyacrylate backbone. This double hydrophilic graft copolymer was found be stimuli‐responsive to pH and ionic strength. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4056–4069, 2008     

Solution polymerization of vinyl monomers in the presence of poly(N-acetyliminoethylene) macroazoinitiators

New block copolymers with poly(N-acetyliminoethylene) and vinyl sequences were obtained by a two-step synthetic approach. In the first stage macroinitiators of poly(N-acetyliminoethylene) type, with azo groups inserted in the main chain, were prepared. They were latter used in the radical polymerization of some vinyl monomers [styrene, methacrylic acid, methyl methacrylate, butyl methacrylate, β-(N-carbazolyl)ethyl acrylate, β-(methacryloyfoxy)ethyl 3,5-dinitrobenzoate]. The resulting block copolymers were characterized by spectral methods, elemental analysis, gel permeation chromatography, and electron microscopy. The kinetic study of the thermal and photochemical decomposition of the synthesized macroazoinitiators, as well as the polymerization data, suggest a dependence of their initiating efficiency on the length of the poly(N-acetyliminoethylene) segments. © 1994 John Wiley & Sons, Inc.