单晶Au表面和Au/TiO2（110）模型催化剂表面CO氧化反应机理和活性位

在分子尺度上介绍了Au/TiO2(110)模型催化剂表面和单晶Au表面CO氧化反应机理和活性位、以及H2O的作用.在低温(<320 K), H2O起着促进CO氧化的作用, CO氧化的活性位位于金纳米颗粒与TiO2载体界面(Auδ+–Oδ––Ti)的周边. O2和H2O在金纳米颗粒与TiO2载体界面边缘处反应形成OOH,而形成的OOH使O–O键活化,随后OOH与CO反应生成CO2.300 K时CO2的形成速率受限于O2压力与该反应机理相印证.相反,在高温(>320 K)下,因暴露于CO中而导致催化剂表面重组,在表面形成低配位金原子.低配位的金原子吸附O2,随后O2解离,并在金属金表面氧化CO.     

用辛烷基硫醇单层保护Au纳米粒子制备CO氧化催化剂Au/γ-Al2O3

采用两相法合成出含活性组分Au的辛烷基硫醇单层保护Au纳米粒子(C8AuNPs)的正己烷溶胶, 用“逐次浸润”法将C8AuNPs负载在γ-Al2O3上, 经真空干燥及活化处理制得Au/γ-Al2O3催化剂. 所制得的Au催化剂前体C8AuNPs/γ-Al2O3表面Au粒子平均粒径可控制在2-3 nm范围内, 且分布比较单一; 催化剂活性评价600 h后, 其表面Au的粒径仍主要分布在2-4 nm范围内; 真空干燥温度影响Au催化剂的粒子尺寸和催化活性, 随着真空干燥温度的提高, Au纳米粒子的粒径增大. 将所制备的催化剂用于低温CO氧化反应, 催化活性评价结果表明, 经25 ℃真空干燥制得的2.5%(质量分数, w)Au/γ-Al2O3具有较高的活性和长期稳定性, 其催化CO完全转化的最低温度为-19 ℃, 在15 ℃下CO完全转化时Au/γ-Al2O3的单程寿命至少900 h; 4.0%(w) Au/γ-Al2O3在15 ℃和进料中含水条件下对CO完全氧化的单程寿命不低于2000 h, 可见催化剂具有强的抗潮湿中毒特性. 综合上述实验结果, 讨论了影响Au/γ-Al2O3催化剂活性的可能因素.     

焙烧温度对Au/Fe2O3选择性氧化富氢气体中CO催化性能的影响

甲醇重整在线制氢作为质子交换膜燃料电池的燃料成为当前研究的热点。受重整反应动力学及热力学的限制，使得甲醇重整气(富氢气体)中除含有大量的氢气外还含有少量的CO，CO极易吸附在燃料电池阳极催化剂表面，使电池性能下降，因而必须去除重整气中的CO，选择性氧化脱除富氢气     

Chemiluminescent reactions induced by gold nanoparticles

The reaction of gold nanoparticles with a potassium periodate-sodium hydroxide-carbonate system undergoes chemiluminescence with three emission bands at 380-390, 430-450, and 490-500 nm, respectively. It was found that the light intensity increased linearly with the concentration of the gold nanoparticles, and the CL intensity increased dramatically when the citrate ions on the nanoparticle surface were replaced by SCN(-). The shape, size, and oxidation state of gold nanoparticles after the chemiluminescent reaction were characterized by UV-visible absorption spectrometry, transmission electron microscopy (TEM), and X-ray photoelectron spectrometry (XPS). Gold nanoparticles are supposed to function as a nanosized platform for the observed chemiluminescent reactions. A chemiluminescent mechanism has been proposed in which the interaction between free CO(3)(*-) and O(2)(*-) radicals generated by a KIO(4)-NaOH-Na(2)CO(3) system and gold nanoparticles results in the formation of emissive intermediate gold(I) complexes, carbon dioxide dimers, and singlet oxygen molecular pairs on the surface of the gold nanoparticles. This work is not only of great importance for gaining a better understanding of the unique optical and surface properties and chemical reactivity of nanoparticles but also of great potential for developing new biosensing and immunolabeling technologies.     

Predicting the shape and structure of face-centered cubic gold nanocrystals smaller than 3 nm.

Although a number of computational studies have examined the relative stability of icosahedral and decahedral gold clusters from 1 to 3 nm in size, few studies have focussed on the variety of face-centered cubic (fcc) nanoparticles in this size regime. In most cases small fcc gold particles are assumed to adopt the truncated octahedral shape, but in light of the fact that the shape and structure of gold nanoparticles is known to vary, the relative stability of fcc polyhedra may change with size. Presented here are results of first-principles calculations investigating the preferred shape of gold particles less than 3 nm in size. Our results indicate that the equilibrium shape of fcc gold nanoparticles less than 1 nm is the cuboctahedron, but this shape rapidly becomes energetically unstable with respect to the truncated octahedron, octahedron and truncated cube shapes as the size increases.     

α-Fe2O3形貌对Au/α-Fe2O3催化一氧化碳氧化反应性能的影响

负载型纳米金催化剂由于其独特的化学性质在一系列氧化反应中受到广泛关注.其中,一氧化碳氧化不仅在实际应用领域(如汽车尾气处理)发挥重要作用,而且作为一种理想的模型反应用以深入研究和理解催化剂的构效关系.为了获得高效的纳米金催化剂,我们需要把金负载到载体上,载体不仅为金的分散提供必要的表面,而且还会和金产生相互作用,这种金...     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]⋅n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was −67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]?n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was ?67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

Yolk-shell gold nanoparticles as model materials for support-effect studies in heterogeneous catalysis: Au, @C and Au, @ZrO2 for CO oxidation as an example

The use of nanostructured yolk-shell materials offers a way to discriminate support and particle-size effects for mechanistic studies in heterogeneous catalysis. Herein, gold yolk-shell materials have been synthesized and used as model catalysts for the investigation of support effects in CO oxidation. Carbon has been selected as catalytically inert support to study the intrinsic activity of the gold nanoparticles, and for comparison, zirconia has been used as oxidic support. Au, @C materials have been synthesized through nanocasting using two different nonporous-core@mesoporous-shell exotemplates: Au@SiO(2)@ZrO(2) and Au@SiO(2)@m-SiO(2). The catalytic activity of Au, @C with a gold core of about 14 nm has been evaluated and compared with Au, @ZrO(2) of the same gold core size. The strong positive effect of metal oxide as support material on the activity of gold has been proved. Additionally, size effects were investigated using carbon as support to determine only the contribution of the nanoparticle size on the catalytic activity of gold. Therefore, Au, @C with a gold core of about 7 nm was studied showing a less pronounced positive effect on the activity than the metal oxide support effect.     

Deposition of gold nanoparticles on silica spheres by electroless metal plating technique

A previously proposed method for metal deposition with silver [Kobayashi et al., Chem. Mater. 13 (2001) 1630] was extended to uniform deposition of gold nanoparticles on submicrometer-sized silica spheres. The present method consisted of three steps: (1) the adsorption of Sn(2+) ions took place on surface of silica particles, (2) Ag(+) ions added were reduced and simultaneously adsorbed to the surface, while Sn(2+) was oxidized to Sn(4+), and (3) Au(+) ions added were reduced and deposited on the Ag surface. TEM observation, X-ray diffractometry, and UV-vis absorption spectroscopy revealed that gold metal nanoparticles with an average particle size of 13 nm and a crystal size of 5.1 nm were formed on the silica spheres with a size of 273 nm at an Au concentration of 0.77 M.     

Phthalocyanine macrocycle as stabilizer for gold and silver nanoparticles

A one-step process was used for the preparation of gold and silver nanoparticles stabilized by an aminophthalocyanine macrocycle. The resultant nanoparticles were characterized by absorption spectra, infrared spectroscopy, scanning electron microscopy and transmission electron microscopy. The nanoparticles were found to possess relatively narrow size distribution. The gold nanoparticles have an average diameter of ~2 nm, while silver particles have 4–5 nm. Preliminary studies on fluorescence and surface enhanced Raman spectroscopy were carried out using these nanoparticles. Fluorescence studies indicate that gold nanoparticles do not quench the fluorescence, while silver nanoparticles do. The stabilized nanoparticles showed enhancement of the Raman signals, thus revealing that they are good substrates for surface enhanced Raman scattering studies.     

Magnetite nanoparticles with tunable gold or silver shell

Fe3O4 nanoparticles with size approximately 13 nm have been prepared successfully in aqueous micellar medium at approximately 80 degrees C. To make Fe3O4 nanoparticles resistant to surface poisoning a new route is developed for coating Fe3O4 nanoparticles with noble metals such as gold or silver as shell. The shell thickness of the core-shell particles becomes tunable through the adjustment of the ratio of the constituents. Thus, the route yields well-defined core-shell structures of size from 18 to 30 nm with varying proportion of Fe3O4 to the noble metal precursor salts. These magnetic nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), FTIR, differential scanning calorimetry (DSC), Raman and temperature-dependent magnetic studies.     

Non-nanogold catalysis of carbon monoxide oxidative amination

Bulk metallic gold particles ( approximately 1000 nm) catalyze the reaction of CO, O2, and primary amines (R-NH2) to give ureas (RNH)2C=O. Isocyanates (R-N=C=O) are identified as intermediates in the reactions and are shown to react with primary and secondary amines to give ureas under the conditions of the gold-catalyzed reactions. Although many recent studies indicate that nanosized particles of gold are required for the catalytic oxidation of CO, the results presented in this paper show that bulk gold is capable of catalyzing the oxidative amination of CO under mild conditions (45 degrees C, 1 atm CO and O2).     

Faraday rotation enhancement of gold coated Fe2O3 nanoparticles: comparison of experiment and theory

Understanding plasmonic enhancement of nanoscale magnetic materials is important to evaluate their potential for application. In this study, the Faraday rotation (FR) enhancement of gold coated Fe(2)O(3) nanoparticles (NP) is investigated experimentally and theoretically. The experiment shows that the Faraday rotation of a Fe(2)O(3) NP solution changes from approximately 3 rad/Tm to 10 rad/Tm as 5 nm gold shell is coated on a 9.7 nm Fe(2)O(3) core at 632 nm. The results also show how the volume fraction normalized Faraday rotation varies with the gold shell thickness. From the comparison of experiment and calculated Faraday rotation based on the Maxwell-Garnett theory, it is concluded that the enhancement and shell dependence of Faraday rotation of Fe(2)O(3) NPs is a result of the shifting plasmon resonance of the composite NP. In addition, the clustering of the NPs induces a different phase lag on the Faraday signal, which suggests that the collective response of the magnetic NP aggregates needs to be considered even in solution. From the Faraday phase lag, the estimated time of the full alignment of the magnetic spins of bare (cluster size 160 nm) and gold coated NPs (cluster size 90 nm) are found to be 0.65 and 0.17 μs. The calculation includes a simple theoretical approach based on the Bruggeman theory to account for the aggregation and its effect on the Faraday rotation. The Bruggeman model provides a qualitatively better agreement with the experimentally observed Faraday rotation and points out the importance of making a connection between component properties and the average "effective" optical behavior of the Faraday medium containing magnetic nanoparticles.     

New preparation method of gold nanoparticles on SiO2

It is shown that adsorption of the [Au(en)(2)](3+) cationic complex can be successfully employed for the deposition of gold nanoparticles (1.5 to 3 nm) onto SiO(2) with high metal loading, good dispersion, and small Au particle size. When the solution pH increases (from 3.8 to 10.5), the Au loading in the Au/SiO(2) samples increases proportionally (from 0.2 to 5.5 wt %), and the average gold particle size also increases (from 1.5 to 2.4 nm). These effects are explained by the increase in the amount of negatively charged sites present on the SiO(2) surface, namely, when the solution pH increases, a higher number of [Au(en)(2)](3+) species can be adsorbed. Extending the adsorption time from 2 to 16 h gives rise to an increase in the gold loading from 3.3 to 4.0 wt % and in the average particle size from 1.8 to 2.9 nm. Different morphologies of gold nanoparticles are present as a function of the particle size. Particles with a size of 3-5 nm show defective structure, some of them having a multiple twinning particle (MTP) structure. At the same time, nanoparticles with an average size of ca. 2 nm exhibit defect-free structure with well-distinguishable {111} family planes. TEM and HAADF observations revealed that Au particles do not agglomerate on the SiO(2) support: gold is present on the surface of SiO(2) only as small particles. Density functional theory calculations were employed to study the mechanisms of [Au(en)(2)](3+) adsorption, where neutral and negatively charged silica surfaces were simulated by neutral cluster Si(4)O(10)H(4) and negatively charged cluster Si(4)O(10)H(3), respectively. The calculation results are totally consistent with the suggestion that the deposition of gold takes place according to a cationic adsorption mechanism.     

Chemiluminescence accompanied by the reaction of gold nanoparticles with potassium permanganate

It was found that potassium permanganate (KMnO(4)) could react with gold nanoparticles in a strong acid medium to generate particle size-dependent chemiluminescence (CL). For gold nanoparticles with the size of 2.6 or 6.0 nm, the reaction was fast and could produce the excited state Mn(II) with light emission around 640 nm. For gold nanoparticles larger than 6.0 nm, no light emission was observed due to a much slower reaction rate. The CL intensity was found to increase linearly with the concentration of 2.6 nm gold nanoparticles. The effects of the acid medium, concentration of KMnO(4) and presence of N(2) and O(2) were investigated. UV-Vis absorption spectra and X-ray photoelectron spectra (XPS) measured before and after the CL reaction were analyzed. A CL mechanism has been proposed suggesting that the potassium permanganate was reduced by gold nanoparticles in the strong acid medium to the excited state Mn(II), yielding light emission. The results bestow new light on the size-dependent chemical reactivities of the gold nanoparticles and on nanoparticle-induced chemiluminescence. The CL reaction was considered to be of potential use for bioanalysis applications.     

在TiO2上CO的光催化氧化

最近在“氧化的”TiO₂(即表面无氧空位和Ti³⁺)上进行的CO光催化氧化研究发现:室温下,以黑光灯(峰值λ=365nm)光照时,“氧化的”TiO₂无CO催化氧化的活性,但以杀菌灯(峰值λ=253.7nm)光照时,则对CO产生显著的催化活性.参照CO在过渡金属表面的催化氧化机理,对本现象进行了解释:黑光灯照时,O₂在TiO₂表面只生成O_2(a)^-,而O_2(a)^-不能使CO氧化,只有以杀菌灯照时,TiO₂表面产生O_(a)^-,CO氧化反应才能发生.     

Preparation and catalytic behaviour of sub-nanometer gold deposited on TiO2 by vacuum calcination

Titania-supported gold catalysts calcined under vacuum have been studied using a combination of TEM and activity measurements for CO oxidation. A time dependent study by TEM suggested the presence of highly dispersed gold, a high percentage of which lies below the 1 nm resolution limit. A comparison between Au/TiO₂ samples calcined in vacuum and air has shown large differences in catalytic behaviour, indicating that not only the size of gold particles but also the oxidized state of the support surface is important.     

Restructuring-induced activity of SiO(2)-supported large au nanoparticles in low-temperature CO oxidation

Large Au nanoparticles with an average size of approximately 10 nm supported on inert SiO(2) become active in low-temperature CO oxidation after the addition of NaNO(3). The catalyst structures have been characterized in detail by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and X-ray absorption spectroscopy. The NaNO(3) additive in Au/SiO(2) catalysts does not lead to the formation of fine Au nanoparticles, which are generally considered to be inevitable in low-temperature CO oxidation catalyzed by gold, nor does it alter the electronic structure of Au. The NaNO(3)-induced restructuring of large Au nanoparticles was proposed to create low-coordinated Au sites on the surface capable of catalyzing low-temperature CO oxidation. These results experimentally prove that the activity of supported Au nanoparticles in low-temperature CO oxidation could solely arise from their geometric structure, which greatly deepens the fundamental understandings of Au nanocatalysis.     

Transmission electron microscopy characterization of colloidal copper nanoparticles and their chemical reactivity

A colloidal synthesis method was developed to produce face centered cubic (fcc) Cu nanoparticles in the presence of surfactants in an organic solvent under an Ar environment. Various synthetic conditions were explored to control the size of the as-prepared nanoparticles by changing the precursor, varying the amount of surfactants, and tuning the reaction temperature. Transmission electron microscopy (TEM), selected-area electron diffraction, and high-resolution TEM were used as the main characterization tools. Upon exposure to air, these nanoparticles are oxidized at different levels depending on their sizes: (1) an inhomogeneous layer of fcc Cu₂O forms at the surface of Cu nanoparticles (about 30 nm); (2) Cu nanoparticles (about 5 nm) are immediately oxidized into fcc Cu₂O nanoparticles (about 6 nm). The occurrence of these different levels of oxidization demonstrates the reactive nature of Cu nanoparticles and the effect of size on their reactivity. Furthermore, utilization of their chemical reactivity and conversion of spherical Cu nanoparticles into CuS nanoplates through the nanoscale Kirkendall effect were demonstrated. The oxidization and sulfidation of Cu nanoparticles were compared. Different diffusion and growth behaviors were involved in these two chemical transformations, resulting in the formation of isotropic Cu₂O nanoparticles during oxidization and anisotropic CuS nanoplates during sulfidation.