痕量Pb2 在nano-TiO2膜电极上的电化学行为及应用研究

利用纳米二氧化钛(nano-TiO2)的结构特性制备了一种nano-TiO2膜修饰的玻碳电极.采用阳极溶出伏安法详细研究了Pb2 在nano-TiO2膜修饰玻碳电极上的电化学响应行为,并对各种实验参数进行了优化.实验结果表明,在0.10 mol/L HAc-NaAc缓冲体系(pH 4.0)中,于-1.2 V富集搅拌480 s,再静置60 s后阳极化扫描,Pb2 在-0.48 V左右出现一灵敏的阳极溶出峰.Pb2 的溶出峰电流与其浓度在2.0×10-9 ～1.0×10-7 mol/L范围内呈良好的线性关系,检出限可达1.0×10-10 mol/L.该修饰电极具有一定的抗干扰能力,将其应用于实际水样中Pb2 的检测,结果令人满意.     

NO2-在CTMAB-碳纳米管修饰电极上的电化学行为及测定

制备了十六烷基三甲基溴化铵-多壁碳纳米管修饰电极.用循环伏安法和示差脉冲伏安法研究了NO2 -在该修饰上的电化学行为,该修饰电极对NO2 -的氧化具有良好的电催化能力,NO2 -的氧化峰电流与其浓度在1.67×10-7 ～2.2×10 -5mol/L范围内呈现良好的线性关系,检测限为5.6×10-8mol/L(S/N=...     

三聚氰胺基螯合树脂/碳纳米管修饰充蜡石墨电极阳极溶出伏安法测定铅和镉

采用超声法合成了三聚氰胺-甲醛-硫脲螯合树脂(MFT),基于碳纳米管优良的光电性能,制备了MFT/纳米碳管复合物修饰充蜡石墨电极(MFT/MWCNTs/WGE)。采用场发射扫描电子显微镜及电化学技术表征了该修饰电极的特性。该电极被成功地用于水溶液中重金属离子Pb(Ⅱ)和Cd(Ⅱ)的同时测定,Pb(Ⅱ)和Cd(Ⅱ)的溶出峰电流与浓度分别在3×10-8~9×10-7mol/L和5×10-8~7×10-7mol/L的浓度范围内,呈良好的线性增长关系,Pd(Ⅱ)和Cd(Ⅱ)的检测限分别为2×10-9和3×10-9mol/L(3σ)。     

抗坏血酸在纳米银DNA修饰电极上的电化学行为研究

利用电化学生长法制备了纳米银DNA修饰电极.在pH 4.1的磷酸盐(PBS)缓冲溶液中研究了抗坏血酸(AA)在该电极上的电化学行为,实验得到电荷传递系数α=0.41、扩散系数D=1.22×10-5 cm2 /s.建立了利用修饰电极催化作用快速测定抗坏血酸的方法,修饰电极对抗坏血酸的催化氧化峰与抗坏血酸的浓度分别在1.0×10-2～5.0×10-5 mol/L、5.0×10-6～5.0×10-8 mol/L范围内呈线性关系,检出限为1.0×10-9 mol/L.该方法快速、灵敏.     

聚吡咯／多壁碳纳米管修饰电极对多巴胺的测定

制备了聚吡咯/多壁碳纳米管(PPy/MWNT)复合膜修饰电极。研究了神经递质多巴胺(DA)在该修饰电极上的电化学行为。实验表明,PPy/MWNT复合膜修饰电极对DA的电催化作用优于PPy修饰电极。在pH=4.10的0.2mol/L醋酸-醋酸钠缓冲溶液中,DA在该修饰电极上的CV曲线于0.31V和0.28V处出现一对灵敏的氧化还原峰,峰电位差△Ep比裸玻碳电极降低58mV,比PPy修饰电极降低28mV,峰电流显著增加。氧化峰电流ipa与DA浓度在1.0×10-4~7.8×10-8mol/L范围内呈良好的线性关系,线性回归方程为ip(μA)=0.2512 1.2300C(×10-5mol/L),相关系数r=0.9992,检出限为3.9×10-8mol/L。常见物质对DA的检测无干扰,DA注射液样品检测回收率为94%~104%。     

NO2-在CTMAB-氧化钕纳米修饰电极上的电化学行为及其测定

制备了十六烷基三甲基溴化铵-氧化钕纳米修饰电极。用循环伏安法和示差脉冲伏安法研究了NO2-在该修饰电极上的电化学行为,结果表明,该修饰电极对NO2-的氧化具有良好的电催化能力,NO2-的氧化峰电流与其浓度在3.33×10-8～1.04×10-6mol/L范围内呈现良好的线性关系,检测限为9.86×10-9mol/L(S/N=3)。此外,该修饰电极具有良好的重现性和稳定性。本方法可用于NO2-实际样品的测定。     

一种基于乙炔黑/壳聚糖膜修饰电极的对氨基酚传感研究

制备了一种乙炔黑/壳聚糖薄膜修饰的玻碳电极,用循环伏安法详细研究了对氨基酚在该修饰电极上的电化学行为.结果表明: 对氨基酚在此膜修饰电极上呈现出一对可逆的氧化还原峰.相对于裸玻碳电极,该氧化还原峰的峰电流明显提高,峰电位差减小,可逆性变好,表明乙炔黑/壳聚糖薄膜电极对对氨基酚的电化学氧化具有良好的催化作用.对氨基酚的氧化峰电流与其浓度在1.0×10-7～2.0×10-6 mol/L和2 0×10-6～5.0×10-4 mol/L范围内均呈良好的线性关系; 检出限为5.0×10-8 mol/L(S/N=3).应用此修饰电极测定实际水样,结果较满意.     

介孔炭/纳米金修饰玻碳电极的制备及其应用研究

制备了介孔炭/纳米金修饰玻碳电极,并对对苯二酚(HQ)在该修饰电极上的电化学行为进行了研究。与HQ在纯介孔炭材料修饰玻碳电极上的电化学响应相比,HQ在该修饰电极上的氧化峰和还原峰电流均大大增加,表明纳米金与介孔炭复合后对HQ具有良好的催化作用。HQ在该修饰电极上经过富集后,峰电流明显增大。采用循环伏安法对HQ电化学行为进行研究,结果表明,HQ在3.0×10-8~1.0×10-6mol/L和1.0×10-6~1.0×10-4mol/L浓度范围内与峰电流呈良好的线性关系,据此建立了检测HQ的电化学分析方法。该方法的相对标准偏差为0.69%,检出限(S/N=3)为1.0×10-8mol/L,具有较高的稳定性和灵敏度。     

聚刚果红修饰电极直接测定槐米中芦丁

采用电化学聚合法制备了聚刚果红膜修饰电极,应用循环伏安法研究芦丁在该修饰电极上的电化学行为。实验表明,聚刚果红修饰电极对芦丁具有良好的电催化作用,在5.0×10-8～8.0×10-6 mol/L浓度范围内,芦丁的差示脉冲伏安峰电流与其浓度呈良好的线性关系,检测限为2.0×10-8 mol/L。该法可用于槐米中芦丁的直接测定。     

纳米银粒子修饰电极法测定血红蛋白

报道了一种利用纳米材料修饰电极检测血红蛋白的新方法。制作了以纳米银粒子修饰的银电极,并研究了血红蛋白在该修饰电极上的直接电化学行为。实验结果表明,血红蛋白在该修饰电极上具有良好的电流响应。在2.0×10-7~1.0×10-5mol/L浓度范围内,血红蛋白的氧化峰电流与其浓度呈良好线性关系;检出限为7.4×10-8mol/L。研究了该修饰电极对血红蛋白的催化机理,利用该电极所建立的方法实现了对血红蛋白的分析测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.