[1,3]Dioxolo[5,6][1]benzothieno[2,3-c]-quinolin-6(5H)-ones

Summary The reaction of 3,4-methylenedioxycinnamic acid (1) with thionyl chloride resulted in the formation of 7-chlorothieno[2,3-f]-1,3-benzodioxole-6-carbonyl chloride (2) and cinnamoyl chloride (3). Subsequent reaction of the former withp-substituted anilines led to the formation of 7-chloro-N-(p-substituted phenyl)-thieno[2,3-f]-1,3-benzodioxole-6-carboxamides (4a–c) which on photocyclization afforded 2-substituted [1,3]dioxolo[5,6][1]benzothieno[2,3-c]quinolin-6(5H)-ones (5a–c) in fairly good yields and high purity. The structures have been confirmed by IR,¹H NMR, and analytical methods.Accepted for presentation at the Hong Kong International Symposium on Heterocyclic Chemistry (August 13–16, 1995)     

N-(取代对三氟甲基苯基)-N'-(1,3,5-三取代)吡唑-4-羰基硫脲的合成与生物活性

为了寻找高效低毒的农药, 从3-甲基-1-取代苯基-5-吡唑酮出发, 经过几步反应得到5-氯-3-甲基-1-取代苯基-4-吡唑羰基异硫氰酸酯. 5-氯-3-甲基-1-取代苯基-4-吡唑羰基异硫氰酸酯分别与对三氟甲基苯胺和2,6-二氯-4-三氟甲基苯胺反应得到10个未见文献报道的N-(取代对三氟甲基苯基)-N'-(1,3,5-三取代)吡唑-4-羰基硫脲类化合物, 其结构经元素分析, IR, ¹H NMR确证. 初步生物活性测试结果表明部分化合物有一定的杀菌活性.     

4-(对取代苯基)-2-[2-(取代苯基)呋喃-4-甲酰胺]-1',3',4'-均三唑[1,2-d]-1,3,4-噻二唑类衍生物的合成和生物活性

以1-氨基-5-巯基-2-(对取代苯基)-1,3,4-均三唑和5-取代苯基-2-呋喃甲酰异硫氰酸酯为原料, 合成了10个未见文献报道的含苯环连呋喃的均三唑并噻二唑类衍生物, 通过元素分析, ¹H NMR, IR和MS确定化合物的结构, 初步生物活性测试表明标题化合物具有一定的除草活性.     

水溶性稠杂环均三唑并噻二唑体系的合成及生物活性(I): 哌嗪取代衍生物

4-氨基-5-吡啶-4-基-均三唑硫醇(1)在复合催化剂DMAP和TBAB作用下与对卤代苯甲酸经环缩合反应以高收率得到中间体6-(5-氯-3-甲基-1-取代苯基-1H-吡唑-4-基)-3-吡啶-3-基-均三唑并[3,4-b][1,3,4]噻二唑(2a～2c), 接着苯环卤原子与取代哌嗪在聚乙二醇催化作用下发生亲核取代反应得到相应的哌嗪游离碱(3a～3c). 其中, 单取代哌嗪游离碱3a与含功能基的卤代物缩合得到功能基取代的哌嗪衍生物(4a～4g). 这些产生的游离碱与盐酸反应得到相应的水溶性盐酸盐. 所合成新化合物的结构经元素分析和光谱数据表征, 并评价了它们的体外抗菌活性及构效关系.     

New azobenzene-based natural fatty acid liquid crystals with low melting point: synthesis,DFT calculations and binary mixtures

ABSTRACT

Three new groups of azobenzene liquid crystals named,4-[2-(4-substituted phenyl)diazenyl]phenyl hexdecanoate, 4-[2-(4-substituted phenyl)diazenyl]phenyl octadeca-9-enoate, and 4-[2-(4-substituted phenyl)diazenyl]phenyl octadeca-9,12-dienoate were prepared from naturally occurring fatty acids (palmitic, oleic and linoleic acids). All groups were investigated for their mesophase formation and thermal stability of pure compounds and their binary mixtures by differential scanning calorimetry (DSC), polarised light microscopy (PLM) and thermogravemetric analyses (TGA). Each group contains two compounds that differ from each other by the polar substituent X (CH₃O and Cl) with different number (n) of carbons in the fatty alkyl chains. Molecular structures of the prepared compounds were confirmed via FT-IR, ¹H NMR, C¹³ NMR and elemental analysis. Mesomorphic and thermal properties were investigated. Smectic A phase is the mesophase observed in all of the compounds prepared and their binary mixtures with low melting temperatures. Moreover, DFT calculations were discussed for the prepared compounds. The results revealed that the alkyl chain of the carboxylate part does not significantly affect on the energy difference of the FMOs as well as the thermodynamic parameters. However, the high electronegative Cl substituent has significant effect on the energy difference of the FMOs and decreases the dipole moments of the prepared compounds.     

Green synthesis of 1H-pyrazolo[1,2-b]phthalazine-2-carbonitrile derivatives using a new bifunctional base–ionic liquid hybrid magnetic nanocatalyst

The ionic liquid-base N,N,2,2,6,6-hexamethyl-N-(3-(trimethoxysilyl)propyl)piperidin-4-amonium iodide was grafted onto titana-coated NiFe₂O₄ nanoparticles for obtaining an efficient and reusable ionic liquid-base hybrid nanocatalyst. The structure of hybrid nanoparticles was characterized using FT-IR (Fourier-transform infrared spectroscopy), field emission scanning electron microscopy, EDS (energy-dispersive X-ray spectroscopy), EDS map scan, Brunauer–Emmett–Teller surface area analysis, CHN (elemental analysis), vibrating sample magnetometer and thermogravimetric analysis techniques. Furthermore, this novel hybrid catalyst was used in one-pot three-component synthesis of 3-amino-1-aryl-5,10-dioxo-1H-pyrazolo[1,2-b]phthalazine-2-carbonitrile derivatives under green and environmentally benign conditions. This protocol avoids the use of harmful catalysts, toxic solvents and harsh reaction conditions. The products were synthesized in excellent yields within short reaction time and identified using elemental analysis, FT-IR, ¹H NMR and ¹³C NMR spectroscopies.     

Synthesis of 5′-C- and 2′-O-(Bromoalkyl)-Substituted Ribonucleoside Phosphoramidites for the Post-synthetic Functionalization of Oligonucleotides on Solid Support

The preparation of building blocks for the incorporation of 6′-O-(5-bromopentyl)-substituted β-D -allofuranosylnucleosides and 2′-O-[(3-bromopropoxy)methyl]-substituted ribonucleosides into oligonucleotide sequences is presented (Schemes 1 and 2). These reactive building blocks can be modified with a variety of soft nucleophiles while the (fully protected) sequence is still attached to the solid support. As an example of this strategy, we carried out some preliminary solid-phase substitution and conjugation reactions with DNA sequences containing a 2′-O-[(3-bromopropoxy)methyl]-substituted ribonucleoside (Scheme 3) and determined the pairing properties of duplexes obtained therefrom.     

Nucleotides,Part LXIII,New 2-(4-Nitrophenyl)ethyl(Npe)- and 2-(4-Nitrophenyl)ethoxycarbonyl(Npeoc)-Protected 2′-Deoxyribonucleosides and Their 3′-Phosphoramidites – Versatile Building Blocks for Oligonucleotide Synthesis

A series of new base-protected and 5′-O-(4-monomethoxytrityl)- or 5′-O-(4,4′-dimethoxytrityl)-substituted 3′-(2-cyanoethyl diisopropylphosphoramidites) and 3′-[2-(4-nitrophenyl)ethyl diisopropylphosphoramidites] 52 – 66 and 67 – 82 , respectively, are prepared as potential building blocks for oligonucleotide synthesis (see Scheme). Thus, 3′,5′-di-O-acyl- and N ²,3′-O,5′-O-triacyl-2′-deoxyguanosines can easily be converted into the corresponding O⁶-alkyl derivatives 6 , 8 , 10 , 12 , 14 , and 16 by a Mitsunobu reaction using the appropriate alcohol. Mild hydrolysis removes the acyl groups from the sugar moiety (→ 9 , 11 , 13 , 15 , and 19 (via 18 ), resp.) which can then be tritylated (→ 38 – 42 ) and phosphitylated (→ 57 – 61 ) in the usual manner. N ²-[2-(4-nitrophenyl)ethoxycarbonyl]-substituted and N ²-[2-(4-nitrophenyl)ethoxycarbonyl]-O⁶-[2-(4-nitrophenyl)ethyl]-substituted 2′-deoxyguanosines 5 and 7 , respectively, are synthesized as new starting materials for tritylation (→ 28 , 35 , and 37 ) and phosphitylation (→ 54 , 56 , 70 , and 78 ). Various O⁴-alkylthymidines (see 20 – 24 ) are also converted to their 5′-O-dimethoxytrityl derivatives (see 43 – 47) and the corresponding phosphoramidites (see 62 – 66 and 79 – 82 ).     

Syntheses of N-alkyl, N,N-dialkyl, and N-(4-substituted phenyl) O-ethyl thioncarbamates: a kinetic study

Abstract  

The kinetics of the syntheses of N-alkyl, N,N-dialkyl, and N-(4-substituted phenyl) O-ethyl thioncarbamates from sodium ethyl xanthogenacetate, ten alkylamines, and eight substituted anilines were studied at 25, 30, 35, and 40 °C. The reactions were found to follow second-order kinetics. The kinetic (Arrhenius) parameters, such as the activation energy and the frequency factor, as well as the Eyring parameters, such as the standard entropy, the standard Gibbs energy, and the standard enthalpy of activation, were calculated from the second-order rate constants. The mechanism of the reaction was postulated based on the kinetic studies presented and the optimization of the reaction mechanism using the MOPAC PM6 semi-empirical method.     

Mesophase stability of new Schiff base ester liquid crystals with different polar substituents

Four new groups of Schiff base ester liquid crystal compounds, 4-((4?-substituted phenylimino) methyl)phenyl–4″-alkoxybenzoates, In_a–d, were prepared and investigated for their mesophase formation and stability. Each group constitutes four homologous series that differ from each other by the polar substituent X (CH₃O, CH₃, H, and Cl). Within each homologous series, the number (n) of carbons in the alkoxy chain varies between 6, 8, 10, and 12. Molecular structures of the prepared compounds were confirmed via FT-IR, ¹H NMR, mass spectroscopy, and elemental analysis. The mesomorphic properties were investigated by differential scanning calorimetry and polarised light microscopy. Comparative studies between the present series and previously investigated 4-(4-substituted phenylazo)phenyl 4″-alkoxybenzoates revealed that the phenylimino mesogenic core increases the mesophase stability rather than the azo analogues.     

Effect of including extra phenylazo moiety on the mesophase behaviour of three-ring azo/ester molecules

Five homologous series of the four-ring 4-substituted phenylazo phenyl 4?-(4?-alkoxy phenylazo) benzoates (In_a–e) were prepared and their mesophase behaviour investigated by differential scanning calorimetry (DSC) and phases identified by polarised light microscopy (PLM). Compounds prepared were structurally characterised via infrared, ¹H-NMR, mass spectroscopy, thermogravimetric and elemental analysis. Transition temperatures were first correlated with the alkoxy-chain length (n, that varies between 6, 8, 10, 14, and 16 carbons) within each homologous series, and again with the polarisability anisotropy (Δα_X) of the Ar-X bond, where X changes between CH₃O, CH₃, H, Br, and CN groups . Comparative studies were made to investigate the effect of introducing the extra phenyl azo moiety into the previously investigated three-ring compounds, 4-substituted phenyl 4′-(4″-alkoxyphenylazo) benzoates (IIn_a–e), 4-substituted phenylazo 4′-(4″- alkoxy phenyl) benzoates (IIIn_a–e), and 4-(4′-alkoxy phenylazo) phenyl 4″-substituted benzoates (IVn_a–e), each bear the same polar group, X, and the alkoxy group, n .     

Synthesis and characterization of new soluble fluorinated seco-porphyrazines

Magnesium porphyrazinate substituted with eight 3,5-bis(trifluoromethyl)phenyl groups on the peripheral positions has been synthesized by the cyclotetramerization of 3,4-[3,5-bis(trifluoromethyl)phenyl]pyrroline-2,5-diimine in the presence of magnesium butanolate. Acid-mediated demetallation of the magnesium porphyrazine resulted in peripheral oxidation of one pyrrole ring to reveal the seco-porphyrazine, octakis[3,5-bis(trifluoromethyl)phenyl]-2-seco-porphyrazine-2,3-dione. Further reaction of this product with copper (II) acetate, zinc (II) acetate and cobalt (II) acetate has led to the metallo-derivatives, {octakis[3,5-bis(trifluoromethyl)phenyl]-2-seco-2,3-dioxoporphyrazinato} M(II) [M = Cu(II), Zn(II), Co(II)]. These new soluble complexes were characterized by elemental analysis, together with FT-IR, ¹H NMR, ¹³C NMR, ¹⁹F NMR, UV-Vis and mass spectral data.     

A facile and expeditious approach for the synthesis of 2-azetidinone derivatives via a multicomponent reaction

Abstract  

New organic reactions allow chemical transformations which were previously unknown. Therefore, new reactions are important contributions to progress in the field of organic synthesis. Herein, we are reporting a simple, one-pot, efficient three-component synthesis of novel 3-chloro-4-[4-(2-oxo-2H-chromen-4-ylmethoxy)phenyl]-1-phenylazetidin-2-one derivatives using 4-(2-oxo-2H-chromen-4-ylmethoxy)benzaldehydes, anilines, and chloroacetyl chloride in the presence of triethyl amine as a catalyst under different conditions. Taking into account environmental and economic considerations, the protocol presented here has the merits of simple operation, convenient work-up, being environmentally benign, and providing good yields. The synthesized compounds were characterized by IR, ¹H NMR, ¹³C NMR, MS, and elemental analysis.     

不饱和半夹芯式16e化合物Cp*Ir(S2C2B10H10)与邻、间位取代苯基叠氮的反应性

考虑取代基的位置和电子效应对反应体系的影响, 本文系统地研究了16e化合物Cp^*Ir(S₂C₂B₁₀H₁₀) (1)与邻、间位取代苯基叠氮的反应。研究结果表明:与邻、间位取代苯基叠氮反应均生成苯环邻位碳发生C-H 活化形成C-S 键的金属配合物。这些配合物通过核磁(¹H、¹¹B、¹³C)、红外、质谱、元素分析和单晶结构解析进行了全面地表征。在光照反应结果的基础上, 提出了形成这类产物的自由基机理。     

Lewisx五糖的有效合成: 发展DC-靶向疫苗的有效分子

将选择性保护的乳糖二醇与Lewis^x三糖在N-碘代丁二酰亚胺(NIS)/TfOH催化下高立体、高区域选择性糖苷化得Lewis^x五糖, 后者脱保护后获得目标五糖, 总收率67.7%. 化合物结构经NMR, MS和元素分析确证.     

Synthesis of benzo-halogenated 4-hydroxy-2(1H)-quinolones

Malondianilides 3 derived from dichloro substituted anilines 2 undergo cyclization to afford 4-hydroxy-2(1H)-quinolones 4 in very good yields using methane sulfonic acid-phosphorus pentoxide as catalyst. 3,4-Dichloro anilines 5 can be shown to yield two isomers, 7 and 8 , whereas 3-substituted anilines 9 afford merely 7-substituted 4-hydroxy-2(1H)-quinolones 11.     

An asymmetric synthesis of l-[3-C]phenylalanine and l-[3-C]tyrosine from [C]carbon monoxide

-[3-¹³C]Phenylalanine and -[3-¹³C]tyrosine were synthesized. [α-¹³C]Benzyl bromides were prepared from [¹³C]carbon monoxide via the palladium-catalyzed carboalkoxylation of aryl halides. The asymmetric carbon corresponding to the 2-position in phenylalanine was introduced by the diastereoselective alkylation of Dellaria's oxazinone with [α-¹³C]benzyl bromides. Finally, ethanolysis, deprotection, hydrogenolysis and acid hydrolysis of the resulting alkylated oxazinones gave -[3-¹³C]phenylalanine and -[3-¹³C]tyrosine in high optical purity.     

Y2O3/纳米碳管复合粒子的结构及其对高氯酸铵热分解性能的研究

采用溶胶-凝胶法制备了Y₂O₃/纳米碳管复合粒子, 并用SEM, XPS, FT-IR和XRD对Y₂O₃/纳米碳管复合粒子的形貌和微观结构进行了表征. 结果表明, 纳米碳管有效承载了Y₂O₃, Y₂O₃连续均匀地负载在纳米碳管的表面, 负载量为19.53%. FT-IR 和XPS证明了Y₂O₃粒子和纳米碳管表面之间发生了化学键合. 用三种方法将相同比例的Y₂O₃/纳米碳管复合粒子与高氯酸胺(AP)进行混合, 采用差热分析(DTA)研究了三种混合样品中Y₂O₃/纳米碳管复合粒子对高氯酸铵热分解的催化性能. 结果表明, 三种混合样品中的Y₂O₃/纳米碳管复合粒子都能催化高氯酸铵的热分解, 其中通过水溶剂混合的样品中Y₂O₃/纳米碳管复合粒子的催化效果优于另外两种. 与纯高氯酸铵相比, 其样品中高氯酸铵的高温分解峰温降低了168.5 ℃, 表观分解热由371 J•g^－1提高到1410 J•g^－1. 并用不同样品中高氯酸铵热分解动力学参数对所得结果进行了理论分析.     

Carbon dioxide reforming of methane over Ni/Mo/SBA-15-La2O3 catalyst: Its characterization and catalytic performance

The Ni/Mo/SBA-15 catalyst was modified by La2O3 in order to improve its thermal stability and carbon deposition resistance during the CO2 reforming of methane to syngas. The catalytic performance, thermal stability, structure, dispersion of nickel and carbon deposition of the modified and unmodified catalysts were comparatively investigated by many characterization techniques such as N2 adsorption, H2-TPR, CO2-TPD, XRD, FT-IR and SEM. It was found that the major role of La2O3 additive was to improve the pore structure and inhibit carbon deposition on the catalyst surface. The La2O3 modified Ni/Mo/SBA-15 catalyst possessed a mesoporous structure and high surface area. The high surface area of the La2O3 modified catalysts resulted in strong interaction between Ni and Mo-La, which improved the dispersion of Ni, and retarded the sintering of Ni during the CO2 reforming process. The reaction evaluation results also showed that the La2O3 modified Ni/Mo/SBA-15 catalysts exhibited high stability.