Design, synthesis, and bioactivity of cyanonitrovinyl neonicotinoids as potential insecticides

Abstract  

A series of cyanonitrovinyl neonicotinoids were designed and synthesized via five steps in about 35% overall yields. All compounds were structurally characterized by ¹H nuclear magnetic resonance (NMR), ¹³C NMR, infrared (IR), and high-resolution mass spectrometry (HRMS), and single-crystal X-ray diffraction analysis of 2-[1-[(6-chloropyridin-3-yl)methyl]-2-imidazolidinylidene]-2-nitroacetonitrile revealed that the double bond is (E)-configured. The preliminary agriculture bioassay indicated that one compound exhibited moderate insecticidal activity against pea aphid.     

Thiol-functionalized anthraquinones: mass spectrometry and electrochemical studies

Abstract  

In this work, the synthesis of various thiol-functionalized anthraquinone compounds is presented. The studied compounds were characterized by mass spectrometry and the main fragmentation pathways are discussed. The compounds studied formed stable self-assembled monolayers (SAMs) in the gold surface. The parameters for the reduction processes in the gold surface of the studied new anthraquinones were determined by cyclic voltamperometry tests.     

Preparation and characterization of molecularly imprinted microspheres for selective extraction of trace melamine from milk samples

We describe molecularly imprinted microspheres (MIMs) for the selective extraction of melamine from milk. The MIMs were made from melamine as the template molecule, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the linking agent. The MIMs were synthesized by suspension polymerization and characterized by rebinding experiments. They displayed high adsorption capacity, fast rebinding kinetics, and highly specific rebinding of melamine. The imprinting factor is 4.1. Scatchard analysis revealed a one-type rebinding behavior, the dissociation constant and maximum rebinding capacity being 37.59 g L^?1 and 30.85 μmol g^?1, respectively. The MIMs exhibited a 25% cross-reactivity towards atrazine, but less than 3.0% towards prometryn, clenbuterol and metronidazole. In addition, a MIM-based solid phase extraction (MISPE) column for melamine was prepared by packing MIMs into a common SPE cartridge. The MISPE extraction gave recoveries of 89.8 to 100.6% of melamine, with relative standard deviations of 5.9 to 7.5%. There was no significant loss of rebinding capacity after more than 60 repeated uses, thus demonstrating the high stability of the MISPE column. The MSPE column also was applied to the extraction of melamine from spiked liquid and powdered milk with satisfying accuracy and precision.

Synthesis, UV–Vis spectra, and Hammett correlation of some novel bis(dihydropyrrolo[3,4-c]pyrazoles)

Abstract  

Twenty-nine novel bis(dihydropyrrolo[3,4-c]pyrazole) derivatives were obtained by reacting C,N-phenyl-substituted nitrilimines generated in situ from corresponding hydrazonyl chlorides with bismaleimides. The structures were elucidated by physical and spectroscopic methods [m.p., R _f, infrared (IR), ¹H nuclear magnetic resonance (NMR), ¹³C NMR, correlation spectroscopy (COSY), heteronuclear correlation (HETCOR), nuclear Overhauser effect (NOE), and high-resolution mass spectrometry (HRMS)]. Also, Hammett correlation graphs were obtained between Hammett constants σ _p and λ _max values of bis(pyrrolopyrazoles) carrying p-substituted phenyl-ring-bearing electron-withdrawing and electron-donating groups and discussed in terms of substituent effects.     

Synthesis, characterization, and cyclometalation studies of benzo[1,2-h: 5,4-h′]diquinolines with palladium and platinum

Benzo[1,2-h: 5,4-h′]diquinoline(1a) represents a new family of tridentate NCN pincer ligand. We report the synthesis of the parent ligand (1a) and its derivatives (1b R = Me, 1c R = t-Butyl, 1d R = Phenyl). The ligands were characterized by ¹H and ¹³C NMR, as well as mass spectral analysis, and X-ray structural determination. They readily undergo cyclometalation with LiPdCl₄, Pd(OAc)₂, and K₂PtCl₄ to form the cyclometalated Pd(NCN)Cl (2a-c, 3a), and Pt(NCN)Cl (4a) pincer complexes. These complexes have been characterized through NMR, and mass spectrometry. PdNCNCl (2a) structure was determined by single crystal X-ray diffraction. Complex 2a has shown to catalyze the Heck coupling reaction between bromobenzene and n-butylacyrlate in NMP at 140 °C, TON of 2506 were observed.     

Melamine,silica, and ionic liquid as a novel flame retardant for rigid polyurethane foams with enhanced flame retardancy and mechanical properties

Rigid polyurethane (PU) foams were successfully filled with different weight ratios of melamine (1 wt%, 5 wt%, 10 wt%), silica (0.1 wt%) and ionic liquid, 1-Ethyl-3-methylimidazolium chloride, [EMIM]Cl (0.3 wt%). The aim of this study was to improve the flame retardancy of PU foams and to develop the synergistic effect between melamine, silica and ionic liquid on the flame-retardant PU foams. The influence of different loadings of the fillers was examined. The results showed that in comparison with unfilled foam, all modified compositions are characterized by higher density (41–46 kg m⁻³), greater compression strength (134–148 kPa), and comparable thermal conductivity (0.023–0.026 W m⁻¹ K⁻¹). Moreover, the reaction to fire of the PU composites has been investigated by the cone calorimeter test. The results showed that the fire resistance of PU foams containing as little as 1 wt% of melamine is significantly improved. For example, the results from the cone calorimeter test showed that the incorporation of the melamine, silica and ionic liquid significantly reduced the peak of heat release rate (pHRR) by ca. 84% compared with that of unmodified PU foam. SEM results showed that incorporated fillers can form an intumescent char layer during combustion which improves the reaction to fire of the composite foams.     

Study of electrochemical oxidation of cyanidin glycosides by online combination of electrochemistry with electrospray ionization tandem mass spectrometry

Abstract  

Electrochemistry coupled with mass spectrometry (EC–MS) is a promising analytical tool for the online study of oxidation processes of anthocyanins. Two cyanidin glycosides, cyanidin-3-galactoside (ideain) and cyanidin-3,5-diglucoside (cyanin), were subjected to electrochemical oxidation and subsequent online mass spectrometric identification of the formed products. Application of relatively low working potentials (around 100 mV vs. Pd/H₂) using a porous graphite coulometric electrode yielded detectable oxidation products. As determined by hydrodynamic voltammetry, the monoglycosylated analogue undergoes anodic oxidation easier than the diglycosylated one. As a first step of the electrochemically induced oxidation, incorporation of a hydroxyl group was observed for both glycosides. Besides, an oxidative condensation of two anthocyanin molecules was observed. The proposed oxidative condensation was further confirmed by consecutive fragmentation (i.e., collection of MS², MS³, and MS⁴ spectra) in which corresponding subsequent losses of the sugar moiety were observed.     

Phosphinoyl and Thiophosphinoylcarbodithioates: Synthesis,Molecular Structure,and Application as New Efficient Mediators for RAFT Polymerization

New phosphinoyl and thiophosphinoylcarbodithioates were synthesized in a one‐pot reaction from the corresponding phosphinochalcogenides. Compounds of this new generation of thiocarbonylthio derivatives have been fully characterized by IR as well as ¹H, ³¹P, and ¹³C NMR spectroscopy and by mass spectrometry. Their solid‐state structures reveal that they are isostructural but crystallize in different space groups. These new compounds are highly efficient reversible chain‐transfer agents for the reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene (St) and n‐butyl acrylate (nBA), with controlled number‐average molecular weights (M_n) and narrow dispersity values (Ð<1.3). The controlled character of the polymerization was further exemplified by MALDI‐TOF mass spectrometry and the synthesis of PSt‐P(nBA) diblock copolymers.     

Analysis of ketone‐based neurosteroids by reactive low‐temperature plasma mass spectrometry

Rationale

Neurosteroids are important signalling molecules that modulate neuronal activity. Their low concentrations and low volatility make neurosteroid detection and quantification by ambient mass spectrometry challenging. Here we develop a reactive low‐temperature plasma mass spectrometry (LTP‐MS) method and demonstrate its potential for fast screening and quantification of neurosteroids in mouse brain.

Methods

Ketone‐based neurosteroids were analysed with the LTP‐MS method. The plasma of the LTP was heated in order to improve the desorption efficiency of low‐volatility neurosteroids. Methylamine with a concentration of 500 ppbv was employed as the reactive reagent. Neurosteroids in mouse brain tissue extracts were detected in 70 s with mass errors less than ±3 ppm due to coupling of the ion source with a high‐performance mass spectrometer.

Results

Reaction between neurosteroids and methylamine, seeded into the LTP gas stream, resulted in the formation of protonated methylamine–neurosteroid adducts with 5‐ to 100‐fold abundances, compared to [M + H]⁺ ions detected in non‐reactive LTP‐MS. The lowest detectable concentrations of neurosteroid standards were in the range of ng/mL. Concentrations of neurosteroids in male and female mouse brain extracts as determined with reactive LTP‐MS were on the level of ng/g, comparable to results obtained with high‐performance liquid chromatography–tandem mass spectrometry.

Conclusions

The developed reactive LTP‐MS is capable of providing sensitive identification and quantification of ketone‐based neurosteroids in mouse brain extracts with minimal sample treatment, and showcases the potential of reactive LTP‐MS as a tool for fast screening of neurosteroid levels in brain.

     

Synthesis, spectroscopic characterization, crystal structures, theoretical studies, and antibacterial evaluation of two novel N-phosphinyl ureas

Abstract  

Two novel N-phosphinyl ureas containing different substituents were synthesized and characterized by ¹H, ¹³C, and ³¹P NMR, IR, UV, mass spectroscopy, and elemental analysis. The crystal structures of these compounds were determined by X-ray crystallography. The structure of one compound exhibits the presence of two independent forms of the molecule with equal occupancy in the lattice and theoretical data reveal the same stabilization energies for these conformers. The title molecules have anti conformation with respect to the C=O and P=O bonds, whereas the other compound shows syn configuration. Quantum chemical calculations were applied to clarify this conformational behavior. Furthermore, the molecular geometry and vibrational frequencies of the new derivatives in the ground state were calculated by using the Hartree–Fock (HF) and density functional method (B3LYP) with 6-31+G** and 6-311+G** basis sets and compared with experimental values. The new derivatives were additionally tested in view of their antibacterial properties.     

Synthesis and reactivity of metal-containing monomers 49. Synthesis and structure of low-valence transition metal acrylates and their polymers

The methods for synthesis of Cu¹⁺, Fe²⁺, Cr²⁺, and V³⁺ acrylates were elaborated. The compounds obtained were characterized by elemental analyses, data of IR, X-ray photoelectron, and Mössbauer spectroscopy, magnetochemistry, and mass spectrometry. Polymeric products were obtained by liquid-phase radical polymerization of metal acrylates. Changes in the electronic state of the ions and their nearest ligand environment during polymerization were observed.     

Direct Organocatalytic Polymerization from Cellulose Fibers

Summary: We have developed the first direct, organocatalytic, bulk ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) with solid cotton and paper cellulose as the initiators. The mild ROPs were performed without solvent, and are operationally simple, inexpensive and environmentally benign. Organic‐acid‐catalyzed heterogeneous derivatization of cellulose provides a novel route to valuable cellulose‐based biocompatible nanomaterials. The furnished polymerization products were characterized by FTIR, ¹H and ¹³C NMR spectroscopy, MALDI‐TOF mass spectrometry and electron microscopy.

Organic acid‐catalyzed ring‐opening polymerization from cellulose fiber.     

Preparation of benzoate esters of morphine and its derivatives

Abstract  

Sustained analgesia is crucial for patients suffering from long-acting pain. Ester derivatives of morphine could enhance the lipophilicity of morphine; consequently its transdermal delivery as well as its duration of action are also increased. Therefore, twenty-one 3-O-, 6-O-, and 14-O-benzoate esters of morphine and their derivatives were synthesized in order to elaborate different synthetic methods suitable for esterification of these widely used compounds. Schotten–Baumann reaction was applied with sodium hydrogen carbonate, triethylamine, or pyridine in methylene chloride or 1,2-dichloroethane as solvents. The presence of 4-dimethylaminopyridine catalyst was also successfully utilized mainly in the case of tertiary alcohols. A novel synthesis of dihydromorphine via diacetyl morphine free of by-products is also presented. Structures of all synthesized compounds were elucidated by ¹H nuclear magnetic resonance (NMR), ¹³C NMR, high-resolution mass spectrometry (HRMS), and electron ionization mass spectrometry (EI-MS). The log D (pH 7.4) values of the synthesized compounds were determined by a reversed-phase high-performance liquid chromatography (HPLC)–MS-based method, and calculated hydrolysis rate constants are also provided. The synthesized benzoate esters are potential prodrugs of the parent morphine with enhanced lipophilicity, derivatives which can also be used in transdermal drug delivery as prospective long-acting narcotic analgesics.     

Synthesis of Star-Shaped Macromolecular Schiff Base Complexes Having Melamine Cores and Their Magnetic and Thermal Behaviors

Abstract

We aim to study magnetic and thermal behaviors of some melamine cored macromolecular Schiff base complexes. In this context, tripodal ligands were synthesized by reacting melamine with 4-carboxybenzaldehyde or 4-hydroxybenzaldehyde. Then, 16 new trinuclear Fe(III), Cr(III), Mn(III), and Al(III) complexes were synthesized by reacting the ligands [tris-(4-carboxybenzimino)-1,3,5-triazine) or tris-(4-hydroxybenzimino)-1,3,5-triazine)] with pentadentate Schiff bases N,N′-bis(1-hydroxy-2-benzyliden)-1,7-diamino-4-azaheptane or N,N′-bis(salicylidene)pyridine-2,6-diamine. Later, ligands and complexes were characterized by means of elemental analysis, infrared spectroscopy, ¹H NMR, liquid chromatography–mass spectrometry, thermal analyses, and magnetic susceptibility measurements. Finally, metal ratios of the prepared complexes were determined by using atomic adsorption spectrometry. The complexes were also characterized as distorted octahedral high-spin d ³ (S = 3 × 1/2) Cr(III), high-spin d ⁵ (S = 5 × 1/2) Fe(III), low-spin d ⁴ (S = 2 × 1/2) Mn(III), and diamagnetic Al(III) bridged by ?OH group of COO^? or OH group of phenol.     

Red electrophosphorescent platinum(II) quinolinolate complexes

Abstract  

Luminescent organoplatinum complexes featuring 8-quinolinolates as chelating ligands have been synthesized and characterized. Substitution of the quinolinolate ligand has been achieved in the 5 position, where benzoyl substituents were introduced by reacting 8-hydroxyquinoline and the corresponding benzoyl chloride in a Friedel–Crafts acylation. The resulting complexes, κ²(N,C²)-(2-(4-tert-butylphenyl)pyridine)-κ²(N,O)-(5-(4-tert-butylphenyl)(8-quinolinolato-5-yl)methanone)platinum(II) and κ²(N,C²)-(3-hexyloxy-2-phenylpyridine)-κ²(N,O)-((8-quinolinolato-5-yl)phenylmethanone)platinum(II), have been investigated by nuclear magnetic resonance and infrared spectroscopy, matrix-assisted laser desorption ionization time-of-flight mass spectrometry, X-ray analysis, thermal analysis, cyclic voltammetry, UV–vis absorption spectroscopy, and luminescence measurements in solution and in the solid state. The solid-state structures of the complexes were found to be dominated by π–π intermolecular interactions. Organic light-emitting devices based on the complexes and a matching host material gave red to near-infrared electroluminescence with low-onset voltages (4–5 V) and continuous wave luminance intensities exceeding 500 cd/m².     

The synthesis of new potential photosensitizers. 1. Mono-carboxylic acid derivatives of tetraphenylporphyrin

Abstract  

A series of mono-alkylcarboxylic acid derivatives of tetraphenylporphyrin have been prepared. All the porphyrins were completely characterized by use of mass, ¹H NMR, UV–visible, and fluorescence spectroscopy. Experimental log P were determined by use of reversed-phase thin-layer chromatography with use of log P _Rekker. These porphyrins are potential photosensitizers in photodynamic therapy.     

High‐precision determination of lithium and magnesium isotopes utilising single column separation and multi‐collector inductively coupled plasma mass spectrometry

Rationale

Li and Mg isotopes are increasingly used as a combined tool within the geosciences. However, established methods require separate sample purification protocols utilising several column separation procedures. This study presents a single‐step cation‐exchange method for quantitative separation of trace levels of Li and Mg from multiple sample matrices.

Methods

The column method utilises the macro‐porous AGMP‐50 resin and a high‐aspect ratio column, allowing quantitative separation of Li and Mg from natural waters, sediments, rocks and carbonate matrices following the same elution protocol. High‐precision isotope determination was conducted by multi‐collector inductively coupled plasma mass spectrometry (MC‐ICPMS) on the Thermo Scientific™ NEPTUNE Plus™ fitted with 10¹³ Ω amplifiers which allow accurate and precise measurements at ion beams ≤0.51 V.

Results

Sub‐nanogram Li samples (0.3–0.5 ng) were regularly separated (yielding Mg masses of 1–70 μg) using the presented column method. The total sample consumption during isotopic analysis is <0.5 ng Li and <115 ng Mg with long‐term external 2σ precisions of ±0.39‰ for δ⁷Li and ±0.07‰ for δ²⁶Mg. The results for geological reference standards and seawater analysed by our method are in excellent agreement with published values despite the order of magnitude lower sample consumption.

Conclusions

The possibility of eluting small sample masses and the low analytical sample consumption make this method ideal for samples of limited mass or low Li concentration, such as foraminifera, mineral separates or dilute river waters.

     

Accurate determination of the length of carbon nanotubes using multi-angle light scattering

We have prepared a kind of molecularly imprinted nano-porous sensing film for the adsorption of melamine. It consists of a graphite electrode impregnated with paraffin and modified with melamine, chitosan, silver nanoparticles and polyquercetin by employing an electrochemical method. The film displays excellent and highly selective sorption of melamine in the 3-dimensional porous nanomaterial, and this was applied to the determination of melamine in dairy products. The electrode responds linearly to melamine in the concentration range of 1?×?10^?8 to 9?×?10^?7?M, with a detection limit of 1.3?×?10^?9?M (at 3??) in real samples, and with recoveries in the range of 99 to 102%. The surface structure and composition of the sensor was characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, infrared spectroscopy, and electrochemical techniques. The interaction between the porous film and melamine was also studied by using hexacyanoferrate (III) as an electrochemical indicator.

Syntheses of trimethoxysilyl‐endcapped polylactones via 3‐mercaptopropyl trimethoxysilane

Monofunctional polylactones were prepared by Bu₂Sn(OMe)₂‐initiated ring‐opening polymerization of ε‐caprolactone (εCL) followed by acylation with bromoacetylbromide. Telechelic polylactones and polylactides were prepared via ring‐expansion polymerization with 2,2‐dibutyl‐2‐stanna‐1,3‐dioxepane (DSDOP) or 2,2‐dibutyl‐2‐stanna‐pentaoxacyclotridecane (Bu₂SnTEG) as cyclic initiator. In situ combination of the polymerization with condensation by means of bromoacetylbromide yielded polylactones having bromoacetate endgroups. These endgroups were subjected to nucleophilic substitution with 3‐mercaptopropyl trimethoxysilane (3‐MPTMS). Analogous experiments were conducted with dl‐lactide. The telechelic trimethoxysilyl‐endcapped polylactones were characterized by viscosity, ¹H and ¹³C NMR‐spectroscopy, and MALDI‐TOF mass spectrometry. The mass spectra revealed small amounts of cyclic oligolactones as byproducts in all samples. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3667–3674, 2005     

Synthesis, X-ray structures, and syndiospecific polymerization behavior of styrene of new (pentamethylcyclopentadientyl) titanatranes containing modified tetradentate triethanolamine ligands

A series of monomeric pentamethylcyclopentadienyltitanatranes, [n = 0, 1; n = 1, 2; n = 2, 3], were synthesized by the reaction of Cp∗TiCl₃ with corresponding triethanolamines such as (HOCH₂CH₂)_nN(CH₂CMe₂OH)_{3 − n} (n = 0, L1H₃; n = 1, L2H₃; n = 2, L3H₃), which varied by the number of CMe₂ groups adjacent to an OH functionality from 3 (L1H₃) to 2 (L2H₃) to 1 (L3H₃), in the presence of NEt₃. All complexes were characterized by elemental analysis and solution ¹H and ¹³C{¹H} NMR spectroscopy. Moreover, their solid state structures, which are slightly distorted three-legged piano stool geometry, have been confirmed by single crystal X-ray diffraction analysis. On activation with methylaluminoxane (MAO), these complexes showed good catalytic activity for the polymerization of styrene producing syndiotactic polystyrene (SPS) with high molecular weights. Compounds 1 and 2 bearing more than two pairs of methyl substituents on the side arms of triethanolamines showed the enhanced catalytic activities as the polymerization temperature went up from 50 °C to 110 °C, whereas less bulky complexes 3 and Cp∗Ti(OCH₂CH₂)₃N (4) gave the decreased activities as polymerization temperature rose. Unlike 3 and 4, complexes 1 and 2 in the presence of MAO as a cocatalyst gave SPS with controlled bimodal molecular weight distribution. Bimodal properties were much distinct at low polymerization temperature.