一种基于电光调制光频梳光谱干涉的绝对测距方法

提出了一种基于电光调制光学频率梳的光谱干涉测距方法.理论分析了电光调制光学频率梳的数学模型和光谱扩展原理,并分析得出了光谱干涉测距方法的非模糊范围和分辨力的影响因素.在实验中,使用三只级联的电光相位调制器调制单频连续波激光生成了40多阶高功率梳齿状边带,并通过单模光纤和高非线性光纤对电光调制器输出的激光进行光谱扩展,得到重复频率为10 GHz,光谱宽度达30 nm的光学频率梳.将该光频梳作为光谱干涉测距装置的光源,可以实现无"死区"的绝对距离测量.另外,使用等频率间隔重采样和二次方程脉冲峰值拟合算法对测量结果进行数据处理,可以修正系统误差,提升测距精度.实验结果表明,在1 m的测量范围内,使用该装置可以在任意位置达到±15μm以内的绝对测距精度.     

Generation of flat optical frequency comb by fiber loop modulation

We propose a novel flat optical frequency comb generation system that employs fiber loop modulation and experimentally demonstrate its operation. Generally, when an external laser beam is injected into a fiber loop system including an optical modulator and an amplifying medium, multiple sidebands are generated exponentially. On the other hand, the fiber loop starts mode-locked oscillation at a center frequency to maximize the round-trip gain in the fiber loop from the seeds of the injected laser sidebands. By locking the sidebands from fiber loop modulation with the mode-locked oscillation in the fiber loop, the synchronous spectrum between the mode-locked oscillation and the sidebands can be shaped into a flat spectrum. Thus, a flat optical frequency comb with a flatness of about ±1 dB is obtained in the spectral bandwidth of about 1 THz.     

Optical fiber strain sensor using fiber resonator based on frequency comb Vernier spectroscopy

A novel (to our best knowledge) optical fiber strain sensor using a fiber ring resonator based on frequency comb Vernier spectroscopy is proposed and demonstrated. A passively mode-locked optical fiber laser is employed to generate a phased-locked frequency comb. Strain applied to the optical fiber of the fiber ring resonator can be measured with the transmission spectrum. A good linearity is obtained between displacement and the inverse of wavelength spacing with an R(2) of 0.9989, and high sensitivities better than 40 pm/με within the range of 0 to 10 με are achieved. The sensitivity can be proportionally improved by increasing the length of the optical fiber ring resonator.     

Fiber chromatic dispersion measurement based on wavelength-to-time mapping using a femtosecond pulse laser and an optical comb filter

A novel method for the measurement of chromatic dispersion of an optical fiber based on wavelength-to-time mapping using a femtosecond pulse laser (FSPL) and an optical comb filter is proposed and experimentally evaluated. In the proposed approach, the spectrum of an ultrashort optical pulse generated by an FSPL is sliced by an optical comb filter. The spectrum-sliced optical pulse is then coupled into the optical fiber under test. Thanks to the chromatic-dispersion-induced wavelength-to-time mapping in the optical fiber under test, a time-domain waveform similar to the sliced spectrum is generated at the output of the optical fiber, with different frequency components having different time delays. The time delay vs. frequency data are then recorded for the estimation of the chromatic dispersion by using least square fitting. Chromatic dispersions of two types of optical fibers with different lengths are tested. The measured dispersion values agree well with those measured by the conventional modulation phase shift (MPS) method.     

掺Er光纤飞秒激光器载波包络位相偏移的探测

本文介绍了基于掺Er光纤飞秒激光器光学频率梳中光学部分的研制. 实验上采用重复频率为230 MHz的掺Er光纤飞秒激光器,通过放大、光谱展宽以及单臂f—2f系统,在优化及分析相关参数影响的基础上,获得了~30 dB信噪比f₀的输出,为光纤光学频率梳的建立奠定了基础. 关键词： 掺Er光纤激光器 光学频率计量 光纤光学频率梳 光谱展宽     

Fiber-based optical frequency comb at 3.3 μm for broadband spectroscopy of hydrocarbons [Invited]

A 125 MHz fiber-based frequency comb source in the mid-infrared wavelength region is presented. The source is based on difference frequency generation from a polarization-maintaining Er-doped fiber pump laser and covers a spectrum between2900 cm~(-1) and 3400 cm~(-1) with a simultaneous bandwidth of 170 cm~(-1) and an average output power up to 70 m W. The source is equipped with actuators and active feedback loops, ensuring long-term stability of the repetition rate, output power, and spectral envelope. An absorption spectrum of ethane and methane was measured using a Fourier transform spectrometer to verify the applicability of the mid-infrared comb to multispecies detection. The robustness and good long-and short-term stability of the source make it suitable for optical frequency comb spectroscopy of hydrocarbons.     

飞秒钛宝石光学频率梳的精密锁定

经相位锁定后的飞秒钛宝石光学频率梳已经广泛用于绝对光频的测量，这是光频标领域一个革命性的突破.在自建的90MHz飞秒钛宝石激光器的基础上首先采用光子晶体光纤将其光谱展宽到一个光倍频程，接着利用锁相环技术分别将重复频率和载波包络频移同时高精度地锁定到一台稳定度为6×10^－14的Cs钟上，进而得到了稳定度相同的飞秒光学频率梳.     

飞秒光学频率梳高精度气体吸收光谱技术进展

飞秒光学频率梳以其频谱宽、脉宽窄、频率稳定度高等优点,对光学频率计量、绝对距离测量、高精度光谱测定产生重大影响。飞秒光学频率梳的时域特性和频域特性溯源至微波频率基准,使得高精度气体吸收光谱探测成为可能。飞秒光学频率梳光谱技术具有测量速度快、光谱灵敏度高、分辨率高、信噪比高等优点,因此加大对飞秒光学频率梳光谱技术的研究力度将更好地服务于环境保护、工业生产、生物医学、科学研究等各领域。飞秒光频梳高精度气体吸收光谱主要可分为光频梳腔衰荡光谱、光频梳腔增强光谱和双光频梳多外差光谱。其中,根据采集方式不同,光频梳腔增强光谱又可分为梳齿游标测量法、虚拟成像相位阵列测量法和傅里叶变换测量法。目前,国外已广泛开展相关研究,而国内仍处于起步阶段。本文综述了飞秒光学频率梳高精度气体吸收光谱探测的主要技术方法,展示了不同测量方法典型的实验方案,分析了各探测方法的优缺点,并追踪了主要研究小组的前沿成果。     

Precise determination of characteristic laser frequencies by an Er-doped fiber optical frequency comb

Femtosecond optical frequency combs correlate the microwave and optical frequencies accurately and coherently. Therefore, any optical frequency in visible to near-infrared region can be directly traced to a microwave frequency. As a result, the length unit "meter" is directly related to the time unit "second". This paper validates the capability of the national wavelength standards based on a home-made Er-doped fiber femtosecond optical frequency comb to measure the laser frequencies ranging from visible to near-infrared region. Optical frequency conversion in the femtosecond optical frequency comb is achieved by combining spectral broadening in a highly nonlinear fiber with a single-point frequency-doubling scheme. The signal-to-noise ratio of the beat notes between the femtosecond optical frequency comb and the lasers at 633, 698, 729, 780, 1064, and 1542 nm is better than 30 dB. The frequency instability of the above lasers is evaluated by using a hydrogen clock signal with a instability of better than 1×10^-13 at 1-s averaging time. The measurement is further validated by measuring the absolute optical frequency of an iodine-stabilized 532-nm laser and an acetylene-stabilized 1542-nm laser. The results are within the uncertainty range of the international recommended values. Our results demonstrate the accurate optical frequency measurement of lasers at different frequencies using the femtosecond optical frequency comb, which is not only important for the precise and accurate traceability and calibration of the laser frequencies, but also provides technical support for establishing the national wavelength standards based on the femtosecond optical frequency comb.     

Octave spanning tunable frequency comb from a microresonator

We report the generation of an octave-spanning optical frequency comb in a continuous wave laser pumped microresonator. The generated comb spectrum covers the wavelength range from 990 to 2170 nm without relying on additional external broadening. Continuous tunability of the generated frequency comb over more than an entire free spectral range is demonstrated. Moreover, the linewidth of individual optical comb components and its relation to the pump laser phase noise is studied. The ability to derive octave-spanning spectra from microresonator comb generators represents a key step towards f-2f self-referencing of microresonator-based optical frequency combs.     

掺镱硼酸钙氧钇飞秒激光器及在拉锥光纤中产生跨倍频程超连续光

跨倍频程超连续光谱的产生是光学频率梳系统中测量载波包络相移频率的关键.本文采用拉锥单模光纤作为非线性光谱展宽介质, 将半导体激光(LD)抽运的掺镱硼酸钙氧钇(Yb:YCOB)振荡器输出的飞秒激光耦合到该拉锥光纤中, 通过飞秒激光在光纤中发生的相位调制、四波混频等非线性效应将光谱展宽至超过倍频程的范围.振荡器输出的飞秒激光脉冲宽度为130 fs, 中心波长为1052 nm, 重复频率为76.8 MHz, 平均功率为620 mW, 耦合进单模拉锥光纤后获得了光谱覆盖范围从550 nm至1350 nm的跨倍频程超连续光谱, 最大输出平均功率为323 mW, 耦合效率达到52%.为进一步实现全固态飞秒激光光学频率梳提供了重要基础.     

Phase-locked, erbium-fiber-laser-based frequency comb in the near infrared

A phase-locked frequency comb in the near infrared is demonstrated with a mode-locked, erbium-doped, fiber laser whose output is amplified and spectrally broadened in dispersion-flattened, highly nonlinear optical fiber to span from 1100 to >2200 nm. The supercontinuum output comprises a frequency comb with a spacing set by the laser repetition rate and an offset by the carrier-envelope offset frequency, which is detected with the standard f-to-2f heterodyne technique. The comb spacing and offset frequency are phase locked to a stable rf signal with a fiber stretcher in the laser cavity and by control of the pump laser power, respectively. This infrared comb permits frequency metrology experiments in the near infrared in a compact, fiber-laser-based system.     

Spectrally resolved optical frequency comb from a self-referenced 5 GHz femtosecond laser

We report a mode-locked Ti:sapphire femtosecond laser with 5GHz repetition rate. Spectral broadening of the 24 fs pulses in a microstructured fiber yields an octave-spanning spectrum and permits self-referencing and active stabilization of the emitted femtosecond laser frequency comb (FLFC). The individual modes of the 5 GHz FLFC are resolved with a high-resolution spectrometer based on a virtually imaged phased array spectral disperser. Isolation of single comb elements at a microwatt average power level is demonstrated. The combination of the high-power, frequency-stabilized 5 GHz laser and the straightforward resolution of its many modes will benefit applications in direct frequency comb spectroscopy. Additionally, such a stabilized FLFC should serve as a useful tool for direct mode-by-mode Fourier synthesis of optical waveforms.     

Precision phase control of an ultrawide-bandwidth femtosecond laser: a network of ultrastable frequency marks across the visible spectrum

We demonstrate that the stability of the current optical frequency comb generated by a Kerr-lens mode-locked femtosecond laser is limited by the microwave reference used for phase locking the comb spacing. Hence we implement precision frequency/phase control of the entire comb to the fundamental and second-harmonic frequencies of a stable cw laser without any external microwave reference. The stability of a cw iodine-stabilized laser is transferred to millions of comb lines (with an instability of 3 x 10(-13)) covering more than one octave of the optical frequency spectrum. In addition, the mode spacing of the comb can be used as a stable microwave frequency derived directly from a stable optical oscillator.     

PPLN晶体差频测量飞秒激光脉冲的载波包络相移

在飞秒激光频率梳系统中，通常采用自参考技术测量飞秒激光脉冲的载波包络相移，但该技术需要采用光子晶体光纤进行光谱扩展从而增加了系统的不稳定性，这种技术已经制约了高稳定度的飞秒激光频率梳的发展.采用PPLN晶体差频法测量了宽谱钛宝石振荡器输出的7fs激光脉冲的载波包络频移，得到了大于30dB的拍频信号，为研制无光纤的新一代高稳定度光学频率梳奠定了基础.     

Frequency-stabilized Yb:fiber comb with a tapered single-mode fiber

We demonstrate a stable Yb:fiber frequency comb with supercontinuum generation by using a specially designed tapered single-mode fiber, in which a spectrum spanning from 500 nm to 1500 nm is produced. The carrier-envelope offset signal of the Yb:fiber comb is measured with a signal-to-noise ratio of more than 40 dB and a linewidth narrower than120 k Hz. The repetition rate and carrier-envelope offset signals are simultaneously phase locked to a microwave reference frequency.     

Direct link between microwave and optical frequencies with a 300 THz femtosecond laser comb

We demonstrate a great simplification in the long-standing problem of measuring optical frequencies in terms of the cesium primary standard. An air-silica microstructure optical fiber broadens the frequency comb of a femtosecond laser to span the optical octave from 1064 to 532 nm, enabling us to measure the 282 THz frequency of an iodine-stabilized Nd:YAG laser directly in terms of the microwave frequency that controls the comb spacing. Additional measurements of established optical frequencies at 633 and 778 nm using the same femtosecond comb confirm the accepted uncertainties for these standards.     

覆盖可见光波长的掺Er光纤飞秒光学频率梳

飞秒光学频率梳波长覆盖范围向可见光波长扩展对于碘稳频激光的绝对频率测量以及光钟研究中钟激光的绝对频率测量都具有十分重要的意义. 本文在自行研制掺Er光纤飞秒光学频率梳的基础上, 采用放大-倍频-扩谱的方案, 实现了激光输出波长向可见光波长的扩展. 掺Er光纤飞秒光学频率梳输出的一部分光激光脉冲, 功率约为8 mW, 首先经掺Er光纤放大器将功率提高到531 mW, 此后利用MgO: PPLN晶体倍频, 倍频后激光的功率为170 mW, 倍频效率为32%, 脉冲宽度为85 fs. 倍频后的激光通过光子晶体光纤进行光谱展宽. 通过优化入射光偏振状态可以实现波长覆盖500-1000 nm, 输出功率为85 mW, 耦合效率为50%. 采用小型化碘稳频532 nm Nd: YAG激光器输出激光与光学频率梳光谱展宽后的激光进行拍频可以获得30 dB的拍频信号. 覆盖可见光波长的掺Er光纤飞秒光学频率梳为可见光范围内激光的绝对频率测量提供了技术手段.     

Frequency comb generation using femtosecond pulses and cross-phase modulation in optical fiber at arbitrary center frequencies

A technique is presented for generating optical frequency combs centered at arbitrary wavelengths by use of cross-phase modulation (XPM) between a femtosecond pulse train and a cw laser beam by copropagating these signals through an optical fiber. We report results from use of this method to place a 90-MHz frequency comb on an iodine-stabilized Nd:YAG laser at 1064 nm and on a frequency-doubled Nd:YVO(4) laser at 532 nm. XPM is verified to be the comb-generating process, and the width of the frequency comb is measured and compared with theory. The spacing of the frequency comb is compared with the femtosecond source, and a frequency measurement with this comb is demonstrated.     

High-power, hybrid Er:fiber/Tm:fiber frequency comb source in the 2 μm wavelength region

We present a 2 μm frequency comb based on a reliable mode-locked Er:fiber laser with 100 MHz repetition rate. After shifting the spectrum of the amplified Er:fiber comb to longer wavelengths, a single-clad Tm/Ho:fiber is used as a self-pumped pre-amplifier to generate a coherent and broadband spectrum centered at 1.93 μm. Subsequently, a cladding-pumped Tm:fiber amplifier boosts the system to a maximum output power of 4.8 W at 1.96 μm. After compression in a compact grating compressor, our amplified Er:fiber/Tm:fiber hybrid system delivers as much as 2.9 W with a pulse duration of 141 fs. The system's comb properties are examined via heterodyne measurement.