Soluble poly (aryl ether)s containing naphthalene pendant group: synthesis, characterization and electrospinning

Two soluble poly(aryl ether)s were prepared conveniently from bis(4-hydroxy-3,5-dimethylphenyl)naphthylmethane (1) and two activated dihalide monomers including 4,4′-difluorobenzophenone and bis(4-chlorophenyl)sulfone by an aromatic nucleophilic substitution. The bulky naphthyl and tetramethyl pendant groups in the polymer backbone could decrease the packing density and intermolecular interaction of macromolecular chain and make these poly(aryl ether)s show a good solubility. They all could be dissolved in CHCl₃, CH₂Cl₂ and tetrahydrofuran at room temperature with a dissolvability of more than 10 wt%. Furthermore, the poly(aryl ether)s could be electrospun into microfiber (10–15 μm) with nanopores (200–350 nm). The morphologies of these fibers were characterized by scanning electron microscopy. The porous morphology on the fiber surface was also investigated using scanning probe microscope.     

Synthesis and characterization of poly(aryl ether imide)s containing electroactive perylene diimide and naphthalene diimide units

The synthesis and polymerization of two new electroactive bisphenols derived from 3,4,9,10‐perylenetetracarboxylic dianhydride and 1,4,5,8‐naphthalenetetracarboxylic dianhydride with 2‐(4‐aminophenyl)‐2‐(4‐hydroxyphenyl)propane, respectively, are described. Copolymerization using the two new bisphenols and 4,4′‐isopropylidenediphenol with bis(4‐fluorophenyl)sulfone and 4,4′‐difluorobenzophenone, afforded a series of soluble electrochromic poly(aryl ether imide)s with glass‐transition temperatures ranging from 160 to 315 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3467–3475, 2000     

Novel soluble fluorinated poly(ether imide)s with different pendant groups: Synthesis,thermal, dielectric,and optical properties

Three types of new bis(ether dianhydride) monomers, [4,4′‐(2‐(3′‐methylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4a)], [4,4′‐(2‐(3′‐trifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4b)], and [4,4′‐(2‐(3′,5′‐ditrifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4c)] were prepared via a multistep reaction sequence. Three series of soluble poly(ether imide)s (PEIs) were prepared from the obtained dianhydrides by a two‐step chemical imidization method. Experimental results indicated that all the PEIs had glass transition temperature in the range of 200–230 °C and the temperature of 5% weight loss in the range of 520–590 °C under nitrogen. The PEIs showed excellent solubility in a variety of organic solvents due to introduction of the bulky pendant groups and were capable of forming tough films. The casting films of PEIs (80–91 μm in thickness) had tensile strengths in the range from 88 to 117 MPa, tensile modulus from 2.14 to 2.47 GPa, and elongation at break from 15 to 27%. The casting films showed UV‐Vis absorption edges at 357–377 nm, low dielectric constants of 2.73–2.82, and water uptakes lower than 0.66 wt %. The spin‐coated films of PEIs presented a minimum birefringence value as low as 0.0122 at 650 nm and low optical absorption at the optical communication wavelengths of 1310 and 1550 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3281–3289, 2010     

Synthesis and characterization of fluorinated poly(imide siloxane) block copolymers

Five new block copoly(imide siloxane)s have been prepared by reacting two different diamines, 4,4″-bis(p-aminophenoxy)-3,3″-trifluoromethyl terphenyl (APTTFT) and amino-propyl terminated polydimethylsiloxane (APPS), separately with 4,4′-(4,4′-isopropylidenediphenoxy)bis(phthalic anhydride); BPADA. The reactions were conducted by a two pot solution imidization technique. The diamine APTTFT and the dianhydride BPADA composed the hard block segment while APPS and BPADA composed the soft block segment. The soft and hard blocks of different block lengths were generated by different stoichiometric imbalance in two different flasks and the final polymers were obtained by reacting both the blocks together. Different block copoly(imide siloxane)s were prepared on increasing the hard block lengths (DP) from 7 to 12, 18, 23 and 28 and the soft block lengths (DP) from 4 to 6, 8, 10 and 12, respectively. The resulting polymers have been well characterized by NMR, DSC and DMA techniques. The properties of the block copolymers were compared with the analogous random copolymers and homopolyimide prepared without APPS.     

Novel processable and heat resistant poly(phenylthiourea azomethine imide)s: Synthesis and characterization

N-(4-chloro-3-aminobenzal)N′(4-aminophenyl)thiourea having phenylthiourea and azomethine groups was synthesized and exploited as starting material for the fabrication of new polymers. Novel diamine was condensed with pyromellitic dianhydride, 3,3′,4,4′-benzophenone-tetrcarboxylic dianhydride and 4,4′-(hexafluoroisopropylidene) diphthalic dianhydride to obtain poly(phenylthiourea azomethine imide)s. The structural explication of monomers and poly(phenylthiourea azomethine imide)s were carried out by FTIR, ¹H and ¹³C NMR techniques along with crystallinity, organosolubility, inherent viscosity and molecular weight measurements. Accordingly, polymers bearing CS and -CN- moieties in the backbone demonstrated an amorphous nature and were readily soluble in amide solvents such as DMAc, DMF, and DMSO. Poly(phenylthiourea azomethine imide)s encompassed η_inh of 1.40-1.55 dL/g and were obtained in quantitative yields. In addition, GPC measurements of polymers revealed M_w around 60,291-67,665. Thermal stability of these polymers was ascertained via 10% weight loss temperatures around 514-533 °C in an inert atmosphere. Besides, glass transition temperatures of polyimides were found to be 272-276 °C.     

Soluble poly(amide imide)s containing oligoether spacers

A diimide-diacid with oligoether spacer was synthesized from the condensation reaction of trimellitic anhydride with 1,8-diamino-3,6-dioxaoctane. Soluble poly(amide imide)s containing flexible groups were prepared through polycondensation reactions of diimide-diacid with different diamines via direct Yamazaki method. The poly(amide imide)s showed improved solubilty in polar aprotic solvents due to the presence of ether and alkyl flexible groups. According to the differential scanning calorimetry analysis, the glass transition temperatures of the polymers were in the range of 119-157 °C. According to thermogravimetric analysis, the temperatures for 10% weight losses were in the range of 348-387 °C that showed good thermal stabilities for these polymers.     

Novel photoluminescence poly(fluorinated imide)s electrospun fibers with blue, olive green and red fluorescence

Photoluminescence electrospun fibers were prepared from poly(fluorinated imide)s (PFIs) solutions. The studied PFIs included three fluorinated aromatic polyimides containing naphthalene pendant groups. The maximum UV–Vis absorption spectrums of the PFI fibers were located at 300–340 nm. The photoluminescence spectra indicated that the PFI fibers exhibited the following luminescence characteristics (excitation wavelength (nm); color): 330, blue; 450, olive green; 520, red. These phenomena could be attributed to the coexistence of naphthalene unit and fluorinated groups. The nanopores surface morphology of PFI fibers were studied using scanning electron microscopy and scanning probe microscopy. Surface wettability of PFI electrospun membranes were characterized by contact angle measurement. The contact angles on the electrospun poly(aryl ether) fibers for water and glycerol were in the range of 137.7–139.0° and 139.1–142.1°, respectively.     

Synthesis and characterization of new cardo poly(bisbenzothiazole-urea)s containing bulky pendant groups

A series of novel rigid poly(bisbenzothiazole-urea)s (PBTUs III) containing bulky pendant groups were synthesized from 2,2-diaminodibenzothiazoles and aromatic diisocyanates conveniently in the mild condition. The inherent viscosity, solubility, thermal stability, morphology, mechanical and photophysical properties of them were investigated and compared in detail. The inherent viscosities were in the range of 0.58-0.73 dL/g. All of the polymers exhibited excellent solubility in various polar organic solvents. They also showed good thermal stability and mechanical properties. The decomposition temperatures at 10% weight loss were in the range of 368-431 °C in nitrogen. All the PBTUs III were amorphous. Tensile strength of PBTUs III showed the range from 85 to 98 MPa. Compared with poly(benzothiazole)s, all the PBTUs III had the larger optical bandgap and lower photoluminescence quantum yields.     

Novel fluorinated poly(aryl ether ketone)s

Two novel fluorinated monomers were prepared and polymerized with biphenols to produce amorphous, thermally stable poly(aryl ether ketone)s. The properties of the fluorinated polymers are compared to those of unfluorinated, amorphous poly(aryl ether ketone)s. The presence of fluorine in the polymers was found to cause a decrease in glass transition temperature and Young's moduli, however, no increase in thermal stability was observed. The fluorinated polymers are soluble in common organic solvents such as chloroform and methylene chloride at room temperature, and also show solubility in solvents containing a ketonic moiety, such as acetone. Evidence of polymer branching through fluorines considered to be unreactive under the polymerization conditions was found. Efforts were made to evaluate the reactivity of fluorine atoms under the polymerization conditions using both molecular modeling and ¹⁹F-NMR to ascertain if such branching could be avoided. © 1995 John Wiley & Sons, Inc.     

Aromatic poly(amide-ether)s containing naphthalene and methylene unites

1,5-Naphthene dioxy diacetic acid was synthesized from the reaction of 1,5-naphthalene diol and chloroacetic acid. It was used then as a bi-functiona l monomer in polycondensation reaction with aromatic diamines in the presence of tripnenylphosphite to produce poly(amide-ether)s. All the obtained polymers were characterized by IR and elemental analysis; their solubility behaviour was evaluated in polar organic solvents as well as in concentrated H₂SO₄. The extent of thermal stability and phase transitions of poly(amide- ether)s were investigated by thermogravimetric analysis and differential scanning calorimetry respectively; while the morphology was estimated by X-ray powder diffraction patterns. Besides, the fu-fu stacking character of polymer chain interactions in the solid state was confirmed by absorption spectra of solid thin films.     

Synthesis and characterization of aromatic poly(ether sulfone)s containing pendant sodium sulfonate groups

Poly(ether sulfone)s containing pendant sodium sulfonate groups were prepared by the aromatic nucleophilic substitution reaction of 4,4′-dichlorodiphenylsulfone ( 1 ) and sodium 5,5′-sulfonylbis (2-chlorobenzenesulfonate) ( 2 ) with bisphenols ( 3 ) in the presence of potassium carbonate in N,N-dimethylacetamide. A new monomer 2 containing the sodium sulfonate groups was synthesized by the sulfonation of 1 with fuming sulfuric acid. The polycondensation proceeded smoothly at 170°C and produced the desired poly(ether sulfone)s containing the sodium sulfonate with inherent viscosities up to 1.2 dL/g. The polymers were quite soluble in strong acid, dipolar aprotic solvents, m-cresol, and dichloromethane. The thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 460°C in nitrogen atmosphere. Both the glass transition temperatures and hydrophilicity of the polymers increased with increasing their concentrations of sodium sulfonate groups. © 1993 John Wiley & Sons, Inc.     

Novel thermally stable poly(sulfone ether ester imide)s

A novel sulfone ether ester diamine was prepared by a three-step method. Reaction of 1,5-dihydroxy naphthalene with 4-nitrobenzoyl chloride afforded 5-hydroxy-1-naphthyl-4-nitrobenzoate. Reduction of nitro group by iron powder and HCl resulted in preparation of 5-hydroxyl-1-naphthyl-4-aminobenzoate. Reaction of this compound (two moles) with bis (4-chlorophenyl) sulfone led to preparation of a novel sulfone ether ester diamine. Three novel aromatic poly(sulfone ether ester imide)s were synthesized by polycondensation reactions of the prepared diamine with aromatic dianhydrides. Conventional methods were used to characterize the structure of the monomer and polymers. Physical properties of the polymers were also studied. The polyimides showed high thermal stability.     

新型含萘环聚芳醚酮无规共聚物的合成与表征

以无水AlCl3/ClCH2CH2Cl/NMP为催化剂／溶剂体系，由4，4'-二（α－萘氧基）二苯酮（DNBP），4、4'-二苯氧基二苯酮（DPOBP）和对苯二甲酰氯（TPC）通过低温溶液共缩聚反应，合成了一系列聚醚酮醚酮酮（PEKEKK）／含萘环聚醚酮醚酮酮无规共聚物。考察了单体浓度，反应时间对聚合物分子量的影响，并对其进行了IR、DSC、TG、XRD等表征。     

Synthesis and characterization of fluorinated poly(aryl ether ketone)s containing 1,4-naphthalene moieties

The new monomer 2,2-bis[4-(4-{4-fluorobenzoyl}-1-naphthoxy)phenyl]hexafluoropropane ( 2 ) was synthesized in a two-step reaction sequence. 2,2-his[4-(1-naphthoxy)phenyl]-hexafluoropropane ( 1 ) was prepared using the Ullmann ether synthesis reaction of 4,4-(hex-afluoroisopropylidiene)diphenol with 1-bromonaphthalene. Friedel-Crafts acylation of 1 with 4-fluorobenzoyl chloride in methylene chloride containing dimethylsulfone selectively afforded 2 in 82% yield. The polycondensation of 2 with various bisphenols in DMAc in the presence of an excess of potassium carbonate as a condensation reagent was carried out at 165°C to quantitatively afford the corresponding fluorinated poly(aryl ether ketone)s containing 1,4-naphthalene moieties. Thermal analysis of the polymers showed them to have T_gs ranging from 194 to 230°C and to be thermally stable in air up with initial weight losses at about 500°C. In addition, these novel polymers exhibited excellent solubility in organic solvents including NMP, DMAc, and chloroform. © 1997 John Wiley & Sons, Inc.     

Novel biodegradable copolyesters containing blocks of poly(3-hydroxyoctanoate) and poly(epsilon-caprolactone): synthesis and characterization

Novel biodegradable polyester block copolymers have been synthesized by using well-defined poly(3-hydroxyoctanoate) (PHO) oligomers having a hydroxyl end group and an ester end group with M(n) values of 800, 2,500, 5,300, 8,000, or 20,000 as an elastomeric soft segment and poly(epsilon-caprolactone) as a more crystalline segment. These PHO oligomers prepared by methanolysis were subjected to block copolymerization with epsilon-caprolactone. The chemical structure of the copolymers was confirmed by (1)H NMR and (13)C NMR spectroscopy. All the copolyesters are semi-crystalline and two T(g) were observed by differential scanning calorimetry when the molecular weight of the PHO block is about 20,000.     

Poly(amideimide)s containing pendant pentadecyl chains: Synthesis and characterization

A new aromatic diacylhydrazide monomer viz., 4-[4′-(hydrazinocarbonyl)phenoxy]-2- pentadecylbenzohydrazide was synthesized starting from cardanol, which in turn is obtainable from cashew nut shell liquid - a renewable resource material. A series of new poly(amideimide)s containing flexibilizing ether linkages and pendant pentadecyl chains was synthesized from 4-[4′-(hydrazinocarbonyl)phenoxy]-2-pentadecylbenzohydrazide and commercially available aromatic dianhydrides, viz., benzene-1,2,4,5-tetracarboxylic dianhydride, 3,3′,4,4′-biphenyltetracarboxylic dianhydride, benzophenone-3,3′,4,4′-tetracarboxylic dianhydride, 4,4′-oxydiphthalic anhydride and 4,4′-(hexafluoro isopropylidene)diphthalic anhydride by a two-step solution polycondensation in N,N-dimethylacetamide via the poly(hydrazide acid) intermediate. Inherent viscosities of poly(amideimide)s were in the range 0.60-0.64 dL/g in N,N-dimethylacetamide at 30 ± 0.1 °C. Poly(amideimide)s could be solution cast into tough, transparent and flexible films from their N,N-dimethylacetamide solutions. The solubility of poly(amideimide)s was significantly improved by incorporation of pendant pentadecyl chains and were found to be soluble in N,N-dimethylacetamide, 1-methyl-2-pyrrolidinone, pyridine and m-cresol at room temperature or upon heating. Wide angle X-ray diffraction patterns of poly(amideimide)s revealed a broad halo at around 2θ = ∼19° suggesting that polymers were amorphous in nature. In the small-angle region, diffuse to sharp reflections of a typically layered structure resulting from the packing of pentadecyl side chains were observed. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, of poly(amideimide)s was in the range of 388-410 °C indicating their good thermal stability. Glass transition temperatures of poly(amideimide)s were in the range 162-198 °C. It was observed that the plasticization effect of attached pentadecyl side chains induced the depression of T_g.     

Synthesis and thermal behaviour of silicon containing poly(ester imide)s

A series of silicon containing poly(ester imide)s [PEIs] were synthesized using novel vinyl silane diester anhydride (VSEA) and various aromatic and aliphatic dimines by two-step process includes ring-opening polyaddition reaction to form poly(amic acid) and thermal cyclo-dehydration process to obtain poly(ester imide)s. VSEA was synthesized by using dichloro methylvinylsilane and trimellitic anhydride in the presence of K₂CO₃ by nucleophilic substitution reaction. The PEIs were characterized by FTIR spectroscopy. The thermal properties of PEIs were investigated by using differential scanning calorimetry (DSC) and thermogravimetric analysis (TG) methods. The prepared PEIs showed glass transition temperatures in the range of 320–350°C and their 5% mass loss was recorded in the temperature range of 500–520°C in nitrogen atmosphere. These had char yield in the range of 45–55% at 800°C.     

Photocrosslinking of poly(methyl acrylate)s containing the 1,3-dioxolane structure as a pendant group

(2-Ethyl-2-methyl-1,3-dioxolan-4-yl)methyl- and (2-methyl-2-phenyl-1,3-dioxolan-4-yl) methyl acrylates were synthesized and polymerized. The photochemical behavior of the resulting polymers was investigated to determine whether the polymers pending on the 1,3-dioxolane structure were readily crosslinked with ultraviolet (UV) irradiation. The degree of crosslinking was estimated by the weight-loss method by immersion in acetone, with the result that the polymer with an aromatic substituent was more photocrosslinkable than the polymer that bore the aliphatic substituent. The catalytic effect on photocrosslinking of polymers was also studied by using benzoin and cobalt naphthenate. The infrared (IR) spectra of polymers irradiated in air that showed the new band at 3450 cm^?1 were attributed to a hydroxyl group; however, the spectra of polymers irradiated in vacuum displayed little absorption at 3450 cm^?1. To explain the mechanism of crosslinking model compounds were prepared and irradiated with UV light. It was concluded that crosslinking proceeds mainly from the fission of the 1,3-dioxolane ring and the coupling of the yielding radicals, together with autooxidation by atmospheric oxygen.     

Synthesis and structural characterization of novel,fluorinated poly(phthalazinone ether)s containing perfluorophenylene moieties

The synthesis and structural characterization of a series of novel, fluorinated poly(phthalazinone ether)s containing perfluorophenylene moieties are described. The monomers, 4‐(4′‐hydroxyaryl)phthalazin‐1(2H)‐ones ( 2a – 2d ), were conveniently and efficiently synthesized from phenols and phthalic anhydride in two steps via 2‐(4′‐hydroxybenzoyl)benzoic acids, which were first obtained by the Friedel–Crafts reaction in good yields and with high stereoselectivity and were then converted into 2a – 2d by fusion with hydrazine. All the polymers were prepared by nucleophilic aromatic substitution (S_NAr) polycondensation between the compounds perfluorobiphenyl and 4‐(4′‐hydroxyaryl)phthalazin‐1(2H)‐ones ( 2a ‐ 2d ). The resulting fluorinated polymers were readily soluble in common organic solvents (e.g., CHCl₃, tetrahydrofuran, dimethylformamide, dimethyl sulfoxide, N‐methylpyrrolidone, etc.) at room temperature. Their weight‐average molecular weights and the polydispersities ranged from (7.96–18.25) × 10³ to 1.31–2.71, respectively. Their glass‐transition temperatures varied from 213 to 263 °C. They were all stable up to 390 °C both in air and in argon. The 5% weight‐loss temperatures of these polymers in air and argon ranged from 393–487 to 437–509 °C, respectively. Wide‐angle X‐ray diffraction studies indicated they were all amorphous and could be attributed to the presence of kink nonplanar moiety, phenyl phthalazinone along the polymer backbone. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 925–932, 2004     

Synthesis and characterization of novel heat resistant poly(amide imide)s

A series of new poly(amide imide)s was prepared from new diacid containing sulfone, ether, amide and imide groups with various aromatic diamines. The diacid was synthesized via four steps, starting from reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide afforded N-(4-hydroxy phenyl)-4-nitrobenzamide. In the second step, reduction of nitro group resulted in preparation of 4-amino-N-(4-hydroxy phenyl) benzamide. In the next step for the preparation of diamine, the reaction of 4-amino-N-(4-hydroxy phenyl) benzamide with bis-(4-chlorophenyl) sulfone in the presence of K₂CO₃ was achieved. The prepared sulfone ether amide diamine was reacted with two moles of trimellitic anhydride to synthesize related sulfone ether amide imide diacid. The precursors and final monomer were characterized by FT-IR, H-NMR and elemental analysis. Direct polycondensation reaction of the sulfone ether amide imide diacid with different diamines in the presence of triphenyl phosphite afforded five different poly (sulfone ether amide imide amide)s. The obtained polymers were fully characterized and their physical properties including thermal behavior, thermal stability, solubility, and inherent viscosity were studied.