基底对光学薄膜弱吸收测量的影响

对表面热透镜技术测量光学薄膜弱吸收低频调制时不同基底对测量的影响进行了理论分析。用Lambda—900分光光度计测量了K9和石英基底的Ti3O5单层膜的吸收值,将该组样品作为定标片;用表面热透镜装置分别测量了BK7和石英空白基底及HfO2,ZnO两组不同基底不同厚度单层膜样品的吸收。通过分析比较同一工艺条件下镀制的不同基底薄膜样品用与其同种和不同种基底定标片定标测量的结果,表明在低频测量时需要用与测量样品同种基底的定标片定标;不同厚度样品的测量结果表明,在不能严格满足热薄条件时,测量结果需引入修正值。     

基底对光学薄膜弱吸收测量的影响

 对表面热透镜技术测量光学薄膜弱吸收低频调制时不同基底对测量的影响进行了理论分析。用Lambda—900分光光度计测量了K9和石英基底的Ti₃O₅单层膜的吸收值,将该组样品作为定标片;用表面热透镜装置分别测量了BK7和石英空白基底及HfO₂,ZnO两组不同基底不同厚度单层膜样品的吸收。通过分析比较同一工艺条件下镀制的不同基底薄膜样品用与其同种和不同种基底定标片定标测量的结果,表明在低频测量时需要用与测量样品同种基底的定标片定标;不同厚度样品的测量结果表明,在不能严格满足热薄条件时,测量结果需引入修正值。     

热释电IRFPA非均匀性校正实验系统研究

采用虚拟仪器技术,设计了基于LabVIEW软件平台的热释电IRFPA（红外焦平面阵列）非均匀性校正系统。该系统可通过控制面板选择校正算法,选取3种不同的标准像元的标准校正曲线。可以对IRFPA待校正的像元输出进行采集,对非均匀性参数进行测试,还可以进行非均匀性校正。系统通过三维波形以及图像的显示来观察校正前后对比,并能计算出校正前后的NU（非均匀性）值大小。对像元数为120160的热释电IRFPA输出的视频信号进行了非均匀性校正实验,对非均匀性校正算法进行了统计对比,对仿真结果及数据进行了分析总结。经过校正实验验证了系统的可行性,结果证明基于平均值法的两点定标算法对热释电IRFPA非均匀性校正后的NU值是最小的。通过统计数据得出校正后的NU可平均下降30%。     

一种基于畸变等效曲面的图像畸变校正

介绍了一种图像畸变的等效曲面模型,用于修正由于光学系统或图像传感器产生的畸变。分析了球形畸变模型的原理,推导出基于球形模型的畸变校正公式,并给出了基于球形模型的畸变校正的具体实现方法,通过实验对这种畸变校正的效果进行了验证。这种曲面畸变模型的校正具有实现简单,不需求解方程组等优点,并可以推广到其他曲面,具有比较广泛的实用性。     

Effective medium theory applied to frequency selective surfaces on periodic substrates

We apply the effective medium theory combined with the conventional periodic method of moments （MoM） to analyze frequency selective surfaces （FSSs） on periodic and anisotropic substrates. Based on the effective medium theory, even periodic and anisotropic substrates can be considered homogeneous; thus, the Green’s function can be obtained. The resulting integral equation can then be solved by the MoM using rooftop basis functions and Galerkin testing functions. We analyze an example using this technique, and the numerical results agree with Fallahi’s full-vector semi-analytical method, showing an increasing difference between the results as the frequencies increase. These results show that the proposed method is effective for analyzing FSSs on periodic and anisotropic substrates.     

一种基于区域分割与跟踪的多视点视频校正算法

针对多视点图像系统中视点图像颜色不一致的问题,提出了基于区域分割与跟踪的多视点视频校正算法.采用3维高斯混合模型来描述颜色信息,利用期望-最大算法来精炼模型参量,并通过自适应聚类和概率平滑操作来得到精确的分割图像.这样建立起多视点图像分割区域间的局部映射关系,并利用这种局部映射关系对全局图像进行校正.最后利用视频跟踪技术实现对视频图像的校正.实验结果表明,该算法能消除颜色过饱和或颜色区域混淆的影响,且具有较好的校正效果.     

A dual model strategy to transfer multivariate calibration models for near-infrared spectral analysis

A dual-model method is proposed for correcting the calibration model. In the method, a primary calibration model is built using the spectra of a primary instrument and a correction model is established to describe the ratios between the predicted results from the spectra of different instruments. The prediction for the spectra of secondary instrument can be achieved by correcting the prediction of the primary model. A mathematical proof is described for the existence of the correction model, and the model is investigated using a near-infrared spectroscopic dataset of plant leaf samples measured on two instruments. The results show that a precise correction model is obtained and the model can be used to correct the predictions of the primary model. The correlation coefficients between the predicted and the reference ratios are above 0.9, and the prediction error after the correction is at the same level of the primary model.     

光子计数位置灵敏探测器畸变多项式校正

采用多项式校正方法对光子计数位置灵敏探测器成像畸变进行校正。介绍光子计数位置灵敏探测器工作原理并分析其畸变产生原因;介绍多项式校正原理,并给出光子计数位置灵敏探测器畸变多项式校正流程;采用该方法对两种不同畸变程度的基于楔条形阳极该类探测器进行了畸变校正,校正后残余误差分别为2.5pixel和1.2pixel。实验结果表明,多项式校正法能够有效校正光子计数位置灵敏探测器成像畸变。     

Activity in manufacturing and characterization of X-ray optical elements and ultrahigh-resolution systems at IPM RAS

The latest developments in the field of metrology and correction of high-ratio substrates for X-ray optics with a subnanometer scale accuracy, carried out at the Institute for Physics of Microstructures (IPM), Russian Academy of Sciences, are reported. A scheme of an interferometer with a diffracted reference wave, based on a single-mode fiber with a narrowed exit aperture, is reported. Some methods for shape correction are described.     

一种多视点视频自动颜色校正系统

针对多视点视频系统中视点间图像颜色不一致的问题,提出了一种多视点视频自动颜色校正系统。通过求取目标图像和源图像间的颜色校正矩阵,判断其是否满足全局校正的要求;对不满足要求的图像,通过图像分割和K-L变换(Karhunen-Loeve transform),建立起目标图像和源图像中各分割区域间的局部映射关系,并通过感兴趣区域匹配,来实现对源图像的校正,最后通过视频跟踪技术实现对视频图像的校正。以标准的多视点测试图像集为例,通过将新方法与直方图匹配、全局一维线性校正算法等进行比较,表明新方法能消除匹配失真的影响,且具有较好的颜色校正效果。研究结果表明该系统可以很好地揭示图像间的颜色变化关系,并且具有很好的内容自适应性,是一种有效的多视点视频图像系统颜色校正方法。     

基于FPGA的图像畸变矫正算法研究

在机器视觉中需要对采集到的带有畸变的图像进行矫正。为了提高对畸变图像校正的实时性,针对使用FPGA实现图像畸变矫正算法时,存在的在线计算逆向映射坐标复杂和片上ROM容量不够问题,压缩了逆向映射表,并在FPGA上利用插值方法在线重建了逆向映射表。通过查找重建的逆向映射表来获取逆向映射坐标,从而降低了FPGA的在线计算量和片上ROM的容量需求。MATLAB仿真结果显示,当压缩参数n分别取4、8、16时都能够对畸变图像进行较好的矫正,并且图像信息不会丢失。仿真结果验证了算法的有效性,该算法可用于基于FPGA的图像畸变矫正。     

一种水下对空成像失真的校正方法

水下光电对空成像失真现象,主要包括位置畸变和灰度衰减两部分,在分析成像过程的基础上,分别推导出了畸变校正数学模型和灰度校正数学模型.采用双线性插值法来处理空间变换后的灰度插值问题,最终实现了灰度校正和畸变校正的同步.设计了以标准网格为目标靶面的实验来采集匹配点的信息以获取校正模型的相关参数.实验表明本方法能较好地还原出图像的真实信息,对图像失真校正具有较好的实用性.     

聚谷氨酸发酵过程中ATR-FTIR光谱信号的分数阶基线校正

采用衰减全反射傅里叶变换红外光谱法（ATR-FTIR）,结合多元校正模型对γ-聚谷氨酸（γ-PGA）发酵过程中两种主要底物葡萄糖和谷氨酸钠的浓度进行间接测量,为优化发酵系统控制提供重要的反馈信息。光谱测量中经常出现的基线漂移会严重影响后续多元校正模型的性能,需要采用基线校正算法对光谱进行预处理。现有流行的基线校正算法多数是基于Whittaker Smoother（WS）平滑算法,这些算法均采用整数阶微分对拟合基线进行约束,表达能力有限。针对现有基线校正算法中的整数阶微分自适应性差的问题,利用更加灵活的分数阶微分对基线进行约束,提出了一种基于分数阶的基线校正算法,实现对整数阶基线校正的扩展。总共进行了5个批次的γ-PGA发酵实验,并对不同批次和全部批次的ATR-FTIR光谱数据分别进行了分数阶基线校正,模型的预测精度均得到不同程度的提升。实验结果表明,只有在批次2时,基于整数阶的基线校正效果最好;其他批次的基线校正效果最好时的阶次均为分数阶。这也表明了分数阶微分（包含整数阶微分）对基线的约束更加合理。同时发现全部批次的整体基线校正效果远远差于单一批次的效果,原因可能是各批次发酵光谱的基线是不同的,对不同的批次需要选用不同的阶次以获得最佳的基线校正。此外,γ-PGA发酵样品的ATR-FTIR光谱测量是以蒸馏水为背景,会在3 100~3 600 cm-1波数范围内出现负水峰,形成有害的干扰信号;分数阶基线校正后的光谱表明,分数阶基线校正算法将负的水峰当作基线,在一定程度上进行了消除。综上分析,分数阶基线校正算法不仅扩展了传统整数阶基线校正算法的应用范围,也为消除ATR光谱中负的水峰提供了新的解决思路。     

Stoney equation limits for samples deformed as a cylindrical surface

This paper proposes a three-dimensional system for modelling stress in thin films deposited on thick substrates deformed as a small cylindrical surface by means of the minimization of the deformation energy. The results show the validity limits of the well-established Stoney equation and indicate the necessity of a correction term for substrates with Poisson ratio (ν_s) in the range of 0.25 < ν_s ≤ 0.4.     

A theoretical investigation of flow-induced instabilities in compliant coatings

The flow-induced instabilities of a fairly general class of compliant coatings are investigated theoretically. The coatings are of finite length and consist of elastic plates or membranes stretched over a fluid substrate having a density which may be different from the main flow. Provision is also made for the plate to be backed by an elastic foundation of arbitrary spring stiffness. Fairly standard aeroelastic methods are followed. The aerodynamic forces generated by the main flow are calculated by using thin aerofoil theory with a correction factor to allow for the presence of a boundary layer. The pressure induced in the substrate fluid is calculated by assuming potential flow and applying the method of images. A single-mode analysis shows that coatings with laminar boundary layers suffer a divergence-type instability in contrast to turbulent boundary layers which always give rise to a flutter-type instability with a higher critical velocity. The order of the most dangerous mode is calculated and found to rise with an increase in equivalent spring stiffness for fixed tension or flexural rigidity. Results are presented for plates and membrane coatings with an air stream over air and water substrates. Taking account of the substrate fluid dynamics reduces the growth rate of the instability by an order of magnitude and completely suppresses flutter with water substrates. Single-, double- and triple-mode analyses are carried out and the results compared. The critical velocity is adequately predicted by single-mode analysis but a coupling of odd and even modes can lead to flutter even with a laminar boundary layer.     

曲率型自适应光学系统对低阶Zernike像差校正能力

数值模拟了37单元曲率型自适应光学系统的波前校正过程,分析了该系统对低阶Zernike像差的校正效果,结果表明:低阶Zernike像差均能够得到较好的校正。分别对曲率为零和不为零的Zernike像差校正效果进行了对比分析,结果发现:曲率为零的Zernike像差同样可以被曲率型自适应光学系统校正,而且效果好于曲率不为零的Zernike像差校正。     

帧差分智能视频监控系统图像亮度的校正

在基于帧差分的智能视频监控系统中,图像亮度改变对目标物体的识别和跟踪可能造成严重影响。通过对比一些常用亮度校正方法,选用比例变换法进行深入研究。为保证校正效果,预先指定一个不受目标物体影响的区域,根据其平均灰度确定变换因子。为满足实时性要求,仅当连续2帧的亮度改变超过某一阈值时才进行校正。在Visual C++ 6.0下编程时又采取了一些措施提高程序运行速度,例如将浮点运算转换为整数运算等。实验表明:亮度校正前无法识别出的目标物体在亮度校正后可识别出来,校正一帧图像耗时约1.2 ms,当阈值取1或2时校正效果与校正速度综合最好。     

Aberration-free lateral shear holographic interferometry

Lateral shear interferometry is considered as a possible means for optical correction of wave fronts reconstructed from singly and doubly exposed holograms. Optical aberrations are eliminated in a moiré pattern by superposing two lateral shear interferograms using waves diffracted by original holograms. It is shown that the singly exposed hologram allows compensation for only optical inhomogeneities due to the substrate, while the doubly exposed hologram also excludes aberrations due to the recording system. The experimental results supporting the efficiency of the method as applied to imperfect substrates of holograms are presented.     

利用普通视频CCD作为紫外激光和软X射线探测器的研究

 介绍了利用价格便宜的普通视频CCD来获取紫外激光和软X射线图像的方法和应用结果，以代替价格昂贵的紫外CCD、使用不方便的X光胶片或者昂贵的X光CCD，其关键点是：（1）去除CCD相机的自动增益校正；（2）将相机的校正系数γ值设置为1；（3）去除CCD相机前面的保护窗。作为一种简易的装置，可以用于紫外激光测量及激光与等离子体相互作用研究。结果表明，采用改造后的普通视频CCD测量紫外激光光斑，准确可靠，其灵敏度比科学级紫外CCD的低一个量级，它还可以测量软X射线的二维分布，作为X光针孔相机使用非常方便。     

BEPCⅡ LINAC束流光学匹配及轨道校正计算研究

 北京正负电子对撞机直线注入器(BEPCⅡ LINAC)的升级改进要求建立束流光学匹配计算和轨道校正系统，为此对束流光学匹配计算和轨道校正计算的方法进行了研究，并采用VC++语言编写了相应的程序，利用最小二乘法原理进行了束流光学匹配计算，模拟了束流轨道校正，取得了较为理想的结果。