Heterogeneous Wheel‐Shaped Cu20‐Polyoxotungstate [Cu20Cl(OH)24(H2O)12(P8W48O184)]25− Catalyst for Solvent‐Free Aerobic Oxidation of n‐Hexadecane

The selective oxidation of alkanes as a green process remains a challenging task because partial oxidation is easier to achieve with sacrificial oxidants, such as hydrogen peroxide, alkyl hydroperoxides or iodosylbenzene, than with molecular oxygen or air. Here, we report on a heterogeneous catalyst for n‐hexadecane oxidation comprised of the wheel shaped Cu₂₀‐polyoxotungstate [Cu₂₀Cl(OH)₂₄(H₂O)₁₂(P₈W₄₈O₁₈₄)]^25? anchored on 3‐aminopropyltriethoxysilane (apts)‐modified SBA‐15. The catalysts were characterized by powder X‐ray diffraction (XRD), N₂‐adsorption measurements and Fourier transform infrared reflectance (FT‐IR) spectroscopy. The heterogeneous Cu₂₀‐polyanion system catalyzed the solvent‐free aerobic oxidation of n‐hexadecane to alcohols and ketones by using air as the oxidant under ambient conditions. The catalyst exhibits an exceptionally high turn over frequency (TOF) of 20 000 h^?1 at 150 °C and is resistant to poisoning by CS₂. Moreover, it can be easily recovered and reused by filtration without loss of its catalytic activity. Possible homogeneous contributions also have been examined and eliminated. Thus, this system can use air as oxidant, which, in combination with its good overall performance and poison tolerance, raises the prospect of this type of heterogeneous catalyst for practical applications.     

Wheel-shaped polyoxotungstate [Cu20Cl(OH)24(H2O)12(P8W48O184)]25- macroanions form supramolecular "blackberry" structure in aqueous solution

The hydrophilic polyoxotungstate [Cu20Cl(OH)24(H2O)12(P8W48O184)]25- ({Cu20P8W48}) self-assembles into single-layer, hollow, spherical "blackberry"-type structures in aqueous solutions, as studied by dynamic light scattering (DLS), static light scattering (SLS), zeta potential analysis, and scanning electron microscopy (SEM) techniques. This represents the first report of blackberry formation for a non-Mo-containing polyoxometalate. There is no obvious change in the shape and size of the blackberries during the slow blackberry formation process, neither with macroionic concentration nor with temperature. Our results suggest that the blackberry-type structure formation is most likely a general phenomenon for hydrophilic macroions with suitable size and charge in a polar solvent, and not a specific property of polyoxomolybdates and their derivatives. The {Cu20P8W48} macroions are thus far the smallest type of macroions to date (equivalent radius < 2 nm) showing the unique self-assembly behavior, helping us to move one step closer toward identifying the transition point from simple ions (can be described by the Debye-Hückel theory) to macroions in very dilute solutions. Moreover, by using {Cu20P8W48} blackberry-type structures as the model system, the electrophoretic properties of macroionic supramolecular structures are studied for the first time via zeta-potential analysis. The mobility of blackberry-type structures is determined and used for understanding the state of small cations in solution. We notice that the average charge density on each {Cu20P8W48} macroanion in a blackberry is much lower than that of discrete "free" {Cu20P8W48} macroions. This result suggests that some small alkali counterions are closely associated with, or even incorporated into, the blackberry-type structures and thus do not contribute to solution conductivity. This model is fully consistent with our speculation that monovalent counterions play an important role in the self-assembly of macroions, possibly providing an attractive force contributing to blackberry formation.     

STM/STS observation of polyoxoanions on HOPG surfaces: the wheel-shaped [Cu20Cl(OH)24(H2O)12(P8W48O184)]25- and the ball-shaped [{Sn(CH3)2(H2O)}24{Sn(CH3)2}12(A-PW9O34)12]36-

A combination of scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) techniques have been performed on the wheel-shaped [Cu20Cl(OH)24(H2O)12(P8W48O184)]25- and the ball-shaped [{Sn(CH3)2(H2O)}24{Sn(CH3)2}12(A-PW9O34)12]36- deposited on highly oriented pyrolytic graphite surfaces. Small, regular molecule clusters, as well as separated single molecules, were observed. The size of the molecules is in agreement with the data determined by X-ray crystallography. In STS measurements, we found a rather large contrast at the expected location of the Cu metal centers in our molecules, i.e., the location of the individual Cu ions in their organic matrix is directly addressable by STS.     

Organic-inorganic hybrids based on novel bimolecular [Si2W22Cu2O78(H2O)]12- polyoxometalates and the polynuclear complex cations [Cu(ac)(phen)(H2O)]n n+ (n=2, 3)

The reaction of a monosubstituted Keggin polyoxometalate (POM) generated in situ with copper-phenanthroline complexes in excess ammonium or rubidium acetate led to the formation of the hybrid metal organic-inorganic compounds A7[Cu2(ac)2(phen)2(H2O)2][Cu3(ac)3(phen)3(H2O)3][Si2W22Cu2O78(H2O)].approximately 18 H2O (A=NH4+ (1), Rb+ (2); ac=acetate; phen=1,10-phenanthroline). These compounds are constructed from inorganic and metalorganic interpenetrated sublattices containing the novel bimolecular Keggin POM, [Si2W22Cu2O78(H2O)]12-, and Cu-ac-phen complexes, [Cu(ac)(phen)(H2O)]n n+ (n=2, 3). The packing of compound 1 can be viewed as a stacking of open-framework layers parallel to the xy plane built of hydrogen-bonded POMs, and zigzag columns of pi-stacked Cu-ac-phen complex cations running along the [111] direction. Magnetic and EPR results are discussed with respect to the crystal structure of the compounds. DFT calculations on [Cu(ac)(phen)(H2O)]n n+ cationic complexes have been performed, to check the influence of packing in the complex geometry and determine the magnetic exchange pathways.     

Dititanium-containing 19-tungstodiarsenate(III) [Ti2(OH)2As2W19O67(H2O)]8-: synthesis, structure, electrochemistry, and oxidation catalysis

The dititanium-containing 19-tungstodiarsenate(III) [Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)](8-) (1) has been synthesized and characterized by IR, TGA, elemental analysis, electrochemistry, and catalytic studies. Single-crystal X-ray analysis was carried out on Cs(8)[Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)].2CsCl.12H(2)O (Cs-1), which crystallizes in the monoclinic system, space group P2(1)/m, with a=12.7764(19), b=19.425(3), c=18.149(3) A, beta=110.234(3) degrees, and Z=2. Polyanion 1 comprises two (B-alpha-As(III)W(9)O(33)) Keggin moieties linked through an octahedral {WO(5)(H(2)O)} fragment and two unprecedented square-pyramidal {TiO(4)(OH)} groups, leading to a sandwich-type structure with nominal C(2v) symmetry. Synthesis of 1 was accomplished by reaction of TiOSO(4) and K(14)[As(2)W(19)O(67)(H(2)O)] in a 2:1 molar ratio in aqueous, acidic medium (pH 2). Polyanion 1 could also be isolated as a tetra-n-butyl ammonium (TBA) salt, {(n-C(4)H(9))(4)N}(5)H(3)[Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)] (TBA-1). TBA-1 was studied by cyclic voltammetry in acetonitrile (MeCN) solutions containing 0.1 M LiClO(4) and compared with the results obtained with Cs-1 in aqueous media. In MeCN, the Ti(IV) and W(VI) waves could not be separated distinctly. An important adsorption phenomenon on the glassy carbon working electrode was encountered both in cyclic voltammetry and in controlled potential electrolysis and was confirmed by Electrochemical Quartz Crystal Microbalance (EQCM) studies on a carbon film. TBA-1, dissolved in MeCN, reacts with H(2)O(2) to give peroxo complexes stable enough for characterization by UV-visible spectroscopy, cyclic voltammetry, and EQCM. TBA-1 shows high catalytic activity (TOF=11.3 h(-1)) in cyclohexene oxidation with aqueous H(2)O(2) producing products typical of a heterolytic oxidation mechanism. The stability of TBA-1 under turnover conditions was confirmed by using IR, UV-visible spectroscopy as well as cyclic voltammetry.     

K3Na5(H2NCH2CH2NH3)2{(VO)12O6[B3O6(OH)]6}(H2O)•12H2O的合成与晶体结构

利用水热合成技术成功制备出一种新型多钒硼氧化合物， 用X射线单晶衍射分析技术对其晶体结构和分子结构进行了确定。结果表明在该化合物中多钒硼氧阴离子具有一个新颖的三明治结构。上下两个结构单元都是由六个VO₅四角锥交替地通过顺式和反式共边的方式连接起来构成的一个钒氧三角形结构。中间的结构单元是由BO₃平面三角形和BO₄四面体以共角的方式相互连接形成的一个折叠型的B₁₈O₃₆(OH)₆环。三明治结构中层与层之间通过桥氧相连。一个水分子处于它的核心位置上，与每个VO₅四角锥中的钒原子都保持几乎相等的距离。该化合物及其晶体中存在着丰富的化学结构和成键信息，同时也有作为氧化还原反应催化剂的潜能。     

Synthesis and Crystal Structures of Two Complexes [Mn2(L)2(H2bta)2(H2O)]n and[Cu2(L)(H2bta)0.5(H2O)]n

Two new complexes, [Mn₂(L)₂(H₂bta)₂(H₂O)]_n ( 1 ) and [Cu₂(L)(H₂bta)_0.5(H₂O)]_n ( 2 ) (H₄bta=1,2,4,5‐benzene‐tetracarboxylic acid, L=imidazo[4,5‐f][1,10]phenathroline) were prepared under hydrothermal conditions and their structures determined by single‐crystal X‐ray diffration. The X‐ray diffraction reveals that complex 1 , consisting of two crystallographically independent fragments A1 and A2, displays an interesting 3D supramolecular network constructed with ABAB sequence through hydrogen bonding interactions. In complex 2 , the copper atoms connected by the H₂bta^2? ligands, the chains also are assembled into a 3D honeycomb configuration network formed by moleculars and aromatic π‐π stacking interactions.