基于壳聚糖修饰碳纳米管表面铅离子印迹材料的制备及其性能研究

以壳聚糖修饰的多壁碳纳米管为基材.Pb2+为模板分子,乙烯化壳聚糖(CS)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,在碳纳米管表面枝接一层Pb2+印迹聚合物.采用红外光谱、热重分析和扫描电镜对聚合物进行表征和分析.结果表明.在碳纳米管上成功制备了一层15～20 nm厚的Pb2+印迹聚合材料.采用原子吸收法...     

分子印迹技术用于模拟酶及分子反应器的研究进展

分子印迹技术是制备特异性分子识别材料的新技术. 分子印迹聚合物(Molecularly-imprinted polymer, MIP)具有可同酶相媲美的选择性识别能力, 能够催化手性及区域选择性的反应, 是一种新型的分子反应器; 同时MIP具有良好的化学和物理稳定性, 因而在替代酶用于某些苛刻条件下的催化反应方面有良好的应用前景. 就近年来利用MIP模拟酶催化有机合成反应, 以及利用MIP作为分子反应器反面的研究进展进行了综述.     

虚拟模板/硅胶表面分子印迹材料的制备及其在海水溶液中的吸附行为研究

以萘乙酸为虚拟模板,以甲基丙烯酸为功能单体、二甲基丙烯酸乙二醇酯为交联剂,用表面聚合-牺牲硅胶法合成了孔状结构的萘分子印迹聚合物.采用红外光谱、扫描电镜和N2吸附实验对印迹聚合物进行了表征;运用理论化学计算探讨了功能单体的筛选方法;利用平衡吸附法考察了印迹材料对海水中萘、蒽、菲化合物选择识别特性.实验表明: 以α-萘乙酸分子为模板的分子印迹聚合物对萘具有较好的识别能力.另外,由于α-萘乙酸分子中羧基的存在,使得分子印迹聚合物(MIP)的印迹空穴又与菲的体积大小相匹配,所以也表现出对菲的独特吸附能力.制备的印迹材料可望用于海水中2～3环多环芳烃的选择性吸附与富集.     

多壁碳纳米管表面邻苯二甲酸二(2-乙基)己酯印迹聚合物的制备及其在固相萃取中的应用

以苯基修饰的多壁碳纳米管为载体,邻苯二甲酸二(2-乙基)己酯为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在碳纳米管表面接枝一层塑化剂邻苯二甲酸二(2-乙基)己酯印迹聚合层.采用红外光谱和扫描电镜对聚合物进行表征和分析.结果表明,在碳纳米管表面成功接枝一层20～30 nm厚的印迹聚合层.采用高效液相色谱研究该印迹聚合物的吸附性能,结果表明,碳纳米管分子印迹聚合物对邻苯二甲酸二(2-乙基)己酯最大吸附量为69.1 μmol/g,达到吸附平衡时间约为60 min.选择性吸附实验表明,与其它结构类似物相比,该印迹复合材料对邻苯二甲酸二(2-乙基)己酯有良好的识别能力.作为固相萃取材料装填于固相萃取柱中,该印迹聚合物能对芒果汁样品中塑化剂进行有效的分离和富集.     

硅胶表面水胺硫磷分子印迹聚合物的制备及其性能

以水胺硫磷为模板分子,甲基丙烯酸（MAA）为功能单体,三羟甲基丙烷三甲基丙烯酸酯（TRIM）为交联剂,采用表面分子印迹技术,以商品化硅胶为基体,合成了对有机磷农药水胺硫磷具有良好选择性的表面分子印迹聚合物（MIP）。 用红外光谱（IR）、扫描电子显微镜（SEM）和元素分析等技术分别对表面印迹聚合物进行了结构表征和表面形态观察;静态吸附平衡实验和Scatchard分析表明,该印迹聚合物中存在着两类不同的结合位点,离解常数分别为4.84×10-3和15.2×10-3 mol/L。与非印迹聚合物相比,MIP对水胺硫磷有较大的特异性吸附能力,其印迹因子为2.73。     

在硅胶表面制备牛血红蛋白分子印迹聚合物

采用表面印迹法, 以乙烯基三甲氧基硅烷修饰的硅胶为载体, 丙烯酰胺为功能单体, N,N-亚甲基双丙烯酰胺为交联剂, 并将改性聚乙烯醇(PVA)作为辅助识别聚合物链(ARPCs)引入聚合体系中, 制备了牛血红蛋白分子印迹聚合物(MIP). 实验使用红外光谱分析了改性PVA的结构特征, 用扫描电镜(SEM)观察MIP的表面形貌, 考察了ARPCs的含量对MIP吸附性能的影响. 吸附动力学实验研究表明, 聚合体系中ARPCs的引入使MIP对模板牛血红蛋白(BHb)的吸附量明显提高|十二烷基磺酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)结果显示, MIP对BHb的特异性吸附能力明显提高.     

分子印迹聚合物负载纳米金催化剂的制备及其底物识别性能

以4-硝基苯甲醇与氯金酸的络合物为模板,利用聚合物空腔内胺基捕获NaBH4还原的纳米粒子,设计和制备了一种具有底物识别性能的分子印迹聚合物负载纳米Au催化剂(Au/MIP).运用红外光谱、紫外-可见光谱和扫描电镜等方法对催化剂进行了表征.同时以水为溶剂,过氧化氢为氧化剂,考察了催化剂在取代苯甲醇氧化反应中的催化性能.结...     

分子印迹聚合物选择性降低烟气中稠环芳烃类物质

以芘(PYR)为模板,由热引发本体聚合合成了芘分子印迹聚合物(MIP),考察了印迹聚合物的选择性吸附性能,采用Scatchard模型分析了印迹聚合物的结合特性,用离线固相萃取实验考察了印迹聚合物对同类底物的吸附能力,并将芘分子印迹聚合物应用到卷烟滤嘴中,用GC/MS法考察了卷烟主流烟气中稠环芳烃类物质释放量的变化。 结果表明,芘分子印迹聚合物具有选择性降低卷烟烟气中稠环芳烃类物质的功能,当MIP添加量为1.5 mg时,能将卷烟烟气中的苯并[a]芘(B[a]P)、苯并(a)蒽(B[a]A)和苣(CHR)的释放量分别降低31.08%、25.69%和27.33%。     

分子印迹聚合物选择性降低烟气中稠环芳烃类物质

以芘(PYR)为模板,由热引发本体聚合合成了芘分子印迹聚合物(MIP),考察了印迹聚合物的选择性吸附性能,采用Scatchard模型分析了印迹聚合物的结合特性,用离线固相萃取实验考察了印迹聚合物对同类底物的吸附能力,并将芘分子印迹聚合物应用到卷烟滤嘴中,用GC/MS法考察了卷烟主流烟气中稠环芳烃类物质释放量的变化。结果表明,芘分子印迹聚合物具有选择性降低卷烟烟气中稠环芳烃类物质的功能,当MIP添加量为1.5 mg时,能将卷烟烟气中的苯并[a]芘(B[a]P)、苯并(a)蒽(B[a]A)和苣(CHR)的释放量分别降低31.08%、25.69%和27.33%。     

非诺贝特印迹聚合物的制备与性能研究

以非诺贝特(FNB)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了FNB分子印迹聚合物(MIP)。IR和SEM表征的结果显示:FNB分子印迹聚合物中存在与模板分子相互作用的特征基团,与空白聚合物(NIP)的表面形态显著不同,说明MIP存在与模板分子相互识别的结合位点。采用静态平衡结合方法和Scatchard模型评价了FNB分子印迹聚合物的结合特性和识别机理,并考察了其选择性吸附能力。结果表明,FNB分子印迹聚合物存在能量相异的两类特异性结合位点,对FNB具有高选择吸附特性,饱和吸附量为6.363mg/g。     

多壁碳纳米管表面过氧化苯甲酰印迹复合材料的制备及固相萃取应用

以过氧化苯甲酰(BOP)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用热聚合法在多壁碳纳米管(MWNTs)表面制备印迹聚合物(MWNTs-MIPs)。采用红外和热重分析等技术对聚合物结构进行表征。采用液相色谱考察该分子印迹聚合物对过氧化苯甲酰的吸附特性。结果表明该印迹聚合物对过氧化苯甲酰表现出特异性吸附,该印迹聚合物对模板分子存在一种结合位点,其最大表观结合量为56.20 µmol/g。该印迹聚合物成功应用于固相萃取富集面粉中微量过氧化苯甲酰,浓度富集因子为526。     

碳纳米管表面绿原酸印迹固相萃取材料的制备及应用

在多壁碳纳米管表面接枝的双键键合,以绿原酸为模板,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合技术,在碳纳米管表面成功制备绿原酸印迹材料.采用红外光谱、扫描电镜和热重分析研究此印迹材料的性能.结果表明,在碳纳米管表面接枝一层稳定、均匀、30～40 nm厚的印迹材料.采用高效液相色谱研究此印迹材料的吸附动力学及吸附容量,实验结果表明,此印迹材料对绿原酸的结合存在两个结合位点,最大吸附容量Qmax分别为21.5和32.7 μmol/g.以此印迹材料作为固相萃取剂,优化萃取条件,成功应用于金银花提取液中绿原酸的富集分离研究,富集因子达25.     

Molecular imprinted polymers binding low functionality templates

A series of highly specific molecular imprinted polymers (MIPs) for small, low functionality bicyclic Diels-Alder products was prepared as bulk polymers.     

Biotin-specific synthetic receptors prepared using molecular imprinting

The composition of new molecularly imprinted polymers (MIPs) specific for biotin was optimised using molecular modelling software. Three functional monomers: methacrylic acid (MAA), 2-(trifluoromethyl)acrylic acid (TFAA) and 2-acrylamido-2-methylpropanesulfonic acid (AMPSA), which demonstrated the highest binding scores with biotin, were tested on their ability to generate specific binding sites. The imprinted polymers were photografted to the surface of polystyrene microspheres in water. The affinity of the synthetic “receptor” sites was evaluated in binding experiments using horseradish peroxidase-labelled biotin. Good correlation was found between the modelling results and the performance of the materials in the template re-binding study. The dissociation constants for all MIPs were 1.4-16.8 nM, which is sufficient for most analytical applications where biotin is used as a label.     

Diels-Alder Reactivity of a Chiral Anthracene Template with Symmetrical and Unsymmetrical Dienophiles: A DFT Study

In this work, we used Density Functional Theory calculations to assess the factors that control the reactivity of a chiral anthracene template with three sets of dienophiles including maleic anhydrides, maleimides and acetoxy lactones in the context of Diels-Alder cycloadditions. The results obtained here (at the M06-2X/6-311++G(d,p) level of theory) suggest that the activation energies for maleic anhydrides and acetoxy lactones are dependent on the nature of the substituent in the dienophile. Among all studied substituents, only −CN reduces the energy barrier of the cycloaddition. For maleimides, the activation energies are independent of the heteroatom of the dienophile and the R group attached to it. The analysis of frontier molecular orbitals, charge transfer and the activation strain model (at the M06-2X/TZVP level based on M06-2X/6-311++G(d,p) geometries) suggest that the activation energies in maleic anhydrides are mainly controlled by the amount of charge transfer from the diene to the dienophile during cycloaddition. For maleimides, there is a dual control of interaction and strain energies on the activation energies, whereas for the acetoxy lactones the activation energies seem to be controlled by the degree of template distortion at the transition state. Finally, calculations show that considering a catalyst on the studied cycloadditions changes the reaction mechanism from concerted to stepwise and proceed with much lower activation energies.     

三唑酮分子印迹预组装体系的分子模拟与吸附性能

以三唑酮为模板分子, 以丙烯酰胺(AM)、 丙烯酸(AA)、 甲基丙烯酸(MAA)和三氟甲基丙烯酸(TFMAA)为功能单体预组装了分子印迹聚合物体系, 采用半经验法和从头算法, 利用Hyperchem软件模拟了三唑酮与4种功能单体所组成的分子印迹预组装体系的构型、 能量、 反应配比及复合反应的结合能, 选择复合物结合能最高的功能单体用于分子印迹聚合物的合成. 采用密度泛函方法计算了模板与单体在不同致孔剂中的溶剂化能. 结果表明, 三唑酮与三氟甲基丙烯酸所形成复合物的作用力最强, 在非极性溶剂中溶剂化能最弱. 由预组装体系的差示紫外光谱法研究发现, 一分子三唑酮可与两分子三氟甲基丙烯酸在氯仿中形成氢键复合物, 与分子模拟的结果一致. 在最佳模拟条件下, 合成了三唑酮的印迹聚合物, 利用吸附等温线Langmuir和Freundlich模型研究了印迹聚合物的吸附行为及识别机理. 上述方法对于分子印迹体系的筛选及分子印迹聚合物性能的预测有重要的意义.     

胆固醇MIPs的合成及其免疫吸附性能评价和应用

胆固醇MIPs的合成及其免疫吸附性能评价和应用;胆固醇;分子印迹聚合物;固相萃取;效率;生物样品     

Electron transfer activation of the Diels-Alder reaction: Quantitative relationship to charge transfer excited states

The Diels-Alder cycloaddition of anthracene to tetracyanoethylene (TCNE) is quantitatively compared to alkylmetal insertion under the same reaction conditions. In both systems, the observation of transient charge transfer (CT) absorption bands is related to the presence of 1:1 electron donor-acceptor complexes of anthracene (Ar) and alkylmetal (RM) donors with the TCNE acceptor. The activation free energies ΔG3 for anthracene cycloaddition and alkylmetal insertion are found to be equal to the energies of ion-pair formation, i.e. [Ar⁺TCNE^?] and RM⁺TCNE^?], which are evaluated from the CT transition energies hν_CT. Indeed, the differences in the rates of alkylmetal insertion and anthracene cycloaddition by a factor of more than 10⁹, are shown quantitatively to arise from the differences in ion-pair solvation ΔG^s. The same differences in ΔG^s also apply quantitatively to the free ions, [Ar⁺] and [RM⁺], independently derived from the electrochemical and iron(III) oxidations of alkylmetals and aromatic compounds, respectively, by outer- sphere electron transfer. The charge transfer formulation of the activation process but provides a unifying basis for comparing such diverse processes as Diels-Alder cycloadditions and organometal cleavages, when a common electron-deficient acceptor is employed. The relationship to the concerted mechanisms of the Diels-Alder reaction is discussed.     

Thermally reversible C60-based donor-acceptor ensembles

Diels-Alder cycloaddition of anthracene derivatives--bearing fused pi-extended TTFs--to C60 yielded thermally reversible donor-acceptor materials which function as fluorescence switches.     

Molecular Recognition Ability of Molecularly Imprinted Polymer Nano- and Micro-Particles by Reversible Addition-Fragmentation Chain Transfer Polymerization

The role of molecularly imprinted polymers (MIPs) is changing from academic to applied researches. Challenging problems about MIP will be more highlighted in applicable uses and solving these problems is vital. The controlled/“living” radical polymerization (CLRP) techniques are applicable to solve the challenging problems in MIPs. The “living” nature of CLRP helps to improve the heterogeneity of binding sites in MIPs as a main challenge where precise control over sizes, compositions, and surface functionalities is achieved. Among different techniques of CLRP, reversible addition-fragmentation chain transfer (RAFT) technique presents distinguished benefits such as compatibility and tolerance to a wide range of functional monomers and mild reaction conditions rather than other CLRP techniques. In this review, in order to obtain more insights into the potential benefits of RAFT polymerization in fabrication of nano and micro MIP networks, recent research in advanced MIP materials for different templates with improved morphology, efficiency, and binding capacities with respect to traditional free radical polymerization (FRP) will be discussed. MIPs prepared via RAFT method have advantages of MIPs as high performance molecular recognition devices and CLRP as controllable polymerization mechanism, simultaneously.