Properties of TRPO-HNO<Subscript>3</Subscript> complex used for direct dissolution of lanthanide and actinide oxides in supercritical fluid CO<Subscript>2</Subscript>

The mixed trialkylphosphine oxide-nitric acid (TRPO-HNO₃) complex prepared by contacting pure TRPO with concentrated HNO₃ may be used as additives for direct dissolution of lanthanide and actinide oxides in the supercritical fluid carbon dioxide (SCF-CO₂). Properties of the TRPO-HNO₃ complex have been studied. Experimental results show when the initial HNO₃/TRPO volume ratio is varied from 1:7 to 5:1, the concentration of HNO₃ in the TRPO-HNO₃ complex changes from 2.12 to 6.16 mol/L, the [HNO₃]/[TRPO] ratio of the TRPO-HNO₃ complex changes from 0.93 to 3.38, and the content of H₂O in the TRPO-HNO₃ complex changes from 0.97% to 2.70%. All of the density, viscosity and surface tension of the TRPO-HNO₃ complex change with the concentration of HNO₃ in the complex. The protons of HNO₃ and H₂O in the complex undergo rapid exchange to exhibit a singlet resonance peak in NMR spectra with D₂O insert. When the TRPO-HNO₃ complex dissolves in a low dielectric constant solvent, small droplets of HNO₃ appear which can be detected by NMR. Supported by the National Natural Science Foundation of China (Grant No. 20506014)     

Study on Properties of TBP-HNO3 Complex Used for Direct Dissolution of Lanthanide and Actinide Oxides in Supercritical Fluid CO2

The tri-n-butyl phosphate-nitric acid （TBP-HNO3） complex prepared by contacting the pure TBP with the concentrated HNO3 can be used for direct dissolution of lanthanide and actinide oxides in the supercritical fluid carbon dioxide （SCF-CO2）. Properties of the TBP-HNO3 complex have been studied. Experimental results showed that when the initial HNO3/TBP volume ratio was varied from 1 ： 7 to 5 ： 1, the concentration of HNO3 in the TBP-HNO3 complex changed from 1.95 to 5.89 mol/L, the [HNO3]/[TBP] ratio of the TBP-HNO3 complex changed from 0.61 to 2.22, and the content of H20 in the TBP-HNO3 complex changed from 2.02% to 4.19%. All of the density, viscosity and surface tension of the TBP-HNO3 complex changed with the concentration of HNO3 in the complex, and were higher than those of the pure TBE The protons of HNO3 and H2O in the complex underwent rapid exchange to exhibit a singlet resonance peak in nuclear magnetic resonance spectra. When the TBP-HNO3 complex was dissolved in a low dielectric constant solvent, small droplets of HNO3 were formed that can be detected by NMR.     

在超临界CO2流体中的化学反应

超临界CO2流体中的化学反应是继超临界流体应用于萃取分离过程之后进一步将其应用于化学反应的新尝试。本文重点综述了超临界CO2流体中的化学反应研究进展, 并对其发展前景作了展望。     

Dehydrogenation of propane in the presence of CO2 on Cr(3%)/SiO2 catalyst under supercritical conditions

1. Download : Download high-res image (78KB)
2. Download : Download full-size image

     

Considerations for analytical supercritical fluid extraction of sulfonyl ureas employing a modified fluid

Important considerations are discussed for analytical SFE method development employing methanol–modified carbon dioxide and solid-phase trapping. The focus of this study was to break the method development procedure into distinct steps so that the origins of low recoveries could be determined conclusively. Sulfonyl urea herbicides were used as probe analytes. Analyte solubility, analyte trapping, analyte trap removal (solid-phase), and extract analysis were all shown to be equally important in achieving quantitative SFE recoveries.     

Exploration and optimization of conditions for quantitative analysis of lignans in Schisandra chinensis by an online supercritical fluid extraction with supercritical fluid chromatography system

An online supercritical fluid extraction with supercritical fluid chromatography system could provide sequential extraction and quantitative analysis of lignans in Schisandra chinensis. Supercritical fluid extraction conditions were optimized at 15 MPa, 50°C, and 4 min with supercritical CO₂ adding 1% methanol; the elution volume and flow rate were set at 6 mL and 2 mL/min to blow extract out of the tank completely. The split‐flow rate was confirmed at 2.5%, which determines injection volume and accuracy of quantitative detection. The factors having negative influences on supercritical fluid chromatography retention in the online system, including sample loading forms and backpressure settings, are discussed in the paper. At last, an extraction‐quantitative method for lignans in Schisandra chinensis was developed, which could be finished within 19.5 min. The total content percentage of four lignans (Schisandrin, Schisandrin A, Schisandrin B and Schisandrol B) in four batches was respectively measured to be 1.42, 1.54, 1.62, and 1.90%.     

A brief study of the supercritical fluid chromatographic behavior of lanthanide β-diketonates

The chromatographic behaviors of lanthanide chelates of acetylacetone (ACAC), trifluoroacetylacetone (TFA), thenoyltrifluoroacetone (TTA), dipivaloylmethane (THD), 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedione (FOD), and the thenoyltrifluoroacetonepyridine (TTA·Py) adduct were investigated using packed column supercritical fluid chromatography. Mobile phases consisting of neat and alcohol modified CO₂ were used with a phenyl packed stationary phase. Lanthanide complexes of ACAC, THD, and FOD were shown to have better chromatographic performance compared to the corresponding chelates with TFA, TTA, and TTA·Py. In particular, TTA complexes such as Eu(TTA)₃ showed characteristic thermal decomposition in the mobile phase at elevated temperature. In addition, retention behavior was found to be a temperature dependent function of volatility and solubility for all chelates studied.     

Dissolution and extraction of actinide oxides in supercritical carbon dioxide containing the complex of tri-n-butylphosphate with nitric acid

Dissolution of individual actinide oxides (Th, U, Pu, Np), or their mechanical mixtures, as well as of solid solutions U–Pu, U–Np, U–Am and U-Pu-Eu oxides in supercritical fluid carbon dioxide (SF-CO₂) containing the complex of tri-n-butyl phosphate (TBP) with nitric acid (TBP–HNO₃) has been investigated. The effect of the calcination temperature of solid solutions of dioxides on the separation of actinides during supercritical fluid extraction (SFE) has been studied as well. It was shown for the first time that milligram amounts of uranium dioxide could be quantitatively dissolved in (SF-CO₂) containing the TBP–HNO₃ complex and efficiently separated from Pu, Np, and Th during SFE of mechanical mixture of these oxides. On the contrary, both U and Pu are quantitatively dissolved in SF-CO₂–TBP–HNO₃ during SFE from solid solutions of U–Pu dioxide. An increase of the calcination temperature of the mixed U(IV)–Pu(IV) dioxide from 850 to 1200 °C has no influence on the relative extraction yield of these actinides during SFE. To cite this article: T. Trofimov et al., C. R. Chimie 7 (2004).

Résumé

Dissolution d’oxides d'actinides et extraction d’éléments dans le dioxide de carbone supercritique contenant le complexe tri-n-butylphosphate–acide nitrique. La dissolution d’oxydes de Th, U, Pu et Np, de leurs mélanges et de solutions solides U–Pu, U–Np, U–Am et U–Pu–Eu dans le dioxyde de carbone supercritique (CO₂-SC) contenant le complexe tri-n-butyl phosphate–acide nitrique (TBP–HNO₃) a été étudiée, et notamment l’effet de la température de calcination des solutions solides. On montre que quelques milligrammes de UO₂ peuvent être dissous dans le système CO₂-SC–TBP–HNO₃ et être séparés de Pu, Np et Th en traitant un mélange d’oxydes. En revanche, U et Pu sont dissous dans la phase CO₂-SC–TBP–HNO₃ durant le traitement des solutions solides U(IV)–Pu(IV). Une augmentation de la température de calcination de 850 à 1200 °C de ces solutions solides n’a pas d’effet sur le rendement d’extraction des actinides. Pour citer cet article : T. Trofimov et al., C. R. Chimie 7 (2004).     

Density of supercritical CO_2-tetrahydrofuran binary mixture and the partial molar volume of the cosolvent

The densities of supercritical CO2-tetrahydrofuran (cosolvent) binary mixture weremeasured at temperatures in range of 308.15 to 323.15 K and at pressure up to 16.5 MPa.The concentrations of tetrahydrofuran were from 0 to 0.57 mol/L.The partial molar volume of tetrahydrofuran was calculated based on the relationship between the density of the mixture and the concentration of the cosolvent.It is observed that the partial molar volume of the cosolvent is negative and the absolute value decreases with increasing pressure and the concentration of the cosolvent.     

Application of NO2/supercritical CO2 system for safe and selective nitration of adamantanes and tertiary alkyl bromides

A concise safe approach for selective nitration and nitroxylation of tert-alkanes, in particular adamantane, and tert-alkyl bromides utilizing NO₂ in supercritical CO₂ medium has been established. Major reaction products were tert-alkyl nitro compounds and tert-alkyl nitrates depending on the reaction conditions.     

超临界CO_2在化学反应中的应用进展

本文详细地综述了最近几年来有关超临界CO2流体中的化学反应的研究成果，展望了超临界CO2化学反应的开发应用前景，试图让这一崭新的研究领域受到更加广泛的关注。     

Dispersion polymerization of 2‐hydroxyethyl methacrylate in supercritical carbon dioxide

Herein we report a successful dispersion polymerization of 2‐hydroxyethyl methacrylate (HEMA) in a carbon dioxide continuous phase with a block copolymer consisting of polystyrene and poly(1,1‐dihydroperfluorooctyl acrylate) as a stabilizer. Poly(2‐hydroxyethyl methacrylate) was effectively emulsified in carbon dioxide with the amphiphilic diblock copolymer surfactant, and the successful stabilization of the polymerization simultaneously gave spherical particles in the submicrometer range with relatively narrow particle size distributions. The initial concentrations of HEMA and the stabilizer and the pressure had substantial effects on the size of the colloidal particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3783–3790, 2000     

Direct coupling of capillary supercritical fluid chromatography with supercritical fluid extraction using modified carbon dioxide

Capillary supercritical fluid chromatography has been directly coupled with supercritical fluid extraction using modified carbon dioxide. The mixed fluids were prepared with a single pump on-line mixing system. The most important step in the SFE-SFC interface was the elimination of the modifier solvent. This was achieved by use of a coupled trap, 0.1 mm i.d. and 0.53 mm i.d. capillary tubing connected in series, with the collected solutes refocused on the second (0.53 mm i.d.) trap before transfer into the separation column. This enabled complete elimination of various modifier solvents and high efficiency collection of the solutes. The effect of the modifier on trapping efficiency was investigated using methanol, ethanol, dichloromethane, hexane, and toluene at a variety of concentrations. n-Eicosane was, for example, trapped quantitatively by modified carbon dioxide containing up to 13 % (w/w) methanol. The use of the technique has been demonstrated by selective extraction of n-paraffins, fatty acid methyl esters, and alcohols from a silica matrix; the effect of different modifiers on the extraction of a mixture of pesticides from soil has also been investigated.     

用超临界流体干燥法制备纳米级二氧化锆

本文采用超临界流体干燥技术（Supercriticalfliuddryingtechnique），用超临界乙醇作干燥（脱水）剂制备了纳米粒子ZrO_2，并用X－射线衍射和透射电镜对其进行了表征．结果表明，用超临界流体干燥法能获得颗粒细、大小均匀和抗团聚性能好的纳米粒子。     

Selective hydrogenation of phenol in supercritical carbon dioxide

Liquid phase hydrogenation of phenol over Pt/C catalysts was investigated under conventional conditions and supercritical carbon dioxide (scCO2). The equivalent ration of hydrogen to phenol shows a significant effect on the product selectivity. Hydrogenation of phenol in different solvents was also studied, the experimental results show that polarity of solvents influences the yield of cyclohexanone remarkably, scCO2 has the highest one. Catalytic hydrogenation of phenol in scCO2 or sub-scCO2 was emphatically researched. The result is that near the critical point of CO2 phenol has higher reaction activity than that of normal organic solvents, cyclohexanone has 47% in yield and 87% in selectivity.     

Metal(salen)-catalyzed oxidation of limonene in supercritical CO2

Summary The Mn(Salen)Cl and Ni(Salen)-catalyzed oxidation of limonene has been carried out. The catalytic cycle involved PhIO via a rebound mechanism. In all cases the use of organic solvents resulted in reasonable selectivities of oxidized products. The use of supercritical carbon dioxide (SCCO₂) led at least to comparable results in terms of conversions, but showed different selectivities. In ordinary solvents epoxidation appears to predominate over allylic oxidation. This tendency, in SCCO₂, appears only after 4 h of reaction. Shorter reaction times (2 h) appear to lead to opposite selectivity. These results showed the advantages of using SCCO₂ as solvent in these reactions. SCCO₂ is much more compatible with green technology than are organic solvents.     

Free-standing arrays of isolated TiO2 nanotubes through supercritical fluid drying

A common complication in fabricating arrays of TiO(2) nanotubes is that they agglomerate into tightly packed bundles during the inevitable solvent evaporation step. This problem is particularly acute for template-fabricated TiO(2) nanotubes, as the geometric tunability of this technique enables relatively large inter-pore spacings or, from another perspective, more space for lateral displacement. Our work showed that agglomeration results from the surface tension forces that are present as the ambient solvent is evaporated from the nanotube film. Herein, we report a processing and fabrication approach that utilizes supercritical fluid drying (CO(2)) to prepare arrays of template-fabricated TiO(2) nanotubes that are free-standing and spatially isolated. This approach could be beneficial to many emerging technologies, such as solid-state dye-sensitized solar cells and vertically-oriented carbon nanotube electrodes.     

超临界二氧化碳介质中钯催化末端炔烃双羰基化反应的研究

在超临界二氧化碳介质中，钯催化末端炔烃双羰基化反应时需要加入适当量的 醇作为共溶剂，反应才能顺利进行，而且反应规律与常规有机溶剂有所区别．