Single-chain polymers as homogeneous oxidative photoredox catalysts

Single-chain polymer nanoparticles (SCNPs) are emerging as versatile catalytic platforms that provide excellent control over solubility. The confined nature of SCNPs can improve the rate of catalysis. While significant headway has been made in thermally-induced transition-metal catalysis with SCNPs, light-activated SCNP catalysts have received little attention. We are developing triarylpyrylium tetrafluoroborate (TPT)-functionalized SCNPs as oxidative photocatalysts. Herein, we comprehensively study the impact of light source on both SCNP compaction and TPT absorbance through gel-permeation chromatography and UV/Vis spectroscopy. We observe that compaction is expedited using light sources that excite the photocatalyst (e.g., blue LEDs), which is attributed to the ability of TPT to dimerize sytrenics under similar photoredox conditions. The resultant metal-free SCNP photocatalysts enable the oxidation of benzyl alcohols in good yields. The SCNP is further investigated for the amidation of 4-bromobenzaldehyde, wherein it affords higher yields of the benzamide product compared to both small-molecule and unfolded polymer controls. We attribute the combined results to the colocalization of the TPT photoredox catalyst and pyrene electron relay within the SCNP, which likely aids in single-electron transfer processes. The scope of amidation reactions was also extended to other aryl aldehydes, wherein deactivated substrates afforded the highest yield of the desired amide.     

A Solvent‐Based Strategy for Tuning the Internal Structure of Metallo‐Folded Single‐Chain Nanoparticles

Controlling the spatial distribution of catalytic sites in metallo‐folded single‐chain nanoparticles (SCNPs) is a first step toward the rational design of improved catalytic soft nano‐objects. Here an unexplored pathway is reported for tuning the internal structure of metallo‐folded SCNPs. Unlike the conventional SCNP synthesis in good solvent (protocol I), the proposed new route (protocol II) is based on the use of amphiphilic random copolymers and transfer, after SCNP formation, from selective to good (nonselective) solvent conditions. The size and morphology of the SCNPs obtained by the two protocols, and the corresponding spatial distribution of the catalytic sites, have been determined by combining results from size exclusion chromatography with triple detection, small‐angle X‐ray scattering and molecular dynamics (MD) simulations. Remarkably, the use of these protocols allows the tuning of the internal structure of the metallo‐folded SCNPs, as supported by MD simulations results. While the conventional protocol I yields a homogeneous distribution of the catalytic sites in the SCNP, these are arranged into clusters in the case of protocol II.

     

Metal‐Folded Single‐Chain Nanoparticle: Nanoclusters and Self‐Assembled Reduction‐Responsive Sub‐5‐nm Discrete Subdomains

Easy access to discrete nanoclusters in metal‐folded single‐chain nanoparticles (metal‐SCNPs) and independent ultrafine sudomains in the assemblies via coordination‐driven self‐assembly of hydrophilic copolymer containing 9% imidazole groups is reported herein. ¹H NMR, dynamic light scattering, and NMR diffusion‐ordered spectroscopy results demonstrate self‐assembly into metal‐SCNPs (>70% imidazole‐units folded) by neutralization in the presence of Cu(II) in water to pH 4.6. Further neutralization induces self‐assembly of metal‐SCNPs (pH 4.6–5.0) and shrinkage (pH 5.0–5.6), with concurrent restraining residual imidazole motifs and hydrophilic segment, which organized into constant nanoparticles over pH 5.6–7.5. Atomic force microscopy results evidence discrete 1.2 nm nanoclusters and sub‐5‐nm subdomains in metal‐SCNP and assembled nanoparticle. Reduction of metal center using sodium ascorbate induces structural rearrangement to one order lower than the precursor. Enzyme mimic catalysis required media‐tunable discrete ultrafine interiors in metal‐SCNPs and assemblies have hence been achieved.     

Light-fueled dynamic covalent crosslinking of single polymer chains in non-equilibrium states

While polymer synthesis proceeds predominantly towards the thermodynamic minimum, living systems operate on the reverse principle – consuming fuel to maintain a non-equilibrium state. Herein, we report the controlled formation of 3D macromolecular architectures based on light-fueled covalent non-equilibrium chemistry. In the presence of green light (525 nm) and a bivalent triazolinedione (TAD) crosslinker, naphthalene-containing polymers can be folded into single chain nanoparticles (SCNPs). At ambient temperature, the cycloaddition product of TAD with naphthalene reverts and the SCNP unfolds into its linear parent polymer. The reported SCNP is the first example of a reversible light triggered folding of single polymer chains and can readily be repeated for several cycles. The folded state of the SCNP can either be preserved through a constant supply of light fuel, kinetic trapping or through a chemical modification that makes the folded state thermodynamically favored. Whereas small molecule bivalent TAD/naphthalene cycloaddition products largely degraded after 3 days in solution, even in the presence of fuel, the SCNP entities were found to remain intact, thereby indicating the light-fueled stabilization of the SCNP to be an inherent feature of the confined macromolecular environment.

Synthetic polymers consume green light as fuel for intramolecular crosslinking, yielding non-equilibrium single chain nanoparticles that can be light-stabilised, kinetically and chemically trapped, or else unfold in the absence of light fuel.     

具有光谱可调、高量子产率和稳定性的水溶性CdTe/Cd(OH)2核壳结构纳米粒子的可控水相合成

建立了一种简便的、以易得的无机盐为反应前体的水相法制备水溶性、高量子产率以及良好稳定性的CdTe/Cd(OH)2核壳结构量子点。本方法可以通过控制Cd(OH)2 壳层结构的厚度,使不同粒径量子点的荧光发射光谱由蓝绿色渐变到橙红色。利用透射电镜、X射线粉末衍射光谱、荧光光谱以及紫外可见光谱对该CdTe/Cd(OH)2核壳结构量子点进行了表征。CdTe/Cd(OH)2核壳结构量子点所具备的良好的水溶性可望应用于生物标记。本方法简便、反应条件温和并且容易操作,为无机金属化物包覆量子点提供了一种简便的途径。     

Gold‐loading magnetic core–shell organic/inorganic nanocomposites: facile preparation and multiple properties

Magnetic composite nanospheres (MCS) were first prepared via mini‐emulsion polymerization. Subsequently, the hybrid core–shell nanospheres were used as carriers to support gold nanoparticles. The as‐prepared gold‐loading magnetic composite nanospheres (Au‐MCS) had a hydrophobic core embed with γ‐Fe₃O₄ and a hydrophilic shell loaded by gold nanoparticles. Both the content of γ‐Fe₃O₄ and the size of gold nanoparticles could be controlled in our experiments, which resulted in fabricating various materials. On one hand, the Au‐MCS could be used as a T₂ contrast agent with a relaxivity coefficient of 362 mg^?1 ml S^?1 for magnetic resonance imaging. On the other hand, the Au‐MCS exhibited tunable optical‐absorption property over a wavelength range from 530 nm to 800 nm, which attributed to a secondary growth of gold nanoparticles. In addition, dynamic light scattering results of particle sizing and Zeta potential measurements revealed that Au‐MCS had a good stability in an aqueous solution, which would be helpful for further applications. Finally, it showed that the Au‐MCS were efficient catalysts for reductions of hydrophobic nitrobenzene and hydrophilic 4‐nitrophenol that could be reused by a magnetic separation process. Copyright © 2014 John Wiley & Sons, Ltd.     

CO2-Folded Single-Chain Nanoparticles as Recyclable,Improved Carboxylase Mimics

Emulating the function of natural carboxylases to convert CO₂ under atmospheric condition is a great challenge. Herein we report a class of CO₂-folded single-chain nanoparticles (SCNPs) that can function as recyclable, function-intensified carboxylase mimics. Lewis pair polymers containing bulky Lewis acidic and basic groups as the precursor, can bind CO₂ to drive an intramolecular folding into SCNPs, in which CO₂ as the folded nodes can form gas-bridged bonds. Such bridging linkages highly activate CO₂, which endows the SCNPs with extraordinary catalytic ability that can not only catalyze CO₂-insertion of C(sp³)-H for imitating the natural enzyme's function, it can also act on non-natural carboxylation pathways for C(sp² and sp)-H substrates. The nanocatalysts are of highly catalytic efficiency and recyclability, and can work at room temperature and near ambient CO₂ condition, inspiring a new approach to sustainable C₁ utilization.     

Preparation of monodisperse polystyrene/silver composite microspheres and their catalytic properties

This article presents a facile method for the preparation of polystyrene/silver (PS/Ag) composite microspheres. In this approach, monodisperse PS spheres were synthesized via dispersion polymerization and modified by sulfonation to obtain sulfonated PS spheres with sulfonic acid groups on the surfaces, and then adsorbed Sn²⁺ ions by electrostatic interaction and used as templates. PS/Ag composite microspheres were prepared successively by addition of [Ag(NH₃)₂]⁺ complex ions to the templates dispersion, adsorbing to the surfaces of templates, and then reduction of [Ag(NH₃)₂]⁺ complex ions to Ag nanoparticles by sodium potassium tartrate. The results showed that monodisperse PS spheres with sulfonic acid groups on the surfaces were coated by an incomplete and nonuniform coverage of Ag nanoparticles in the absence of Sn²⁺ ions. In the presence of Sn²⁺ ions, however, complete and uniform Ag nanoparticles coatings were obtained on the entire PS sphere. And the deposition density and size of Ag nanoparticles can be controlled by [Ag(NH₃)₂]⁺ concentration. The resulting PS/Ag composite microspheres were characterized by SEM, TEM, XRD, TGA, and UV-vis. Preliminary catalytical tests indicated these PS/Ag composite microspheres showed good catalytic properties.     

A Novel High Efficient Catalyst AgBr/CaMoO4 for the Reduction of p‐Nitrophenol

A new composite catalyst AgBr/CaMoO₄ was successfully fabricated by loading AgBr nanoparticles on CaMoO₄ support via a convenient precipitation/deposition method, without any controlling agent and template. The microstructure, chemical composition, and morphologies of the AgBr/CaMoO₄ were characterized by X‐ray diffraction, Fourier transform infrared, X‐ray photoelectron spectroscopy, and scanning electron microscopy. A series of comparative experiments showed that the composite AgBr/CaMoO₄ exhibits higher catalytic activity than pure AgBr or CaMoO₄ for the reduction of p‐nitrophenol (4‐NP). Moreover, the AgBr content greatly impacted the catalytic activity of composite AgBr/CaMoO₄ . The conversion rate of 4‐NP with AgBr/CaMoO₄ ‐5% as catalyst could reach 100% within only 4 min, which might be attributed to more number of available active sites from the highly dispersed AgBr nanoparticles on the surface of CaMoO₄ microspheres. In addition, the composite catalyst AgBr/CaMoO₄ displayed a good structural and cycling stability. The present study might provide a new strategy to design composite materials with excellent catalytic performance.     

Highly stable core-surface-crosslinked nanoparticles as cisplatin carriers for cancer chemotherapy

Cisplatin is a potent anticancer drug with low solubility in water. A new type of highly stable polymer micelles, namely core-surface-crosslinked nanoparticles (SCNPs) made from amphiphilic brush copolymers, were evaluated as the carrier of cisplatin. Cisplatin could be loaded in the SCNPs with poly(varepsilon-caprolactone) (PCL) cores and hydrophilic poly(ethylene glycol) (PEG) or poly[2-(N,N-dimethylamino)ethyl methacrylate] (PDMA) shells with high loading efficiency (approximately 90%). In vitro cellular uptake experiments indicated that both SCNPs could be easily taken up by SKOV-3 ovarian cancer cells. Both cell proliferation assay and IC50 measurements indicated that cisplatin encapsulated in the SCNPs had much enhanced cytotoxicity to the cancer cells compared to free cisplatin. The positive charges on the PCL/PDMA SCNPs promoted the cellular internalization of the nanoparticles, resulting in higher cytotoxicity of cisplatin in these SCNPs. The IC50 of the cisplatin encapsulated in PCL/PDMA SCNPs was as low as 0.01 microg/mL, lower than that of cisplatin in PCL/PEG SCNPs and free cisplatin.     

Flexible Magnetic Nanoparticles–Reduced Graphene Oxide Composite Membranes Formed by Self‐Assembly in Solution

A facile and robust route for the pre‐synthesized Fe₃O₄ nanoparticles (NPs) exclusively assembled on both sides of reduced graphene oxide (RGO) sheets with tunable density forming two‐dimensional NPs composite membranes is developed in solution. The assembly is driven by electrostatic attraction, and the nanocomposite sheets display considerable mechanical robustness, such as it can sustain supersonic and solvothermal treatments without NPs falling off, also, can freely float in solution and curl into a tube. The obtained two‐dimensional composite grain membranes exhibit superparamagnetic behavior at room temperature but responds astutely to an external magnetic field. In addition, these magnetic composite membranes show an enhanced absorption capability for microwaves. The grain sheets are attractive for biomedical, sensors, environmental applications and electric‐magnetic devices benefited from large surfaces, high magnetization moment, and superparamagnetic properties. The effective integration of oxide nanocrystals on RGO sheets provides a new way to design semiconductor–carbon nanocomposites for nanodevices or catalytic applications.     

Strongly Coupled Pt–Ni2GeO4 Hybrid Nanostructures as Potential Nanocatalysts for CO Oxidation

A facile and low‐cost method has been developed to successfully fabricate 3D flower‐like and sphere‐like Ni₂GeO₄ nanostructures with tunable sizes and shapes. It is found that the hard template, polymethyl methacrylate (PMMA) nanopsheres, is essential to the formation of the final products. The as‐prepared nanostructures can serve as an outstanding support for Pt nanoparticles after surface modification with L ‐lysine. In the catalytic test of CO oxidation, Pt–Ni₂GeO₄ nanoflowers exhibited much higher catalytic performance compared with Pt–Ni₂GeO₄ nanospheres, representing a typical size‐dependent catalytic property.     

Platinum(II)‐Crosslinked Single‐Chain Nanoparticles: An Approach towards Recyclable Homogeneous Catalysts

We introduce the synthesis and in‐depth characterization of platinum(II)‐crosslinked single‐chain nanoparticles (Pt^II‐SCNPs) to demonstrate their application as a recyclable homogeneous catalyst. Specifically, a linear precursor copolymer of styrene and 4‐(diphenylphosphino)styrene was synthesized via nitroxide‐mediated polymerization. The triarylphosphine ligand moieties along the backbone allowed for the intramolecular crosslinking of single chains via the addition of [Pt(1,5‐cyclooctadiene)Cl₂] in dilute solution. The successful formation of well‐defined Pt^II‐SCNPs was evidenced by size exclusion chromatography, dynamic light scattering, nuclear magnetic resonance (¹H, ³¹P{¹H}, ¹⁹⁵Pt), and diffusion‐ordered spectroscopy. Finally, the activity of the Pt^II‐SCNPs as homogeneous, yet recyclable catalyst was successfully demonstrated using the example of the amination of allyl alcohol.     

Facile deposition of gold nanoparticles on core–shell Fe3O4@polydopamine as recyclable nanocatalyst

A simple and green method for the controllable synthesis of core–shell Fe₃O₄ polydopamine nanoparticles (Fe₃O₄@PDA NPs) with tunable shell thickness and their application as a recyclable nanocatalyst support is presented. Magnetite Fe₃O₄ NPs formed in a one-pot process by the hydrothermal approach with a diameter of ∼240 nm were coated with a polydopamine shell layer with a tunable thickness of 15–45 nm. The facile deposition of Au NPs atop Fe₃O₄@PDA NPs was achieved by utilizing PDA as both the reducing agent and the coupling agent. The satellite nanocatalysts exhibited high catalytic performance for the reduction of p-nitrophenol. Furthermore, the recovery and reuse of the catalyst was demonstrated 8 times without detectible loss in activity. The synergistic combination of unique features of PDA and magnetic nanoparticles establishes these core–shell NPs as a versatile platform for potential applications.     

Low Temperature Synthesis of Mn3O4 Nanoparticles Using Starch as Capping Agent

In this communication, manganese oxide (Mn₃O₄) nanoparticles were prepared by a facile solution method using starch as capping agent. The nanoparticles were characterized by means of X‐ray diffraction (XRD) and AFM. The results showed that the Mn₃O₄ nanoparticles were single phase, spherical, and uniformly dispersive. The average particle size was evaluated to be approximately 35 nm.     

Preparation of Ni/TiO2 Nanoparticles and Their Catalytic Performance on the Thermal Decomposition of Ammonium Perchlorate

Metal/oxide nanoparticles are attractive because of their special structure and better properties. The Ni/TiO₂ nanoparticles were prepared by a liquid phase chemical reduction method in this paper. The obtained‐products were characterized by inductively coupled plasma (ICP), X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM). The results show that Ni particles in Ni/TiO₂ nanoparticles exhibit better dispersion and the size of most Ni particles is 10 nm or so. The catalytic activity of Ni/TiO₂ nanoparticles on the thermal decomposition of ammonium perchlorate (AP) was investigated by simultaneous thermogravimetry and differential thermal analysis (TG‐DTA). Results show that composite process of Ni and TiO₂ can improve the catalytic activity of Ni nanoparticles on the thermal decomposition of AP, which is mainly attributed to the improvement of Ni dispersion in Ni/TiO₂ nanoparticles. The catalytic activity of Ni/TiO₂ nanoparticles increases with increasing the weight ratio of Ni to AP.     

The influence of nanostructured UV‐blockers on mechanical properties of carbon fiber epoxy composites during accelerated weathering condition

In a 3‐stage experimental approach, it was attempted to enhance the weathering performance of carbon fiber reinforced epoxy composites (CFRC). For this purpose, 2 types of UV‐blocking nanoparticles titanium dioxide (TiO₂) and zinc oxide (ZnO) were employed to separately be introduced into the composite matrix. In the first stage, the optimum content of nanoparticles was found to be 0.5 wt.% for both nanoparticles. The second stage of experiments revealed that addition of nanoparticles into CFRC could increase the strength of the composite around 6% to 12% depending on the nanoparticles used. In the third stage (weathering), it was demonstrated that nanoparticles significantly enhanced the weathering stability of CFRC. Finally, it was concluded that while TiO₂ could reinforce the composite more efficiently, ZnO nanoparticles provided a higher level of protection (62% improvement in weathering stability compared with neat composite). The higher protection efficiency of ZnO compared with TiO₂ was explained by its lower photocatalytic activity during weathering.     

负载金纳米粒子的聚苯乙烯/聚丙烯酸微球的合成及pH响应性能

以两步聚合法合成的聚苯乙烯(PS)/聚丙烯酸(PAA)核-壳结构复合微凝胶为载体, 硼氢化钠为还原剂, 柠檬酸钠为稳定剂, 通过原位控制性还原获得pH敏感性微凝胶负载纳米金粒子的PS/PAA-Au复合材料. 研究发现, 不同酸碱条件时, 复合微凝胶壳层高分子链的溶胀/收缩变化, 不仅可以调节纳米金粒子的表面等离子吸收, 还可以调节反应底物的扩散传质, 即借助载体微环境的变化来调控纳米金光学性能和催化性能, 从而实现复合纳米金材料的pH调控性.     

Study on CaCO3/PMMA nanocomposite microspheres by soapless emulsion polymerization

A soapless emulsion polymerization method was applied to synthesize CaCO₃/PMMA spherical composite with different loading of CaCO₃. CaCO₃ nanoparticles were pretreated with oleic acid after the carbonation process of Ca(OH)₂ slurry by CO₂, in order to improve the compatibility between the CaCO₃ particles and MMA monomer in emulsion system. The results of photon correlation spectroscopy (PCS) showed the particles size of composites were bigger than the pure PMMA. And the size increased with the increase of the content of CaCO₃ nanoparticles. TEM images showed that the morphology of the composite microspheres was uniform and CaCO₃ nanoparticles can be well encapsulated in the polymeric microsphere, and were located at the edge of the spheres. The results of DTG and TG indicated that the CaCO₃ nanoparticles could improve the thermal stability of PMMA. Moreover, capsulation of CaCO₃ by PMMA can increase the acid-resistant of CaCO₃ nanofillers.     

Controllable synthesis and catalysis application of hierarchical PS/Au core-shell nanocomposites

Polystyrene (PS)/gold (Au) core-shell nanocomposites with tunable size, high stability, and excellent catalytic activity have been synthesized by a facile method that combines the ionic self-assembly with the in situ reduction. The composition and stoichiometry, as well as its morphology and optical properties of these nanocomposites have been examined and verified by various characterization techniques. The size and the coverage of gold nanoparticles (NPs) can be simply tailored by changing the amount of 3-aminopropyltrimethoxysilane (APTES), the functionalization time, the protonation time, and the amount of chloroauric acid (HAuCl₄). The continuous red shifts of the localized surface plasmon resonance absorption of the Au NPs on the PS spheres are observed. Importantly, the obtained Au NPs with controllable and uniform size on the surfaces of amino-functionalized PS spheres exhibit excellent size-dependent catalytic properties for the reduction of 4-nitrophenol (4-NP) by NaBH₄.