Recent progress on pure organic room temperature phosphorescence materials based on host-guest interactions

The inclusion of specific organic phosphorescent guest molecules by the host molecules can reduce the nonradiative transitions and engender room temperature phosphorescence emission.     

Recent progress on pure organic room temperature phosphorescence materials based on host-guest interactions

Pure organic room temperature phosphorescence (RTP) has been attracting a lot interest recently. So far, many strategies have succeeded in achieving efficient organic RTP materials by increasing the rate of intersystem crossing (ISC) and suppressing non-radiative transitions. In supramolecular chemistry, the control and regulation of molecular recognition based on the role of the host and guest in supramolecular polymers matrix, has attracted much attention. Recently, researchers have successfully achieved room temperature phosphorescence of pure organic complexes through host-guest interactions. The host molecule specifically includes the phosphorescent guest to reduce non-radiative transitions and enhance room temperature phosphorescence emission. This review aims to describe the developments and achievements of pure organic room temperature phosphorescence systems through the mechanism of host-guest interactions in recent years, and demonstrates the exploration and pursuit of phosphorescent materials of researchers in different fields.     

Achieving room temperature phosphorescence from organic small molecules on amino acid skeleton

Room temperature phosphorescence (RTP) generated by small molecules has attracted great attention due to their unique potentials for biosensor, bioimaging and security protection. While, the design of RTP materials is extremely challenging for organic small molecules in non-crystalline solid state. Herein, we report a new strategy for achieving non-crystalline organic small molecules with RTP emission by modifying different phosphors onto diphenylalanine or phenylalanine derivatives. Benefiting from the skeletal structure of the amino acid derivatives, there are intermolecular hydrogen bond formation and rigidification effect, thereby minimizing the intermolecular motions and enhancing their RTP performance     

Achieving room temperature phosphorescence from organic small molecules on amino acid skeleton

Room temperature phosphorescence (RTP) generated by small molecules has attracted great attention due to their unique potentials for biosensor, bioimaging and security protection. While, the design of RTP materials is extremely challenging for organic small molecules in non-crystalline solid state. Herein, we report a new strategy for achieving non-crystalline organic small molecules with RTP emission by modifying different phosphors onto diphenylalanine or phenylalanine derivatives. Benefiting from the skeletal structure of the amino acid derivatives, there are intermolecular hydrogen bond formation and rigidification effect, thereby minimizing the intermolecular motions and enhancing their RTP performance     

Effect of small organic molecules on room temperature phosphorescence properties of naphthol ternary inclusion complexes in β-cyclodextrin

The influence of nine small organic molecules on the phosphorescence properties of β-cyclodextrin (β-CD)/1-naphthol/1,2-dibromoethane (DBE) and β-CD/2-naphthol/DBE ternary inclusion complexes are examined by means of room temperature phosphorescence (RTP) measurements. It was demonstrated that the rigidity of β-CD/naphthol inclusion complex, RTP intensity and lifetime could be enhanced when different small organic molecules (less than 1% v/v) were added respectively; the analytical characters of two kinds of naphthols in host-guest stabilized-RTP were improved. The linear range of 1-naphthol become broad in the presence of n-propanol, methanol, ethanol or 2-propanol and its detection limit was reduced from 4×10⁻⁶ to 7.5×10⁻⁸ mol l⁻¹ in the presence of 0.6% (v/v) methanol. Likewise, for 2-naphthol, the detection limit was reduced from 2.0×10⁻⁶ to 2.8×10⁻⁷ mol l⁻¹ and to 8.1×10⁻⁷ mol l⁻¹ after 0.5% (v/v) glycol and 0.2% (v/v) 2-propanol being added, respectively.     

Room temperature phosphorescence decay of metal chelates in micellar media

The characteristics of the decay of the triplet state of metal chelates have been investigated in micellar media using room temperature phosphorescence (RTP) measurements of the Al-ferron (7-iodo-8-hydroxyquinoline-5-sulfonic acid) complex in cetyltrimethylammonium bromide (CTAB) micelles. Applications of such decay measurements include discrimination between metal complex species and evaluation of the stoichiometry of phosphorescent metal chelates. A thorough study of the effect of foreign ions (interferences) on the photochemical characteristics of RTP of the aluminum complex leads to a tentative classification of foreign cations. Results are compared with those for the Nb(V)-ferron phosphorescent complex in CTAB micelles and possible reaction mechanisms in the presence of micellar media are outlined in an effort to contribute to basic knowledge of micelle stabilized RTP of such inorganic ions.     

Tubular polypyrrole synthesized by in situ doping polymerization in the presence of organic function acids as dopants

Tubular polypyrrole (PPy) could be synthesized by in situ doping polymerization in the presence of β‐naphthalene sulfonic acid (NSA) as dopant. The resultant tubular PPy–NSA not only exhibits high room temperature conductivity (ς_RT = 10 S/cm) but is also soluble in m‐cresol. The molecular structure of PPy–NSA is identical to the characteristic structure of PPy synthesized by a conventional method. It has been demonstrated that NSA dopant with large molecular size and plate–lebe structure is a key factor to control formation of tubular PPy–NSA. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1443–1449, 1999     

Crystallization-induced phosphorescence of pure organic luminogens

This review summarizes the recent progress of efficient room temperature phosphorescence (RTP) from pure organic luminogens achieved by crystallization-induced phosphorescence (CIP), with focus on the advances in our group. Besides homocrystals, mixed crystals and cocrystals are also discussed. Meanwhile, intriguing RTP emission from the luminogens without conventional chromophores is demonstrated.     

Room-temperature phosphorescence from purely organic materials

Room-temperature phosphorescence (RTP) materials have attracted great attention due to their involvement of excited triplet states and comparatively long decay lifetimes. In this short review, recent progress on enhancement of RTP from purely organic materials is summarized. According to the mechanism of phosphorescence emission, two principles are discussed to construct efficient RTP materials: one is promoting intersystem crossing (ISC) efficiency by using aromatic carbonyl, heavyatom, or/and heterocycle/heteroatom containing compounds; the other is suppressing intramolecular motion and intermolecular collision which can quench excited triplet states, including embedding phosphors into polymers and packing them tightly in crystals. With aforementioned strategies, RTP from purely organic materials was achieved both in fluid and rigid media.     

Stopped-flow determination of dipyridamole in pharmaceutical preparations by micellar-stabilized room temperature phosphorescence

The stopped flow mixing technique has been used to study the kinetic determination of dipyridamole by means of micellar-stabilized room temperature phosphorescence (RTP). This mixing system diminishes the time required for the deoxygenation of the micellar medium by sodium sulfite. The phosphorescence enhancers thallium (I) nitrate, sodium dodecyl sulfate (SDS), and sodium sulfite were optimized to obtain maximum sensitivity and selectivity. A pH value of 10.6 was selected as adequate for phosphorescence development. The kinetic curve of dipyridamole phosphorescence was scanned at λ_ex=303 nm and λ_em=616 nm. Then, the intensity at 10 s, and the maximum slope of phosphorescence development, for an interval time of 1 s, were measured. Two determination approaches: intensity and rate methods, were proposed. The calibration graphs were linear for the concentration range from 50 to 400 ng ml⁻¹. The detection limits, according to Clayton et al., Anal. Chem. 59 (1987) 2506, were 21.5 and 37.5 ng ml⁻¹, for intensity and initial rate measurements, respectively. By applying the error propagation theory, the detection limits were 19.0 and 33.0 ng ml⁻¹, for intensity and initial rate measurements, respectively. Two commercial formulations (persantin and asasantin) were analyzed by both proposed methodologies. Adequate recovery values were obtained in both cases.     

Direct screening of tetracyclines in water and bovine milk using room temperature phosphorescence detection

A fast and simple flow-through optosensor was designed and characterized for the direct screening of four tetracycline (TCC) antibiotics (tetracycline, oxytetracycline, chlortetracycline and doxycycline) in water and bovine milk samples. The proposed optosensor provides rapid binary yes/no overall responses, being appropriate for the screening of this family of antibiotics above or below a pre-set concentration threshold.The experimental set-up is based on a flow-injection manifold coupled on-line to a phosphorescence detector. Aliquots of the samples are pretreated with Eu(III) to form room temperature phosphorescent metal chelates and injected in the flow manifold. Those chelates are then on-line retained on a conventional flow-cell (packed with polymeric Amberlite XAD-4 particles) which is placed inside the cell holder of the phosphorimeter. After the emission is registered, the antibiotic-metal complexes are eluted from the packed resin with 1 M HCl (for milk samples a second regeneration step, using methanol, should be performed). A sample throughput of about 20 samples per hour was obtained. Optimum experimental conditions include a pH 9, a Eu(III) concentration of 2 × 10⁻⁴ M and 8 mM sodium sulphite as chemical deoxygenant. The phosphorescence emitted by the europium-TCC complexes was measured at 394 and 617 nm for excitation and emission wavelengths, respectively.The unreliability region, given by the probability of false positives and false negatives, respectively (set at 5% in both cases) was in the range between 0.2 and 11.6 nМ for detection of tetracyclines in water samples (at a cut-off level of 4 nM) and in the range between 165 and 238 nM for detection of tetracyclines in milk (cut-off level fixed at the normative EU level of 200 nM). Finally, the applicability of the proposed screening optosensor was tested for the reliable control of tetracyclines in contaminated and uncontaminated water and milk samples.     

Metal nanoparticle-enhanced room temperature phosphorescence of diiodofluorescein on the filter paper substrate

<正>Metal-enhanced room temperature phosphorescence of diiodofluorescein was first observed on filter paper surface.The phosphorescence intensity is 2.5-fold brighter from diiodofluorescein on silver nanoparticles-deposited filter paper as compared with an identical control sample without silver nanoparticles.Furthermore,enhanced absorption was also observed for the same system.Our findings suggest that both singlet and triplet states can couple to surface plasmons and enhance phosphorescence quantum yields at room temperature,as well as to increase the excitation rate of lumophores at room temperature.     

非离子表面活性剂Tween-20胶束体系流体室温燐光法测定色氨酸

提出了一种以非离子表面活性剂Tween 2 0为胶束介质、I-作重原子微扰剂、Na2 SO3 为除氧剂的胶束增稳室温光测定色氨酸的方法。详细研究了各种实验条件的影响。线性范围 8.0× 1 0 -8～ 8.0× 1 0 -6mol L ,检出限达 1 .4×1 0 -9mol L。直接用于大米、花生、大豆及竹笋中色氨酸的测定 ,相对标准偏差2 4%～ 3.3% ,与荧光法比较 ,相对误差 - 3.1 %～ 4.2 %。     

Polyaniline doped with different sulfonic acids by in situ doping polymerization

Doped polyaniline (PANI) was synthesized by an “in situ doping polymerization” method in the presence of different sulfonic acids, such as methanesulfonic acid (MSA), p‐methylbenzene sulfonic acid (MBSA), β‐naphthalenesulfonic acid (β‐NSA), α‐naphthalenesulfonic acid (α‐NSA), 1,5‐naphthalenedisulfonic acid (1,5‐NSA), and 2,4‐dinitronaphol‐7‐sulfonate acid (NONSA). Morphology, solubility in m‐cresol, and electrical properties of the doped PANI were measured with the variation of the molecular structure of the selected sulfonic acids. Granular morphology was obtained when the sulfonic acids without a naphthalene ring, such as MSA and MBSA, were used. Regular tubular morphology was obtained only when β‐NSA was used. The tubular morphology can be modified by changing the substitutes, the number, and location of sulfo‐group(SOH) on the naphthalene ring. These results indicated that naphthalene ring in the selected sulfonic acids plays an important role in forming the tubular morphology of the doped PANI by the “in situ doping polymerization” method. All resulting PANI salts were soluble in m‐cresol, with the solubility depending on the molecular structure of the selected dopants. Room‐temperature conductivity for the doped PANI ranges from 10⁻¹ to 10⁰S/cm. Temperature dependence of conductivity shows a semiconductor behavior, and it can be expressed by one dimenson Variable Range Hopping (VRH) model. 1 © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1277–1284, 1999     

In situ polymerization and reduction to fabricate gold nanoparticle‐incorporated polyaniline as supercapacitor electrode materials

Nanocomposites of gold nanoparticles and polyaniline are synthesized by using HAuCl₄ and ammonium peroxydisulfate as the co‐oxidant involving in situ polymerization of aniline and in situ reduction of HAuCl₄. Through these in situ methods, the synthesized Au nanoparticles of ca. 20 nm embedded tightly and dispersed uniformly in polyaniline backbone. With the Au content in composite increasing from 4.20 to 24.72 wt.%, the specific capacitance of the materials first increased from 334 to 392 F g⁻¹ and then decreased to 298 F g⁻¹. Based on the real content of PANI in composite material, the highest specific capacitance is calculated to be 485 F g⁻¹ at the Au amount of 19.15 wt.%, which remains 55.6% after 5000 cycles at the current density of 2 A g⁻¹. Finally, the asymmetric supercapacitor of AuNP/PANI||AC and the symmetric supercapacitor of AuNP/PANI||AuNP/PANI are assembled. The asymmetric supercapacitor device shows a better electrochemical performance, which delivers the maximum energy density of 7.71 Wh kg⁻¹ with power density of 125 W kg⁻¹ and maximum power density of 2500 W kg⁻¹ with the energy density of 5.35 Wh kg⁻¹.     

Polyethylene/graphite nanocomposites obtained by in situ polymerization

The synthesis of polyethylene/graphite nanocomposites by in situ polymerization was achieved using the catalytic system Cp₂ZrCl₂ (bis(cyclopentadienyl)zirconium(IV) dichloride)/methylaluminoxane (MAO). Graphite with nano dimensions, previously treated with MAO, was added into the reactor as filler at percentages of 1, 2, and 5% (w/w). XRD analysis showed that the chemical and thermal treatments employed preserve the structure of the graphite sheets. The formation of graphite nanosheets and nanocomposites was confirmed by TEM and AFM. TEM micrographics showed that the polyethylene grew between the graphene nanosheets, giving intercalated and exfoliated graphite nanocomposites. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 692–698, 2010     

Cucurbit[n]urils-induced room temperature phosphorescence of quinoline derivatives

The cucurbit[7,8]urils (Q[7] and Q[8])-induced room temperature phosphorescence (RTP) of quinoline and its derivatives were firstly found in the cucurbit[n]urils chemistry. The luminophores (quinolines) and their RTP are affected by the concentration of different Q[n]s, heavy metal ions and amounts, and pH. The RTP lifetime of the luminophore has been investigated. In presence of Na₂SO₃, the cation Tl⁺ led to stronger Q[n]-induced RTP, while the RTP lifetimes of luminophore/Q[7 or 8]/KI were generally longer than that of luminophore/Q[7 or 8]/TlNO₃, the RTP lifetimes of these systems were between 0.18 and 47.4 ms. Contrary to the stable 1:2 Q[8]:guest ternary inclusion complexes at lower pHs, as suggested by ¹H NMR, electronic absorption and fluorescence spectroscopy, low Q[8]-induced room temperature phosphorescence was observed. However, at higher pHs, high intensity of cucurbit[n]urils-induced room temperature phosphorescence of these quinoline derivatives were observed, and a 1:1 Q[8]:guest inclusion complex was formed. Investigations of dependence of RTP intensity on concentration of Q[n] revealed that the highest intensity of the Q[n]-induced RTP was observed at a low mole ratio of host:guest, which is closed to 1:1. It was presumably resulted from the strong interaction of Q[n] and these guests due to the combined hydrophobic cavity interaction and the hydrophilic portal interaction of the cucurbit[n]urils with the nitrogen heterocycles guest.     

Preparation and characterization of polymer/silica nanocomposites via double in situ miniemulsion polymerization

Polymer/SiO₂ nanocomposite microspheres were prepared by double in situ miniemulsion polymerization in the presence of methyl methacrylate, butyl acrylate, γ‐methacryloxy(propyl) trimethoxysilane, and tetraethoxysilane (TEOS). By taking full advantage of phase separation between the growing polymer particles and TEOS, inorganic/polymer microspheres were fabricated successfully in a one‐step process with the formation of SiO₂ particles and the polymerization of organic monomers taking place simultaneously. The morphology of nanocomposite microspheres and the microstructure, mechanical properties, thermal properties, and optical properties of the nanocomposite films were characterized and discussed. The results showed that hybrid microspheres had a raspberry‐like structure with silica nanoparticles on the shells of polymer. The silica particles of about 20 nm were highly dispersed within the nanocomposite films without aggregations. The transmittance of nanocomposite film was comparable to that of the copolymer film at around 70–80% from 400 to 800 nm. The mechanical properties and the fire‐retardant behavior of the polymer matrix were improved by the incorporation of silica nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3128–3134, 2010     

荧光/磷光混合型白光有机发光二极管的研究

白光有机发光二极管（white organic light-emitting diodes,WOLEDs）在全色显示、固态照明以及背光源等领域有巨大的应用前景,其研究备受关注.其中,荧光/磷光混合型WOLEDs因兼具荧光材料的长寿命和磷光材料的高效率,被认为是目前最有希望实现照明应用的器件结构.荧光/磷光混合型WOLEDs最重要的问题是要解决荧光材料的单线态激子和磷光材料的三线态激子的协同发光.为了避免单线态激子和三线态激子的相互猝灭问题,必须设计有效的器件结构.本文以两种不同三线态能级的蓝光荧光材料为研究对象,介绍了不同高性能荧光/磷光混合型WOLEDs的结构设计与性能.研究表明,载流子传输平衡的高效结构设计和激子分布宽范围内的有效调控是实现高性能荧光/磷光混合型WOLEDs的关键.     

Concurrent genesis of color and electrical conductivity in leathers through in‐situ polymerization of aniline for smart product applications

We present a simple method to produce self‐colored and conducting leathers using in‐situ polymerization of aniline with ammonium persulfate as oxidant and hydrochloric acid as dopant. The structural and morphological features of treated leathers were examined using Fourier transformed infra‐red spectroscopy, X‐ray diffraction and scanning electron microscopic analyses. Results suggest the deposition of conducting emeraldine salt form of polyaniline on the leather substrate rather than other poorly conducting states. We also show that the treated leathers are bluish green through reflectance measurements thereby suggesting that the use of toxic and expensive dyes can be avoided for coloration process. Further, we demonstrate that a maximum electrical conductivity of 0.15 S/cm is obtained for the leather treated with optimal experimental conditions, which aids its application to operate touch‐screen devices. Copyright © 2015 John Wiley & Sons, Ltd.