Membrane formation and structure development by dry-cast process

The various types of porous membranes were prepared by dry-cast process in several cellulose acetate/acetone/nonsolvent systems. The nonsolvents used were 2-methyl-2,4-pentanediol, hexanol and octanol. Because of the high boiling points of the nonsolvents used in this work, only the solvent (acetone) evaporated during the membrane formation. The effects of the nonsolvent weight fraction in the cast solution, the polymer weight fraction, membrane thickness and kinds of the nonsolvents on the membrane structures were studied. As the nonsolvent weight fraction increased, the membrane morphology changed in the order of entirely dense, asymmetric and entirely porous structures. The increase in the polymer weight fraction and the decrease in the membrane thickness suppressed the asymmetric structures. These kinds of nonsolvents significantly influenced the membrane morphology.In order to understand the change of the obtained membrane structures, the phase diagrams for ternary systems were clarified experimentally and theoretically. Moreover, the mass transfer process was analyzed and the changes in the polymer volume fractions during the membrane formation were simulated. Based on both these thermodynamic and kinetic properties, the membrane structures obtained were discussed in detail. The asymmetrc structures obtained in this work were found to be attributable to the kinetic difference in the increase rates of the polymer fractions across the binodal line.     

Transport of organic vapors through poly(1-trimethylsilyl-1-propyne)

Poly(1-trimethylsilyl-1-propyne) [PTMSP], a high-free-volume glassy polymer, has the highest gas permeability of any known synthetic polymer. In contrast to conventional, low-free-volume, glassy polymers, PTMSP is more permeable to large, condensable organic vapors than to permanent gases. The organic-vapor/permanent-gas selectivity of PTMSP based on pure gas measurements is low. In organic-vapor/permanent-gas mixtures, however, the selectivity of PTMSP is much higher because the permeability of the permanent gas is reduced dramatically by the presence of the organic vapor. For example, in n-butane/methane mixtures, as little as 2 mol% n-butane (relative n-butane pressure 0.16) lowers the methane permeability 10-fold from the pure methane permeability. The result is that PTMSP shows a mixed-gas n-butane/methane selectivity of 30. This selectivity is the highest ever observed for this mixture and is completely unexpected for a glassy polymer. In addition, the gas mixture n-butane permeability of PTMSP is considerably higher than that of any known polymer, including polydimethylsiloxane, the most vapor-permeable rubber known. PTMSP also shows high mixed-gas selectivities and vapor permeabilities for the separation of chlorofluorocarbons from nitrogen. The unusual vapor permeation properties of PTMSP result from its very high free volume - more than 20% of the total volume of the material. The free volume elements appear to be connected, forming the equivalent of a finely microporous material. The large amount of condensable organic vapor sorbed into this finely porous structure causes partial blocking of the small free-volume elements, reducing the permeabilities of the noncondensable permanent gases from their pure gas values.     

Morphology of microporous poly(vinylidene fluoride) membranes studied by gas permeation and scanning electron microscopy

Microporous poly(vinylidene fluoride) (PVDF) membranes with asymmetric pore structure were prepared by a wet phase inversion process. The polymer was precipitated from a casting solution when immersed in a cold water (gelation) bath. The casting solution was, in most cases, composed of polymer, solvent, and nonsolvent. In this solvent-nonsolvent system, the solvents used were triethylphosphate (TEP) and dimethylsulfoxide (DMSO), and the nonsolvents used were glycerol and ethanol. Mean pore sizes and effective porosity of the microporous membranes were calculated using the gas permeation method. They were studied as a function of evaporation time of wet nascent film, polymer molecular weight, concentration of polymer, and concentration of nonsolvent. The morphology of the membranes was examined by scanning electron microscopy (SEM).     

Polymer characterization and gas permeability of poly(1-trimethylsilyl-1-propyne) [PTMSP], poly(1-phenyl-1-propyne) [PPP], and PTMSP/PPP blends

Pure gas and hydrocarbon vapor transport properties of blends of two glassy, polyacetylene-based polymers, poly(1-trimethylsilyl-1-propyne) [PTMSP] and poly(1-phenyl-1-propyne) [PPP], have been determined. Solid-state CP/MAS NMR proton rotating frame relaxation times were determined in the pure polymers and the blends. NMR studies show that PTMSP and PPP form strongly phase-separated blends. The permeabilities of the pure polymers and each blend were determined with hydrogen, nitrogen, oxygen, carbon dioxide, and n-butane. PTMSP exhibits unusual gas and vapor transport properties which result from its extremely high free volume. PTMSP is more permeable to large organic vapors, such as n-butane, than to small, permanent gases, such as hydrogen. PPP exhibits gas permeation characteristics of conventional low free volume glassy polymers; PPP is more permeable to hydrogen than to n-butane. In PTMSP/PPP blends, both n-butane permeability and n-butane/hydrogen selectivity increase as the PTMSP content of the blends increases. © 1996 John Wiley & Sons, Inc.     

Impact of thermal ageing on sorption and diffusion properties of PTMSP

Gas and vapour permeability in both freshly cast and aged poly(1-trimethylsilyl-1-propyne) (PTMSP) membranes were investigated in terms of solubility and diffusion coefficients for two probe molecules, a permanent gas (nitrogen) and an organic vapour (dichloromethane). To get reliable data for this study, we set up a fast and reproducible ageing procedure consisting of thermal treatment of the polymer films (100 °C during 24 h under vacuum). As expected, measurements recorded from time-lag experiments and isothermal sorption showed strong variations of the PTMSP transport properties before and after the thermal ageing procedure. Freshly cast membranes exhibited high permeability, whereas after ageing a 40–45% decrease of the permeability was recorded for both probes. The results demonstrated that only the glassy physical microstructure of PTMSP was affected by the ageing procedure, while the chemical structure was unchanged. Based on a dual-mode model for sorption and a Long's model for diffusion, the analysis of the data showed that the solubility and diffusion coefficients of the gas and the vapour were not affected in the same way. For nitrogen, only the diffusion coefficient decreased, whereas for dichloromethane, the thermal treatment mainly influenced the sorption coefficient. The lower permeability due to the combination of sorption and diffusion parameters could be attributed to a change of the PTMSP hole geometry or the hole connections.     

Crosslinking poly[1-(trimethylsilyl)-1-propyne] and its effect on physical stability

Poly[1-(trimethylsilyl)-1-propyne] (PTMSP) has been crosslinked using 3,3′-diazidodiphenylsulfone to improve its solvent resistance and physical stability. This study reports the influence of crosslinking on N₂, O₂ and CH₄ gas permeabilities and fractional free volume (FFV) as a function of time. Crosslinking PTMSP renders it insoluble even in excellent solvents for the uncrosslinked polymer. The gas permeability and FFV of uncrosslinked and crosslinked PTMSP decreased over time, so crosslinking PTMSP does not arrest physical aging. The addition of 10 wt.% polysiloxysilsesquioxanes (POSS) nanoparticles decreased the permeability of PTMSP by 55%, and the permeability and FFV values were stable over time for PTMSP films containing 10 wt.% POSS nanoparticles. The permeability of PTMSP at a given FFV was greater than that of other substituted polyacetylenes, polysulfones or polycarbonates, which is consistent with differences in the arrangement of free volume in these polymers, as probed by positron annihilation lifetime spectroscopy (PALS). Ellipsometry was used to characterize physical aging of thin (400 nm) uncrosslinked and crosslinked PTMSP films supported on silicon wafers. The ellipsometry results showed that crosslinking does not markedly slow physical aging of thin PTMSP films.     

Long-term permeation properties of poly(1-trimethylsilyl-1-propyne) membranes in hydrocarbon—Vapor environment

Poly(1-trimethylsilyl-1-propyne) (PTMSP), a high free-volume glassy di-substituted polyacetylene, has the highest gas permeabilities of all known polymers. The high gas permeabilities in PTMSP result from its very high excess free volume and connectivity of free volume elements. Permeability coefficients of permanent gases in PTMSP decrease dramatically over time due to loss of excess free volume. The effects of aging on gas permeability and selectivity of PTMSP membranes continuously exposed to a 2 mol % n-butane/98 mol % hydrogen mixture over a period of 47 days are reported. The permeation properties of PTMSP membranes are quite stable when the polymer is continuously exposed to a gas mixture containing a highly sorbing organic vapor such af n-butane. The n-butane/hydrogen selectivity was essentially constant for the 47-day test period at a value of 29, or 88% of the initial value of the as-cast film of 33. Condensable gases such as n-butane may serve as a “filler” in the nonequilibrium free volume of the polymer, thereby preserving the high level of excess free volume. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1483–1490, 1997     

Sorption of methanol,dimethyl carbonate,methyl acetate,and acetone vapors in CTA and PTMSP: General findings from the GAB Analysis

Sorption of vapors of four organic compounds in two glassy polymers, cellulose triacetate (CTA) and poly[(trimethylsilyl)propyne] (PTMSP), has been reported and analyzed in terms of Guggenheim‐Anderson‐De Boer (GAB) model. These two structurally and physicochemically different glassy polymers both independently showed that one sorption site was formed by about three monomeric units. This finding held true for vapors of all characterized compounds; that is, for methanol, for its derivatives dimethyl carbonate and methyl acetate, and for acetone. The “rule of three” might thus also be applicable to other sorbates and glassy polymers. Further, an original modification of the GAB model for the sorption of alcohols in PTMSP was derived and successfully tested. Overall, the analyses of the sorption isotherms, heats of sorption and diffusion coefficients supported the view that the sorption of vapors in glassy polymers has adsorptive nature. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 561–569     

Investigations on the peculiar permeation properties of volatile organic compounds and permanent gases through PTMSP

In contrast to common glassy polymers, poly(1-trimethylsilyl-1-propyne) (PTMSP), a high free volume glassy polymer, shows a preferable permeation of large condensable organic vapors in comparison to permanent gases. In order to investigate this phenomenon, a systematic permeability study over a large activity range has been performed on PTMSP with three types of volatile organic compounds (VOCs) as diffusing probes: toluene, dimethylketone and dichloromethane. PTMSP was synthesized with different catalytic systems (Nb or Ta based) able to induce controlled sub-molecular cis–trans structures. Whereas dimethylketone and dichloromethane permeability can be correctly described by a classical dual-mode equation, a peculiar bell shaped pattern was obtained for toluene, with a minimum permeability located at an activity value around a=0.3–0.4. In that case, only a dual-mode expression taking into account a concentration dependent diffusion coefficient can account for the results.

On the other hand some apparent conflicting data recorded from PTMSP brand new films were related to the microstructure of the polymer main chain thanks to ¹³C NMR spectroscopy analysis showing importance of cis- and trans-forms of the main chain of PTMSP. cis-Structure is more flexible and can be responsible for the creation of a higher density physical network (HDN) in polymeric matrix; conversely, trans-structure is more rigid and can provide lower density physical network (LDN). The higher permeability recorded for several probes through PTMSP synthesized with TaCl₅/Al(i-Bu)₃ catalytic system compared to those of NbCl₅ based polymer can be explained by the geometric difference of the macromolecule networks.     

Molecular simulations of physical aging in polymer membrane materials

Poly(1-trimethylsilyl-1-propyne) (PTMSP), the most permeable polymer known, undergoes rapid physical aging. The permeability of PTMSP to gases and vapors decreases dramatically with physical aging. Cavity size (free volume) distributions were calculated in as-cast and aged PTMSP, using an energetic based cavity-sizing algorithm. The large cavities found in as-cast PTMSP disappear in aged PTMSP, which is consistent with the positron annihilation lifetime spectroscopy (PALS) measurements. We also characterized the connectivity of cavities in both as-cast and aged PTMSP membranes. Cavities are more connected in as-cast PTMSP than in aged PTMSP. The average cavity sizes calculated from computer simulation are in good agreement with PALS measurements. The transport and sorption properties of gases in as-cast and aged PTMSP are also measured by molecular simulation. Computer simulations showed the decrease of permeability and the increase of permeability selectivity in PTMSP membranes with physical aging, which agrees with experimental observations. The reduction in gas permeability with physical aging results mainly from the decrease of diffusion coefficients. Solubility coefficients show no significant changes with physical aging.     

Positronium annihilation data and actual free-volume distribution in polymers

Determination of the size distribution of free-volume holes in solids, in particular, polymers, is an important physicochemical problem. The positron annihilation technique has been proposed for this purpose. The central point in this technique is the quantitative interpretation of data, especially, for substances with a high specific surface area. A developed free-volume system in open-pore membrane materials, such as poly(trimethylsilylpropyne) PTMSP and the spirocyclically bound benzodioxane polymer PIM-1, and polymeric sorbents (hypercrosslinked polystyrenes) makes it possible for the first time to compare the sorption characteristics and positron annihilation data on the character of size distribution of nanopores in these polymers. In combination with the results of mathematical simulation of the structure and radiothermoluminescence measurements, the array of data indicate the structural inhomogeneity of the test amorphous materials. It was shown that this inhomogeneity in relation to the positron annihilation technique is expressed in the insufficiency of the representation of the orthopositronium decay curve by one component that takes into account the Gaussian lifetime distribution (symmetrical pore size distribution) and in the necessity of use of several decay components. The feasibility of revealing a nonrandom character of pore size distribution gives the positron annihilation technique an advantage over other approaches (inverse gas chromatography, ¹²⁹Xe NMR) to investigation of nanopores in polymers.     

Poly(vinylidene fluoride) membranes by phase inversion: the role the casting and coagulation conditions play in their morphology, crystalline structure and properties

Flat membranes with controlled morphology, pore dimensions, mechanical properties and crystal structure were prepared by wet and dry wet phase inversion from polyvinylidene fluoride (PVDF). The effects of several parameters such as precipitation temperature, composition of the polymer solution (concentration, type of solvent), exposure time before immersion in the coagulation bath, type of coagulant on the sequence and the extent of the two phase separation processes, i.e. liquid-liquid and liquid-solid demixing (crystallization), were studied.Using solvent/nonsolvent pairs with different mutual affinity (DMA/water, DMA/C1-C8 alcohols), different morphologies were obtained. High casting solution temperature plays important role to increase the rate of the liquid-liquid demixing on the crystallization, i.e. the type of crystallites formed (α-type) also by using a soft coagulation bath. Exposure time before immersion favours the first type of phase separation and therefore once again crystallites of α type were observed. At room temperature, using C1-C8 alcohols as nonsolvents, the presence of crystallites of α type can be related to molar volume of the coagulant.     

Functionalized poly(phenylene‐alt‐bithiophenes): Synthesis,chiroptical properties,and interaction with chiral amines

New functionalized, (a)chiral poly(phenylene‐alt‐bithiophene)s were prepared and their chiroptical properties were studied. The polymers were prepared by a Stille coupling reaction and were functionalized with protected carboxylic acid and amino functions (tert‐butyl ester and BOC respectively). The polymers are present as well conjugated rigid rods in solution, which (chirally) aggregate in nonsolvents and film. In a next step, the protecting group (tert‐butyl ester in case of the carboxylic acid) was removed. Aggregation of this polymer can be induced by addition of amines; if chiral amines are used, the polymer chains chirally stack. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4817–4829, 2008     

Poly[1‐(trimethylgermyl)‐1‐propyne] and poly[1‐(trimethylsilyl)‐1‐propyne] with various geometries: Their synthesis and properties

The polymerization of 1,2‐disubstituted acetylenes [1‐(trimethylgermyl)‐1‐propyne and 1‐(trimethylsilyl)‐1‐propyne] initiated by Nb‐ and Ta‐based catalytic systems was studied within a wide temperature range (?10 to +80 °C) with solvents (cyclohexane, CCl₄, toluene, anisol, and n‐chlorobutane) with variable dielectric constants (2.023–7.390). Conditions ensuring the synthesis of poly[1‐(trimethylsilyl)‐1‐propyne] (PTMSP) containing 20–80% cis units and poly[1‐(trimethylgermyl)‐1‐propyne] (PTMGP) containing 3–65% cis units were determined. The PTMSP and PTMGP samples were amorphous, exhibited a two‐phase structure characterized by the presence of less ordered regions and regions with an enhanced level of ordering, and differed in solubility. A correlation was found between the cis/trans ratio and the morphology, the geometrical density of PTMSP and PTMGP films, and the gas permeability of the polymers. The gas permeability and solubility behavior of PTMSP and PTMGP were examined in terms of the molecular characteristics of the polymer samples (the thermodynamic Kuhn segment and the Kerr electrooptic effect). It was demonstrated that the gas permeability, as well as the solubility of the polymers, was defined by their supramolecular ordering, which depended on the lengths of continuous sequences composed of units of analogous microstructures and on the flexibility of macrochains. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2133–2155, 2003     

Growth of organic n-conductors on thin polymer films for use in organic field effect transistors

Thin films of different polymers - poly(styrene) (PS), poly(methylmethacrylate) (PMMA), poly(vinylcarbazole) (PVCz), poly(vinylchloride) (PVC) and poly(vinylidene fluoride) (PVDF) - were deposited by spin-coating or by vapor deposition. On these polymers, thin films of (hexadecafluorophthalocyaninato)-oxovanadium (F₁₆PcVO) were prepared by physical vapor deposition. The growth of these films was monitored in situ by optical spectroscopy. The optical absorbance spectra were analyzed based on the coupling of transition dipoles to obtain information on the intermolecular arrangement of chromophores in the films. In all of these samples, the molecules are oriented with their molecular plane preferentially perpendicular to the substrate surface. This gives the desired overlap of the π-systems for electric conductance parallel to the substrate. Differences in the interactions were detected when deposition temperatures below or above the glass transition temperature of a given polymer were compared. The morphology of the polymer films and the deposited semiconductors were investigated by atomic force microscopy and scanning electron microscopy. The influence of the chosen substrate on the film structure is determined. The optical and electric properties of the films could thereby be influenced and the applicability of such films as active layers in organic thin film transistors is discussed.     

Preparation of hollow polylactide microcapsules through premix membrane emulsification—Effects of nonsolvent properties

Hollow polylactide microcapsules that can be used as ultrasound contrast agents were prepared using premix membrane emulsification. Polylactide/dichloromethane and dodecane solutions were emulsified together with a nonsolvent phase (water or a water–alcohol mixture) by repeated passage through a glass fibre membrane. The solvent, dichloromethane, diffuses out of the droplets and the polylactide solidifies around a droplet of dodecane. To investigate the effect of the nonsolvent properties on the size and span of the microcapsules, different methanol–water, ethanol–water and 2-propanol–water mixtures were used as nonsolvents.     

Electro chemical properties of porous PVdF-HFP membranes prepared with different nonsolvents

Porous poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) membranes were prepared by solvent–nonsolvent evaporation technique. Morphology and porosity of the membranes were varied with different nonsolvents and had an effect on electrochemical properties. The porous membranes were functionalized with different liquid electrolyte solutions such as p-toluene sulfonic acid/phosphoric acid/sulfuric acid. Maximum electrolyte uptake and minimal electrolyte leakage were tailored by the optimized porosity of the membranes. Thermal behavior obtained in this study ensures the complete evaporation of nonsolvents and ensures its thermal stability. The pTSA-activated PVdF-HFP/THF membrane exhibited high ionic conductivity of about 27.27 mS/cm and a lower methanol permeability in the range of 9.7 × 10⁻⁸ cm²/s. High compatibility between pTSA solution and porous PVdF-HFP polymer electrolyte membrane enhances its electro chemical behavior than that of conventional liquid electrolytes.     

两亲性ABA三嵌段共聚物的合成及其自组装行为研究

用Grubbs第二代催化剂引发降冰片烯类单体(NBEDE)和链转移剂在离子液体[bmim][BF4]中的开环易位聚合(ROMP)反应,反应体系保持均相,无聚合物析出,得到两端为叔溴的遥爪型官能化聚合物(Br-PNBEDE-Br).以Br-PNBEDE-Br作为大分子引发剂,在离子液体介质中引发甲基丙烯酸2-(二甲氨基)乙酯(DMAEMA)的原子转移自由基聚合(ATRP),制得分子量分布较窄的两亲性三嵌段共聚物(PDMAEMA-PNBEDE-PDMAEMA).利用动态激光光散射(DLS),原子力显微镜(AFM),透射电镜(TEM)等技术,考察嵌段共聚物在选择性溶剂/共溶剂(H2O/THF)中的胶束行为,以及溶液pH值对胶束的影响.结果表明,TEM观察到胶束为球形,由于TEM和AFM是在干态下测得胶束的粒径,而DLS是在溶液中测定胶束的流体力学直径,所以TEM和AFM得到的胶束粒径小于DLS的结果.不同pH值对胶束尺寸大小有明显的影响,胶束微粒随着pH值的增大而增大.     

Hydrocarbon/hydrogen mixed gas permeation in poly(1-trimethylsilyl-1-propyne) (PTMSP), poly(1-phenyl-1-propyne) (PPP), and PTMSP/PPP blends

The gas permeation properties of poly(1-trimethylsilyl-1-propyne) (PTMSP), poly(1-phenyl-1-propyne) (PPP), and blends of PTMSP and PPP have been determined with hydrocarbon/hydrogen mixtures. For a glassy polymer, PTMSP has unusual gas permeation properties which result from its very high free volume. Transport in PPP is similar to that observed in conventional, low-free-volume glassy polymers. In experiments with n-butane/hydrogen gas mixtures, PTMSP and PTMSP/PPP blend membranes were more permeable to n-butane than to hydrogen. PPP, on the other hand, was more permeable to hydrogen than to n-butane. As the PTMSP composition in the blend increased from 0 to 100%, n-butane permeability increased by a factor of 2600, and n-butane/hydrogen selectivity increased from 0.4 to 24. Thus, both hydrocarbon permeability and hydrocarbon/hydrogen selectivity increase with the PTMSP content in the blend. The selectivities measured with gas mixtures were markedly higher than selectivities calculated from the corresponding ratio of pure gas permeabilities. The difference between mixed gas and pure gas selectivity becomes more pronounced as the PTMSP content in the blend increases. The mixed gas selectivities are higher than pure gas selectivities because the hydrogen permeability in the mixture is much lower than the pure hydrogen permeability. For example, the hydrogen permeability in PTMSP decreased by a factor of 20 as the relative propane pressure (p/p_sat) in propane/hydrogen mixtures increased from 0 to 0.8. This marked reduction in permanent gas permeability in the presence of a more condensable hydrocarbon component is reminiscent of blocking of permanent gas transport in microporous materials by preferential sorption of the condensable component in the pores. The permeability of PTMSP to a five-component hydrocarbon/hydrogen mixture, similar to that found in refinery waste gas, was determined and compared with published permeation results for a 6-Å microporous carbon membrane. PTMSP exhibited lower selectivities than those of the carbon membrane, but permeability coefficients in PTMSP were nearly three orders of magnitude higher. © 1996 John Wiley & Sons, Inc.     

Gas and vapor transport properties of amorphous perfluorinated copolymer membranes based on 2,2-bistrifluoromethyl-4,5-difluoro-1,3-dioxole/tetrafluoroethylene

Teflon AF 2400 (Du Pont) is an amorphous, glassy perfluorinated copolymer containing 87 mol% 2,2-bistrifluoromethyl-4,5-difluoro-1,3-dioxole and 13 mol% tetrafluoroethylene. The polymer has an extremely high fractional free volume of 0.327. Permeability coefficients for helium, hydrogen, carbon dioxide, oxygen, nitrogen, methane, ethane, propane, and chlorodifluoromethane (Freon 22) were determined at temperatures from 25 to 60°C and pressures from 20 to 120 psig. Permeation properties were also determined at a feed pressure of 200 psig at 25°C with a 2 mol% n-butane/98 mol% methane mixture. Permeabilities of permanent gases in Teflon AF 2400 are among the highest of all known polymers; the oxygen permeability coefficient at 25°C is 1600 × 10⁻¹⁰ cm³ (STP) cm/cm² s cmHg and the nitrogen permeability coefficient is 780 × 10⁻¹⁰ cm³ (STP) cm/cm² s cmHg. The permeabilities of organic vapors increase up to 20-fold as the vapor activity increases from 0.1 to unity, indicating that Teflon AF 2400 is easily plasticized. Although Teflon AF 2400 is an ultrahigh-free-volume polymer like poly(1-trimethylsilyl-1-propyne) [PTMSP], their gas permeation properties differ significantly. Teflon AF 2400 shows gas transport behavior similar to that of conventional, low-free-volume glassy polymers. PTMSP, on the other hand, acts more like a nanoporous carbon than a conventional glassy polymer.