Perovskite SrCo0.9Nb0.1O3−δ as an Anion‐Intercalated Electrode Material for Supercapacitors with Ultrahigh Volumetric Energy Density

We have synthesized and characterized perovskite‐type SrCo_0.9Nb_0.1O_3−δ (SCN) as a novel anion‐intercalated electrode material for supercapacitors in an aqueous KOH electrolyte, demonstrating a very high volumetric capacitance of about 2034.6 F cm⁻³ (and gravimetric capacitance of ca. 773.6 F g⁻¹) at a current density of 0.5 A g⁻¹ while maintaining excellent cycling stability with a capacity retention of 95.7 % after 3000 cycles. When coupled with an activated carbon (AC) electrode, the SCN/AC asymmetric supercapacitor delivered a specific energy density as high as 37.6 Wh kg⁻¹ with robust long‐term stability.     

Bio-inspired and Eco-friendly Synthesis of 3D Spongy Meso-Microporous Carbons from CO2 for Supercapacitors

Inspired by the spongy bone structures, three-dimensional (3D) sponge-like carbons with meso-microporous structures are synthesized through one-step electro-reduction of CO₂ in molten carbonate Li₂CO₃−Na₂CO₃−K₂CO₃ at 580 °C. SPC4-0.5 (spongy porous carbon obtained by electrolysis of CO₂ at 4 A for 0.5 h) is synthesized with the current efficiency of 96.9 %. SPC4-0.5 possesses large electrolyte ion accessible surface area, excellent wettability and electronical conductivity, ensuring the fast and effective mass and charge transfer, which make it an advcanced supercapacitor electrode material. SPC4-0.5 exhibits a specific capacitance as high as 373.7 F g⁻¹ at 0.5 A g⁻¹, excellent cycling stability (retaining 95.9 % of the initial capacitance after 10000 cycles at 10 A g⁻¹), as well as high energy density. The applications of SPC4-0.5 in quasi-solid-state symmetric supercapacitor and all-solid-state flexible devices for energy storage and wearable piezoelectric sensor are investigated. Both devices show considerable capacitive performances. This work not only presents a controllable and facile synthetic route for the porous carbons but also provides a promising way for effective carbon reduction and green energy production.     

A High-Performance Asymmetric Supercapacitor Based on Tungsten Oxide Nanoplates and Highly Reduced Graphene Oxide Electrodes

Tungsten oxide/graphene hybrid materials are attractive semiconductors for energy-related applications. Herein, we report an asymmetric supercapacitor (ASC, HRG//m-WO₃ ASC), fabricated from monoclinic tungsten oxide (m-WO₃) nanoplates as a negative electrode and highly reduced graphene oxide (HRG) as a positive electrode material. The supercapacitor performance of the prepared electrodes was evaluated in an aqueous electrolyte (1 m H₂SO₄) using three- and two-electrode systems. The HRG//m-WO₃ ASC exhibits a maximum specific capacitance of 389 F g⁻¹ at a current density of 0.5 A g⁻¹, with an associated high energy density of 93 Wh kg⁻¹ at a power density of 500 W kg⁻¹ in a wide 1.6 V operating potential window. In addition, the HRG//m-WO₃ ASC displays long-term cycling stability, maintaining 92 % of the original specific capacitance after 5000 galvanostatic charge–discharge cycles. The m-WO₃ nanoplates were prepared hydrothermally while HRG was synthesized by a modified Hummers method.     

High Energy Density Heteroatom (O,N and S) Enriched Activated Carbon for Rational Design of Symmetric Supercapacitors

Carbon-based symmetric supercapacitors (SCs) are known for their high power density and long cyclability, making them an ideal candidate for power sources in new-generation electronic devices. To boost their electrochemical performances, deriving activated carbon doped with heteroatoms such as N, O, and S are highly desirable for increasing the specific capacitance. In this regard, activated carbon (AC) self-doped with heteroatoms is directly derived from bio-waste (lima-bean shell) using different KOH activation processes. The heteroatom-enriched AC synthesized using a pretreated carbon-to-KOH ratio of 1:2 (ONS@AC-2) shows excellent surface morphology with a large surface area of 1508 m² g⁻¹. As an SC electrode material, the presence of heteroatoms (N and S) reduces the interfacial charge-transfer resistance and increases the ion-accessible surface area, which inherently provides additional pseudocapacitance. The ONS@AC-2 electrode attains a maximum specific capacitance (C_sp) of 342 F g⁻¹ at a specific current of 1 Ag⁻¹ in 1 m NaClO₄ electrolyte at the wide potential window of 1.8 V. Moreover, as symmetric SCs the ONS@AC-2 electrode delivers a maximum specific capacitance (C_sc) of 191 F g⁻¹ with a maximum specific energy of 21.48 Wh kg⁻¹ and high specific power of 14 000 W kg⁻¹ and excellent retention of its initial capacitance (98 %) even after 10000 charge/discharge cycles. In addition, a flexible supercapacitor fabricated utilizing ONS@AC-2 electrodes and a LiCl/polyvinyl alcohol (PVA)-based polymer electrolyte shows a maximum C_sc of 119 F g⁻¹ with considerable specific energy and power.     

Proton Intercalation/De-intercalation Chemistry in Phenazine-based Anode for Hydronium-ion Batteries

Hydronium-ion batteries have received significant attention owing to the merits of extraordinary sustainability and excellent rate abilities. However, achieving high-performance hydronium-ion batteries remains a challenge due to the inferior properties of anode materials in strong acid electrolyte. Herein, a hydronium-ion battery is constructed which is based on a diquinoxalino [2,3-a:2’,3’-c] phenazine (HATN) anode and a MnO₂@graphite felt cathode in a hybrid acidic electrolyte. The fast kinetics of hydronium-ion insertion/extraction into HATN electrode endows the HATN//MnO₂@GF battery with enhanced electrochemical performance. This battery exhibits an excellent rate performance (266 mAh g⁻¹ at 0.5 A g⁻¹, 97 mAh g⁻¹ at 50 A g⁻¹), attractive energy density (182.1 Wh kg⁻¹) and power density (31.2 kW kg⁻¹), along with long-term cycle stability. These results shed light on the development of advanced hydronium-ion batteries.     

β‐Co(OH)2 Nanosheets: A Superior Pseudocapacitive Electrode for High‐Energy Supercapacitors

In this work, β‐Co(OH)₂ nanosheets are explored as efficient pseudocapacitive materials for the fabrication of 1.6 V class high‐energy supercapacitors in asymmetric fashion. The as‐synthesized β‐Co(OH)₂ nanosheets displayed an excellent electrochemical performance owing to their unique structure, morphology, and reversible reaction kinetics (fast faradic reaction) in both the three‐electrode and asymmetric configuration (with activated carbon, AC). For example, in the three‐electrode set‐up, β‐Co(OH)₂ exhibits a high specific capacitance of ∼675 F g⁻¹ at a scan rate of 1 mV s⁻¹. In the asymmetric supercapacitor, the β‐Co(OH)₂∥AC cell delivers a maximum energy density of 37.3 Wh kg⁻¹ at a power density of 800 W kg⁻¹. Even at harsh conditions (8 kW kg⁻¹), an energy density of 15.64 Wh kg⁻¹ is registered for the β‐Co(OH)₂∥AC assembly. Such an impressive performance of β‐Co(OH)₂ nanosheets in the asymmetric configuration reveals the emergence of pseudocapacitive electrodes towards the fabrication of high‐energy electrochemical charge storage systems.     

High-performance Flexible Symmetric Supercapacitor Based on Heterostructured PANI@MoS2 Nanocomposite Electrode

Three-dimensional (3D) heterostructured molybdenum disulfide (MoS₂) is used as base materials for aniline monomer in situ polymerization on its surface. It is found that the aniline addition has a remarkable effect on the energy storage of the final compounds due to the improvement of the conductivity and structure stability combined with the synergistic effect between the two types of species. The optimal compound of PANI@MoS₂-150 not only shows a high capacitance value of 801.4 F ⋅ g⁻¹ at a current density of 0.5 A ⋅ g⁻¹ but also provides a high retention rate of 77.4 % after 10,000 cycles. The capacitance fading may be due to the increase of the internal resistance analyzed by EIS. Furthermore, a flexible symmetric supercapacitor based on PANI@MoS₂-150 has also been fabricated and the specific capacitance reaches 105 F ⋅ g⁻¹ at a current density of 1 A ⋅ g⁻¹. Impressively, the capacitance retention is larger than 100 % undergoing 10,000 cycles. Besides, the highest energy density of 21 Wh ⋅ kg⁻¹ was obtained. Additionally, the fabricated symmetric supercapacitor demonstrates excellent flexibility.     

Hierarchical FeCo2S4@FeNi2S4 Core/Shell Nanostructures on Ni Foam for High-Performance Supercapacitors

The design of electrode materials with rational core/shell structures is promising for improving the electrochemical properties of supercapacitors. Hence, hierarchical FeCo₂S₄@FeNi₂S₄ core/shell nanostructures on Ni foam were fabricated by a simple hydrothermal method. Owing to their structure and synergistic effect, they deliver an excellent specific capacitance of 2393 F g⁻¹ at 1 A g⁻¹ and long cycle lifespan as positive electrode materials. An asymmetric supercapacitor device with FeCo₂S₄@FeNi₂S₄ as positive electrode and graphene as negative electrode exhibited a specific capacitance of 133.2 F g⁻¹ at 1 A g⁻¹ and a high energy density of 47.37 W h kg⁻¹ at a power density of 800 W kg⁻¹. Moreover, the device showed remarkable cycling stability with 87.0 % specific-capacitance retention after 5000 cycles at 2 A g⁻¹. These results demonstrate that the hierarchical FeCo₂S₄@FeNi₂S₄ core/shell structures have great potential in the field of electrochemical energy storage.     

Flexible Polyester Cellulose Paper Supercapacitor with a Gel Electrolyte

A low-cost polyester cellulose paper has been used as a substrate for a flexible supercapacitor device that contains aqueous carbon nanotube ink as the electrodes and a polyvinyl alcohol (PVA)-based gel as the electrolyte. Gel electrolytes have attracted much interest due to their solvent-holding capacity and good film-forming capability. The electrodes are characterized for their conductivity and morphology. Because of its high conductivity, the conductive paper is studied in supercapacitor applications as active electrodes and as separators after coating with polyvinylidene fluoride. Carbon nanotubes deposited on porous paper are more accessible to ions in the electrolyte than those on flat substrates, which results in higher power density. A simple fabrication process is achieved and paper supercapacitors are tested for their performance in both aqueous and PVA gel electrolytes by using galvanostatic and cyclic voltammetry methods. A high specific capacitance of 270 F g⁻¹ and an energy density value of 37 W h kg⁻¹ are achieved for devices with PVA gel electrolytes. Furthermore, this device can maintain excellent specific capacitance even under high currents. This is also confirmed by another counter experiment with aqueous sulfuric acid as the electrolyte. The cycle life, one of the most critical parameters in supercapacitor operations, is found to be excellent (6000 cycles) and less than 0.5 % capacitance loss is observed. Moreover, the supercapacitor device is flexible and even after twisting does not show any cracks or evidence of breakage, and shows almost the same specific capacitance of 267 F g⁻¹and energy density of 37 W h kg⁻¹. This work suggests that a paper substrate can be a highly scalable and low-cost solution for high-performance supercapacitors.     

Rational Design of Porous Structured Nickel Manganese Sulfides Hexagonal Sheets-in-Cage Structures as an Advanced Electrode Material for High-Performance Electrochemical Capacitors

The design of hierarchical electrodes comprising multiple components with a high electrical conductivity and a large specific surface area has been recognized as a feasible strategy to remarkably boost pseudocapacitors. Herein, we delineate hexagonal sheets-in-cage shaped nickel–manganese sulfides (Ni-Mn-S) with nanosized open spaces for supercapacitor applications to realize faster redox reactions and a lower charge-transfer resistance with a markedly enhanced specific capacitance. The hybrid was facilely prepared through a two-step hydrothermal method. Benefiting from the synergistic effect between Ni and Mn active sites with the improvement of both ionic and electric conductivity, the resulting Ni-Mn-S hybrid displays a high specific capacitance of 1664 F g⁻¹ at a current density of 1 A g⁻¹ and a capacitance of 785 F g⁻¹ is maintained at a current density of 50 A g⁻¹, revealing an outstanding capacity and rate performance. The asymmetric supercapacitor device assembled with the Ni-Mn-S hexagonal sheets-in-cage as the positive electrode delivers a maximum energy density of 40.4 Wh kg⁻¹ at a power density of 750 W kg⁻¹. Impressively, the cycling retention of the as-fabricated device after 10 000 cycles at a current density of 10 A g⁻¹ reaches 85.5 %. Thus, this hybrid with superior capacitive performance holds great potential as an effective charge-storage material.     

Mn3−xFexO4 Hollow Nanostructures for High-Performance Asymmetric Supercapacitor Applications

Design of hollow nanostructure and controllable phase of mixed metal oxides for improving performance in supercapacitor applications is highly desirable. Here we demonstrate the rational design and synthesis of Mn_3−xFe_xO₄ hollow nanostructures for supercapacitor applications. Owing to high porosity and the specific surface area that provides more active sites for electrochemical reactions, the electrochemical performance of Mn_3−xFe_xO₄ hollow nanostructure substantially enhanced comparing with pristine Mn₃O₄. Particularly, in 1.0 M KOH electrolyte, Mn_0.16Fe_2.84O₄ with a typical diameter of 20 nm exhibits excellent specific capacitance of 2675, 2320, 1662, 987 F g⁻¹ at current densities of 1, 2, 5, 10 A g⁻¹, respectively, which is significantly superior to those of other transition metal oxides. Besides, an asymmetric supercapacitor is assembled by using Mn_0.16Fe_2.84O₄ and activated carbon as a positive and a negative electrode, respectively. Electrochemical results indicate a high energy density of 42 Wh kg⁻¹ at a power density of 0.75 kW kg⁻¹, which makes this hollow nanostructure a highly promising electrode for achieving high-performance next-generation supercapacitors.     

One-Pot Hydrothermal Synthesis of Ternary 1T-MoS2/Hexa-WO3/Graphene Composites for High-Performance Supercapacitors

A new ternary composite of 1T-molybdenum disulfide, hexagonal tungsten trioxide, and reduced graphene oxide (M-W-rGO) is synthesized by using a one-pot hydrothermal process. The synergetic effect of 1T-MoS₂ and hexa-WO₃ nanoflowers improves the electrochemical performance for supercapacitors by inducing additional active sites and hexagonal tunnels, respectively, which lead to high storage capacity and easy transfer of electrolyte ions. The ternary M-W-rGO composite has a high specific capacitance of 836 F g⁻¹ at 1 A g⁻¹, which is nearly twice that of binary composites of M-rGO and W-rGO with high capacitance retention of 86.35 % after 3000 cycles at a high current density of 5 A g⁻¹. This study provides a new ternary composite that can be used as an electrode material for high-performance supercapacitors.     

Mixed Cu2Se Hexagonal Nanosheets@Co3Se4 Nanospheres for High-Performance Asymmetric Supercapacitors

Rational designing and constructing multiphase hybrid electrode materials is an effective method to compensate for the performance defects of the single component. Based on this strategy, Cu₂Se hexagonal nanosheets@Co₃Se₄ nanospheres mixed structures have been fabricated by a facile two-step hydrothermal method. Under the synergistic effect of the high ionic conductivity of Cu₂Se and the remarkable cycling stability of Co₃Se₄, Cu₂Se@Co₃Se₄ can exhibit outstanding electrochemical performance as a novel electrode material. The as-prepared Cu₂Se@Co₃Se₄ electrode displays high specific capacitance of 1005 F g⁻¹ at 1 A g⁻¹ with enhanced rate capability (56 % capacitance retention at 10 A g⁻¹), and ultralong lifespan (94.2 % after 10 000 cycles at 20 A g⁻¹). An asymmetric supercapacitor is assembled applying the Cu₂Se@Co₃Se₄ as anode and graphene as cathode, which delivers a wide work potential window of 1.6 V, high energy density (30.9 Wh kg⁻¹ at 0.74 kW kg⁻¹), high power density (21.0 Wh kg⁻¹ at 7.50 kW kg⁻¹), and excellent cycling stability (85.8 % after 10 000 cycles at 10 A g⁻¹).     

Comparative Study of the Supercapacitive Performance of Three Ferrocene-Based Structures: Targeted Design of a Conductive Ferrocene-Functionalized Coordination Polymer as a Supercapacitor Electrode

As redox-active based supercapacitors are known as highly desirable next-generation supercapacitor electrodes, the targeted design of two ferrocene-functionalized (Fc(COOH)₂) clusters based on coinage metals, [(PPh₃)₂AgO₂CFcCO₂Ag(PPh₃)₂]₂ ⋅ 7 CH₃OH (SC₁: super capacitor) and [(PPh₃)₃CuO₂CFcCO₂Cu(PPh₃)₃] ⋅ 3 CH₃OH (SC₂), is reported. Both structures are fully characterized by various techniques. The structures are utilized as energy storage electrode materials, giving 130 F g⁻¹ and 210 F g⁻¹ specific capacitance at 1.5 A g⁻¹ in Na₂SO₄ electrolyte, respectively. The obtained results show that the presence of Cu^I instead of Ag^I improves the supercapacitive performance of the cluster. Further, to improve the conductivity, the PSC₂ ([(PPh₃)₂CuO₂CFcCO₂]_∞), a polymeric structure of SC₂, was synthesized and used as an energy storage electrode. PSC₂ displays high conductivity and gives 455 F g⁻¹ capacitance at 3 A g⁻¹. The PSC₂ as a supercapacitor electrode presents a high power density (2416 W kg⁻¹), high energy density (161 Wh kg⁻¹), and long cycle life over 4000 cycles (93 %). These results could lead to the amplification of high-performance supercapacitors in new areas to develop real applications and stimulate the use of the targeted design of coordination polymers without hybridization or compositions with additive materials.     

Hierarchical Carbon Nanowire/Ni@MnO2 Nanocomposites for High-Performance Asymmetric Supercapacitors

A 3D hierarchical carbon cloth/nitrogen-doped carbon nanowires/Ni@MnO₂ (CC/N-CNWs/Ni@MnO₂) nanocomposite electrode was rationally designed and prepared by electrodeposition. The N-CNWs derived from polypyrrole (PPy) nanowires on the carbon cloth have an open framework structure, which greatly increases the contact area between the electrode and electrolyte and provides short diffusion paths. The incorporation of the Ni layer between the N-CNWs and MnO₂ is beneficial for significantly enhancing the electrical conductivity and boosting fast charge transfer as well as improving the charge-collection capacity. Thus, the as-prepared 3D hierarchical CC/N-CNWs/Ni@MnO₂ electrode exhibits a higher specific capacitance of 571.4 F g⁻¹ compared with those of CC/N-CNWs@MnO₂ (311 F g⁻¹), CC/Ni@MnO₂ (196.6 F g⁻¹), and CC@MnO₂ (186.1 F g⁻¹) at 1 A g⁻¹ and remarkable rate capability (367.5 F g⁻¹ at 10 A g⁻¹). Moreover, asymmetric supercapacitors constructed with CC/N-CNWs/Ni@MnO₂ as cathode material and activated carbon as anode material deliver an impressive energy density of 36.4 W h kg⁻¹ at a power density of 900 W kg⁻¹ and a good cycling life (72.8 % capacitance retention after 3500 cycles). This study paves a low-cost and simple way to design a hierarchical nanocomposite electrode with large surface area and superior electrical conductivity, which has wide application prospects in high-performance supercapacitors.     

Controllable Synthesis of NiCo LDH Nanosheets for Fabrication of High‐Performance Supercapacitor Electrodes

A unipolar pulse electrodeposition method was employed to controllably synthesize nanosheet type NiCo LDH. The effect of concentration rate of Ni(NO₃)₂/Co(NO₃)₂ preparation solution on crystalline structure, morphology and supercapacitive performance was investigated systematically. Experimental found that the morphology and composition of NiCo LDH was highly depend on the Ni²⁺/Co²⁺ molar ratios of preparation solution; and the obtained Ni_0.76Co_0.24 LDH materials showed small nanosheet size and uniform distribution on carbon fiber electrode. Ni_0.76Co_0.24 LDH electrode was evaluated for supercapacitor application, which revealed a high specific capacitances of 2189.8 and 1908.8 F g⁻¹ at the current density of 1 and 30 A g⁻¹ respectively and a good cycle stability, retaining 70.3 % of the initial capacitance after 20000 charge and discharge cycles at 50 A g⁻¹. Moreover, the Ni_0.76Co_0.24 LDH electrode exhibits a high energy density of 76 Wh Kg⁻¹ at a power density of 250 W Kg⁻¹ and a high power density of 7500 W Kg⁻¹ at energy density of 66 Wh Kg⁻¹. The as‐prepared Ni_0.76Co_0.24 LDH as positive electrode for asymmetric supercapacitor exhibits excellent energy density of 4.1 Wh Kg^‐1 at a power density of 4000 W Kg^‐1     

MnO2 Nanosheets Grown on Nitrogen‐Doped Hollow Carbon Shells as a High‐Performance Electrode for Asymmetric Supercapacitors

A hierarchical hollow hybrid composite, namely, MnO₂ nanosheets grown on nitrogen‐doped hollow carbon shells (NHCSs@MnO₂), was synthesized by a facile in situ growth process followed by calcination. The composite has a high surface area (251 m²g^?1) and mesopores (4.5 nm in diameter), which can efficiently facilitate transport during electrochemical cycling. Owing to the synergistic effect of NHCSs and MnO₂, the composite shows a high specific capacitance of 306 F g^?1, good rate capability, and an excellent cycling stability of 95.2 % after 5000 cycles at a high current density of 8 A g^?1. More importantly, an asymmetric supercapacitor (ASC) assembled by using NHCSs@MnO₂ and activated carbon as the positive and negative electrodes exhibits high specific capacitance (105.5 F g^?1 at 0.5 A g^?1 and 78.5 F g^?1 at 10 A g^?1) with excellent rate capability, achieves a maximum energy density of 43.9 Wh kg^?1 at a power density of 408 W kg^?1, and has high stability, whereby the ASC retains 81.4 % of its initial capacitance at a current density of 5 A g^?1 after 4000 cycles. Therefore, the NHCSs@MnO₂ electrode material is a promising candidate for future energy‐storage systems.     

Intertwined Titanium Carbide MXene within a 3 D Tangled Polypyrrole Nanowires Matrix for Enhanced Supercapacitor Performances

The exploration of the rational design and synthesis of unique and robust architectured electrodes for the high capacitance, rate capability, and stability of supercapacitors is crucial to the future of energy storage technology. Herein, an in situ synthesis of multilayered titanium carbide MXene tightly caging within a 3 D conducting tangled polypyrrole (PPy) nanowire (NW) network is proposed as an effective strategy to prevent the aggregation of MXene, profoundly enhancing the electrochemical performance of the supercapacitor. Owing to the beneficial effects of an ideal 3 D interconnected porous structure and high electrical conductivity, the obtained electrode exhibits fast charge and ion transport kinetics as well as full usage of active material. As expected, the 3 D Ti₃C₂T_x@PPY NW exhibits a specific capacitance five times higher than that of pristine MXene (610 F g⁻¹), a good rate capability up to a current density of 25 A g⁻¹, and excellent stability with 100 % retention after 14 000 cycles at 4 A g⁻¹, outperforming the known state-of-the-art MXene-based supercapacitor. Our work provides a facile method for enhancing the performance of MXene-based energy storage devices.     

All-solid-state flexible asymmetric supercapacitors with high energy and power densities based on NiCo_2S_4@MnS and active carbon

Electrode material based on a novel core–shell structure consisting of NiCo_2S_4(NCS) solid fiber core and Mn S(MS) sheet shell(NCS@MS) in situ grown on carbon cloth(CC) has been successfully prepared by a simple sulfurization-assisted hydrothermal method for high performance supercapacitor. The synthesized NiCo_2S_4@Mn S/CC electrode shows high capacitance of 1908.3 F g~(-1) at a current density of 0.5 A g~(-1) which is higher than those of NiCo_2S_4 and Mn S at the same current density. A flexible all-solid-state asymmetric supercapacitor(ASC) is constructed by using NiCo_2S_4@Mn S/CC as positive electrode, active carbon/CC as negative electrode and KOH/poly(vinyl alcohol)(PVA) as electrolyte. The optimized ASC shows a maximum energy density of 23.3 Wh kg~(-1) at 1 A g~(-1), a maximum power density of about7.5 kw kg~(-1) at 10 A g~(-1) and remarkable cycling stability. After 9000 cycles, the ASC still exhibited67.8% retention rate and largely unchanged charge/discharge curves. The excellent electrochemical properties are resulted from the novel core–shell structure of the NiCo_2S_4@Mn S/CC electrode, which possesses both high surface area for Faraday redox reaction and superior kinetics of charge transport. The NiCo_2S_4@Mn S/CC electrode shows a promising potential for energy storage applications in the future.     

A facile synthesis of hierarchical porous carbon derived from renewable lignin for high-performance supercapacitor

In this work, we proposed a facile one-pot pyrolysis method to conveniently manufacture lignin-derived carbon materials with graded porous construction for use in supercapacitors. The renewable lignin was selected as precursor, while the potassium citrate was used as a pore-forming agent. The properties of the prepared lignin-derived carbon (LAC) and the performance for supercapacitor application were thoroughly evaluated. The LAC at optimal preparation conditions shows a layered porous structure with a large specific surface area of 3174 cm² g⁻¹ and pore volume of 2.796 cm³ g⁻¹, where the specific capacitance reach to 241 F g⁻¹ at 1 A g⁻¹ scan rate in 6 M KOH electrolyte solution. At the same time, the specific capacitance remains at 220 F g⁻¹ even at an excessive scan velocity of 20 A g⁻¹, while the capacitance retention is still close to 91.3%. The capacitance retention rate is stable above 95% after 10,000 charge/discharge cycles, which shows the desired long-time stability. All these results demonstrate the outstanding properties of the new prepared LAC material and the considerable application potential in the field of electrical energy storage.