Photomagnetic K(0.25)Ni(1-x)Co(x)[Fe(CN)6]·nH2O and K(0.25)Co[Fe(CN)6](0.75y)[Cr(CN)6](0.75(1-y))·nH2O Prussian blue analogue solid solutions

Magnetically bistable solid solutions of Prussian blue analogues with chemical formulas of K(α)Ni(1-x)Co(x)[Fe(CN)(6)](β)·nH(2)O (Ni(1-x)Co(x)Fe) and K(α)Co(γ)[Fe(CN)(6)](y)[Cr(CN)(6)](1-y)·nH(2)O (CoFe(y)Cr(1-y)) have been synthesized and studied using mass spectrometry, M?ssbauer spectroscopy, X-ray diffraction, temperature-dependent infrared spectroscopy, and dc magnetometry. These compounds provide insight into interfaces between the photomagnetic Co-Fe Prussian blue analogue and the high-T(C) Ni-Cr Prussian blue analogue that exist in high-T(C) photomagnetic heterostructures. This investigation shows that the bistability of Co-Fe is strongly modified by metal substitution, with Ni(1-x)Co(x)Fe stabilizing high-spin cobalt-iron pairs and CoFe(y)Cr(1-y) stabilizing low-spin cobalt-iron pairs, while both types of substitution cause a dramatic decrease in the bistability of the material.     

Synthesis and properties of AFe2O4 (A = Mn, Fe, Co, Ni, Zn) nanoparticles produced by deposition from diethylene glycol solution

Nanosized particles of AFe₂O₄ (A = Mn, Fe, Co, Ni, or Zn) ferromagnetic materials having a spinel structure are synthesized by deposition from nonaqueous solutions. Nanoparticle formation features in a diethylene glycol solution using metal nitrates as starting compounds are discussed based on NMR data. Crystallographic and microscopic studies of the synthesized compounds are conducted.     

Atomic-Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with Efficient CO2 Electrolysis

In situ exsolution of metal nanoparticles in perovskite under reducing atmosphere is employed to generate a highly active metal–oxide interface for CO₂ electrolysis in a solid oxide electrolysis cell. Atomic-scale insight is provided into the exsolution of CoFe alloy nanoparticles in La_0.4Sr_0.6Co_0.2Fe_0.7Mo_0.1O_3−δ (LSCFM) by in situ scanning transmission electron microscopy (STEM) with energy-dispersive X-ray spectroscopy and DFT calculations. The doped Mo atoms occupy B sites of LSCFM, which increases the segregation energy of Co and Fe ions at B sites and improves the structural stability of LSCFM under a reducing atmosphere. In situ STEM measurements visualized sequential exsolution of Co and Fe ions, formation of CoFe alloy nanoparticles, and reversible exsolution and dissolution of CoFe alloy nanoparticles in LSCFM. The metal–oxide interface improves CO₂ adsorption and activation, showing a higher CO₂ electrolysis performance than the LSCFM counterparts.     

Atomic‐Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with Efficient CO2 Electrolysis

In situ exsolution of metal nanoparticles in perovskite under reducing atmosphere is employed to generate a highly active metal–oxide interface for CO₂ electrolysis in a solid oxide electrolysis cell. Atomic‐scale insight is provided into the exsolution of CoFe alloy nanoparticles in La_0.4Sr_0.6Co_0.2Fe_0.7Mo_0.1O_3?δ (LSCFM) by in situ scanning transmission electron microscopy (STEM) with energy‐dispersive X‐ray spectroscopy and DFT calculations. The doped Mo atoms occupy B sites of LSCFM, which increases the segregation energy of Co and Fe ions at B sites and improves the structural stability of LSCFM under a reducing atmosphere. In situ STEM measurements visualized sequential exsolution of Co and Fe ions, formation of CoFe alloy nanoparticles, and reversible exsolution and dissolution of CoFe alloy nanoparticles in LSCFM. The metal–oxide interface improves CO₂ adsorption and activation, showing a higher CO₂ electrolysis performance than the LSCFM counterparts.     

Hydrothermal Synthesis of a rGO Nanosheet Enwrapped NiFe Nanoalloy for Superior Electrocatalytic Oxygen Evolution Reactions

Graphene‐based hybrid nanostructures possess many advantages in the field of electrochemical energy applications. In this work, a facile and efficient hydrothermal approach has been developed for the preparation of NiFe alloy nanoparticles/rGO hybrid nanostructures, in which the nanoparticles are well combined with rGO nanosheets and the size of the nanoparticles is about 100 nm. Moreover, the electrochemical oxygen evolution reaction (OER) tests confirmed that the obtained NiFe/rGO hybrid nanostructures possess notably higher activity than both the rGO‐free NiFe nanoparticles and pure Ni/rGO hybrids, and the optimal NiFe ratio is 2:1. The OER overpotential at 20 mA cm^?1?2 with Ni₂Fe/rGO is as low as 0.285 V, which is 96 mV lower than that of pure Ni/rGO hybrids. Meanwhile, the Ni₂Fe/rGO catalyst has excellent stability. Therefore, this work contributes a facile and efficient method to prepare a NiFe alloy nanoparticles/rGO hybrid structure for potential applications in the field of electrochemical energy devices, such as electrochemical water splitting cells, rechargeable metal/air batteries, etc.     

钴掺杂的磁性氧化铁纳米粒子的可控合成

通过油酸盐前驱体高温热解法制备出大小均匀的钴掺杂四氧化三铁球形纳米粒子, 其钴/铁摩尔比可以通过调节油酸钴与油酸铁的比例进行调变. 当产物中钴/铁摩尔比从0.024增加到0.156, 所制备的氧化铁纳米粒子的饱和磁矩从39 emu·g^-1逐渐减小到30 emu·g^-1, 而矫顽力从0 Oe升至190 Oe. 在305℃下, 随着反应体系的热解时间由0.5 h 增加到3 h, 所制备出的氧化铁纳米粒子尺寸逐渐由7 nm增加到14 nm. 热解时间较短时, 以高价态的四氧化三铁的晶型为主, 辅之以少量的氧化亚铁; 热解时间增加至2 h, 产物的晶型为四氧化三铁和氧化亚铁的复合物; 而继续增加热解时间至3 h, 除四氧化三铁和氧化亚铁之外, 还出现少量的零价态的CoFe合金, 说明铁(钴)元素经历了由三价到二价, 最后被还原为零价的过程. 随着反应温度的升高, 产物的尺寸逐渐增大, 同时产物中氧化亚铁的含量增多.     

Non-Stoichiometric CoFe2O4 Nanoparticles Supported on an Amorphous Silica Matrix

Non-Stoichiometric CoFe₂O₄ nanoparticles dispersed in an silica matrix with a silica content of 87 wt% and Co/Fe molar ratio of 1:1, were prepared by the sol-gel method using an ethanolic solution of tetraethoxysilane and either iron(III) and cobalt(II) nitrates or iron(II) and cobalt(II) acetates. The influence of different metal precursors on the xerogels were examined by X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and N₂ physisorption measurements at 77 K. Magnetic properties of the samples were investigated by field cooled FC and zero field cooled ZFC measurements.Depending on the metal precursor, different spinel oxides of a few nanometers were observed in the samples treated at 350°C. After heating at 900°C non-stoichiometric CoFe₂O₄ was formed in both samples, whose average particle size was only slightly larger than in samples treated at 350°C.     

还原条件对NiFe2O4－δ结构稳定性及其催化分解CO2活性的影响

采用柠檬酸络合法制备NiFe2O4，运用XRD、DTA-TG等手段对其结构进行表征，并探讨还原条件对NiFe2O4－δ的结构稳定性及其催化分解CO2成C反应活性的影响。研究结果表明，由柠檬酸络合法制备的NiFe2O4样品量为0.5g时，利用H2还原制备氧缺位NiFe2O4－δ的最佳还原条件为还原温度320℃、氢气流量40mL/min、还原时间3h。还原温度过高、还原时间过长以及氢气流量过大，均会使NiFe2O4－δ还原过度，尖晶石结构瓦解而转变成Fe(Ni)合金和α-Fe等。     

Monodisperse MFe2O4 (M = Fe, Co, Mn) nanoparticles

High-temperature solution phase reaction of iron(III) acetylacetonate, Fe(acac)(3), with 1,2-hexadecanediol in the presence of oleic acid and oleylamine leads to monodisperse magnetite (Fe(3)O(4)) nanoparticles. Similarly, reaction of Fe(acac)(3) and Co(acac)(2) or Mn(acac)(2) with the same diol results in monodisperse CoFe(2)O(4) or MnFe(2)O(4) nanoparticles. Particle diameter can be tuned from 3 to 20 nm by varying reaction conditions or by seed-mediated growth. The as-synthesized iron oxide nanoparticles have a cubic spinel structure as characterized by HRTEM, SAED, and XRD. Further, Fe(3)O(4) can be oxidized to Fe(2)O(3), as evidenced by XRD, NEXAFS spectroscopy, and SQUID magnetometry. The hydrophobic nanoparticles can be transformed into hydrophilic ones by adding bipolar surfactants, and aqueous nanoparticle dispersion is readily made. These iron oxide nanoparticles and their dispersions in various media have great potential in magnetic nanodevice and biomagnetic applications.     

NaxMyFe（CN）6（M=Fe,Co,Ni）:一类新颖的钠离子电池正极材料

应用化学沉淀法合成了3种普鲁士蓝类化合物NaxMyFe(CN)6(M=Fe,Co,Ni),并研究了以此类化合物作钠离子电池正极材料的可行性.XRD和SEM分析表明,合成的3种目标产物均具有典型的立方晶型结构,粒子尺寸为20～50 nm.循环伏安扫描和恒电流充放电测试表明,这类化合物均能实现可逆的钠离子嵌入-脱嵌反应,但不同的金属表现出不同的电化学性质.如M为Fe或Co,材料中的Fe(CN)64+和Fe2+/Co2+离子这两个电化学活性中心都能参与氧化还原反应,NaFeFe(CN)6和Na2CoFe(CN)6的首周可逆容量分别为113和120mAh.g-1,且循环性能比较稳定.由于这类结构中Ni离子不能参与氧化还原反应,Na2NiFe(CN)6的可逆容量仅为64 mAh.g-1,但循环性能非常优异.本工作的初步结果证明了普鲁士蓝类化合物具有良好的钠离子脱嵌能力,有望成为一类价格低廉、环境友好的钠离子电池正极材料.     

有序介孔碳负载Fe、Co、Ni纳米晶的软模板合成及其表征

报道了在有序介孔碳基体中一步合成负载Fe、Co、Ni纳米晶的方法. 以间二苯酚和甲醛为碳源, F127为模板剂, Fe、Co、Ni的硝酸盐为前驱体, 通过软模板组装路线在酸性条件下合成了负载型有序介孔碳复合材料. 采用X射线衍射(XRD)、透射电镜(TEM)和氮气吸附等手段对所合成材料进行了表征. 结果表明: 合成的材料具有类似于SBA-15的有序介孔结构, 有序介孔碳负载Fe、Co、Ni纳米晶复合材料的比表面积分别为586、626和698 m²·g^-1. XRD和TEM表征结果证实了金属物种以高分散纳米晶的形式分布在介孔碳基体中.     

Sorption of nickel and cobalt ions onto cobalt and nickel ferrites

The corrosion of the metal parts in the primary circuit of pressurized water reactors leads to the release of colloidal particles (NiFe(2)O(4), CoFe(2)O(4), NiO, Ni...) and ionic species (Co, Ni, Cr...). Particles can interact with ionic species in the primary medium, contributing to their transport and to their deposition onto surfaces outside the neutron flux generating radioactive contamination. Sorption and zetametry experiments at 25 °C were performed on the Ni(2+)/CoFe(2)O(4) and Co(2+)/NiFe(2)O(4) systems in order to determine the behaviour of corrosion products in the fluid of the primary circuit. Sorption appears as surface complexation starting from pH 6 and is followed by precipitation of hydroxide above pH 7.5. Complexation and solubility constants were obtained from the modelling of sorption curves. The two oxide systems present a very similar sorption behaviour, but some differences, due to their different isoelectric points, could be observed on zetametric measurements.     

Dithiolato-bridged dinuclear iron-nickel complexes [Fe(CO)2(CN)2(mu-SCH2CH2CH2S)Ni(S2CNR2)]- modeling the active site of [NiFe] hydrogenase

[NiFe] hydrogenase, the enzyme of which catalyzes the reversible oxidation of molecular hydrogen to protons and electrons, contains a unique heterodinuclear thiolate-bridged Ni-Fe complex in which the iron center is coordinated by CO and CN. We have synthesized dithiolate-bridged Ni-Fe complexes bearing CO and CN ligands to model the active center of [NiFe] hydrogenase. The Ni-Fe complexes containing a [(CN)2(CO)2Fe(mu-S2)NiS2] framework are the closest yet structural models of [NiFe] hydrogenase.     

Nickel ferrite spinel as catalyst precursor in the dry reforming of methane:Synthesis,characterization and catalytic properties

Dry reforming of methane by CO2 using nickel ferrite as precursor of catalysts was investigated.Nickel ferrite crystalline particles were prepared by coprecipitation of nitrates with NaOH or ammonia followed by calcination,or by hydrothermal synthesis without calcination step.The textural and structural properties were determined by a number of analysis methods,including X-ray diffraction (XRD),Raman spectroscopy and X-ray photoelectron spectroscopy (XPS),among which X-ray diffraction (XRD) was at room and variable temperatures.All synthesized oxides showed the presence of micro or nanoparticles of NiFe2O4 inverse spinel,but Fe2O3 (hematite) was also present when ammonia was used for coprecipitation.The reducibility by hydrogen was studied by temperature-programmed reduction (TPR) and in situ XRD,which showed the influence of the preparation method.The surface area (BET),particle size (Rietveld refinement),as well as surface Ni/Fe atomic ratio (XPS) and the behavior upon reduction varied according to the synthesis method.The catalytic reactivity was investigated using isopropanol decomposition to determine the acid/base properties.The catalytic performance of methane reforming with CO2 was measured with and without the pre-treatment of catalysts under H2 in 650-800 C range.The catalytic conversions of methane and CO2 were quite low but they increased when the catalysts were pre-reduced.A significant contribution of reverse water gas shift reaction accounted for the low values of H2 /CO ratio.No coking was observed as shown by the reoxidation step performed after the catalytic reactions.The possible formation of nickel-iron alloy observed during the study of reducibility by hydrogen was invoked to account for the catalytic behavior.     

The effect of transition metals on the structure of h-BN intercalation compounds

In this study, hexagonal boron nitride (h-BN) were synthesized by the modified O’Connor method in the presence of various metal nitrates [M(NO₃)_x, M=Cr, Mn, Fe, Co, Ni, Cu, Zn, and Ag]. The composites were analyzed by FTIR, XRF, XRD, and SEM techniques. XRD results indicated a change in the interlayer spacing due to the intercalation of Cr, Mn, Fe and Ag. SEM analyses illustrated the grain growth upon metal intercalation even at a temperature of 1320 K.     

Ni-Fe-Al-O双金属催化剂在生物质基2-羟基四氢吡喃还原胺化合成5-氨基-1-戊醇中的性能研究北大核心CSCD

采用共沉淀法制备了不同Fe/Ni摩尔比(0、0.125、0.25、0.5和0.75)的Al_(2)O_(3)负载型NiFe单、双金属催化剂,并考察了它们在生物糠醛衍生2-羟基四氢吡喃(2-HTHP)还原胺化合成高附加值5-氨基戊醇反应中的催化性能.研究发现当Fe/Ni摩尔比为0.25时表现出最高的5-氨基戊醇收率(在80℃和2 MPa优化条件下达90%).利用N_(2)吸脱附、X射线衍射(XRD)、氢气程序升温还原(H_(2)-TPR)、透射电镜(TEM)等技术对催化剂进行了表征,结果表明适量Fe的掺入可以提高催化剂的分散性和还原性,同时在还原活化催化剂中形成Ni-Fe合金相,继而使相应催化剂表现出更优异的催化活性.通过固定床对比考察了催化剂的稳定性,NiFe(0.25)-Al-O双金属催化剂表现出明显优于NiFe(0)-Al-O单金属催化剂的稳定性,运行120 h前者只有微弱失活而后者显著失活.对比反应后催化剂表征发现,金属Fe的修饰可以有效抑制金属活性颗粒的烧结和流失,从而显著提高其反应稳定性.     

A comparative FMR study of the reduction of Co-containing catalysts for the Fischer–Tropsch process in hydrogen and supercritical isopropanol

An in situ comparative study of the reduction of Co-containing catalysts for the Fischer–Tropsch process in hydrogen and supercritical (SC) isopropanol is performed by ferromagnetic resonance (FMR) spectroscopy. According to the FMR data, the reduction of cobalt-containing oxide particles to metal in hydrogen starts at temperatures of ~360°C, which is substantially lower than a temperature of the formation of metal particles of the active phase according to powder X-ray diffraction and differential thermogravimetry data (Т ~ 450°C). In SC isopropanol, the reduction to Co metal occurs at lower temperatures (T ~ 245°C) as compared with the reduction temperature for these catalysts in hydrogen. It is shown that the reduction in SC isopropanol can lead to the formation of superparamagnetic Co nanoparticles with a narrow particle size distribution.     

Fe/Co和Ni/Co镍黄铁矿型析氢反应电催化剂

作为析氢反应的电催化剂,富金属的过渡金属硫化物因能克服富硫金属催化剂所存在的如导电性有限和缺乏必要的纳米结构等不足,近年来受到越来越多的关注.本文介绍了具有镍黄铁矿型结构的三元富金属硫化物复合材料FexCo9-xS8和Ni_yCo_9-yS₈(x=y=0-4.5)的合成、表征及其电催化研究.首先,研究了二元钴化合物Co₉S₈中Co逐步被Fe或Ni取代直至4.5当量的变化过程.硫镍铁矿复合物中组分的变化有助于不同温度下酸性介质中的质子还原.其次,在还原电催化条件下,复合物中元素化学计量变化对其电化学活化/失活行为有决定性的影响.与Co₉S₈相比,Co缺陷复合材料表现出了更高的HER性能.Ni/Co化合物通常表现出比类似结构Fe/Co化合物更高的电催化析氢活性.     

Continuous supercritical hydrothermal synthesis: lithium secondary ion battery applications

Nanosized lithium iron phosphate (LiFePO₄) and transition metal oxide (MO, where M is Cu, Ni, Mn, Co, and Fe) particles are synthesized continuously in supercritical water at 25?C30?MPa and 400??C under various conditions for active material application in lithium secondary ion batteries. The properties of the nanoparticles, including crystallinity, particle size, surface area, and electrochemical performance, are characterized in detail. The discharge capacity of LiFePO₄ was enhanced up to 140?mAh/g using a simple carbon coating method. The LiFePO₄ particles prepared using supercritical hydrothermal synthesis (SHS) deliver the reversible and stable capacity at a current density of 0.1?C rate during ten cycles. The initial discharge capacity of the MO is in the range of 800?C1,100?mAh/g, values much higher than that of graphite. However, rapid capacity fading is observed after the first few cycles. The continuous SHS can be a promising method to produce nanosized cathode and anode materials.     

Thermal behavior of Co(II) and Ni(II) hydroxycarboxylate complexes obtained by two original synthesis methods

This paper presents a facile and rapid synthesis route of metallic Ni and Co nanocrystallites at ~150 °C in the mixture composed of the corresponding metal nitrates and 1,3-propanediol, as reducing agent. The metal oxides NiO, CoO, Co₃O₄ nanocrystallites were, also, successfully synthesized by thermal decomposition at 300 °C of the hydroxycarboxylate coordination products, obtained in the redox reaction between 1,3-propanediol and Ni(II) and Co(II) nitrates. The formation of the Ni(II) and Co(II) hydroxycarboxylate complexes depends on the diol which generates the carboxylate anion, the transition metal and the process parameters. Ni(II) and Co(II) nanocomposites were also synthesized by thermal decomposition of the complex combinations formed within the pores of the hybrid silica gels. One of the purposes of the present study was to investigate the phase constitution of the composites obtained in similar synthesis conditions, from Ni(II) and Co(II) complex combinations embedded in silica gels. These gels were submitted to various thermal treatments and the changes occurring during these treatments were described by X-ray diffraction. Thermal analysis is an excellent tool for the study of the processes implied in the formation and decomposition of the Co(II) and Ni(II) carboxylate complexes. X-ray diffraction evidenced the nanometer sized metal and/or metal oxide phases.