Blue‐light‐emitting 2,7‐carbazole‐based conjugated copolymers have been prepared by Yamamoto or Suzuki cross‐coupling reactions. By introducing highly substituted aromatic comonomers, fully soluble high‐molecular‐weight copolymers have been obtained. Moreover, these amorphous polymeric materials exhibit good thermal stability and interesting redox properties. All these features make these new conjugated polymers highly promising for the development of single‐polymer‐layer blue‐light‐emitting diodes.
Attachment of triarylamino‐functional groups at the 9‐position of 2,7‐linked carbazole polymers results in blue‐emitting materials with two independent redox processes that were attributed to the triarylamino groups and the polymer backbone, respectively. This new class of blue‐emitting conjugated polymers was prepared via a Suzuki cross‐coupling reaction and showed low turn‐on voltages in electroluminescent devices as a result of their low ionisation potentials. The photophysical, electrochemical and electroluminescent properties of these materials are discussed.
Novel poly[(fluorene)‐co‐(2,8‐dioctyldibenzothiophene‐S,S‐dioxide‐3,7‐diyl)]s were synthesized. The octyl group on the 2,8‐dioctyldibenzothiophene‐S,S‐dioxide (DOSO) unit improved the solubility of the polymers and broadened the optical band gap from 2.95 to 3.20 eV as the content of DOSO unit increases. The electroluminescence (EL) spectra of polymers show CIE coordinates around (0.16, 0.07) independent of the ratio of DOSO units in the polymers, owing to the ICT and steric hindrance dual‐function. A high efficiency of 3.1 cd · A−1 (EQE = 3.9%) was obtained with the configuration of ITO/PEDOT:PSS/polymer/Ba/Al. The results indicate that PF‐3,7DOSOs could be a promising candidate for saturated blue‐emitting polymers with spectral stability and high efficiency.
A dramatic increase in the photostability of a blue‐light‐emitting polymer, poly(9,9‐dioctylfluorene), was achieved by the addition of 5–10 nm gold nanoparticles. The optical absorption band of the gold nanoparticles was tuned to resonate the triplet exciton ground state bandgap energy of the polymer. Photo‐oxidation rate of poly(9,9‐dioctylfluorene) was effectively reduced by doping the polymer with very small amounts (≈10−6–10−5 volume fraction) of the gold nanoparticles.
Retarded photo‐oxidation in PDOF nanocomposite films with various doped gold nanoparticles. 相似文献
A new fluorene‐co‐carbazole‐based copolymer (PFCD), with a bulky peripheral dendritic carbazole pendant at the 9‐position, has been designed and synthesized through a Suzuki polycondensation reaction. The resulting copolymer exhibits desirable properties, such as excellent solubility, good thermal stability, and electrochemical properties. PFCD also shows efficient blue light‐emitting properties with excellent color purity and high photoluminescent quantum yield. The results of the photophysical properties indicate that the large side dendron with peripheral carbazole groups can not only efficiently suppress the π‐stacking of polymer chains but also raise the HOMO level of the resulting polymer material. Thus, PFCD is expected to be a promising pure blue light‐emitting material and further experiments on electroluminescent properties, film morphology, and aggregation behaviors are in progress.
Summary: Due to its capability of dispensing very small volumes of different liquids in a controlled manner, ink‐jet printing is well suited for combinatorial experiments. The multi‐nozzle ink‐jet delivery system is especially advantageous for parallel chemical synthesis of different materials. We have used ink‐jet printing of an oxidizing agent to pattern a pre‐coated conducting polymer, poly(3,4‐ethylenedioxy)‐thiophene‐poly(styrene sulfonate) (PEDOT‐PSS), yielding electrodes with predefined shapes and a controlled degree of sheet resistivity for use in gray‐scale organic light‐emitting devices (OLEDs). The electrical and optical properties of the PEDOT‐PSS layer are modified via chemical interaction using the oxidizing agent. These experiments were performed using a desktop ink‐jet printer in conjunction with common graphic software which employed color functions such as CMY (cyan, magenta and yellow), HSL (hue, saturation and luminosity) and RGB (red, green and blue).
Photographs of gray‐scale OLEDs patterned on PEDOT‐PSS surfaces by an ink‐jet printer on plastic substrates. 相似文献
Hole‐transporting polymers based on polyethene‐triphenylamine derivatives are investigated with respect to their UV/Vis spectra. Two substituents, N‐phenyl‐1‐naphthylamine and carbazole, are examined as their respective polymer light‐emitting diodes (PLEDs) show very different luminous efficiencies. In order to identify the origin of these phenomena electronic structure calculations based on TD‐DFT were performed using monomer models of the hole‐transporting polymers. In experiment these hole‐transporting polymers show very specific differences in their absorption and emission (fluorescence and phosphorescence) spectra. The analysis of the simulated absorption and emission spectra, the MOs as well as the ground and excited state geometries give explanations for the different optical performances of the corresponding PLEDs.
Poly(cyclooctene)s with pendant Alq3 and fac‐Ir(ppy)3 were synthesized. Carbazole‐based comonomers were used to increase the solubility of the polymers and to transfer the energy into metal complexes. Excitation spectra of all polymers provided evidence of energy transfer. We established that the polymer backbone does not interfere with the optical properties of the metal complexes. All copolymers retained the optical properties of their small molecule metal complex analogs in solution and the solid state, making these polymers promising materials for potential electro‐optical applications.
Fast‐degrading, salicylate‐based poly(anhydride‐esters) were designed to degrade and release the active component, salicylic acid (SA), within 1 week. The polymer degradation was enhanced by using shorter or oxygen‐containing aliphatic chains. A copolymer of diglycolic acid was also made with a salicylate‐based diacid for comparison of polymer properties, including SA release. Both methods resulted in polyanhydrides with molecular weights ranging from 14 500 to 27 800 Da and displayed glass transition temperatures near physiological conditions, namely 33–40 °C. The homo‐ and copolymers completely degraded within one week releasing the chemically incorporated SA.
Deposition of hole injection layers including a perfluorinated ionomer has been demonstrated using layer‐by‐layer spin self‐assembly for enhanced device efficiency and lifetime in PLEDs. We show that the LBL spin self‐assembled thin films enable to control work functions of indium‐tin oxide anodes by changing the PFI concentration and that a resulting green‐emitting device has an enhanced luminescence efficiency and 18 times longer half lifetime than a device using a conventional HIL. We also fabricate a gradient of energy levels by the LBL self‐assembly of the PFI that results in a work function of 5.74 eV, which can be used to improve carrier injection even for an emitting layer whose ionization potential is over 5.7 eV.
Reactions between the ethylene groups in the backbone of conjugated polymers under UV illumination and heat treatment result in the cross‐linking of the main polymer chains. The cross‐linking leads to two simultaneous results in the polymer: excellent solvent resistance and increased bandgap. Using this reaction, three‐color polymer light‐emitting diodes (PLEDs) with a multi‐layer structure can be easily realized by a dry photo‐pattern in an active‐gas‐free environment. Multi‐layer blue devices with dramatically enhanced efficiency can also be achieved conveniently.
A series of starburst materials ( T1 – T3 ) based on a pyrene core with four oligofluorene arms of different length have been synthesized and characterized. The starburst materials show good film forming ability and sky blue fluorescence. Electroluminescent devices take on a stable blue emission and the device performance increases with an increase in arm length. The single‐layered device made of T3 has a maximum brightness of over 2 700 cd · m−2 and a maximum current efficiency of 1.75 cd · A−1, which is among the best in starburst material devices. The morphology of T1 – T3 has been studied by atomic force microscopy. The starburst oligofluorenes with different arm lengths show a distinctive texture, which indicates the size dependent morphology of the starburst materials.
Summary: The photo‐crosslinking of carbazole dendrimers was analyzed by UV and IR spectroscopic methods. Photoirradiation results in the formation of a film that is insoluble in toluene and benzene. Time‐of‐flight mass spectrometry studies revealed that the photoirradiation lead to an oligomerization of the dendrimer through crosslinking. The resulting insoluble dendrimer film could be applied as a hole‐transport layer in efficient polymer electroluminescence devices (PLEDs).
Luminance‐voltage characteristics for PLEDs wherein PEDOT:PSS and CbzG3 complex with SnCl2 were employed as the hole transport layer (ITO/HTL/EML/Ca/Ag). 相似文献
Summary: Defined films of luminescent ruthenium(II ) polypyridyl‐poly(methyl methacrylate) (PMMA) and iridium(III ) polypyridyl‐polystyrene (PS) copolymers could be prepared by ink‐jet printing. The copolymers were deposited on photoresist‐patterned glass substrates. Films as thin as 120 nm could be printed with a roughness of 1 to 2%. In addition, the film thickness could be varied in a controlled way through the number of droplets deposited per unit area. The topography of the ink‐jet printed films was analyzed utilizing an optical profilometer. The absorbance and emission spectra were measured using fast parallel UV‐vis and fluorescence plate reader.
Photo of the solutions of luminescent ruthenium (left) and iridium (right) containing polymers in a glass microtiter plate (top). The subsequently prepared films using ink‐jet dispensing techniques are shown below. 相似文献
A novel organic hyperbranched copper phthalocyanine was synthesized for use as a hole injection nanolayer on ITO in organic light‐emitting diodes (OLEDs). This material is soluble in organic solvents which allows for processing under anhydrous conditions, unlike water based conventional polymer hole injection layer materials such as poly(3,4‐ethylenedioxythiophene)(PEDOT)/polystyrene sulfonate (PSS). The hyperbranched layer increased the luminous efficiency and brightness of single layer OLED devices, in addition to reducing current leakage which causes crosstalk in panel devices, compared to devices prepared from PEDOT/PSS. Therefore, this material is more suitable for OLED applications due to its processing and performance advantages over conventional commercial conducting polymer compositions.
Summary: Photo‐crosslinkable PF‐b‐PCEA triblock copolymers have been successfully synthesized by an end‐capped Yamamoto reaction and further atom transfer radical polymerization. The copolymer film on a glass substrate could be selectively photo‐crosslinked using 365 nm UV radiation and a mask with a standard photopattern process. Elaborate and complex pixel structures are easily obtained, which may be applied to fabricate pixelated matrix displays and large area displays in the future. Furthermore, the crosslinked PF‐b‐PCEA film shows better stability under thermal stress and UV irradiation than the homopolymer, which indicates that the block copolymers could have a longer lifetime and stability when they are used in OLED fabrication. The optical properties and conversion of the photo‐responsive group are also investigated by various methods and confirm the photo‐responsive property. The corresponding results show that many other types of photo‐crosslinkable light‐emitting materials can be conveniently and efficiently obtained by this method.
“Fudan university badge” feature obtained by photolithography. 相似文献
A polymer system based on polydiacetylene (PDA) supramolecules that emits red, green, and blue fluorescence has been constructed. The three‐color emitting system is comprised of red‐fluorescent PDA vesicles in which green‐fluorescent fluorescein molecules are encapsulated. Finally, the blue‐fluorescence component is introduced by reacting terminal amine groups on the PDA vesicle surfaces with fluorescamine. Thin PDA‐polymer‐containing poly(vinyl alcohol) films formed by using this strategy display red, green, and blue fluorescence upon excitation with light at specific wavelengths.
Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO113‐b‐PDMA82) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.
Summary: The synthesis and thermal, redox and photoluminescence properties of a soluble donor‐acceptor polyplatinayne with the electron‐accepting silole ring and its model compound are described. The polymer has an optical band gap of 2.10 eV which is much lower than that of thienyl‐ or silyl‐bridged congeners. The incorporation of electron‐accepting silole unit in the metallopolymer main chain creates a new π‐conjugated system that features unique donor‐acceptor characteristics.
Several pyrene‐based polyphenylene dendrimers (PYPPDs) with different peripheral chromophores (PCs) are synthesized and characterized. Deep blue emissions solely from the core are observed for all of them in photoluminescence spectra due to good steric shielding of the core and highly efficient surface‐to‐core Förster resonant energy transfers (FRETs). Device performances are found in good correlation with the energy gaps between the work function of the electrodes and the frontier molecular orbital (FMO) levels of the PCs. Pure blue emission, luminance as high as 3700 cd m−2 with Commission Internationale de l'Éclairage 1931 (CIExy) = (0.16, 0.21), and a peak current efficiency of 0.52 cd A−1 at CIExy = (0.17, 0.20) are achieved. These dendrimers are among the best dendritic systems so far for fluorescent blue light‐emitting materials.
