POSS‐functionalized polyisobutylenes (PIBs) were synthesized by carbocationic polymerization using an epoxy‐POSS/TiCl4 initiating system in hexane/methyl chloride (60:40 v/v) solvent mixture at −80 °C. 1H NMR spectroscopy verified the incorporation of one epoxy‐POSS per polymer chain. Light scattering and TEM analysis demonstrated the formation of 50–100 nm sized aggregates and micron‐sized clusters.
Spherical polyelectrolyte brushes consisting of a magnetite/polystyrene nanocomposite core and a poly(acrylic acid) brush shell were prepared by photo‐emulsion polymerization. They are narrowly dispersed, superparamagnetic and redispersible after aggregating by external magnetic field, as determined by transmission electron microscopy, dynamic light scattering, thermal gravimetric analysis and a vibrating sample magnetometer. Magnetic control is thus introduced into nano‐sized spherical polyelectrolyte brushes to achieve recovery and controllable delivery in applications. This approach opens up the way for cost‐effective applications of spherical polyelectrolyte brushes.
The use of decatungstate in combination with silanes to generate silyl radicals under green fluorescence bulb irradiation as well as sunlight exposure is described. The mechanisms are investigated by ESR and laser flash photolysis experiments. The high potential of this reaction is evidenced here when using a decatungstate/silane/diphenyl iodonium salt combination as an initiating system for the ring opening photopolymerization of epoxides.
While network‐like assemblies are formed by amphiphilic polyphosphazenes with poly(N‐isopropylacrylamide) and ethyl tryptophan as side groups in aqueous solution, a significant morphology transformation is observed when small molecules that exhibit hydrogen‐bonding interactions with amphiphilic copolymers are introduced during the preparation of polymeric assemblies through a dialysis procedure. Depending on copolymer composition and the content of small molecules introduced, aggregates ranging from general vesicles, high‐genus vesicles, to well‐defined nanospheres can be prepared successfully as clearly evidenced by TEM observation, which suggests this procedure should be a novel approach to prepare composite vesicles.
Spherical single‐chain‐particles of poly(N‐isopropylacrylamide) were prepared in aqueous solution above the lower critical solution temperature upon the addition of sodium dodecyl sulfate. The size of the single‐chain‐particles was investigated by means of transmission electron microscopy and viscosity measurements of the corresponding solutions, indicating the absence of inter‐chain entanglements among the single‐chain‐particles.
Schematic of the preparation of PNIPAM single‐chain‐globules in solution. 相似文献
Polyimide/diamond nanocomposites have been synthesized from 4,4′‐diaminodiphenyl ether (ODA) and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA). All the polyimides show non‐crystalline X‐ray diffraction. The frequent occurrence of particular interatomic distances (R) denoted by the non‐crystalline X‐ray diffraction maxima are determined. An ultramicro‐indentation technique is employed to evaluate the effects of nano‐diamond particles on the indentation behavior of polyimides. Indentation size effect is observed and discussed.
Summary: A novel experimental set‐up has been devised to measure simultaneously, in real time, the conversion and shrinkage of multi‐acrylates during photopolymerization. The data show that the current practice of assigning the excess volume entirely as excess free volume is inappropriate as this leads to an increasing fractional free volume with conversion. We propose to partition the excess volume into free and occupied volume components. The new model produces satisfactory results.
Experimental set‐up for the simultaneous collection of shrinkage and conversion data. 相似文献
A novel phenylacetylene ( 1 ) having two hydroxyl groups and a chiral pinanyl group together with the other three related phenylacetylenes has been synthesized and (co)polymerized by using an achiral catalytic system. Among the four monomers, only 1 is suitable to the asymmetric‐induced polymerization ( AIP ). Chiral amplification phenomenon is only observed in the copolymerization of 1 with an achiral phenylacetylene having two hydroxyl groups ( 3 ). The tight helical cis‐cisoidal main chain formed by making intramolecular hydrogen bonds between the hydroxyl groups in the copoly( 1 / 3 ) enhances the efficiency of chiral induction and as a result chiral amplification phenomenon is observed during the copolymerization.
The synthesis of primary amine end‐functional poly(tert‐butyl acrylate)s has been achieved by using the Gabriel reaction. Polymerization of tert‐butyl acrylate was first achieved by atom transfer radical polymerization using ethyl‐2‐bromoisobutyrate or paramethoxyphenyl‐2‐bromoisobutyrate as initiator. Both resulting polymers, with a bromide‐end atom, were converted into phthalimido intermediates which then were successfully hydrolyzed using potassium hydroxide in tert‐butyl alcohol to result in poly(tert‐butyl acrylate)s terminated by a primary amine function. End group interconversions were followed by 1H NMR, FT‐IR, and MALDI‐TOF MS measurements. All the results proved that quantitative transformations were achieved at each step. Moreover, the method developed is very easy to carry out.
The mixed Langmuir monolayers and Langmuir–Blodgett (LB) films of homo‐polystyrene (h‐PS) and the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) have been characterized by the Langmuir monolayer technique and tapping mode atomic force microscopy (AFM), respectively. When the content of h‐PS is below 80 wt.‐%, the mixed LB films of h‐PS/PS‐b‐P2VP mainly exhibit isolated circular nanoaggregates. With a further increase of the h‐PS content (80–95%), however, highly uniform and stable necklace‐network structures are observed in the mixed LB films.
Poly(para‐phenylene vinylene) (PPV) and its derivatives are important semiconducting polymers for organic electronics. Herein, an alkene metathesis approach to obtain PPVs is reported. Tri(iso propyl)silyl‐substituted norbornadienes are employed as solubilizing agents. As PPV precursors divinylbenzene is used for acyclic diene metathesis and paracyclophane diene for a ring‐opening metathesis polymerization‐type approach. The resulting polymers are analyzed by gel permeation chromatography (GPC), UV‐vis, fluorescence, and nuclear magnetic resonance (NMR) spectroscopy. All of the polymers show good solubility in common solvents.
A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).
A new chromophore, C1 , based on a similar DπA‐structure as in the FTC ‐chromophore but with a hydroxyalkyl spacer perpendicular to the direction of the dipole moment was synthesized. Both chromophores and the CLD ‐chromophore were used to prepare high Tg nonlinear optical vinyl polymers. The influence of the position of the spacer on the DπA‐system on the NLO response of the resulting polymers was investigated.
Resorting to ‘click chemistry’, four photochromic dendrimers, A‐Tri‐SP, B‐Tri‐SP, C‐Tri‐SP, and D‐Hex‐SP, have been synthesized facilely in sound yields of 85, 88, 94, and 80%, respectively. These dendrimers have been obtained by the straightforward coupling of azido‐attached photochromic spiropyran units to acetylenic‐terminated dendritic cores. The photochromic dendrimers show typical photochromic properties both in tetrahydrofuran solution and in poly(methyl methacrylate) film. They are demonstrated to be endowed with superior performance in comparison to the corresponding spiropyran monomer in terms of larger optical density, better stability of the open ring form, higher sensitivity towards the coordination of ferric ions, and better two‐photon absorption properties.
A new semi‐analytical approach to model simultaneous chain scission and branching is described that assumes the separation of the scission and the branching problem. The required properties of the linear segments or primary polymers forming the branched architectures are found by a kinetic model. The general rules for the construction of branched architectures from populations of linear segments then lead to an analytical expression for the branching distribution and a semi‐analytical expression for the bivariate length/branching distribution. The method is applied to the scission of an initially branched polymer and subsequent terminal branching on scission points and activated terminal double bonds. Exact agreement is found with Monte Carlo sampling results.
Summary: The microwave (MW)‐assisted lipase‐catalyzed ring‐opening polymerization of ε‐caprolactone in boiling solvents was investigated for the first time. In case of boiling toluene or benzene the MW‐assisted reaction proceeded significantly slower compared to oil bath heating. On the other hand, using boiling diethyl ether as solvent, an increase of the polymerization rate due to MW irradiation was found. Yield, molecular weight measurements, and MALDI‐TOF analysis supported the results.
Reactivity of the MW‐assisted ring‐opening polymerization of ε‐caprolactone compared with conventional thermal heating in different solvents. 相似文献
Summary: An enzymatic one‐pot procedure has been developed for the synthesis of difunctional polyesters containing terminal thiols and acrylates. Candida antarctica lipase B was used as a catalyst for the ring‐opening polymerization of ω‐pentadecalactone. The polymerization was initiated with 6‐mercaptohexanol, then terminated with γ‐thiobutyrolactone or vinyl acrylate to create two types of difunctional polyesters with a very high content of thiol‐thiol or thiol‐acrylate end‐groups.
The stability and reactivity of mono‐ and multi‐protonatred N‐substituted isatin derivatives were studied at PBE0/aug‐cc‐pvtz//PBE0/6‐31+G** level of theory in triflic acid (TFSA) solution. Calculations showed that the monocationic intermediates are the principal reactive species in the reaction of hydroxyalkylation of isatin derivatives in TFSA media. Electron‐withdrawing substituents on the nitrogen atom increase the reactivity of isatin‐containing electrophiles towards aromatic hydrocarbons, in accordance with their expected electronic influence. Steric factors also play an important role in the reactivity of isatin‐containing electrophiles, especially in the second reaction step, due to their more sterically hindered reactive center.
New multifunctional copoly(2‐oxazoline) nanoparticles were prepared for cell studies. The polymer contains double‐bond side chains as potential reaction sites for “thio”‐click reactions as well as a fluorescein label covalently bound to the polymer backbone. Using the nanoprecipitation technique, spherical nanoparticles of 200–800 nm were obtained. Confocal laser scanning microscopy measurements revealed the cellular uptake of the nanoparticles.
The synthesis of hyperbranched poly(ethylene glycol) (hbPEG) in one step was realized by random copolymerization of ethylene oxide and glycidol, leading to a biocompatible, amorphous material with multiple hydroxyl functionalities. A series of copolymers with moderate polydispersity ( < 1.8) was obtained with varying glycidol content (3–40 mol‐%) and molecular weights up to 49 800 g mol−1. The randomly branched structure of the copolymers was confirmed by 1H and 13C NMR spectroscopy and thermal analysis (differential scanning calorimetry). MTS assay demonstrated low cell toxicity of the hyperbranched PEG, comparable to the highly established linear PEG.
