DUV interferometric lithography and diblock copolymer self‐organization have successfully been combined to provide a simple and highly collective nanopatterning technique enabling the organization of nanoparticles over several orders of magnitude, from nanometre to millimetre. The nanostructural changes at the surface of the polymer film after thermal annealing have been monitored by AFM and the process parameters optimized for obtaining a long‐range organization of the lamellar domains. In particular, the impact of the annealing conditions and geometric parameters of the substrate patterns have been investigated. The nanopatterns resulting from the lamellar demixion of (PS‐b‐MMA) were used for a controlled deposition of nanoparticles. The affinity of the hydrophobic particles for the PS block was demonstrated, opening new doors towards the preparation of high‐density arrays of nanoparticles with potential applications in data storage.
Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.
Poly(2‐hydroxyethyl methacrylate)‐block‐poly(N‐isopropylacrylamide) (PHEMA‐b‐PNIPAM) was prepared by controlled surface‐initiated ATRP from silicon substrates, and the resulting block copolymers were successfully converted into the corresponding PSEMA‐b‐PNIPAM by esterification of the hydroxy groups on the PHEMA block using excess of succinic anhydride. The PSEMA‐b‐PNIPAM block copolymer brushes respond to both temperature and pH stimuli. The double‐responsive behavior of the block copolymer brushes in solution was investigated by height imaging and force–distance measurements of AFM. The results clearly show the responsive behavior of the smart block copolymer brushes.
Regioregular poly(3‐hexylthiophene) has been successfully incorporated into a novel amphiphilic block copolymer. The amphiphilic nature of poly(3‐hexylthiophene)‐block‐poly(acrylic acid) has been investigated using spectroscopic methods and has yielded solvatochromic behavior in several solvents of varying polarity. Evidence suggests that a supramolecular, long range ordering of block copolymer occurs in polar solvents, resulting in the formation of aggregates. Despite relatively large amounts of non‐conductive blocks, the poly(3‐hexylthiophene) diblock copolymer yields a high conductivity of 1 S · cm−1, and atomic force microscopy shows the formation of a highly organized nanofibrilar morphology in the solid state.
A rod‐coil block copolymer consisting of poly(3‐hexylthiophene) (P3HT) and poly(N‐vinylcarbazole) (PVK) ( P3HT‐ b ‐PVK ) in a single molecular architecture is prepared as the first example for WOLEDs. By obtaining the phase separated domains in thin film of the resulting block copolymer, it is possible to suppress energy transfer from PVK as wide bandgap units to P3HT as low bandgap blocks, yielding dual emissions for white electroluminescence with CIE coordination of (0.34, 0.33).
This paper aims to report the fabrication of biodegradable thin films with micro‐domains of cylindrical nanochannels through the solvent‐induced microphase separation of poly(L ‐lactide)‐block‐poly(ethylene glycol)‐block‐poly(L ‐lactide) (PLA‐b‐PEG‐b‐PLA) triblock copolymers with different block ratios. In our experimental scope, an increase in each of the block lengths of the PLA and PEG blocks led to both a variation in the average number density (146 to 32 per 100 µm2) and the size of the micro‐domains (140 to 427 nm). Analyses by atomic force microscopy (AFM) and fluorescence microscopy indicated that the hydrophilic PEG nanochannels were dispersed in the PLA matrix of the PLA‐b‐PEG‐b‐PLA films. We demonstrated that the micro‐domain morphology could be controlled not only by the block length of PEG, but also by the solvent evaporation conditions.
A new type of pH‐responsive block copolymer nanoparticle has been synthesized and characterized. The amphiphilic diblock copolymer, PEG‐b‐PMYM, contains acid‐labile ortho ester side‐chains in the hydrophobic block and can self‐assemble into micelle‐like nanoparticles in water at neutral pH. Hydrolysis of the ortho ester side‐chains follows a distinct exocyclic mechanism and shows pH‐dependent kinetics, which triggers changes in nanoparticle size and morphology. The nanoparticles have been found to be non‐toxic to cells in vitro. The ability to tune the size and morphology of biocompatible block copolymer nanoparticles by controlling the pH‐sensitive side‐chain hydrolysis represents a unique approach that may be exploited to improve the efficacy of nanometer‐scale drug delivery.
RAFT inverse miniemulsion polymerization is demonstrated for the first time as an alternate way to synthesize hydrophilic polymer latexes. The kinetic behavior of inverse RAFT miniemulsion polymerization of acrylamide is similar to that observed in aqueous RAFT solution polymerization. A water‐soluble initiator provides better control than a lipophilic initiator in inverse RAFT miniemulsion polymerization under the conditions used here.
We prepared new varied diblock copolymers by ring‐opening metathesis polymerization of functionalized norbornenes and cyclooctene in the presence of Schrock‐type initiators, either [Mo(CHCMe2Ph)(N‐2,6‐iPr2Ph)(OCCH3(CF3)2)2] or [Mo(CHCMe2Ph)(N‐2,6‐iPr2Ph)(OC(CH3)3)2]. The block copolymers were microphase separated and presented the individual phases of each polymer block constituent, that were amorphous/amorphous, amorphous/semicrystalline, or semicrystalline/liquid‐crystalline. One example of such a block copolymer is shown.
We present a computer study of the association behavior of copolymer chains with a gradient part and soluble tail of variable length. As a simulation method we use dynamic Monte Carlo simulation on a simple cubic lattice with pair interaction parameters. The solvent quality and selectivity is modeled by the variation of pair interaction parameters between nearest neighbors on the lattice. The role of the length of soluble part in the self‐assembly and its effect on the structure of aggregates was the main goal of this work. The size and structure of aggregates were analyzed using an improved topological classification method which has been developed and tested in the present study. The structure and association numbers of aggregates were compared with those of linear diblock copolymers.
Photoinduced microphase separation in block copolymers (BCP) was achieved for the first time, using a rationally designed diblock copolymer composed of two side‐chain liquid crystalline polymers (SCLCP). The miscibility of the two blocks was promoted by the miscibility between the two types of mesognic side groups, while upon UV exposure inducing the trans–cis isomerization of azobenzene mesogens on one SCLCP, the shape incompatibility of bent cis isomers with an ordered liquid crystalline phase drove the separation of the two blocks resulting in a microphase separated morphology. This result shows the perspective of using light to process and organize BCP morphology and related nanostructures in a lithography‐free manner.
Summary: A novel ABC triblock copolymer with a rigid‐rod block was synthesized by atom transfer radical polymerization (ATRP). First, a poly(ethylene oxide) (PEO)‐Br macroinitiator was synthesized by esterification of PEO with 2‐bromoisobutyryl bromide, which was subsequently used in the preparation of a poly(ethylene oxide)‐block‐poly(methyl methacrylate) (PEO‐b‐PMMA) diblock copolymer by ATRP. A poly(ethylene oxide)‐block‐poly(methyl methacrylate)‐block‐poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (PEO‐b‐PMMA‐b‐PMPCS) triblock copolymer was then synthesized by ATRP using PEO‐b‐PMMA as a macroinitiator.
ABC triblock copolymer with a rigid‐rod block. 相似文献
Two kinds of cyclodextrin/peptide (CD/peptide) hybrids bearing ZnII‐cyclen or cyclen, dansyl and β‐cyclodextrin (β‐CD) units have been synthesized as chemosensors for organic anionic molecules. ZnII‐cyclen serves as a ligand site and β‐CD is a receptor site for guest molecules, while the dansyl unit acts as a fluorescent probe. Examination of the fluorescence behaviors of these CD/peptides suggest that the hybrid containing Zn2+ has larger binding constants with respect to anionic molecules than that without Zn2+.
Blends of polystyrene/poly(methyl methacrylate) (PS/PMMA) (30/70) prepared by simple melt mixing form a droplet (PS) in‐matrix (PMMA) morphology. It is found that addition of a carefully designed copolymer PS‐b‐P(S‐ran‐MMA) (SSM) compatibilizer could convert the morphology into a co‐continuous system. Indeed, the continuity of the dispersed PS phase increased with an increase in PS‐b‐P(S‐ran‐MMA) content, and a fully co‐continuous morphology (continuity = 100%) was obtained at 20% SSM fraction with a characteristic size of 100 nm.
Summary: A diblock copolymer brush consisting of poly(methyl acrylate)‐block‐poly(pentafluoropropyl acrylate) (Si/SiO2//PMA‐b‐PPFA) was synthesized on a porous silica substrate. The brush was exposed to selective solvents, as well as thermal treatments, to induce a surface rearrangement. The rearrangement resulted in the selective loss or creation of an ultrahydrophobic layer by location of the fluoropolymer segment. This work demonstrates that surface rearrangements observed on flat surfaces can be transferred to porous substrates.
Image of a water droplet in contact with an Si/SiO2//PMA‐b‐PPFA ultrahydrophobic polymer brush, synthesized from a porous silica substrate. 相似文献
Hierarchical nanoporous structures are fabricated by adsorption of micelles of diblock copolymer‐templated Au‐nanoparticles onto a hydrophilic solid substrate. Gold nanoparticles are prepared using micelles (19 nm) of polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) as nanoreactors. Deposition of thin films of the micellar solution, modified with a non‐selective solvent (THF), on hydrophilic surfaces leads to the formation of hierarchical nanoporous morphologies. The thin films exhibit two different pore diameters and a total pore density of 15 × 108 holes per cm2. The structure was analyzed in terms of topography and chemical composition using AFM, TEM and XPS measurements. The PS‐b‐P4VP template was subsequently removed by oxygen plasma etching, to leave behind metallic nanopores that mimic the original thin film morphology.
The formation of integral asymmetric membranes from ABC triblock terpolymers by non‐solvent‐induced phase separation is shown. They are compared with the AB diblock copolymer precursors. Triblock terpolymers of polystyrene‐block‐poly(2‐vinylpyridine)‐block‐poly(ethylene oxide) (PS‐b‐P2VP‐b‐PEO) with two compositions are investigated. The third block supports the formation of a membrane in a case, where the corresponding diblock copolymer does not form a good membrane. In addition, the hydrophilicity is increased by the third block and due to the hydroxyl group the possibility of post‐functionalization is given. The morphologies are imaged by scanning electron microscopy. The influence of the PEO on the membrane properties is analyzed by water flux, retention, and dynamic contact angle measurements.
Summary: The influence of surface morphologies on the properties of materials is of essential importance and is therefore a widely discussed topic. In the present contribution, the properties of a set of diblock copoly(2‐oxazoline)s are analyzed in terms of their individual morphologies, which have been investigated with tapping‐mode SFM. This collection of diblock copolymers consists of 12 diblock copolymers and four corresponding homopolymers, representing a complete 16‐membered library of (co‐) poly(2‐oxazoline)s, composed of four differently substituted 2‐oxazoline monomers. For the investigated set of compounds, a correlation between the morphologies of the spin‐coated films and their surface energies could be determined.
Morphologies of spin‐coated films of a library of diblock copoly(2‐oxazoline)s and their correlation to the corresponding surface energies. 相似文献
Polymer‐encapsulated silver nanoparticles were synthesized and sterically stabilized by a new core‐shell type system consisting of poly(S‐alt‐MA)‐graft‐PMMA copolymer that acts as a scaffold for the synthesis of size confined nanoparticles. The graft copolymer is synthesized via ambient temperature ATRP using the CuBr/PMDETA catalytic system at ambient temperature. The graft copolymer is hypothesized to function as a scaffold with the anhydride part interacting strongly with the silver ions, while the PMMA graft functions as a polymer brush that stabilizes the dispersion and prevents the particle aggregation due to a ‘polymer brush effect’. UV absorption and TEM studies confirm that the synthesized silver composite particles have a core‐shell structure.
Summary: The integration of gradients of enzyme activity in microstructured biosensor arrays enables intrinsic on‐line quality control of biosensor performance. Multiple sensor elements with different compositions and hence varying responses for the same analyte are evaluated as a basis for improving data reliability. The formation of glucose oxidase/polymer microstructures using a piezo microdispenser and their examination by scanning electrochemical microscopy (SECM) are used to demonstrate the feasibility of this approach.
Optical microscope image of grids obtained by dispensing of 1 mg/mL GOx and 2 mg/mL Vinnapas® mixture. 相似文献
