Non‐Radiative Energy Transfer Mediated by Hybrid Light‐Matter States

We present direct evidence of enhanced non‐radiative energy transfer between two J‐aggregated cyanine dyes strongly coupled to the vacuum field of a cavity. Excitation spectroscopy and femtosecond pump–probe measurements show that the energy transfer is highly efficient when both the donor and acceptor form light‐matter hybrid states with the vacuum field. The rate of energy transfer is increased by a factor of seven under those conditions as compared to the normal situation outside the cavity, with a corresponding effect on the energy transfer efficiency. The delocalized hybrid states connect the donor and acceptor molecules and clearly play the role of a bridge to enhance the rate of energy transfer. This finding has fundamental implications for coherent energy transport and light‐energy harvesting.     

Probing Invisible,Excited Protein States by Non‐Uniformly Sampled Pseudo‐4D CEST Spectroscopy

Chemical exchange saturation transfer (CEST) NMR spectroscopy is a powerful tool for studies of slow timescale protein dynamics. Typical experiments are based on recording a large number of 2D data sets and quantifying peak intensities in each of the resulting planes. A weakness of the method is that peaks must be resolved in 2D spectra, limiting applications to relatively small proteins. Resolution is significantly improved in 3D spectra but recording uniformly sampled data is time‐prohibitive. Here we describe non‐uniformly sampled HNCO‐based pseudo‐4D CEST that provides excellent resolution in reasonable measurement times. Data analysis is done through fitting in the time domain, without the need of reconstructing the frequency dimensions, exploiting previously measured accurate peak positions in reference spectra. The methodology is demonstrated on several protein systems, including a nascent form of superoxide dismutase that is implicated in neurodegenerative disease.     

Energy Transfer and Concentration‐Dependent Conformational Modulation: A Porphyrin‐Containing [3]Rotaxane

A zinc porphyrin‐containing [3]rotaxane A was synthesized through a copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction. Energy donors and acceptor porphyrin were introduced to dibenzo[24]crown‐8 (DB24C8) and dibenzyl ammonium (DBA) units of [3]rotaxane A to understand the intramolecular energy transfer process. Investigations of the photophysical properties of [3]rotaxane A demonstrated that the intramolecular efficient energy transfer readily occurred from the donors on the wheels to the porphyrin center on the axis. The fluorescence of energy donors in the region of 400 to 450 nm was efficiently absorbed by the porphyrin acceptor under irradiation at 345 nm, and finally a red light emission at about 600 nm was achieved. Further investigation indicated that the conformation of [3]rotaxane A was self‐modulated by changing its concentration in CH₂Cl₂. The triazole groups on the wheel coordinated or uncoordinated to Zn²⁺ through intramolecular self‐coordination with the change in the concentration of [3]rotaxane A in CH₂Cl₂. Therefore, this conformational change was reversible in a non‐coordinating solvent such as CH₂Cl₂ but inhibited in a coordinating solvent such as THF. Such interesting behaviors were rarely observed in porphyrin derivatives. This self‐modulation feature opens up the possibility of controlling molecular conformation by varying concentration.     

Associated inter‐ and intrachain conformational transitions in polystyrene solutions

Understanding the conformational changes of polymeric chains in solutions is an essential and integral part of polymer physics. By increasing the concentration of polymer solutions from dilute to semidilute regime, the critical chain overlapping has been reported at the concentration termed as C*. In this study, the associated inter‐ and intrachain conformational transitions in polystyrene (PS) solutions are reported. By comparing the spectroscopic intensity ratio versus concentration for an intrachain PS system, a break point was observed in good solvent which coincided with the theoretically predicted C*. Moreover, the intrachain conformation showed no obvious change below C*, while significant collapse started to occur above C*. This result reveals a new insight in polymer physics, since traditionally the size of polymer chains is considered to decrease weakly regarding the concentration change in the semidilute regime. It is important to find such an abrupt intrachain conformational transition between the dilute and semidilute solutions and provide the first experimental observation that inter‐ and intrachain conformational transitions are correlated to one the other. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1373–1379     

Synthesis and Conformation of Three‐Dimensionally Ordered Macroporous Syndiotactic Polystyrene and Poly(p‐methyl styrene)

Three‐dimensionally ordered macroporous (3DOM) syndiotactic polystyrene (sPS) and poly(p‐methyl styrene) (sPPMS) are synthesized using silica colloidal crystal templates with varied diameters in the range of 548–214 nm, and the effect of polymerization space on the conformation of the resulting 3DOM polymers is investigated by spectroscopy and thermal analysis. In‐situ polymerizations of styrene and p‐methyl styrene within the silica templates induce the resulting 3DOM polymers with different conformations and packing of chains, which are different from those of bulk polymers prepared in the absence of templates. Polymerizations in restricted silica templates result in un‐helixication of 3DOM sPS chains and helixication of 3DOM sPPMS chains.

     

Synthesis and Solution Properties of Loose Polymer Brushes Having Polyimide Backbone and Methylmethacrylate Side Chains

Summary: Graft-copolymers with polyimide backbone and PMMA side chains are synthesized by ATRP of methylmethacrylate on the polyimide macroinitiator. The obtained copolymers, macroinitiator, and cleaved side chains are investigated by ¹H NMR, SEC, static and dynamic light scattering, sedimentation, and viscosimetry in solutions. The synthesized copolymer is relatively loose polymer brushes: the average distance between grafted PMMA chains is ∼11 nm (4 repeat units of the backbone). The hydrodynamic and conformational characteristics of graft-copolymers change on passage from ethylacetate to chloroform due to difference in the thermodynamic quality of the solvents with respect to the copolymer components. The backbone is characterized more extended conformation than individual polyimide macromolecule.     

无规聚苯乙烯在稀溶液中的急冷结晶

通常认为聚苯乙烯具有立体规整度的构型才能结晶,无规聚苯乙烯一般不能结晶。我们用液氮急冷浓度低于体积收缩浓度的无规聚苯乙烯溶液,再将溶剂在真空中升华,得到的粉末状样品含有六角晶系的多晶及单晶。这一发现对研究高分子聚集态结构有重要意义。     

White Luminescence from Multiple‐Dye‐Doped Electrospun DNA Nanofibers by Fluorescence Resonance Energy Transfer

A DNA spin‐off : Electrospinning of DNA complexes gives nanofibers with a highly ordered morphology that allows homogeneous distribution of encapsulated multiple chromophores. The emission color can be controlled by suitable choice of the donor–acceptor pair and the doping ratio. Pure white‐light emission from nanofibers is demonstrated (see picture).

     

Atom Transfer Radical Polymerization of iso‐Butyl Methacrylate in Microemulsion with Cationic and Non‐Ionic Emulsifiers

Direct atom transfer radical polymerization (ATRP) of iso‐butyl methacrylate in microemulsion has been performed successfully for the first time. ATRP was performed at 40 °C with different emulsifier systems: i) the cationic emulsifier n‐tetradecyltrimethylammonium bromide (TTAB); and ii) mixed emulsifier systems based on TTAB and the non‐ionic emulsifiers Emulgen 911 or Emulgen 931. All polymerizations proceeded in a controlled/living fashion, and the microemulsions were transparent with particle diameters less than 15 nm. The emulsifier system TTAB/Emulgen 911 exhibited better control than TTAB only. This is proposed to be caused by complex formation between Emulgen 911 in the organic phase and CuBr₂ (the deactivator), thus reducing the extent of exit of CuBr₂ to the aqueous phase. The more hydrophilic Emulgen 931 did not lead to improved control.

     

Long‐Distance Electronic Energy Transfer in Light‐Harvesting Supramolecular Polymers

The efficient collection of solar energy relies on the design and construction of well‐organized light‐harvesting systems. Herein we report that supramolecular phenanthrene polymers doped with pyrene are effective collectors of light energy. The linear polymers are formed through the assembly of short amphiphilic oligomers in water. Absorption of light by phenanthrene residues is followed by electronic energy transfer along the polymer over long distances (>100 nm) to the accepting pyrene molecules. The high efficiency of the energy transfer, which is documented by large fluorescence quantum yields, suggests a quantum coherent process.     

Monitoring Diffusion of Reptating Polymer Chains by a Direct Energy Transfer Method: A Monte Carlo Simulation

A kinetic Monte Carlo method was used to simulate the diffusion of reptating polymer chains across an interface. A time‐resolved fluorescence technique in conjunction with a direct energy transfer method was used to measure the extent of diffusion of dye‐labeled reptating polymer chains. The diffusion of donor‐ and acceptor‐labeled polymer chains between adjacent compartments was randomly generated. The fluorescence decay profiles of donor molecules were simulated at several diffusion steps to produce mixing of the polymer chains. Mixing ratios of donor‐ and acceptor‐labeled polymer chains in compartments were measured at various stages (snapshots) of diffusion. It was observed that for a given molecular weight, the average interpenetration contour length was found to be proportional to the mixing ratio. Monte Carlo analysis showed that the curvilinear diffusion coefficient is inversely proportional to the weight of polymer chains during diffusion.     

Solution behavior of polyimide‐graft‐polystyrene copolymers in selective solvents

A polyimide‐graft‐polystyrene (PI‐g‐PS) copolymer with a polyimide backbone and polystyrene side chains was synthesized by the “grafting from” method using styrene polymerization on a polyimide multicenter macroinitiator via ATRP mechanism. The side chain grafting density z = 0.86 of PI‐g‐PS is rather high for graft‐copolymers synthesized by the ATRP method. Molecular characteristics and solution behavior of PI‐g‐PS were studied in selective solvents using light scattering and viscometry methods. In all solvents, the backbone tends to avoid contact with a poor solvent. To describe the conformation and hydrodynamic properties of PI‐g‐PS macromolecules in thermodynamically good solvents for side chains and PI‐g‐PS, the wormlike spherocylinder model is used. Macromolecules of the studied graft‐copolymer are characterized by high equilibrium rigidities (Kuhn segment length >20 nm). In Θ‐conditions, PI‐g‐PS macromolecules may be modeled by a rigid prolate ellipsoid of revolution with a low asymmetry form and a collapsed backbone as the ellipsoid core. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1539–1546     

Synthesis and characterization of polyethylene‐g‐polystyrene as the compatibilizer for polypropylene/ Polystyrene blends

Polyethylene‐g‐polystyrene (PE‐g‐PS) was synthesized as a compatibilizer for polypropylene/polystyrene­(PP/PS) blends by the living radical polymerization of styrene with polyethylene‐co‐glycidylmethacrylate (PE‐co‐GMA). The compatibilizer effect of PE‐g‐PS on the morphology and thermal properties of PP/PS blends was investigated. The crystalline temperature of PP in PP/PS blends decreased with increasing PE‐g‐PS contents. Morphologies of PP/PE‐g‐PS/PS blends showed much better dispersion of each domain for higher PE‐g‐PS contents. The molecular weight of PS segment in PP/PE‐g‐PS/PS blend was increased by addition of styrene monomer during the post melt blending process where post living radical polymerization reaction proceeded. Copyright © 2003 John Wiley & Sons, Ltd.     

A 1,3‐Phenylene‐Bridged Hexameric Porphyrin Wheel and Efficient Excitation Energy Transfer along the Wheel

A 1,3‐phenylene‐bridged hexameric Zn^II porphyrin wheel was synthesized by a Suzuki–Miyaura coupling reaction through a one‐pot or a stepwise route. The hexameric wheel structure was revealed by using X‐ray diffraction analysis. The porphyrin wheel exhibits a split Soret band due to effective exciton coupling and displays efficient excitation energy transfer along the wheel. Measurements of fluorescence anisotropy decay and pump‐power‐dependent decay reveal a rapid excitation energy hopping along the wheel with a rate of 1.4 ps.     

Synthesis of Well‐Defined Polybenzamide‐block‐Polystyrene by Combination of Chain‐Growth Condensation Polymerization and RAFT Polymerization

Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.

     

Energy Transfer in Aminonaphthalimide‐Boron‐Dipyrromethene (BODIPY) Dyads upon One‐ and Two‐Photon Excitation: Applications for Cellular Imaging

Aminonaphthalimide–BODIPY energy transfer cassettes were found to show very fast (k_EET≈10¹⁰–10¹¹ s^?1) and efficient BODIPY fluorescence sensitization. This was observed upon one‐ and two‐photon excitation, which extends the application range of the investigated bichromophoric dyads in terms of accessible excitation wavelengths. In comparison with the direct excitation of the BODIPY chromophore, the two‐photon absorption cross‐section δ of the dyads is significantly incremented by the presence of the aminonaphthalimide donor [δ≈10 GM for the BODIPY versus 19–26 GM in the dyad at λ_exc=840 nm; 1 GM (Goeppert–Mayer unit)=10^?50 cm⁴ s molecule^?1 photon^?1]. The electronic decoupling of the donor and acceptor, which is a precondition for the energy transfer cassette concept, was demonstrated by time‐dependent density functional theory calculations. The applicability of the new probes in the one‐ and two‐photon excitation mode was demonstrated in a proof‐of‐principle approach in the fluorescence imaging of HeLa cells. To the best of our knowledge, this is the first demonstration of the merging of multiphoton excitation with the energy transfer cassette concept for a BODIPY‐containing dyad.