Stereoselective intramolecular cycloadditions of homochiral N-alkenoyl aryl azides

Starting from the commercially available (S)-1-phenylethylamine and l-alanine benzylester, we synthesised the homochiral N-alkenoyl aryl azides 2a–2d. The intramolecular cycloaddition of unsubstituted 2a and 2b gave enantiopure 3,3a-dihydro-1,2,3-triazolo[1,5-a][1,4]benzodiazepine-4(6H)-ones 3a, 3b, 4a and 4b, while phenyl-substituted 2c and 2d gave enantiopure 1,1a-dihydro-2H-azirino[2,1-c][1,4]benzodiazepine-4(6H)-ones 5c, 5d, 6c and 6d.     

Solvent-dependent reactivities of acyclic nitrones with β-diketones: catalyst-free syntheses of endiones and enones

Reactions of the nitrones ^?O⁺N(Me)C(H)Ar 1 (Ar=phenyl 1a, 4-methylphenyl 1b, 2,4,6-trimethylphenyl 1c, and anthracen-9-yl 1d) with the cyclic β-diketones 1,3-indandione 2 or barbituric acid 3 in CH₂Cl₂, afford the corresponding endiones 2′a–2′d or 3′a–3′d. In contrast, dimedone 4 reacts with 1a or 1b to give the endione 4′a or 4′b and the bis-adduct 4″a or 4″b. Nevertheless, reaction of 4 with 1c or 1d in CH₂Cl₂ furnishes only the endione adducts 4′c or 4′d. However, the reaction of 4 with 1a or 1b in methanol gives only 4″a or 4″b, respectively. Among acyclic β-diketones only malonic acid 7 reacts with 1a–1c. Reaction of 7 with 1a in CH₂Cl₂ forms cinnamic acid 7″a, whereas in the case of 1b, the endione 7′b and (E)-3-p-tolylacrylic acid 7″b are obtained. The nitrone 1c reacts with 7 in CH₂Cl₂ to afford the endione 7′c or with acetone yielding (E)-4-mesitylbut-3-en-2-one 8. X-ray analyses are reported for 4′c, 5, and 7″b. In addition, the calculated acidity of the hydrogen at the α-C atom is shown to correlate with the reactivity of the β-diketones with nitrones.     

Palladium complexes of P,P and P,S type bidentate ligands: Implication in Suzuki–Miyaura cross-coupling reaction

New palladium complexes of the type [PdCl₂(η²–P∩P)] (1a,1b) and [PdCl₂(η²–P∩S)] (1c,1d) have been synthesised by the reaction of PdCl₂ with P,P and P,S type bidentate ligands in 1:1 mol ratio, where, P∩P = 9,9–dimethyl-4,5-bis(diphenylphosphanyl) xanthene {Xantphos}(a) or bis(2-diphenylphosphanylphenyl)ether{DPEphos}(b); P∩S = 9,9-dimethyl-4,5-bis(diphenyl -phosphanyl) xanthenemonosulfide {Xantphos(S)}(c) or bis(2-diphenylphosphanyl phenyl) ether monosulfide {DPEphos(S)}(d). The complexes are characterized by elemental analyses, mass spectrometry, ¹H, ¹³C and ³¹P NMR spectroscopy together with the single crystal X-ray structure determination of 1a and 1d. The palladium atom in all the complexes occupies the centre of a slightly distorted square planar environment formed by a P atom, a P/S atom and two Cl atoms. The catalytic activities of 1a–1d investigated for Suzuki–Miyaura cross-coupling reactions at room temperature exhibit higher yield of the coupling products than catalysed by PdCl₂ itself. Among 1a–1d, the palladium complexes of bidentate phosphine (1a, 1b) show higher efficacy than their monosulfide analogues (1c, 1d). However, the recycling experiments with the catalysts for a selected coupling reaction between 4-bromobenzonitrile and phenylboronic acid exhibit that 1c and 1d are more efficient than 1a and 1b, which may be due to the donor effect of the P,S ligands during catalytic reaction.     

Palladium complexes of P,P and P,S type bidentate ligands: Implication in Suzuki–Miyaura cross-coupling reaction

New palladium complexes of the type [PdCl₂(η²–P∩P)] (1a,1b) and [PdCl₂(η²–P∩S)] (1c,1d) have been synthesised by the reaction of PdCl₂ with P,P and P,S type bidentate ligands in 1:1 mol ratio, where, P∩P = 9,9–dimethyl-4,5-bis(diphenylphosphanyl) xanthene {Xantphos}(a) or bis(2-diphenylphosphanylphenyl)ether{DPEphos}(b); P∩S = 9,9-dimethyl-4,5-bis(diphenyl -phosphanyl) xanthenemonosulfide {Xantphos(S)}(c) or bis(2-diphenylphosphanyl phenyl) ether monosulfide {DPEphos(S)}(d). The complexes are characterized by elemental analyses, mass spectrometry, ¹H, ¹³C and ³¹P NMR spectroscopy together with the single crystal X-ray structure determination of 1a and 1d. The palladium atom in all the complexes occupies the centre of a slightly distorted square planar environment formed by a P atom, a P/S atom and two Cl atoms. The catalytic activities of 1a–1d investigated for Suzuki–Miyaura cross-coupling reactions at room temperature exhibit higher yield of the coupling products than catalysed by PdCl₂ itself. Among 1a–1d, the palladium complexes of bidentate phosphine (1a, 1b) show higher efficacy than their monosulfide analogues (1c, 1d). However, the recycling experiments with the catalysts for a selected coupling reaction between 4-bromobenzonitrile and phenylboronic acid exhibit that 1c and 1d are more efficient than 1a and 1b, which may be due to the donor effect of the P,S ligands during catalytic reaction.     

Structural diversity and versatility for organoaluminum complexes supported by mono- and di-anionic aminophenolate bidentate ligands

The present contribution describes the synthesis and structural characterization of structurally diverse organoaluminum species supported by variously substituted aminophenolate-type ligands: these Al complexes are all derived from the reaction of AlMe₃ with aminophenols 2-CH₂NH(R)-C₆H₃OH (1a, R = mesityl (Mes); 1b, R = 2,6-di-isopropylphenyl (Diip)) and 2-CH₂NH(R)-4,6-^tBu₂-C₆H₂OH (1c, R = Mes; 1d, R = Diip). The low temperature reaction of AlMe₃ with 1a–b readily affords the corresponding Al dimeric species [μ-η¹,η¹-N,O-{2-CH₂NH(R)-C₆H₄O}]₂Al₂Me₄ (2a–b), consisting of twelve-membered ring aluminacycles with two μ-η¹,η¹-N,O-aminophenolate units, as determined by X-ray crystallographic studies. Heating a toluene solution of 2a (80 °C, 3 h) affords the quantitative and direct formation of the dinuclear aluminium complex Al[η²-N; μ,η²-O-{2-CH₂N(Mes)-C₆H₄O}](AlMe₂) (4a) while species 2b, under the aforementioned conditions, affords the formation of the Al dimeric species [η²-N,O-{2-CH₂N(Dipp)-C₆H₄O}AlMe]₂ (3b), as deduced from X-ray crystallography for both 3b and 4a. In contrast, the reaction of bulky aminophenol pro-ligands 1c–d with AlMe₃ afford the corresponding monomeric Al aminophenolate chelate complexes η²-N,O-{2-CH₂NH(R)-4,6-^tBu₂-C₆H₂O}AlMe₂ (5c–d; R = Mes, Diip; Scheme 3) as confirmed by X-ray crystallographic analysis in the case of 5d. Subsequent heating of species 5c–d yields, via a methane elimination route, the corresponding Al-THF amido species η²-N,O-{2-CH₂N(R)-4,6-^tBu₂-C₆H₂O}Al(Me)(THF) (6c–d; R = Mes, Diip). Compounds 6c–6d, which are of the type {X₂}Al(R)(L) (L labile), may well be useful as novel well-defined Lewis acid species of potential use for various chemical transformations. Overall, the sterics of the aminophenol backbone and, to a lesser extent, the reaction conditions that are used for a given ligand/AlMe₃ set essentially govern the rather diverse “structural” outcome in these reactions, with a preference toward the formation of mononuclear Al species (i.e. species 5c–d and 6c–d) as the steric demand of the chelating N,O-ligand increases.     

Structural diversity and versatility for organoaluminum complexes supported by mono- and di-anionic aminophenolate bidentate ligands

The present contribution describes the synthesis and structural characterization of structurally diverse organoaluminum species supported by variously substituted aminophenolate-type ligands: these Al complexes are all derived from the reaction of AlMe₃ with aminophenols 2-CH₂NH(R)-C₆H₃OH (1a, R = mesityl (Mes); 1b, R = 2,6-di-isopropylphenyl (Diip)) and 2-CH₂NH(R)-4,6-^tBu₂-C₆H₂OH (1c, R = Mes; 1d, R = Diip). The low temperature reaction of AlMe₃ with 1a–b readily affords the corresponding Al dimeric species [μ-η¹,η¹-N,O-{2-CH₂NH(R)-C₆H₄O}]₂Al₂Me₄ (2a–b), consisting of twelve-membered ring aluminacycles with two μ-η¹,η¹-N,O-aminophenolate units, as determined by X-ray crystallographic studies. Heating a toluene solution of 2a (80 °C, 3 h) affords the quantitative and direct formation of the dinuclear aluminium complex Al[η²-N; μ,η²-O-{2-CH₂N(Mes)-C₆H₄O}](AlMe₂) (4a) while species 2b, under the aforementioned conditions, affords the formation of the Al dimeric species [η²-N,O-{2-CH₂N(Dipp)-C₆H₄O}AlMe]₂ (3b), as deduced from X-ray crystallography for both 3b and 4a. In contrast, the reaction of bulky aminophenol pro-ligands 1c–d with AlMe₃ afford the corresponding monomeric Al aminophenolate chelate complexes η²-N,O-{2-CH₂NH(R)-4,6-^tBu₂-C₆H₂O}AlMe₂ (5c–d; R = Mes, Diip; Scheme 3) as confirmed by X-ray crystallographic analysis in the case of 5d. Subsequent heating of species 5c–d yields, via a methane elimination route, the corresponding Al-THF amido species η²-N,O-{2-CH₂N(R)-4,6-^tBu₂-C₆H₂O}Al(Me)(THF) (6c–d; R = Mes, Diip). Compounds 6c–6d, which are of the type {X₂}Al(R)(L) (L labile), may well be useful as novel well-defined Lewis acid species of potential use for various chemical transformations. Overall, the sterics of the aminophenol backbone and, to a lesser extent, the reaction conditions that are used for a given ligand/AlMe₃ set essentially govern the rather diverse “structural” outcome in these reactions, with a preference toward the formation of mononuclear Al species (i.e. species 5c–d and 6c–d) as the steric demand of the chelating N,O-ligand increases.     

Microwave assisted synthesis of 3-benzazepin-2-ones as building blocks for 2,3-disubstituted tetrahydro-3-benzazepines

Microwave assisted condensation of primary amines with keto acids 1a–c provided directly 3,4-disubstituted 1,3-dihydro-3-benzazepin-2-ones 2. Whereas small amine size, such as NH₃ afforded high yields of secondary lactams 2a, 2d, and 2g, primary amines with larger substituents in α-position led to lower yields of 2 or even to regioisomeric indanone derivatives 4. However, subsequent alkylation of 2a, 2d, and 2g with various alkyl halides provided the corresponding N-substituted 3-benzazepin-2-ones 2 in good yields. Hydrogenation of 2 followed by BH₃ reduction led to 3-benzazepines 9. 3-Benzyl-2-methyl-2,3,4,5-tetrahydro-1H-3-benzazepine (9c) reveals high σ₁ affinity and selectivity over σ₂ and NMDA receptors.     

Regioselective synthesis of o-triazolyl-1,5-benzodiazepin-2-ones and o-isoxazolyl-1,5-benzodiazepin-2-ones via copper-catalyzed 1,3-dipolar cycloaddition reactions

A series of novel O-triazolyl-1,5-benzodiazepin-2-ones 6a–o and O-isoxazolyl-1,5-benzodiazepin-2-ones 7a–o was synthesized via a Cu(I)-catalyzed 1,3-dipolar alkyne–azide coupling reaction of N-substituted-1,5-benzodiazepine–alkyne derivatives 3a–c with various aromatic azides 4a–e and nitrile oxides 5a–e, respectively. The chemical structures of synthesized compounds were determined using ¹H NMR, ¹³C NMR, heteronuclear multiple bond correlation (HMBC), high-resolution mass spectra, as well as elemental analysis and was further confirmed by an X-ray diffraction analysis for compound 7d.     

One-pot multicomponent synthesis of some 5,6-dihydro-benzo[h]quinoline derivatives

5,6-Dihydrobenzo[h]quinoline derivatives 4a–f and 5a–c were prepared via condensation of the corresponding arylidenes 2, with 1-tetralone in the presence of ammonium acetate and sodium methoxide, respectively, following thermal, microwave and ultrasound methodologies. The yields of 4a–f were moderate when the latter two methodologies used, but the products were pure. Ultrasound and microwave irradiation methods were also used in the synthesis of 4-aryl-3-cyano-1,2,5,6-tetrahydro-benzo[h]quinoline-2-ones (6a–e) and its analogues 7a,b. The majority of compounds 4–7 were synthesized via one-pot multicomponent reactions of aldehydes, active cyanomethylene compounds, 1-tetralone and ammonium acetate. Attempts to cyclocondensation of the aminocyano derivative 4a,d with acetic anhydride in presence of conc. H₂SO₄ failed; instead the acetylamino derivative 8 was isolated. On the other hand, refluxing of 4d with formamide in DMF led to the formation of dihydrobenzo-pyrimidoquinoline 9 giving good yield. All prepared condensates were structurally elucidated by various spectroscopic methods. Screening of the potential cytotoxicity for compounds 4a–f on five cell lines, namely: colorectal carcinoma (HCT-116), Hepatocellular carcinoma (HEPG2), Human breast adenocarcinoma (MCF7), Cervix adenocarcinoma (HELA) and Glioblastoma (U251), did not show any cytotoxic activity.     

Phosphorus-nitrogen compounds part 22. Syntheses, structural investigations, biological activities and DNA interactions of new mono and bis (4-fluorobenzyl) spirocyclophosphazenes

The reactions of hexachlorocyclotriphosphazene, N₃P₃Cl₆, with mono (1 and 2) and bis(4-fluorobenzyl) diamines (3-5), FPhCH₂NH(CH₂)_nNHR (RH or FPhCH₂-), produce mono (1a and 2a) and bis(4-fluorobenzyl) monospirocyclophosphazenes (3a-5a). The tetraaminomonospirocyclophosphazenes (1b-2d) are obtained from the reactions of the partly substituted phosphazenes (1a and 2a) with excess pyrrolidine, morpholine and 1,4-dioxa-8-azaspiro[4,5]decane (DASD), respectively. The tetrachlorobis(4-fluorobenzyl) monospirocyclophosphazenes (4a and 5a) with excess pyrrolidine, morpholine and DASD afford the fully substituted bis(4-fluorobenzyl) monospirocyclophosphazenes (4b, 4d-5d) in boiling THF. In addition, monochlorobis(4-fluorobenzyl) monospirocyclophosphazenes (4e and 4f) have also been isolated from the reactions with excess morpholine and DASD in boiling THF. The structural investigations of the compounds have been verified by elemental analyses, MS, FTIR, ¹H, ¹³C, ¹⁹F (for 1d and 2d), ³¹P NMR, HSQC and HMBC techniques. The crystal structures of 3a, 4a, 5a and 2b have been determined by X-ray crystallography. The compounds 2a-5a, 1b-2d, 4b, 4d-5d, 4e and 4f have been screened for antibacterial effects on bacteria and for antifungal activity against yeast strains. The compounds 1b and 4b showed antimicrobial activity against three species of bacteria, Bacillus subtilis, Bacillus cereus and Staphylococcus aureus, and two fungi, Candida albicans and Candida tropicalis. Minimum inhibitory concentrations (MIC) were determined for 1b and 4b. The MIC values were found to be 5000 μM for each bacteria. The most effective compound, 4b has exhibited activity with a MIC of 312 μM for C. albicans and 625 μM for C. tropicalis. DNA-binding and the nature of the interaction with pBR322 plasmid DNA are studied. All of the compounds induce changes on the DNA mobility and intensity. Prevention of HindIII digestion with the compounds indicates that the compounds bind with AT nucleotides in DNA.     

Further studies on the taumerization of the hydrido (alkynyl) cluster Ru3Pt(μ-H) {μ4-ν2-C ≡ C1Bu} (CO)9(L2) to the vinylidene cluster Ru3Pt{μ4-ν2-C ≡ C(H)tBu} (CO)9(L2): X-ray structures of Ru3Pt(μ-H){μ4-ν2-C = C(H)tBu} (CO)9(L2); L2 = dppet,dppp, andS,S-dppb

The first order rate constants for the tautomerization of the hydrio(alkynyl) clusters Ru₃Pt(μ-H){μ₄-ν²-C ≡ C¹Bu}(CO)₉(L₂);1a: L₂ = dppe,1b; L₂ = dppet,1c; L₂ = dppp and1d; L₂ =S,S-dppb to the corresponding vinylidene clusters Ru₃Pt{μ₄-ν²-C = C(H)^tBu}(CO)₉(L₂)2 have been measured, and they follow the orser1d <1a <1b ～1c. The reactions involving1a and1d exhibit an inverse kinetic deuterium isotope effect. The structures of1b, 2b, 2c, and2d were determined by X-ray crystallography, and are compared with those of1a and2a which have been previously reported. Crystal data for1b, space groupPbca,a = 13.338(4) Å,b = 17.771(6) Å,c = 36.092(8) Å,Z = 8,R(R _w) = 0.059(0.058) for 2342 absorption corrected, observed data; for2b, space group P2₁/n,a = 10.566(2) Å,b = 20.234(5) Å,c = 20.270(3) Å,β = 96.11(1)°,Z = 4,R(R _w) = 0.043(0.053) for 5865 absorption corrected, observed data; for2c, space group P2₁/n,a = 14.211(5) Å,b = 19.534(2) Å,c = 15.870(2) Å,β = 100.81(2)°,Z = 4,R(R _w) = 0.055(0.031) for 6566 absorption corrected, observed data: for2d, space group P2₁2₁2₁,a = 12.309(4) Å,b = 19.047(6) Å,c = 19.206(4) Å,Z = 4,R(R _w) = 0.055(0.053) fpr 2151 absorption corrected, observed data. The fluxional behavior of1d and1e (which consists of two interconverting isomers) has been examined by variable temperature¹³C NMR spectroscopy and by³¹P EXSY.     

Design and synthesis of some novel pyridothienopyrimidine derivatives and their biological evaluation as antimicrobial and anticancer agents targeting EGFR enzyme

A new series of pyridothienopyrimidine derivatives was designed and evaluated as antimicrobial and anticancer agents. The target compounds were synthesized starting with 3-aminothieno[2,3-b]pyridine-2-carboxamide derivative 1 which underwent cyclocondensation reaction with aromatic aldehydes to give the key intermediates 2a,b. By further treatment of 2a,b with various reagents, the target 2,4-disubstituted-pyrido[3′,2′:4,5]thieno[2,3-d]pyrimidines 3a,b–11a,b were obtained. To evaluate the antimicrobial activity of the new compounds, they were tested against five bacterial and five fungal strains. Compounds 6c, 8b, 9a and 9b revealed the most significant antimicrobial activity against the tested microorganisms with MIC values range (4–16 μg/mL). Also, compounds 2a,b–11a,b were screened for their in vitro cytotoxic activity against HepG-2 and MCF-7 cancer cell lines compared with doxorubicin and cisplatin as references drugs. Moreover, compounds (2b, 4a, 6a, 7b, 7c and 9a) which exhibited the most potent anticancer activity, were further subjected to EGFR^WT enzyme inhibition assay utilizing erlotinib as a standard drug. The compounds 6a, 7b, 7c and 9a which showed the most promising suppression effects were also evaluated as inhibitors against the mutant forms EGFR^L858R and EGFR^T790M. The 4-aminopyrazolone analogue 9a showed superior anticancer activity against both HepG-2 and MCF-7 cell lines (IC50 = 1.27, 10.80 μM, respectively) and more potent enzymatic inhibition activity against EGFR^WT and its mutant forms EGFR^L858R and EGFR^T790M than that obtained by erlotinib (IC₅₀ = 0.021, 0.053, 0.081 µM, respectively, IC_50erlotinib; 0.027, 0.069, 0.550 µM, respectively). Finally, the molecular docking study showed good binding patterns of the most active compounds with the prospective target EGFR^WT.     

One-pot synthesis of 6H-2,2a1,3-triazaaceanthrylen-6-ones and 6H-2,2a1,4-triazaaceanthrylen-6-ones via tandem cyclization strategies

Two operationally simple one-pot protocols have been developed for the synthesis of 6H-2,2a¹,3-triazaaceanthrylen-6-ones and 6H-2,2a¹,4-triazaaceanthrylen-6-ones. The first Pd-catalyzed tandem cyclization of imidazo[1,2-a]pyrimidines/imidazo[1,2-a]pyrazines with 2-chlorobenzaldehydes could proceed in aqueous medium under air, affording the desired products in moderate to good yields. The molecular structures of products 3i and 5b were confirmed by X-ray crystallographic analysis.     

A facile synthesis of novel 3-(aryl/alkyl-2-ylmethyl)-2-thioxothiazolidin-4-ones using microwave heating

(Z)-5-(2-(1H-Indol-3-yl)-2-oxoethylidene)-3-(aryl/alkyl-2-ylmethyl)-2-thioxothiazolidin-4-ones (7a–w) have been synthesized by the Knoevenagel condensation reaction of 3-(aryl/alkyl-2-ylmethyl)-2-thioxothiazolidin-4-ones (3a–d) with suitably substituted 2-(1H-indol-3-yl)2-oxoacetaldehydes (6a–g) under microwave conditions. The thioxothiazolidin-4-ones were prepared from the corresponding aryl/alkyl amines (1a–d) and di-(carboxymethyl)-trithiocarbonyl (2). The aldehydes (6a–g) were synthesized from the corresponding acid chlorides (5a–g) using HsnBu₃.     

Infrared spectroscopic detection of sulphone groups in doped polybenzo[c]thiophenes

By reaction of 1,3-dihydrobenzo[c]thiophene with FeCl₃, air or TCNQ the oxidatively doped polybenzo[c]thiophenes (1a, b, d, e) were prepared. Their infrared spectra showed two strong absorptions in the ranges 1265–1337 cm⁻¹ and 1142–1184 cm⁻¹. Efficient drying did not change these absorptions but reaction of 1a, b, d, e with LiAlH₄ resulted in their decrease to weak bands. According to these results and by comparison with the infrared spectra of reference compounds data, 1a—e were found to contain sulphone groups.     

Palladium catalyzed insertion of carbon monoxide into benzyl-tetrahydroisoquinolines : A new synthesis of berbine alkaloids

A new total synthesis of the berbine alkaloid ring system has been achieved. Palladium catalyzed insertion of carbon monoxide into the 1 - (2 - bromobenzyl) - substituted - 1,2,3,4 - tetrahydroisoquinolines (1a–1d) by the use of catalytic amounts of palladium diacetate and triphenylphosphine in the presence of tri-n-butylamine afforded the berbin-8-ones (2a–2d) which, on reduction with lithium aluminium hydride gave the berbines (±)-berbine 3a, (±)2,3-dimethoxyberbine 3b, (±)-xylopinine 3c and (±)-pseudoepitetrahydroberbine 3d.     

Chelating diamide complexes of titanium: new catalyst precursors for the highly active and living polymerization of α-olefins

The reaction of RHN(CH₂)₃NHR (1a,b) (a, R=2,6-ⁱPr₂C₆H₃; b, R=2,6-Me₂C₆H₃) with 2 equiv of BuLi followed by 2 equiv of ClSiMe₃ yields the silylated diamines R(Me₃Si)N(CH₂)₃N(SiMe₃)R (3a,b). The reaction of 3a,b with TiCl₄ yields the dichloride complexes [RN(CH₂)₃NR]TiCl₂ (4a,b) and two equiv of ClSiMe₃. An X-ray study of 4a (P2₁/n, a=9.771(1) Å, b=14.189(1) Å, c=21.081(2) Å, β=96.27(1)°, V=2905.2(5) ų, Z=4, T=25°C, R=0.0701, R_w=0.1495) revealed a distorted tetrahedral geometry about titanium with the aryl groups lying perpendicular to the TiN₂-plane. Compounds 4a,b react with 2 equiv of MeMgBr to give the dimethyl derivatives [RN(CH₂)₃NR]TiMe₂ (5a,b). An X-ray study of 5b (P2₁2₁2₁, a=8.0955(10) Å, b=15.288(4) Å, c=16.909(3) Å, V=2092.8(7) ų, Z=4, T=23°C, R=0.0759, R_w=0.1458) again revealed a distorted tetrahedral geometry about titanium with titanium–methyl bond lengths of 2.100(9) Å and 2.077(9) Å. These titanium dimethyl complexes are active catalysts for the polymerization of 1-hexene, when activated with methylaluminoxane (MAO). Activities up to 350,000 g of poly(1-hexene)/mmol catalyst·h were obtained in neat 1-hexene. These systems actively engage in chain transfer to aluminum. Equimolar amounts of 5a or 5b and B(C₆F₅)₃ catalyze the living aspecific polymerization 1-hexene. Polydispersities (M_w/M_n) as low as 1.05 were measured. Highly active living systems are obtained when 5a is activated with {Ph₃C}⁺[B(C₆F₅)₄]⁻. A primary insertion mode (1,2 insertion) has been assigned based on both the initiation of the polymer chain and its purposeful termination with iodine.     

Über die Synthese von 1,3-Dihydro-3-(2-dimethylaminoäthyl)-1-(3-thienyl)-benzimidazol-2-onen

The synthesis of 1-(3-thienyl)-benzimidazol-2-ones (3 a and4), described in an earlier paper¹, has been further investigated. The Na-salt of3 a is converted to a benzimidazolone substituted in position 3 (3 b). Dehydrogenation of the thiophene nucleus of3 a with chloranil yields5 a, which undergoes substitution in position 3 with Cl(CH₂)₂N(CH₃)₂ to give5 b. Monochlorination of5 a yields5 c, the structure of which is confirmed by¹H-NMR-spectroscopy.5 d is obtained by reaction of the Na-salt of5 c with Cl(CH₂)₂N(CH₃)₂.      

A new class of azobenzene chelators for Mg and Ca in buffer at physiological pH

A new class of azobenzene-based chelators, trans-3a and trans-3b (3a and 3b), were designed and synthesized in two steps. Both 3a and 3b were readily dissolved in a buffer solution at physiological pH. The values of the dissociation constant of 3a and 3b for Mg²⁺ and Ca²⁺ were determined by the Hills plot; K_d^Mg=1.12 mM and K_d^Ca=660 μM for 3a and K_d^Mg=158 μM and K_d^Ca=200 μM for 3b, respectively. On irradiation at 489 nm light, 3a isomerized to give cis-form, which underwent cis-to-trans thermal isomerization in darkness at room temperature. The change in the absorption spectrum of the irradiated solution of 3a in the presence of Mg²⁺, showing the cis-to-trans thermal isomerization, indicates that the affinity of cis-3a for Mg²⁺ is lower than that of 3a.     

Synthesis and application of an efficient calix[4]arene-based anion receptor bearing imidazole groups for Cr(VI) anionic species

We synthesized the new calix[4]arene amines bearing two and four imidazole or tert-butylamine moieties (9a,b/10a,b) by the reaction of di- or tetra-tosylated calix[4]arene derivatives (7 and 8, respectively) with 1-(3-aminopropyl)imidazole and/or tert-butylamine, respectively. After the characterization of 9a,b/10a,b their extraction abilities toward Cr(VI) anionic species (CAS) was evaluated and compared by the liquid–liquid extraction method. The extraction results revealed that calix[4]arene amine having four imidazole groups (10a) was an efficient anion receptor for CAS. Moreover, the extraction of CAS by 10a in the presence of other anions such as Cl^?, NO₃^?, and PO₄^3? showed that 10a could be a selective anion receptor for CAS in the presence of those anions.