New Stimuli Responsive Poly(1‐vinylpyrrolidin‐2‐one) Bearing Pendant Activated Disulfide Groups

Summary: A novel functionalised poly(1‐vinylpyrrolidin‐2‐one) (PVP) derivative, carrying a pre‐determined amount of 2‐(2‐pyridinyldithio)ethylamine moieties as side substituents, P(VP‐co‐VP‐SS‐Py), has been prepared from carboxylated VP copolymers, in turn obtained by copolymerising 1‐vinylpyrrolidin‐2‐one with 3,3‐di‐(ethoxycarbonyl)‐1‐vinylpyrrolidin‐2‐one in the presence of radical initiators. Using reaction solvents acting in the mean time as chain transfer agents could control its molecular weight. P(VP‐co‐VP‐SS‐Py) proved to be extremely reactive towards exchange reactions with molecules containing mercapto functions, including bioactive peptides. The exchange derivative with reduced glutathione, chosen as a model compound, was easily prepared.

     

Supramolecular Assembly of Gold Nanoparticles Mediated by Polypseudorotaxane with Thiolated β‐Cyclodextrin

Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.

A typical TEM image of gold nanoparticle aggregate 2 .     

Synthesis of Thermosensitive PNIPAM‐co‐MBAA Nanotubes by Atom Transfer Radical Polymerization within a Porous Membrane

Summary: Thermosensitive polymer nanotubes can be fabricated within an aminopropylsilane‐modified porous anodic aluminum oxide membrane by surface‐initiated atom transfer radical polymerization (ATRP) followed by template removal. DSC experiments prove that the synthesized PNIPAM‐co‐MBAA copolymer nanotubes have a reversible thermosensitive behavior. The temperature‐induced changes in dimension and shape of the nanotubes were studied by AFM in real time in an aqueous environment. It indicates that the nanotubes undergo a shape alteration from an “ellipse” to “circular” shape in water upon heating to LCST or above.

DSC curves of PNIPAM‐co‐MBAA nanotubes.     

Patterning Proteins on Surfaces of Cross‐Sectioned Multilayer Polymer Films

Summary: A new approach is introduced to create submicrometer patterned surfaces using multilayer polymer films that contain alternating layers of two polymers, linear low‐density polyethylene (LLDPE) and ethylene‐co‐(acrylic acid) copolymer (EAA). Patterned templates have been prepared by microtoming the multilayer molded sheets. Regionally confined chemical functionality is confirmed by grafting an amine‐terminated biotin and adsorbing streptavidin specifically on the alternating layers of EAA.

Fluorescence micrograph of the Alexa488‐streptadivin patterned polymer surface.     

Ultrafast Responsive Poly‐ (N‐isopropylacrylamide) Gel Produced by Cryostructuring of Self‐crosslinkable Polymer Microgels

A macroporous material composed of closely aggregated particles was prepared by cryo‐structuration of N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide (NIPA‐co‐HMAm) particle suspensions. The formed structure was maintained by the formation of covalent bonds through self‐crosslinking between the particles while the system was in a semi‐frozen state thus avoiding the need to freeze‐dry the sample. This resulted in macroporous structure composed of closely aggregated thermoresponsive particles which exhibit an ultrafast temperature response. The response rate can be attributed both to the macroporous structure as well as the fast responsive properties of the individual particles.

     

Amphiphilic Block‐Graft Copolymers with a Degradable Backbone and Polyethylene Glycol Pendant Chains Prepared via Ring‐Opening Polymerization of a Macromonomer

Well‐defined amphiphilic block‐graft copolymers PCL‐b‐[DTC‐co‐(MTC‐mPEG)] with polyethylene glycol methyl ether pendant chains were designed and synthesized. First, monohydroxyl‐terminated macroinitiators PCL‐OH were prepared. Then, ring‐opening copolymerization of 2,2‐dimethyltrimethylene carbonate (DTC) and cyclic carbonate‐terminated PEG (MTC‐mPEG) macromonomer was carried out in the presence of the macroinitiator in bulk to give the target copolymers. All the polymers were characterized by ¹H NMR and gel permeation chromatography (GPC). The polymers have unimodal molecular weight distributions and moderate polydispersity indexes. The amphiphilic block‐graft copolymers self‐assemble in water forming stable micelle solutions with a narrow size distribution.

     

Environmentally Friendly Negative Resists Based on Acid‐Catalyzed Acetalization for 193‐nm Lithography

Novel water‐developable negative resists were designed to induce both crosslinking and polarity change upon exposure and bake. The matrix polymers were synthesized by copolymerization of glyceryl methacrylate and methacrolein. The acid‐catalyzed acetalization of the polymer induced crosslinking, polarity change, and an increase in dry‐etch resistance. The resist formulated with this polymer and cast in a water/ethanol mixture showed 0.7 μm line and space patterns using a mercury–xenon lamp in a contact printing mode and pure water as a developer.

The acid‐catalyzed acetalization of poly(GMA‐co‐MA) to form the water‐insoluble acetal.     

Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

Ordered Honeycomb‐Structured Films from Dendronized PMA‐b‐PEO Rod‐Coil Block Copolymers

Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO₁₁₃‐b‐PDMA₈₂) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.

     

Surface‐Functionalized,Ring‐Opening Metathesis Polymerization‐Derived Monoliths for Anion‐Exchange Chromatography

Ring‐opening metathesis polymerization (ROMP) was used for the synthesis of monolithic capillary columns with inner diameters of 200 µm. The resulting polymeric monoliths were characterized by inverse size‐exclusion chromatography (ISEC). Surface functionalization was carried out in situ using 2‐(N,N‐dimethylaminoethyl)norborn‐5‐ene‐2‐ylcarboxylic amide ( 1 ). The resulting functionalized monoliths were successfully used in anion‐exchange chromatography of oligodeoxynucleotides.

     

Low‐Temperature FT‐NIR Spectroscopy of Strain‐Induced Orientation and Crystallization in a Poly(dimethylsiloxane) Network

Summary: The mechanical properties, morphology, and orientation of a poly(dimethylsiloxane) (PDMS) network have been studied during cyclic elongation and recovery by simultaneous Fourier‐transform near‐infrared polarization spectroscopy at temperatures ranging from room temperature to −40 °C. Completely different orientation/recovery mechanisms and changes in the state of order of PDMS were detected as a consequence of cyclic loading/unloading with decreasing temperature. The differences observed at −20 °C compared to room temperature are explained in terms of conformationally regular chain segments, whereas the cooling to −40 °C leads to the formation of lamellar crystals.

Stress/strain diagrams of the elongation/recovery‐cycles of the PDMS films.     

Supramolecular Dynamics as Origin for Thermally Induced Insoluble‐to‐Soluble‐to‐Insoluble Transitions of Copolymers in Water

The synthesis of cationic mono‐(6‐O‐(1‐vinylimidazolium))‐ß‐cyclodextrin with toluenesulfonate as the corresponding anion is described. Free‐radical copolymerization of the resulting host–guest complex with N‐isopropylacrylamide or N,N‐diethylacrylamide yielded copolymers showing a temperature‐controlled solubility window in water. The impact of different anionic guests and salt concentrations on solubility behavior was investigated via turbidity measurements.

     

Effect of Comonomer‐Unit Compositional Distribution on Thermal and Crystallization Behavior of Bacterial Poly[(3‐hydroxybutyrate)‐co‐(3‐mercaptopropionate)]

The physical properties of novel sulfur‐containing biopolymers, poly[(3‐hydroxybutyrate)‐co‐(3‐mercaptopropionate)]s [P(3HB‐co‐3MP)s], have been investigated in detail by¹H and ¹³C NMR spectroscopy, wide‐angle X‐ray diffraction (WAXD) analysis, DSC, and FT‐IR spectroscopy. Based on a solvent/non‐solvent (chloroform/heptane) fractionation method, an original P(3HB‐co‐3MP) sample with 3MP unit content of 16.3 mol‐% was fractionated into eight fractions with 3MP unit content ranging from 10.3 to 37.2 mol‐% and number‐average molecular weight from 0.4 × 10⁵ to 2.9 × 10⁵. The thermal and crystallization behavior were found to be greatly affected by the comonomer‐unit composition and its distribution. Furthermore, the 3MP comonomer unit was found to be included in the crystalline phase in some fractions.

     

A Novel Strategy for the Preparation of Reactively Compatibilized Polymer Blends with Oligomers Containing α‐Methyl Styrene Units

A novel strategy to prepare reactively compatibilized polymer blends is reported. An oligomer that consists of AMS (α‐methyl styrene) and GMA (glycidyl methacrylate) is initially synthesized. When this oligomer is melt blended with poly(propylene) (PP), the GMA units in the oligomer are successfully grafted onto the PP chain, which is proven by measuring the FT‐IR spectrum of the blended PP. When the oligomer is added to a blend of PP/Ny66, an in‐situ compatibilization occurs, which leads to an increase in torque values during blending, a decrease in crystallinity degree of Ny66, and is observed by SEM images of the resulting blends. The compatibilizing effects of the oligomer are also observed in PP/Ny6 and polyethylene/Ny6 blends. A relevant compatibilization mechanism is proposed.

     

Advancing the Solid State Properties of Metallo‐Supramolecular Materials: Poly(ε‐caprolactone) Modified π‐Conjugated Bis(terpyridine)s and their Zn(II) Based Metallo‐Polymers

A set of rigid π‐conjugated bis(terpyridine) macroligands with poly(ε‐caprolactone) (pCL) on their side chains was synthesized and investigated. The introduced pCL chains gave rise to enhanced processability and film‐forming properties of the materials. Blue photoluminescence with high quantum yields was observed in dilute solution and in the solid state, indicating that intermolecular aggregation of the π‐conjugated systems was effectively suppressed. The macroligands were further used for coordination with zinc(II) ions leading to new metallo‐polymers with high solubility, improved film‐forming behavior and promising photophysical properties with respect to potential OLED applications.

     

Design of Heterocomplementary H‐Bonding RAFT Agents – Towards the Generation of Supramolecular Star Polymers

Supramolecular poly(vinyl acetate) PVAc 3‐arms stars were successfully generated by Reversible Addition–Fragmentation chain Transfer (RAFT)‐polymerized chains bearing hydrogen‐bonding heterocomplementary associating units. Chain Transfer Agents (CTA) bearing thymine‐ and diaminopyridine‐based units were first synthesized and proved to mediate efficiently the polymerization of VAc. The binding ability of the chains in solution was then demonstrated by ¹H NMR and GPC measurements, proving the formation of the supramolecular stars.

     

Highly Efficient and Well‐Controlled Ambient Temperature RAFT Polymerization under Solar Radiation

Highly efficient and well‐controlled ambient temperature reversible addition–fragmentation chain transfer (RAFT) polymerization is readily carried out under environmentally friendly mild solar radiation. This discovery has significantly extended studies from man‐made separated‐spectroscopic‐emission UV‐vis radiation (Macromolecules 2006 , 39, 3770) to natural continuous‐spectroscopic‐emission solar radiation for ambient temperature RAFT polymerization.

     

Fabrication of Metal‐Block‐Copolymer Composite Films by a Palladium‐Catalyzed Electroless Nickel‐Plating Process

Summary: Homogeneous films of PI‐b‐PDMAEMA are prepared on top of silicon (100) substrates. The free film surface shows microdomains of PDMAEMA within a PI matrix. These microdomains act as templates for the highly site‐selective synthesis of metal nanoparticles via palladium‐catalyzed electroless nickel plating. The particle formation is studied by atomic force microscopy in tapping mode and implications for a redox reaction and a nanoparticle growth mechanism on the surface of nanopatterned films are discussed.

Chemical structure of the PI‐b‐PDMAEMA copolymer and AFM phase image of a PI‐b‐PDMAEMA film on Si (100) substrate.