Summary: Novel alternating polyketone‐based polymers bearing pendant saccharide units that are accessible by polymerization catalysis are presented. The materials were synthesized by polymerization of carbon monoxide and α‐olefins containing protected glucose or N‐acetyl glucosamine residues. The dicationic PdII bis(phoshine) complex [Pd(dppp)(NCCH3)2](BF4)2 was used as a catalyst precursor. An O‐deacetylation of the copolymers afforded materials with amphiphilic character.
Structure of the poly(1,4‐ketone) copolymers synthesized here. 相似文献
Films of an α‐cyclodextrin/poly(ε‐caprolactone) inclusion complex have been successfully prepared and show high transparency and heat resistance in comparison to the pure polymer film. The physical properties, such as transparency, mechanical properties, and thermal stability, of the α‐CD‐PCL‐IC films are found to depend on the α‐cyclodextrin‐to‐polymer stoichiometry.
The synthesis of poly(N‐vinylcarbazole)‐based block copolymers functionalized with rhenium diimine complexes or pendant terpyridine ligands is reported. The copolymers are synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization, and they exhibit interesting morphological properties as a result of the phase separation between different blocks. The rhenium complex polymer block may function as a photosensitizer, while the terpyridine‐containing polymer block can be used as the template for nanofabrication by selective deposition of zinc complexes.
The kinetic model of the co‐polycondensation with A2 and AB2 type monomers is developed and the analytical expressions of the various molecular parameters of the products are derived rigorously. The monomer feed ratio (α) of A2 to AB2 significantly affects the molecular parameters and the critical condition of gelation. Gelation can be avoided if α is > . At the critical state, the degree of branching decreases firstly and reaches its minimum value at about α≈0.22. Then, it increases with increasing α‐value. In comparison with experimental results, non‐equal reactivity of the active groups should be considered.
Poly(ethylene glycol) (PEG)‐interlocked hydrogels were prepared by linking the PEG with α‐cyclodextrins (α‐CDs) threaded onto a PEG chain having ester linkages at the terminals (hydrolyzable polyrotaxane). These hydrogels were examined to clarify the effect of ionic strength of phosphate buffers, pH, and the addition of ethanol on erosion time in relation to inclusion states of α‐CDs with the ester linkages. The most characteristic phenomenon of the hydrogel erosion was observed in an ethanol/PBS cosolvent system: the time to reach the complete erosion time was shortened with decreasing water content. NMR analysis revealed that the ester linkages were exposed to the aqueous environment due to the aggregation of α‐CDs. These results suggest that the movement of α‐CDs in the polyrotaxanes from the terminal ester region to the another region gives the ester linkages a chance to interact with water.
A novel supramolecular network has been prepared based on the formation of inclusion complexes between γ‐cyclodextrin and poly(ethylene glycol), in which the PEG chains are interlocked by γ‐CD rings. This PEG/γ‐CD network exhibits good shape memory behavior because of the crosslinked structure. The crosslinked PEG/γ‐CD inclusion complexes and PEG crystallites account for the fixing phase and reversible phase, respectively. The characteristics of the materials have been investigated by 1H NMR spectroscopy, XRD, DSC, DMA, viscosity tests, and swelling measurements.
Methacrylate‐modified β‐cyclodextrin (β‐CD) and methyl methacrylate (MMA) have been radically copolymerized to obtain hydrophobic CD copolymers. The water‐insoluble copolymers are able to form highly stable inclusion complexes with anions of ionic liquids. Surprisingly, the inclusion of the anions in the CD cavity results in a significant change of thermal and solution properties. Furthermore, it can be shown that the structure of the ionic liquid anions influences the coil structure of the copolymers. The obtained results could be proven by means of microcalorimetry, differential scanning calorimetry, and dynamic light scattering.
A synthetic model glycoprotein was successfully synthesized using gelatin and mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin which were reacted under microwave conditions in basic media. The resulting glycoprotein is observed to form intermolecular inclusion complexes through complexation of the aromatic moieties along the polymer chain by the attached cyclodextrins. This phenomenon was analyzed and proven by 2D NMR spectroscopy (ROESY) and dynamic light scattering (DLS). Above the denaturation temperature, a strong increase of the hydrodynamic diameter was found due to enhanced supramolecular agglomeration. Such a novel glycoprotein with supramolecular self‐recognition would be promising in biomedical applications serving as a drug‐delivery basis polymer.
Summary: Magnetic nanoparticles have been prepared by a co‐precipitation method and modified with methacryloxypropyltrimethoxysilane. Magnetic molecularly imprinted polymer particles have been prepared by suspension polymerization in silicone oil. The particles possess a high affinity to the template molecules and are rapidly separated under a magnetic field.
Food‐grade biomaterials, like β‐lactoglobulin, bovine serum albumin, and ovalbumin, can assemble into fibrils. Using the irreversible fibril formation for β‐lactoglobulin, gels can be formed even at protein concentrations of 0.07%. These fibrillar mesostructures form new structuring materials for food and pharmaceutical applications.
TEM micrograph of β‐lg at pH 2, after heating at 80 °C for 10 h and then the pH was adjusted to pH 8. 相似文献
Rate constants for long‐chain branch formation during ethylene polymerization with metallocene catalysts were estimated and compared to polymerization rate constants for long α‐olefins. Unexpectedly, these branching constants were found to be comparable to the reactivity ratios of much shorter α‐olefins. Micromixing effects or a parallel mechanism for long‐chain branch generation are proposed as possible explanations for this finding.
Comparison between the α‐olefin and branching incorporation rate constants, normalized by the propagation rate constant (the values estimated from ref. 1 are subject to a significant uncertainty because the reaction conditions are not provided. A 10 wt.‐% polymer fraction in the reactor was assumed to estimate these values). 相似文献
We report a new type of step‐growth radical addition‐coupling polymerization (RACP) involving consecutive addition of carbon‐centered radical derived from α,α′‐dibromo dibasic ester to NO double bond of C‐nitroso compound followed by cross‐coupling of carbon‐centered radical and in situ formed nitroxyl radical, which produces alternating copolymers with high molecular weight and unimodal molecular weight distribution from saturated and unsaturated monomers.
Summary: The affinity of polybetaines of pyridiniocarboxylate structure that differed by the number n of methylene groups in the betaine moieties (n = 1, 2, 4, and 5) to the tagged poly(methacrylic acid) or DNA was estimated by fluorescence quenching techniques. The revealed irregular change of the affinity with increase in n and the pronounced pH‐induced stabilization of the complexes in neutral media may be particularly beneficial in the development of (bio)separation techniques.
pH‐Dependence of stability of PCB‐n complexes with poly(methacrylic acid) in water‐salt solutions presented in relative units. 相似文献
Summary: Polypeptide‐shelled poly(propylene imine) dendrimers were realized by ring‐opening polymerization of α‐amino acid N‐carboxyanhydrides, initiated by dendrimers as core molecules. Polypeptides with 2nd generation core were used as model compounds to investigate interior complexes between metal ion and surface‐modified dendrimers. Micro‐calorimetric measurements outlined the formation of approximate 1:1 complexes between CuII and polypeptide‐shelled dendrimers and the influence of polypeptide chain compositions on differential molar heats of complexation.
Composition of one of the polypeptides synthesized. 相似文献
Summary: The synthesis and thermal, redox and photoluminescence properties of a soluble donor‐acceptor polyplatinayne with the electron‐accepting silole ring and its model compound are described. The polymer has an optical band gap of 2.10 eV which is much lower than that of thienyl‐ or silyl‐bridged congeners. The incorporation of electron‐accepting silole unit in the metallopolymer main chain creates a new π‐conjugated system that features unique donor‐acceptor characteristics.
The catalytic properties of bis(phenoxy‐imine) Zr and Hf complexes incorporating perfluorophenyl groups with methylaluminoxane were investigated. The fluorinated complexes produced far higher‐molecular‐weight polyethylenes and ethylene/propylene copolymers with increased activities compared with the non‐fluorinated congeners. Moreover, the fluorinated complexes displayed a higher incorporation ability for propylene.
The products of the thermal degradation at 95 °C over 10 months of ω‐saturated and non‐saturated poly(methyl methacrylate) (pMMA) model compounds were identified with high accuracy via quadrupole ion trap and quadrupole ion trap‐time of flight (Q‐ToF) mass spectrometry. Analysis of the samples taken via these techniques indicated that degradation of vinyl terminated pMMA proceeds via the incorporation of oxygen via the formation of ethylene oxide type end groups, which subsequently rearrange under the expulsion of formaldehyde and 2‐oxo‐propionic acid methyl ester. The corresponding saturated model compounds were demonstrated to be stable over the same time period. The present findings highlight for the first time that poly(methyl methacrylate) degradation does not necessarily and exclusively proceed via radical intermediates.
In this communication, γ‐phenyl‐γ‐butyrodithiolactone (DTL1) is presented as the first example of a new type of control agent. The styrene polymerization carried out at 60 °C in the presence of DTL1 exhibits living characteristics, without consuming DTL1 during the process. This unprecedented behavior was explained by a mechanism based on the reversible formation of a persistent radical adduct between the DTL1 and the polystyrene macroradicals.
