含二呋喃基苯并噻二唑的聚芳炔类衍生物的合成与性能

以四(三苯基磷)钯(Pd(PPh3)4)和CuI为催化剂,在二异丙胺和四氢呋喃溶液中,采用宽能带的1,4-二乙炔基-2,5-二(十二烷氧基)苯(PE)和窄能带的4,7-双(5′-溴-2′-呋喃)-2,1,3-苯并噻二唑(FBT)合成了一系列新型聚芳炔。长链烷氧基的存在使得此类聚合物在常用的有机溶剂中具有较好的溶解性和成膜性。通过对上述聚合物的紫外-可见吸收、荧光发射及循环伏安等基本性能进行探讨可知,随着共聚物中FBT含量的增加,共聚物薄膜的吸收起始波长及荧光发射波长均有明显的红移。聚合物薄膜的最大发射峰位于600～650 nm,聚合物中的能量能有效地由PE单元转移到FBT单元上。     

Cholesterol-substituted Tetrathiafulvalene(TTF)Compound:Formation of Organogel and Supramolecular Chirality

A new tetrathiafulvalene (TTF) derivative with two cholesterol units (compound 1 ) was synthesized and characterized. Gelation of n‐hexane occurred after the hot solution of 1 was subjected to ultrasonic treatment for a few minutes. The resulting organogel was characterized with SEM, XRD and AFM. Besides heating the gel‐sol transition also occurred upon addition of I₂ which can oxidize the TTF unit in 1 . This result provides a new example of organogels responding to redox reactions. Interestingly, gelation‐induced CD signals were observed and the CD signals can be tuned with the gel‐sol transition which can be effected by heating and chemical reaction with I₂.     

Polypeptide‐b‐Poly(Phenyl Isocyanide) Hybrid Rod‐Rod Copolymers: One‐Pot Synthesis,Self‐Assembly,and Cell Imaging

Hybrid rod‐rod diblock copolymers, poly(γ‐benzyl L‐glutamate)‐poly(4‐cyano‐benzoic acid 2‐isopropyl‐5‐methyl‐cyclohexyl ester) (PBLG‐PPI), with determined chirality are facilely synthesized through sequential copolymerization of γ‐benzyl‐L‐glutamate N‐carboxyanhydride (BLG‐NCA) and phenyl isocyanide monomers bearing chiral menthyl pendants using a Ni(cod)(bpy) complex as the catalyst in one‐pot. Circular dichroism and absorption spectra reveal that each block of the block copolymers possesses a stable helical conformation with controlled helicity in solution due to the induction of chiral pendants. The two diastereomeric polymers self‐assemble into helical nanofibrils with opposite handedness due to the different chiral induction of the L‐ and D‐menthyl pendants, confirmed by transmission electron micro­scopy (TEM). Deprotection of the benzyl groups of the PBLG segment affords biocompatible amphiphilic diblock copolymers, poly(L‐glutamic acid)‐poly(4‐cyano‐benzoic acid 2‐isopropyl‐5‐methyl‐cyclohexyl ester) (PLGA‐PPI), that can self‐assemble into well‐defined micelles by cosolvent induced aggregation. Very interestingly, a chiral rhodamine chromophores RhB(D) can be selectively encapsulated into the chiral polymeric micelles, which is efficiently internalized into living cells when directly monitored with a confocal microscope. This contribution will be useful for developing novel rod‐rod biocompatible hybrid block copolymers with a controlled helicity, and may also provide unique chiral materials for potential bio‐medical applications.

     

Facile One‐Pot Synthesis of a Polyvinylpyrrolidone‐Based Self‐Crosslinked Fluorescent Film

A polyvinylpyrrolidone (PVP)‐based fluorescent film with stable optical properties is successfully prepared in one pot without any additive. The reaction mechanism of ring‐opening and self‐crosslinking of linear PVP is proposed and demonstrated. The morphologies and the nanostructures of the fluorescent film as well as the unmodified film are investigated. The dye is incorporated into the film networks via covalent linkages, thus leading to the highly stable optical properties. The facile and effective synthesis approach opens a new way for the design of other multi‐functional composite materials based on linear PVP.

     

First Successful Post‐Synthetic Self‐Assembly of Polyaniline with Poly(N‐vinylpyrrolidone) into Aqueous Nanocolloids

Summary: Polyaniline (PANI) is successfully self‐assembled with poly(N‐vinylpyrrolidone) (PVP) into aqueous nanocolloids. The typical morphology of the colloids is studied by atomic force microscopy (AFM), which reveals spherical nanoparticles with a diameter of 80–150 nm. A possible mechanism for such a post‐synthetic self‐assembly process is proposed.

AFM micrograph of PANI aqueous nanocolloids stabilized by PVP via a novel post‐synthetic self‐assembly method.     

Oligo(p‐phenyleneethynylene)‐based coil–rod–coil triblock copolymer: Synthesis and controlled self‐organization in solution

The self‐assembling ability of block copolymers offers an attractive strategy for the organization of π‐conjugated polymers. This article reports the synthesis of a coil–rod–coil triblock copolymer consisting of oligo(p‐phenyleneethynylene) as the rodlike segment and polystyrene as the coil‐like segment. The chemical structure of the afforded triblock copolymer has been fully characterized by various spectroscopic techniques such as NMR, Raman, gel permeation chromatography, differential scanning calorimetry, ultraviolet–visible, and fluorescence spectroscopy. The small‐angle neutron scattering and photophysical measurements indicate that this triblock copolymer exhibits unique solvatochromatic behaviors through the interplay of aggregation‐induced π–π stacking and planarization of the conjugated backbone. Supramolecular gel nanostructures have been produced via the controlled assembly of the polymer into H‐aggregates. It has been demonstrated that the use of the solvent composition to influence chain conformations and thus to manipulate the packing of the conjugated polymer blocks is important for achieving control in the assembly of conducting polymers and associated optical characteristics. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6007–6019, 2005     

Para‐linked and meta‐linked cationic water‐soluble fluorene‐containing poly(aryleneethynylene)s: Conformational changes and their effects on iron–sulfur protein detection

Four para‐linked or meta‐linked cationic water‐soluble fluorene‐containing poly(aryleneethynylene)s (PAEs) were synthesized to investigate the solvent‐induced π‐stacked self‐assembly. These PAE backbones are composed of fluorenylene and phenylene units, which are alternatively linked by ethynylene bonds. UV–vis absorption and photoluminescence spectra were used to study their conformational changes as solvent was gradually changed from MeOH to H₂O. In pure water, with gradually increased meta‐phenylene content (0, 50, and 100%), they underwent a gradual transition process of conformation from disordered aggregate structure to helix structure, which was not compactly folded. Moreover, the polymer with an ammonium‐functionalized side chain on the meta‐phenylene unit appeared to adopt a more incompact or extended helix conformation than the corresponding one without this side chain. Furthermore, the conformational changes of these cationic PAEs in H₂O were used to study their effects on biological detection. Rubredoxin (Rd), a type of anionic iron–sulfur‐based electron transfer protein, was chosen to act as biological analyte in the fluorescence quenching experiments of these polymers. Preliminary results suggest that they all exhibit amplified fluorescence quenching, and that the polymer with more features of helix conformation tends to be quenched by Rd more efficiently. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5424–5437, 2006     

Formation of o‐Phenylenediamine Oligomers and their Self‐Assembly into One‐Dimensional Structures in Aqueous Medium

Summary: Uniform one‐dimensional (1D) structures of o‐phenylenediamine (oPD) oligomers are obtained by direct mix of AgNO₃ and oPD aqueous solutions at room temperature. The formation of the 1D structures involves two stages: (1) oxidation of oPD by AgNO₃, yielding individual oPD oligomers; and (2) self‐assembly of the oligomers, forming the 1D structures. Upon decreasing medium pH, the 1D structures can break‐apart to form individual oligomers, or vice versa. It is also found that both the concentration and molar ratio of reactants can influence the morphology of the structures thus formed.

Schematic illustration of the formation mechanism of 1D structures from oPD and AgNO₃, and energy‐dispersed spectrum of the precipitate.     

Poly(ε‐caprolactone)–poly(isobutylene): A crystallizing,hydrogen‐bonded pseudo‐block copolymer

The crystallization of block copolymers (BCPs) under homogeneous and heterogeneous nucleation is currently well understood revealing the strong interplay of crystallization in competition to microphase separation. This article reports investigations on synthesis and crystallization processes in weakly interacting supramolecular pseudo‐BCPs, composed of poly(ε‐caprolactone) (PCL) and poly(isobutylene) (PIB) blocks, connected by a specifically interacting hydrogen bond (thymine/2,6‐diaminotriazine). Starting from ring opening polymerization of ε‐caprolactone, the use of “click”‐chemistry enabled the introduction of thymine endgroups onto PCL polymer, thus generating the fully thymine‐substituted pure PCLs ( 1a , 1b ) as judged via NMR and MALDI analysis. Physical mixing of 1a , 1b with a bivalent, bis(2,6‐diaminotriazine)‐containing molecule ( 2 ) generated the bivalent polymers BC1 and BC2 , whereas mixing of 1a or 1b with the 2,6‐diaminotriazine‐substituted PIB ( 3 ) generated the supramolecular pseudo‐BCPs BC3 and BC4 . Thermal investigations (DSC, Avrami analysis) revealed only minor changes in the crystallization behavior of BC1 – BC4 with Avrami exponents close to three, indicative of a confluence of the growing crystals during the crystallization process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Photoluminescent Toroids Formed by Temperature‐Driven Self‐Assembly of Rhodamine B End‐Capped Poly(N‐isopropylacrylamide)

In this paper, self‐assembled polymeric toroids formed by a temperature‐driven process are reported. Rhodamine B (RhB) end‐capped poly(N‐isopropylacrylamide) (PNIPAAm) demonstrating a lower critical solution temperature (LCST) is prepared. In a two‐phase system, the polymer in the aqueous phase could move to the chloroform phase on raising the temperature above its LCST. This temperature‐driven process results in the formation of polymeric toroids in the chloroform phase, and the strategy affords a new pathway to toroidal self‐assembly of polymers. Moreover, the photoluminescent behavior of the RhB end‐capped PNIPAAm species formed by the process is also studied and discussed.

     

Controlling Aqueous Self‐Assembly Mechanisms by Hydrophobic Interactions

We report an innovative template‐assisted synthetic protocol for the selective functionalization of terminal triple bonds in oligophenyleneethynylenes (OPE) by pre‐organization in aqueous solution. By this approach, three new OPE‐based bolaamphiphiles substituted with hydrophilic poly(2‐ethyl‐2‐oxazoline) (PEtOx) chains of different length have been synthesized. The chain length was observed to strongly influence the aqueous supramolecular polymerization: bolaamphiphiles with longer hydrophilic chains aggregate into spherical nanoparticles in a stepwise fashion, whereas 2D anisotropic platelets are formed cooperatively if shorter PEtOx chains are used. Our results demonstrate that hydrophobic interactions can be strong enough to trigger cooperative effects in aqueous self‐assembly processes.     

Synthesis and Crystal Structure of the Tris‐bidentate Carbonatobis‐(1,10‐phenanthroline‐N,N′)nickel(II), [Ni(C12H8N2)2(CO3)]

The tris‐bidentate complex [Ni(C₁₂H₈N₂)₂(CO₃)] was synthesized by the reaction of Na₂CO₃, 1,10‐phenanthroline (phen = C₁₂H₈N₂) and NiSO₄ · 6 H₂O in the presence of succinic acid in a CH₃OH–H₂O solution. The compound crystallizes as heptahydrate. The crystal structure (monoclinic, P2₁/c (no. 14), a = 9.897(1), b = 26.384(2), c = 10.582(1) Å, β = 105.87(1)°, Z = 4, R = 0.0505, wR² = 0.1029 for 3166 observed reflections (F ≥ 2σ(F ) out of 6100 unique reflections) consists of hydrogen bonded water molecules and [Ni(phen)₂(CO₃)] complex molecules. The Ni atoms are sixfold octahedrally coordinated by the four N atoms of two bidentate chelating phen ligands and by two O atoms of the bidentate chelating carbonate group with d(Ni–N) = 2.092–2.100 Å, d(Ni–O) = 2.051, 2.079 Å. The complex molecules are stacked into 2D corrugated layers parallel to (010) via two types of intermolecular π‐π stacking interactions. One occurs between two quinoline rings of neighboring phen ligands at the distance of 3.63 Å in [010] direction and the other results from 1D π‐π stacking interactions through partially covered phen rings at alternative distances of 3.26 Å and 3.33 Å in [001] direction. The water molecules are sandwiched between 2D layers.     

Synthesis,Structure, Optical,and Electrochemical Properties of Triple‐ and Quadruple‐Decker Co‐facial Tetrathiafulvalene Arrays

Understanding the details of the electronic structure in face‐to‐face arranged tetrathiafulvalenes (TTFs) is very important for the design of supramolecular functional materials and superior conductive organic materials. This article is a comprehensive study of the interactions among columnar stacked TTFs using trimeric (trimer) and tetrameric (tetramer) TTFs linked by alkylenedithio groups (‐S(CH₂)_nS‐, n=1–4) as models of triple‐ and quadruple‐decker TTF arrays. Single‐crystal X‐ray analyses of neutral trimeric TTFs revealed that the three TTF moieties are oriented in a zigzag arrangement. Cyclic voltammetry measurements (CV) reveal that the trimer and tetramer exhibited diverse reversible redox processes with multi‐electron transfers, depending on the length of the ‐S(CH₂)_nS‐ units and substituents. The electronic spectra of the radical cations, prepared by electrochemical oxidation, showed charge resonance (CR) bands in the NIR/IR region (1630–1850 nm), attributed to a mixed valence (MV) state of the triple‐ and quadruple‐decker TTF arrays. In the trimeric systems, the dicationic state (+2; 0.66 cation per TTF unit) was found to be a stable state, whereas the monocationic state (+1) was not observed in the electronic spectra. In the tetrameric system, substituent‐dependent redox processes were observed. Moreover, π‐trimers and π‐tetramers, which show a significant Davydov blueshift in the spectra, are formed in the tricationic (trimer) and tetracationic (tetramer) state. In addition, these attractive interactions are strongly dependent on the length of the linkage unit.     

In Situ Synthesis and Characterization of Poly(aryleneethynylene)‐Grafted Reduced Graphene Oxide

Using highly soluble bromo‐functionalized reduced graphene oxide (RGBr) as a key graphene template for surface‐directing Sonogashira–Hagihara polymerization, a novel soluble poly(arylene‐ethynylene)‐grafted reduced graphene oxide, hereafter abbreviated as PAE‐g‐RGO, was prepared in situ. The entirely different electron distribution of LUMO and HOMO of PAE‐g‐RGO suggested the existence of a charge‐transfer (CT) state (PAE^.?–RGO^.+). The negative ΔG_CS value (?2.57 eV) indicates that the occurrence of the charge separation via ¹RGO* in o‐DCB is exothermic and favorable. Upon irradiation with 365 nm light, the light‐induced electron paramagnetic resonance (LEPR) spectrum of PAE‐g‐RGO showed a decrease in the spin‐state density owing to photoinduced intramolecular electron transfer events in this system. A sandwich‐type Al/PAE‐g‐RGO/ITO device showed representative bistable electrical switching behavior. The nonvolatile memory performance was attributed to the CT‐induced conductance changes, which was supported by molecular computation results and conductive atomic force microscopy (C‐AFM) images.     

Poly(thiaheterohelicene) derived from the long‐alkylated polysulfonium precursor

Poly[4,6‐bis(dodecylthio)‐1,3‐phenylene‐alt‐2‐methyl‐1,3‐phenylene] (Poly‐S) was synthesized via Suzuki–Miyaura coupling of 1,3‐dibromo‐2,6‐bis(dodecylthio)benzene and 2‐methyl‐1,3‐phenylenebis(pinacol borate). After quantitative oxidation of the pendant sulfide moiety to the sulfoxide derivative (Poly‐SO), the m‐linked benzene rings were fused via intramolecular ring‐closing condensation with excess triflic acid to form the corresponding poly(sulfonium cation) (Poly‐S⁺) with a helical structure. Poly‐S⁺ was quite soluble in non‐polar solvents due to the long alkyl dodecyl chain. The Poly‐S⁺ film, especially the film cast from its acetone solution, gave a polarized optical micrograph, suggesting an oriented structure of the helical poly(sulfonium) derivative. The X‐ray diffraction pattern of the film supported a hexagonal columnar packing of the polymer. The polysulfonium derivative in the film state was converted to the corresponding poly(thiaheterohelicene) ( Poly‐TH ) via the dealkylation with a basic potassium hydroxide methanol solution or pyridine. The Poly‐TH film was doped with iodine. Its conductivity was enhanced about 30 times when compared to that of the undoped film. Copyright © 2008 John Wiley & Sons, Ltd.     

Entropically Driven Self‐Assembly of Bolaamphiphilic Perylene Dyes in Water

The specific hydrophobic effect involved in the self‐assembly of a bolaamphiphilic perylene bisimide (PBI) dye bearing oligoethylene glycol (OEG) chains has been identified. In pure water, the self‐assembly is entropically driven and enthalpically disfavored, as explored by optical spectroscopy and isothermal titration calorimetry studies. Besides strong π–π interactions between the PBI units that are primarily of enthalpic nature, the major contribution to the self‐assembly is the gain of entropy by release of confined water molecules from the hydration shell of the hydrophilic OEG moieties. Both contributions favor self‐assembly, but their countervailing thermodynamic parameters are reflected in an uncommon temperature dependence, which can be inverted upon gradual addition of an organic cosolvent that makes the π–π interaction increasingly dominant.