Summary: Investigations regarding the cationic ring‐opening polymerization of 2‐phenyl‐2‐oxazoline under microwave irradiation and conventional heating are reported. This study was inspired by contradictory reports of the (non‐)existence of non‐thermal microwave effects that might accelerate the cationic ring‐opening of 2‐oxazolines. The polymerization of 2‐phenyl‐2‐oxazoline was investigated under pressure in acetonitrile and under reflux (or at the boiling point of butyronitrile in a closed vessel) in butyronitrile utilizing a single‐mode microwave reactor and automated synthesis robots with conventional heating.
Summary: Nitroxide‐mediated polymerization of styrene in a continuous tubular reactor has been demonstrated for the first time. The polymerization kinetics in the tubular reactor are similar to those in a batch reactor. The number average molecular weight increases linearly with conversion, and chain extension experiments were successful, indicating that the living nature of the polymerization is maintained in the tubular reactor.
Evolution of molecular weight as measured by GPC for chain‐extended latex in continuous tubular reactor. 相似文献
Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
Degradable dendrimer‐like PEOs were designed using an original ABC‐type branching agent featuring a cleavable ketal group, following an iterative divergent approach based on the anionic ring opening polymerization (AROP) of ethylene oxide and arborization of PEO chain ends. A seventh generation dendrimer‐like PEO carrying 192 peripheral hydroxyls and exhibiting a molar mass of 446 kg · mol−1 was obtained in this way. The chemical degradation of these dendritic scaffolds was next successfully accomplished under acidic conditions, forming linear PEO chains of low molar mass (≈2 kg · mol−1), as monitored by 1H NMR, SEC, and MALDI‐TOF mass spectrometry as well as by AFM.
Summary: A multistep synthetic procedure for preparing novel C60‐anchored two‐armed poly(tert‐butyl acrylate) was developed. First, two‐armed poly(tert‐butyl acrylate) bearing a malonate ester core with well‐controlled molecular weight was synthesized through atom transfer radical polymerization. The effective Bingel reaction between C60 and the well‐defined polymer was then carried out to yield C60‐anchored polymer. GPC, 1H NMR, and UV‐vis spectroscopy indicated that the C60‐anchored polymer was a monosubstituted and ‘closed’ 6,6‐ring‐bridged methanofullerene derivative.
Schematic of a novel C60‐anchored two‐armed polymer. 相似文献
In this communication, β‐cyclodextrin modified quantum dots were used as a water‐soluble “supramolecular” cross‐linker (SCL) because of its surface's supramolecular activity. The guest monomer‐loaded SCL (mSCL) can be used to copolymerize with water‐soluble monomers leading to transparent hybrid supramolecular hydrogels. This simple and versatile method opens new venues for the preparation of hybrid supramolecular hydrogels and the host–guest chemistry of cyclodextrins.
Summary: The debate on the mechanism of dithiobenzoate‐mediated RAFT polymerization may be resolved by including the reaction between a propagating radical and the star‐shaped combination product from irreversible termination into the kinetic scheme. By this step, a highly reactive propagating radical and a not overly stable three‐arm star species are transformed into the resonance‐stabilized RAFT intermediate radical and a very stable polymer molecule. The time evolution of concentrations is discussed for the main‐equilibrium range of CDB‐mediated methyl acrylate polymerization.
Illustration of the novel understanding of the RAFT mechanism in dithiobenzoate‐mediated RAFT polymerization. 相似文献
An efficient and simple synthesis approach to form stable 68Ga‐labeled nanogels is reported and their fundamental properties investigated. Nanogels are obtained by self‐assembly of amphiphilic statistical prepolymers derivatised with chelating groups for radiometals. The resulting nanogels exhibit a well‐defined spherical shape with a diameter of 290 ± 50 nm. The radionuclide 68Ga is chelated in high radiochemical yields in an aqueous medium at room temperature. The phagocytosis assay demonstrates a highly increased internalization of nanogels by activated macrophages. Access to these 68Ga‐nanogels will allow the investigation of general behavior and clearance pathways of nanogels in vivo by nuclear molecular imaging.
Reactions between the ethylene groups in the backbone of conjugated polymers under UV illumination and heat treatment result in the cross‐linking of the main polymer chains. The cross‐linking leads to two simultaneous results in the polymer: excellent solvent resistance and increased bandgap. Using this reaction, three‐color polymer light‐emitting diodes (PLEDs) with a multi‐layer structure can be easily realized by a dry photo‐pattern in an active‐gas‐free environment. Multi‐layer blue devices with dramatically enhanced efficiency can also be achieved conveniently.
We report a new type of step‐growth radical addition‐coupling polymerization (RACP) involving consecutive addition of carbon‐centered radical derived from α,α′‐dibromo dibasic ester to NO double bond of C‐nitroso compound followed by cross‐coupling of carbon‐centered radical and in situ formed nitroxyl radical, which produces alternating copolymers with high molecular weight and unimodal molecular weight distribution from saturated and unsaturated monomers.
The ring‐opening polymerization of glycidol at elevated temperatures is investigated. To improve the synthesis of dendritic polyether polyols, experiments are carried out without initiator to identify the influence of thermal side reactions. This results in a step‐growth polymerization caused by the spontaneous combination of monomers. Kinetic parameters of the side reactions are estimated by fitting simulated number‐ and weight‐average molecular weights to the experimental values measured at different reaction times during the polymerization. The reactions are conducted at three different temperatures of 90, 105, and 120 °C. It is shown that thermal side reactions lead to high dispersities of the final product and are highly sensitive to the reactor operating temperature.
Rate constants for long‐chain branch formation during ethylene polymerization with metallocene catalysts were estimated and compared to polymerization rate constants for long α‐olefins. Unexpectedly, these branching constants were found to be comparable to the reactivity ratios of much shorter α‐olefins. Micromixing effects or a parallel mechanism for long‐chain branch generation are proposed as possible explanations for this finding.
Comparison between the α‐olefin and branching incorporation rate constants, normalized by the propagation rate constant (the values estimated from ref. 1 are subject to a significant uncertainty because the reaction conditions are not provided. A 10 wt.‐% polymer fraction in the reactor was assumed to estimate these values). 相似文献
Two kinds of representative polymers, poly(N‐isopropylacrylamide) (PNIPAAm) and β‐cyclodextrin (β‐CD) were selected and modified with azide and alkyne fucntional groups, respectively. When the solutions of these two modified polymers were mixed together, a cross‐linking reaction, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition, occurred in the presence of Cu(I) catalyst. The strategy described here provides several advantages for the hydrogel formation including mild reaction conditions and controllable gelation rate. The resulted hydrogels were studied in terms of scanning electric microscopy (SEM), equilibrium swelling ratio and swelling/shrinking kinetics. The data obtained demonstrated the hydrogels had a porous structure as well as favorable thermosensitivity.
The distinct polymeric nanocapsule hybrid‐structures consisting of LCs in the core and PMMA or polystyrene in the corona domain were prepared by one‐step miniemulsion polymerization. Nematic LCs (4′‐pentyl‐4‐biphenylcarbonitrile and 4′‐heptyloxy‐4‐biphenylcarbonitrile) were especially adopted as hydrophobes that can suppress Ostwald ripening and had an important role to stabilize the miniemulsion droplets and control the size distributions of the latexes. The polymeric nanocapsule structures with narrow size distributions were confirmed by TEM and DLS measurements.
The establishment of advanced living/controlled polymerization protocols allows for engineering synthetic polymers in a precise fashion. Combining advanced living/controlled polymerization techniques with highly efficient coupling chemistries facilitates quantitative, modular, and orthogonal functionalization of synthetic polymer strands at their chain termini as well as side‐chain functionalization. The review highlights the current status of selected post‐functionalization techniques of polymers via orthogonal ligation chemistries, major characteristics of the specific transformation chemistry, as well as the characterization of the products.
The formation kinetics and structure of three‐dimensional networks in free radical polymerization of FM thermally initiated at high temperature are studied by analysis of zero and first‐order moments of molecular size distribution of primary chains (MSDPC) in the networks. Zero‐order moment values of MSDPC reveal that the system elapses as a living radical polymerization. Also, by means of the analysis of these moments and the first‐order ones of MSDPC, the sigmoidal shape of polymerization kinetic curves can be explained. On the other hand, the results of average crosslink density obtained using moment values of MSDPC suggest that this parameter does not change with polymerization temperature.
A comprehensive mathematical model is developed for the dynamic calculation of the molecular distributed properties (i.e. MWD and CCD) in a gas‐phase, catalytic, ethylene‐1‐butene copolymerization, FBR, taking into account the various kinetic, micro‐ and macroscopic phenomena in the reactor. The effects of the two single‐site catalyst mass fractions and reactor operating conditions on the production of polyolefins with ‘tailor‐made’ bimodal molecular properties are investigated. It is shown that PE grades with either a bimodal MWD or CCD can be produced in a single FBR, using a mixture of two single‐site catalysts under properly selected operating conditions.
The synthesis of new star‐shaped polymers, prepared by atom transfer radical polymerization of methyl methacrylate with tris(dialkylaminostyryl‐2,2′‐bipyridine) zinc(II) and iron(II) metalloinitiators, is reported. Their thermal and optical (absorption and emission) properties are discussed.
This communication reports a strategy for scale‐up of an in situ polymerization technique for polyolefin‐based nanocomposites preparation, taking layered silicate (clay) and multi‐walled carbon nanotubes (MWCNTs) as examples of nanofillers. The strategy is realized by transforming the nanofillers into granular “nanosupports” for Ziegler‐Natta catalysts. With a catalyst to polymer replication effect on particle morphology, the in situ prepared nanocomposites are of controlled granular particle morphology. With the polymer particle morphology controlled, the in situ polymerization technique becomes suitable for industrial olefin polymerization processes for mass production of polyolefin nanocomposites.
