We report the formation of poly(propylene) spherical and ellipsoidal particles templated by carbon nanotubes via solution crystallization. With an increase in nanotube loading, the particle shape changes from sphere to ellipsoid. In the intermediate concentration range, both spherical and ellipsoidal shapes coexist. The particle size decreases with an increase in nanotube loading.
Transparent film materials with excellent mechanical and thermal properties were elaborated by drying a latex suspension of armored polymer/Laponite composite particles. Low‐temperature TEM observation of ultrathin cross‐sections of the films indicated a unique network morphology characterized by a “honeycomb” distribution of the Laponite platelets remindful of the original particles morphology.
Summary: We describe an interesting approach to the fabrication of wettability gradients from hydrophobicity to superhydrophobicity in low‐density polyethylene (LDPE) films by first forming high porosity surfaces and placing the specimens onto linear temperature gradients. While the polymer chosen for the study is non‐polar, its microporous layer provides sufficient superhydrophobicity. Lateral gradient heating of the layer results in partial melting of the polymer and correspondingly decreases porosity thus decreasing hydrophobicity.
Furan ring‐functionalized solid surfaces are achieved by the initiated chemical vapor deposition (iCVD) method, a solvent‐free process to form films under mild conditions. The polymerization of furfuryl methacrylate monomer is initiated by a resistively heated filament wire. The functionality of the furan group in the iCVD film enabled Diels–Alder chemistry with 4‐phenyl‐1,2,3‐triazolin‐3,5‐dione (N‐PTD).
Summary: Magnetic nanoparticles have been prepared by a co‐precipitation method and modified with methacryloxypropyltrimethoxysilane. Magnetic molecularly imprinted polymer particles have been prepared by suspension polymerization in silicone oil. The particles possess a high affinity to the template molecules and are rapidly separated under a magnetic field.
Fibers of poly(lactic acid) (PLA) blended with p‐toluenesulfonic acid‐doped polyaniline, PAni.TSA, were obtained by electrospinning, following a factorial design which was used mainly to study the effect of four process parameters (PLA solution concentration, PAni solution concentration, applied voltage, and flow rate) on fiber diameter. Due to the non‐Gaussian spread of the fiber diameters, probability density functions (PDF's) were used to describe them, and the main effect analysis was performed considering the most representative values of these PDF's. This study suggests that the main factor which governs the fiber dimension is the concentration of the PAni solution and its synergy with the others factors. Furthermore, in spite of the high complexity of the electrospinning process, the statistical model was able to describe the process with 95% confidence, therefore enabling one to precisely predict fiber diameter. Nanofiber formation was simulated using the results of the experimental design and validation tests were performed to minimize the fiber diameter.
Summary: The evolution of the photoinduced birefringence in thin films of narrow polymer fractions is studied and compared with the behavior of the non‐fractionated polymer. The Δnind value decreases by increasing the degree of polymerization ( ) within the oligomeric range but becomes independent of molecular weight starting from a of ≈70. Thermal pretreatment of the films results in higher photoinduced birefringence. The films show good stability of the photorecording.
Birefringence induced after 10 min, Δnind(600) and its growth rate at the same moment versus molecular weight. 相似文献
Summary: A drop‐on‐demand ink‐jet printer has been used to print a silver‐organic solution onto glass substrates. Conductive silver tracks were obtained by heat treatment of the ink‐jet printed deposits at temperatures ranging from 125 °C–200 °C in air. Resistivity values were found to have dropped to two to three times the theoretical resisitivity of bulk silver after temperatures of 150 °C and above were used.
Summary: New polymer gelators consisting of poly(propylene glycol) or poly(ethylene glycol) and L ‐lysine‐based low‐molecular‐weight gelators have been developed. These polymer gelators were synthesized according to a simple procedure with high reaction yield, and formed organogels in many organic solvents. The organogelation mechanism was proposed from the transmission electron microscopy and FTIR spectroscopy studies.
Structures of the polymer gelators synthesized here. 相似文献
Summary: Polyaniline (PANI) nanowires and sub‐micro/nanostructured dendrites are synthesized and immobilized on PP‐g‐PAA film surfaces via routine oxidative polymerization of aniline under different conditions, where grafting poly(acrylic acid) (PAA) served as a template and dopant, and SDS as a surfactant. The immobilized PANI enhances the surface hydrophilicity of the poly(propylene) (PP) films, and a superhydrophilic surface is obtained in this way. The mechanism of forming different morphologies of PANI and of correspondingly obtaining a superhydrophilic surface are briefly discussed.
FESEM image shows the PANI sub‐micro/nanostructured dendrites immobilized on the surfaces of PP films. The modified surface is highly hydrophilic with a water contact angle of 3°. 相似文献
A ‘grafting‐from’ approach to synthesize microparticle‐supported conjugated polyelectrolyte brushes is presented. Poly(3‐bromohexylthiophene) is selectively grown from monodisperse organosilica microparticles by surface‐initiated Kumada catalyst‐transfer polycondensation (SI‐KCTP) and then ionizable amino groups are introduced by a two‐step polymer analogous transformation. Optical properties of the resulting microparticle‐supported conjugated polyelectrolyte brushes were found to be dependent on the surrounding chemical environment and thus the particles are promising materials for sensor applications.
Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO113‐b‐PDMA82) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.
One‐dimensional methyl orange fibrils can be easily prepared. They are stable in acidic aqueous solutions and soluble in neutral water. When used to synthesize conducting polymer microtubules, the fibrils act as “hard templates” formally but as “soft templates” effectively. Microtubular structures of polypyrrole, polyaniline, and poly(3,4‐ethylenedioxythiophene) have been achieved successfully via such water‐soluble versatile templates.
