A simple and efficient Diels‐Alder (DA) reaction on carbon material has been demonstrated. The present work involves single and multiwall carbon nanotubes (CNTs), as well as Herringbone carbon nanofiber. The CNTs show a dual nature of reactivity in DA reaction, i.e., they behave both as dienophile and diene with furfuryl groups and maleic anhydride derivatives, respectively. Various functional groups, including alcohol, amine, epoxy, carboxylic and ester, have been introduced on the carbon materials. The results suggest that the reactivity of CNT in DA reaction may resemble the chemistry of small molecules.
A polymeric film of a biodegradable poly(p‐dioxanone) was grown from 490 nm silica particles by monolayer formation via self‐assembly of hydroxy‐terminated triethoxysilane and subsequent surface‐initiated ring‐opening polymerization of p‐dioxanone. The resulting silica/poly(p‐dioxanone) hybrid particles were characterized by means of 1H NMR spectroscopy, IR spectroscopy, thermogravimetric analysis, field‐emission scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy.
The synthesis of cationic mono‐(6‐O‐(1‐vinylimidazolium))‐ß‐cyclodextrin with toluenesulfonate as the corresponding anion is described. Free‐radical copolymerization of the resulting host–guest complex with N‐isopropylacrylamide or N,N‐diethylacrylamide yielded copolymers showing a temperature‐controlled solubility window in water. The impact of different anionic guests and salt concentrations on solubility behavior was investigated via turbidity measurements.
Self‐assembled hollow nanosphere composites of polyaniline and Au nanoparticles (PANI‐p‐TSA/Au) were chemically synthesized from solutions containing p‐toluenesulfonic acid (p‐TSA) with the addition of gold chloride trihydrate as the oxidant. The composite materials were characterized by SEM, TEM, and a range of spectroscopic methods. Spectroscopic characterizations confirmed that the polymeric product is a form of doped PANI, while electron diffraction and X‐ray diffraction showed that elemental Au was present in the PANI‐p‐TSA/Au nanocomposites. The room temperature electrical conductivity of the PANI‐p‐TSA/Au nanocomposites was two orders of magnitude greater than a PANI‐p‐TSA obtained in the presence of ammonium persulfate as the oxidant under the same conditions.
A novel comb‐like derivative CPEG‐g‐DNQ was prepared by incorporating light responsive 2‐diazo‐1,2‐naphthoquinone (DNQ) groups into the structure of comb‐like poly(ethylene glycol) (CPEG). DLS and TEM results showed that CPEG‐g‐DNQ self‐assembled into spherical micelles with an average size of about 135 nm in water. Upon exposure to light, the micelles could be disrupted because of the conversion of hydrophobic DNQ to hydrophilic 3‐indenecarboylic acid. Additionally, hydrophobic coumarin 102 was successfully loaded into the micelles and photo‐induced ON‐OFF release was demonstrated by fluorescence spectroscopy. MTT assay revealed that the micelles are biocompatible. These photo‐responsive micelles might have great potential for controlled release of hydrophobic drugs.
L,L ‐lactide (LA) and ε‐caprolactone (CL) block copolymers have been prepared by initiating the poly(ε‐caprolactone) (PCL) block growth with living poly(L,L ‐lactide) (PLA*). In the previous attempts to prepare block copolymers this way only random copolyesters were obtained because the PLA* + CL cross‐propagation rate was lower than that of the PLA–CL* + PLA transesterification. The present paper shows that application of Al‐alkoxide active centers that bear bulky diphenolate ligands results in efficient suppression of the transesterification. Thus, the corresponding well‐defined di‐ and triblock copolymers could be prepared.
A novel approach has been explored to prepare brain‐like polyaniline (PANI) nanostructures with many convolutions (140–170 nm in average diameter) using aniline/citric acid (CA) salt as the template and chlorine gas as the oxidant by a gas/solid reaction for the first time. The method provided here differs significantly from the traditional one in which the polymerization of PANI is usually carried out in acidic solution.
Optically active polymer containing P‐stereogenic bisphosphine as a repeating unit in the main was successfully synthesized. A coordinated borane on the phosphorus atom could be completely removed by an organic base under mild condition, and the successive reaction with Pd afforded the corresponding polymer complex. The chirality of P‐stereogenic centers was transferred to the m‐phenylene‐ethynylene linkers by complexation because of the prohibition of the rotary motion of the bisphosphine‐Pd unit.
New multifunctional copoly(2‐oxazoline) nanoparticles were prepared for cell studies. The polymer contains double‐bond side chains as potential reaction sites for “thio”‐click reactions as well as a fluorescein label covalently bound to the polymer backbone. Using the nanoprecipitation technique, spherical nanoparticles of 200–800 nm were obtained. Confocal laser scanning microscopy measurements revealed the cellular uptake of the nanoparticles.
We assess the elastic properties of PS‐b‐PAA vesicle membranes under different pH values by AFM force measurements. We find that based on the shell deformation theory, the values of the estimated apparent Young's modulus of the vesicle membranes decrease as the pH of the solution increases. The onset of the decrease of E coincides with the surface pKa determined from ζ‐potential measurements. This decrease of E at higher pH is attributed to electrostatic repulsion between the deprotonated PAA chains resulting in the thinning of the vesicle membrane.
Summary: Chain‐growth polycondensations of 3‐aminobenzoic acid methyl esters 1a and 1b , bearing a tri‐ or tetra(ethylene glycol) methyl ether unit on the amino group, respectively, were carried out with lithium hexamethyldisilazide (LiHMDS) as a base and phenyl 4‐methylbenzoate ( 2 ) as an initiator in THF at 0 °C. The poly(m‐benzamide)s obtained in the presence of N,N,N′,N′‐tetramethylethylenediamine (TMEDA) possessed narrow molecular weight distributions ( < 1.2) with molecular weights that were determined by the feed ratios of [ 1 ]0/[ 2 ]0. Poly 1a and poly 1b were each soluble in water and exhibited a lower critical solution temperature (LCST) in water. Furthermore, the phase separation in water depended on the length of the oligo(ethylene glycol) side chain and on the molecular weight and molecular weight distribution of poly 1 .
Summary: An enzymatic one‐pot procedure has been developed for the synthesis of difunctional polyesters containing terminal thiols and acrylates. Candida antarctica lipase B was used as a catalyst for the ring‐opening polymerization of ω‐pentadecalactone. The polymerization was initiated with 6‐mercaptohexanol, then terminated with γ‐thiobutyrolactone or vinyl acrylate to create two types of difunctional polyesters with a very high content of thiol‐thiol or thiol‐acrylate end‐groups.
A Y‐shaped amphiphilic fluorinated monomer, 1‐(1H,1H,2H,2H‐perfluorodecyloxy)‐3‐(3,6,9‐trioxadecyloxy)‐propan‐2‐yl acrylate has been synthesized and its polymerization by reversible addition–fragmentation chain transfer (RAFT) homopolymerization has been investigated. The results show that the molecular weights of the polymers are controlled and all the molecular weight distributions are lower than 1.4. Well‐defined copolymers with 2‐(N,N‐dimethylamino)ethyl methacrylate have been prepared by RAFT polymerization, and the surface properties of the block and random copolymers have been examined by contact angle measurement for water and hexadecane. It has been found that the surfaces of the block copolymers simultaneously exhibit excellent anti‐fog and oil‐repellent properties.
A cationic water‐soluble polyfluorene (P2) containing a high density of tetraalkylammonium side chains in polymer backbone was synthesized and characterized. The polymer shows excellent water solubility up to 100 mg · mL−1 as well as high photoluminescence (PL) quantum yield of 44% in water. The relatively high cationic density and appropriate side chain length of the polymer are the key factors to achieve such high water solubility. The reduction potential of P2 is decreased as compared with its neutral polymer, reflecting the enhanced electron injection abilities. The standard NPB/Alq3 device using such a polymer as the electron injection layer shows nearly three‐fold enhancement in the electroluminescence (EL) efficiency.
A novel and powerful method of microstructure control in polyolefins is presented. By dispersing tiny amounts of sorbitol derivatives in the polymer, the subsequent crystal growth can be controlled with modest prior flow‐fields; in particular high levels of preferred orientation are generated in the resultant crystals. Under shear flow, the additive forms highly extended crystals which lie parallel to the flow‐field and which serve to direct the crystallisation of the polymer leading to a massive amplification of the anisotropy present in the melt.
TEM image of a carbon replica taken from an etched surface of a PE sample containing 1% of DBS. 相似文献
Summary: Novel hyperbranched poly(amine‐ester) (HPAE) cross‐linked films were prepared by cross‐linking the terminal hydroxyl groups of HPAE using glutaraldehyde (GA). Atom force microscope and scanning electron microscope revealed their smooth surfaces, dense and homogenous matrices. Property characterizations indicated that these cross‐linked films had good hydrophilicity, relative low protein adsorption, and high tensile strength. Also, their swelling behavior varied with the solvent.
Structure of the hyperbranched poly(amine‐ester). 相似文献
The self‐assembly of two types of linear ABA triblock copolymers confined in cylindrical nanopores is studied using simulated annealing. The effects of pore size and block copolymer chain architecture on morphology, chain conformations and bridging fraction are investigated. For the bulk cylinder‐forming copolymers, novel structures such as helices and stacked toroids form, which depend sensitively on the pore size. Several significant differences between the two types of copolymers are predicted and explained based on the differences in their chain conformations and chain architectures. A simple model is proposed to explain the mean square radius of gyration for the bridge and loop chains.
A series of amphiphilic poly(L ‐leucine)‐block‐poly(ethylene glycol)‐block‐poly(L ‐leucine) (PLL‐PEG‐PLL) hybrid triblock copolymers have been synthesized. All the blocks in this system have good biocompatibility and low toxicity. The PLL‐PEG‐PLL copolymers could self‐assemble into micelles with PLL blocks as the hydrophobic core and PEG blocks as the hydrophilic shell, which were characterized by FT‐IR, 1H NMR, and transmission electron microscopy analysis. The critical micellar concentration of the copolymer was 95.0 mg · L−1. The circular dichroism spectrum shows that the PLL segments adopt a unique α‐helical conformation, which is found to play an important role in controlling the drug release rate. The drug release could be effectively sustained by encapsulation in the micelles. The copolymers may have potential applications in drug delivery.
Summary: Amphiphilic hyperbranched polyester (H20‐AM) with methacrylate end groups was synthesized based on hyperbranched aliphatic polyester (Boltorn™ H20). Narrow‐dispersed crosslinkable vesicles were obtained by dissolving H20‐AM in water, and characterized by laser light scattering and TEM. The hollow structural vesicle is composed of around 350 H20‐AM molecules, having a radius of around 40 nm and of 1.9 × 106 g · mL−1. The vesicles were fixed by crosslinking of methacrylate groups to form shape‐persistent structures.
TEM images of the crosslinked vesicles at lower magnification. 相似文献
Novel poly(2‐(3‐sulfo)benzoyl‐1,4‐phenylene)‐block‐polynaphthalimide (PSP‐b‐PI) copolymers were successfully synthesized by Ni(0)‐catalyzed copolymerization of 2,5‐dichloro‐3′‐sulfo‐benzophenone and dichloro‐terminated naphthalimide oligomer. The membranes exhibited a microphase‐separated structure and good hydrolytic stability at 130 °C. They showed a fairly strong anisotropy of membrane swelling with much smaller in‐plane swelling, but a rather weak anisotropy of proton conductivity. The membranes had a fairly high through‐plane conductivity in water and even under low relative humidity. The PSP‐b‐PI copolymer with an IEC of 1.5 meq · g−1 showed high PEFC performance due to the high through‐plane conductivity.
