Stamping plasmonic nanoarrays on SERS‐supporting platforms

The dielectric property of a nanoparticle‐supporting film has recently garnered attention in the fabrication of plasmonic surfaces. A few studies have shown that the localized surface plasmon resonance (LSPR), and hence surface‐enhanced Raman scattering (SERS), strongly depends on the substrate refractive index. In order to create higher efficiency SERS‐active surfaces, it is therefore necessary to consider the substrate property along with nanoparticle morphology. However, due to certain limitations of conventional lithography, it is often not feasible to create well‐defined plasmonic nanoarrays on a substrate of interest. Here, an additive nanofabrication technique, i.e., nanotransfer printing (nTP), is implemented to integrate electron beam lithography (EBL) defined high‐aspect‐ratio nanofeatures on a variety of SERS‐supporting surfaces. With the aid of suitable surface chemistries, a wide range of plasmonic particles were successfully integrated on surfaces of three physically and chemically distinct dielectric materials, namely, polydimethyl siloxane (PDMS), SU‐8 photoresist, and glass surfaces, using silicon‐based relief pillars. These nTP‐created metal nanoparticles strongly amplify the Raman signal and complement the selection of suitable substrates for better SERS enhancement. Our experimental observations are also supported by theoretical calculations. The implementation of nTP to stamp out metal nanoparticles on a multitude conventional/unconventional substrates has novel applications in designing in‐built plasmonic microanalytical devices for SERS sensing and other related photonic studies. Copyright © 2011 John Wiley & Sons, Ltd.     

Reusable plasmonic substrates fabricated by interference lithography: a platform for systematic sensing studies

Surface‐enhanced Raman scattering (SERS) has become increasingly popular in the scientific and industrial communities because of its analytical capabilities and potential to study fundamentals in plasmonics. Although under certain conditions extremely high sensitivity is possible, the practical use of SERS is frequently limited by instability and poor reproducibility of the enhancement factor. For analytical applications or for comparative measurements to enable the distinction between electromagnetic and chemical enhancement, the development of standardized and recyclable SERS substrates, having uniform and persistent performance, is proposed. To this end, we have fabricated periodic nanoslit arrays using extreme ultraviolet lithography that provide average large (2*10⁶) and homogeneous SERS enhancement factors with a spot‐to‐spot variability of less than 3%. In addition, they are reusable without any degradation or loss of enhancement. The fabrication of such arrays consists of two steps only, lithographic patterning followed by metal evaporation. Both processes may be performed over areas of several square mm on any planar substrate. The sensor capabilities were demonstrated by substrates with monomolecular films of several different thiols. The concept of reusable SERS substrates may open a powerful platform within an analytical tool and in particular for systematic SERS studies for the investigation of fundamental parameters such as chemical enhancement, surface selection rules, and molecular alignment. Copyright © 2012 John Wiley & Sons, Ltd.     

Silver-coated Si nanograss as highly sensitive surface-enhanced Raman spectroscopy substrates

We created novel surface-enhanced Raman spectroscopy (SERS) substrates by metalization (Ag) of Si nanograss prepared by a Bosch process which involves deep reactive ion etching of single crystalline silicon. No template or lithography was needed for making the Si nanograss, thus providing a simple and inexpensive method to achieve highly sensitive large-area SERS substrates. The dependence of the SERS effect on the thickness of the metal deposition and on the surface morphology and topology of the substrate prior to metal deposition was studied in order to optimize the SERS signals. We observed that the Ag-coated Si nanograss can achieve uniform SERS enhancement over large area (∼1 cm ×1 cm) with an average EF (enhancement factor) of 4.2×10⁸ for 4-mercaptophenol probe molecules. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Fabrication of CoPt magnetic nanodot arrays by electrodeposition process

We attempted to fabricate patterned media using the electrochemical deposition process along with nanopatterned substrates prepared by the electron beam lithography (EBL), UV nanoimprint lithography (UV-NIL), and spin-on-glass nanoimprint lithography (SOG-NIL) approaches. CoPt was electrodeposited into the nanopatterned substrates and chemical mechanical polishing was carried out to planarize the surface. It was clarified that CoPt nanodot arrays were successfully deposited into the patterned nanopores fabricated by UV-NIL and SOG-NIL as well as by EBL with high area selectivity and uniformity. The density of the CoPt nanodot arrays deposited into the nanopores fabricated by EBL was equal up to an areal recording density of 250 Gbit/in².     

Raman spectral detection and assessment of thin organic layers on metal substrates: systematic approach from substrate preparation to map evaluation

Raman spectral mapping of thin organic layers on metal substrates is an important analytical tool to characterize these systems. Surface‐enhanced Raman scattering (SERS) spectroscopy is a suitable technique for analysis of such layers. Development of new SERS‐active surfaces with repeatable properties and without disturbing adsorbed species is one of the important steps for reliable assessment of the thin organic layers designed. This paper presents new SERS‐active substrates suitable for both macro (millimeter scale) and microscopic (micrometer scale) spectral mapping, which allow easy regeneration for repetitive experiments. Both gold and silver SERS‐active surfaces prepared by electrochemical deposition were tested. Complete map data evaluation utilities were newly designed and applied, using both ordinarily used and newly modified mathematical algorithms and chemometric procedures. Evaluation of data starts with finite impulse response (FIR) filtration algorithms to eliminate spectral interferences in individual spectra. Principal component analysis was used for transformation of multidimensional data to understandable dimensions. Various mathematical/statistical techniques were then used for data visualization as spectral maps and for similarity testing. Copyright © 2008 John Wiley & Sons, Ltd.     

Nanostructured gold surfaces as reproducible substrates for surface‐enhanced Raman spectroscopy

Raman spectroscopy is a common tool for the qualitative and quantitative chemical analysis of molecules. Although the unique identification of molecules is possible via their vibrational lines, high concentrations (mmol/l) are needed for their nonresonant excitation owing to their low scattering cross section. The intensity of the Raman spectra is amplified by the use of the surface‐enhanced Raman scattering (SERS) technique. While the use of silver sols results only in a limited reproducibility of the Raman line intensities, lithographically designed, nanostructured gold surfaces used as SERS‐active substrates should, in principle, combine the high sensitivity with better reproducibility. For this purpose, we have produced gratings of gold dots on Si(001) surfaces by means of electron beam lithography. Qualitative and quantitative investigations of crystal violet (CV) performed using nanostructured surfaces give high reproducibility and enhancement of the Raman lines. The substrates are reusable after cleaning; all results presented could be obtained from a single SERS substrate. For the experiments very low laser powers were used. Copyright © 2006 John Wiley & Sons, Ltd.     

银纳米颗粒阵列的表面增强拉曼散射效应研究

利用具有高密度拉曼热点的金属纳米结构作为表面增强拉曼散射(SERS)基底,可以显著增强吸附分子的拉曼信号.本文通过阳极氧化铝模板辅助电化学法沉积制备了高密度银(Ag)纳米颗粒阵列;利用扫描电子显微镜和反射谱表征了样品的结构形貌和表面等离激元特性;用1, 4-苯二硫醇(1, 4-BDT)为拉曼探针分子,研究了Ag纳米颗粒阵列的SERS效应.通过优化沉积时间,制备出高SERS探测灵敏度的Ag纳米颗粒阵列,检测极限可达10~(-13)mol/L;时域有限差分法模拟结果证实了纳米颗粒间存在强的等离激元耦合作用,且发现纳米颗粒底端的局域场增强更大.研究结果表明Ag纳米颗粒阵列可作为高效的SERS基底.     

The SERS response of semiordered Ag nanorod arrays fabricated by template oblique angle deposition

Semiordered Ag nanorod arrays are fabricated by template oblique angle deposition (OAD) using regular Au nano‐post arrays with different diameters as seed patterns. The Au nano‐post arrays do not give an observable surface‐enhanced Raman scattering (SERS) activity under our detection configuration, whereas the patterned Ag nanorod arrays can produce a very strong SERS signal. These SERS intensities increase monotonically with the decrease in the diameter and separation of the Ag nanorods, which demonstrates that one can improve the SERS detection by tuning the diameter and separation of the Ag nanorods, and the template OAD method can help produce more uniform, reproducible, and sensitive Ag nanorod SERS substrates. Copyright © 2010 John Wiley & Sons, Ltd.     

铜纳米线阵列的表面增强拉曼光谱和AFM研究

通过以有序的多孔氧化铝为模板,利用交流电在孔中沉积金属铜,并以此作为ＳＥＲＳ活性基底。原子力显微镜（ＡＦＭ）研究了氧化铝溶解过程中铜纳米线形貌,共焦显微拉曼则研究表面吸附ＳＣＮ 的ＳＥＲＳ光谱的变化。结果表明：铜纳米线表面ＳＥＲＳ强度和纳米金属在表面直立的高度有关;而其频率和直立的高度无关。ＳＣＮ 吸附在纳米线上比普通电化学粗糙的电极表面ＳＥＲＳ强度高,说明纳米线（点）有望成为一种活性高,稳定性好的ＳＥＲＳ基底。     

PATP在Ag/TiO_2纳米管基底上的表面增强拉曼散射和光催化过程研究

表面增强拉曼散射(SERS)是一种超灵敏、高选择性的分析方法,越来越受到人们的关注。对巯基苯胺(PATP)由于其易吸附在大多数SERS基底表面,并可以产生极强的SERS信号,因此常被用作SERS的探针分子。二氧化钛(TiO_2)是一种目前常用的光催化剂,但是其催化效率仍有待提高。将贵金属与TiO_2复合是提高其催化效率的有效手段。本文采用电化学阳极氧化法制备了二氧化钛纳米管(TiO_2NTs),并采用光化学还原方法在表面沉积了贵金属银,制备了一种同时具有SERS和催化性能的双功能基底,即银纳米粒子修饰的二氧化钛纳米管(Ag/TiO_2NTs),研究了PATP分子在该基底上的光催化过程,并与在银镜基底上的光催化过程进行了比较。我们发现,Ag/TiO_2NTs基底上的PATP在催化过程中峰强度逐渐减弱,但没有新峰的出现;而在银镜基底上PATP的峰强度随光照时间却几乎没有变化,证明了PATP分子在Ag/TiO_2 NTs上的光催化降解过程。本文还对Ag/TiO_2NTs上PATP的催化过程进行了动力学分析,结果表明PATP在该基底表面的催化反应为一级反应。     

二维银球腔阵列的制备及其在SERS检测中的应用

以密堆积的700 nm单分散聚苯乙烯微球为模板,采用多电流阶跃方法制备了不同深度的二维有序微/纳尺度银球腔阵列。通过扫描电子显微镜,反射紫外对球腔形貌及表面等离子体共振进行了表征,以对氨基苯硫酚及罗丹明6G为探针分子进行了表面增强拉曼光谱(SERS)的研究。结果表明,通过控制电化学沉积的条件可以实现对球腔形貌的控制。以该种球腔阵列作为SERS基底,其增强因子可达107,并具有良好的信号重现性,信号间相对标准偏差小于8%。该基底用于对罗丹明6G的定量检测,检测限可达0.1 ng·mL-1。     

Fabrication of silver-coated silicon nanowire arrays for surface-enhanced Raman scattering by galvanic displacement processes

Silver-coated silicon nanowire (SiNW) arrays were prepared utilizing galvanic displacement processes consisting of three steps: galvanic displacement deposition of silver particles using a HF-AgNO₃ or NH₄F-AgNO₃ aqueous solution; formation of SiNW arrays by a silver-assisted chemical etching process conducted in the HF-H₂O₂ aqueous solution; deposition of silver particles on the SiNW arrays from the NH₄F-AgNO₃ aqueous solution. The effects of the morphology of pre-deposited silver particles and deposition solution on the formation of silver-coated SiNW arrays were discussed. Surface-enhanced Raman scattering (SERS) performances have been studied using Rhodamine 6G (R6G) probe molecules on the silver-coated SiNW substrates.     

可循环使用表面增强拉曼散射基底研究进展

表面增强拉曼散射(SERS)技术克服了拉曼光谱灵敏度低的缺点,可以获得常规拉曼光谱不易得到的分子结构信息,成为分子甚至单一分子痕量检测的一个重要手段,在生命科学、分析化学等领域得到了广泛的应用。SERS基底是SERS检测中的核心部件,只有少量特殊处理的贵金属才具有较强SERS效应,同时这些传统SERS基底一般都是一次性使用,这给实际使用造成资源的浪费。在简要介绍SERS光谱发展的基础上,重点介绍了近期在可循环SERS基底的制备和应用作一述评,并对可循环SERS基底的研究和发展做了展望。     

Use of atomic layer deposition to improve the stability of silver substrates for in situ,high‐temperature SERS measurements

A method to stabilize silver surface‐enhanced Raman spectroscopy (SERS) substrates for in situ, high‐temperature applications is demonstrated. Silver island films grown by thermal evaporation were coated with a thin layer (from 2.5 to 5 nm) of alumina by atomic layer deposition (ALD), which protects and stabilizes the SERS‐active substrate without eliminating the Raman enhancement. The temporal stability of the alumina‐coated silver island films was examined by measurement of the Raman intensity of rhodamine 6G molecules deposited onto bare and alumina‐coated silver substrates over the course of 34 days. The coated substrates showed almost no change in SERS enhancement, while the uncoated substrates exhibited a significant decrease in Raman intensity. To demonstrate the feasibility of the alumina‐coated silver substrate as a probe of adsorbates and reactions at elevated temperatures, an in situ SERS measurement of calcium nitrate tetrahydrate on bare and alumina‐coated silver was performed at temperatures ranging from 25 to 400 °C. ALD deposition of an ultrathin alumina layer significantly improved the thermal stability of the SERS substrate, thus enabling in situ detection of the dehydration of the calcium nitrate tetrahydrate at an elevated temperature. Despite some loss of Raman signal, the coated substrate exhibited greater thermal stability compared to the uncoated substrate. These experiments show that ALD can be used to synthesize stable SERS substrates capable of measuring adsorbates and processes at high temperature. Copyright © 2009 John Wiley & Sons, Ltd.     

Physical mechanisms behind the SERS enhancement of pyramidal pit substrates

In this paper we theoretically consider the physical mechanisms behind the surface‐enhanced Raman scattering (SERS) enhancement produced by commercially available Klarite substrates, which consist of rectangular arrays of micrometre‐sized pyramidal pits in silicon with a thin gold coating. Full three‐dimensional numerical simulations of the pits are conducted for both a real gold metal coating and a perfect electrical conductor (PEC) to determine whether the SERS enhancement is due to diffraction or plasmon effects. The pit apex angle and metal coating thickness are also varied to determine whether it is possible to further enhance the SERS signal by optimising the structural parameters of these substrates. By decreasing the film thickness and adjusting the apex angle, it is possible to achieve an enhancement almost double that of a standard Klarite substrate. Copyright © 2010 John Wiley & Sons, Ltd.     

Pulsed laser deposition of uniform semiconductor nanodot arrays

Uniform arrays of silicon (Si), gallium arsenide (GaAs) and zinc oxide (ZnO) nanodots have been deposited using Pulsed Laser Deposition (PLD) technique combined with a contact mask consisting of nano-holes fabricated by E-beam lithography (EBL). These nanocrystalline semiconductor nanodots have been deposited by PLD on Si and GaAs substrates at room temperature. Characterization of the nanodots has been carried out using different techniques including X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), Auger Electron Spectroscopy (AES), and Raman spectroscopy. This work demonstrates a novel technique for deposition of uniform array of semiconductor nanostructures using a contact mask at room temperature for photonic applications.     

A comparative study of surface‐enhanced Raman scattering from silver‐coated anodic aluminum oxide and porous silicon

Three types of Ag‐coated arrays from porous anodic aluminum oxide (AAO) were prepared and studied as substrates for surface‐enhanced Raman scattering (SERS). They were compared with Ag‐coated porous silicon (PSi) samples. AAO‐based substrates were prepared by the vapor deposition of silver directly onto the surface of porous AAO with different morphologies of the pores, whereas SERS‐active island films on the PSi were prepared by immersion plating. The resulting metallic nanostructures were characterized by UV‐vis absorption spectroscopy and scanning electron microscopy (SEM). Thermal evaporation leads to the formation of granular arrays of Ag nanoparticles on the surface of AAO. SERS activity of the substrates was tested using water‐soluble cationic Zn(II)‐tetrakis (4‐N‐methylpyridyl) porphyrin (ZnTMPyP4) as a probe molecule. The results indicate that all AAO‐based substrates studied here exhibit some degree of SERS activity. Noteworthy, for excitation at 532 nm, signals from AAO‐based substrates were comparable with those from the PSi‐based ones, whereas for 441.6 nm excitation they were about twice higher. The strongest SERS‐enhancement at 441.6 nm excitationwas provided by the AAO substrates with silver deposited on the monolith (originally nonporous) side of AAO. Preferential SERS‐enhancement of the bands ascribed to the vibrations of the N‐methylpyridinium group of ZnTMPyP4 when going to blue excitation was found. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface-enhanced Raman scattering (SERS) activity of Ag, Au and Cu nanoclusters on TiO2-nanotubes/Ti substrate

Tubular arrays of TiO₂ nanotubes (ranging in diameter from 40 to 110 nm) on a Ti substrate were used as a support for Ag, Au or Cu deposits obtained by the sputter deposition technique, where the amount of metal varied from 0.01 to 0.2 mg/cm². Those composite supports were intended for surface-enhanced Raman scattering (SERS) investigations. Composite samples were studied with the aid of scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) to reveal their characteristic morphological and chemical features. Raman spectra of pyridine (as a probe molecule) were measured at different cathodic potentials ranging from −0.2 down to −1.2 V after the pyridine had been adsorbed on the metal-covered TiO₂ nanotube/Ti substrates. In addition, SERS spectra on a bulk standard activated Ag, Au and Cu substrates were also measured. The SERS activity of the composite samples was strongly dependent on the amount of metal deposit, e.g. at and above 0.06 mg Ag/cm², the intensity of SERS signal was even higher than that for the Ag reference substrate. The high activity of these composites is mainly a result of their specific morphology. The high SERS sensitivity on the surface morphology of the substrate made it possible to monitor very small temporal changes in the Ag metal clusters. This rearrangement was not detectable with microscopic (SEM) or microanalytical (AES) methods. The SERS activity of Au or Cu clusters was distinctly lower than those of Ag. The spectral differences exhibited by the three kinds of composites as compared to the reference metal samples are discussed.     

Large‐area Ag nanorod array substrates for SERS: AAO template‐assisted fabrication,functionalization, and application in detection PCBs

Highly ordered arrays of thiolated β‐cyclodextrin (HS‐β‐CD) functionalized Ag‐nanorods (Ag‐NRs) with plasmonic antennae enhancement of electrical field have been achieved for encapsulation and rapid detection of polychlorinated biphenyls (PCBs). The large‐area ordered arrays of rigid Ag‐NRs supported on copper base were fabricated via porous anodic aluminum oxide (AAO) template‐assisted electrochemical deposition. The inter‐nanorod gaps between the neighboring Ag‐NRs were tuned to sub‐10 nm by thinning the pore‐wall thickness of the AAO template using diluted H₃PO₄. The nearly perfect large‐area ordered arrays of Ag‐NRs supported on copper base render these systems excellent in surface‐enhanced Raman scattering (SERS) performance with uniform electric field enhancement, as testified by the SERS spectra and Raman mappings of rhodamine 6 G. Furthermore, the Ag‐NRs were functionalized with HS‐β‐CD molecules so as to capture the apolar PCB molecules in the hydrophobic cavity of the CD. Compared to the ordinary undecorated SERS substrates, the HS‐β‐CD modified Ag‐NR arrays exhibit better capture ability and higher sensitivity in rapid detection of PCBs. Copyright © 2012 John Wiley & Sons, Ltd.     

A hybrid substrate for surface‐enhanced Raman scattering spectroscopy: coupling metal nanoparticles to strong localised fields on a micro‐structured surface

Electromagnetic coupling between localised plasmons on metal nanoparticles and the strong localised fields on a micro‐structured surface is demonstrated as a means to increase the enhancement factor in surface‐enhanced Raman scattering (SERS) spectroscopy. Au nanoparticles of diameter 20 nm were deposited on a micro‐structured Au surface consisting of a periodic array of square‐based pyramidal pits (Klarite). The spectra of 4‐aminothiophenol (4‐ATP) were compared before and after deposition of Au nanoparticles on the micro‐structured surface. The addition of Au nanoparticles is shown to provide significantly higher signal intensities, with improvements of the order of ∼10³ per molecule compared with spectra obtained from the micro‐structured substrate alone. This hybrid approach offers promise for combining nanoparticles with micro‐ and nano‐structured surfaces in order to design SERS substrates with higher sensitivities. Copyright © 2011 John Wiley & Sons, Ltd.